Download or read book Developments in Surface Contamination and Cleaning written by Rajiv Kohli and published by Elsevier. This book was released on 2008-01-10 with total page 1209 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface contamination is of cardinal importance in a host of technologies and industries, ranging from microelectronics to optics to automotive to biomedical. Thus, the need to understand the causes of surface contamination and their removal is very patent. Generally speaking, there are two broad categories of surface contaminants: film-type and particulates. In the world of shrinking dimensions, such as the ever-decreasing size of microelectronic devices, there is an intensified need to understand the behavior of nanoscale particles and to devise ways to remove them to an acceptable level. Particles which were functionally innocuous a few years ago are ôkiller defectsö today, with serious implications for yield and reliability of the components. This book addresses the sources, detection, characterization and removal of both kinds of contaminants, as well as ways to prevent surfaces from being contaminated. A number of techniques to monitor the level of cleanliness are also discussed. Special emphasis is placed on the behaviour of nanoscale particles. The book is amply referenced and profusely illustrated.• Excellent reference for a host of technologies and industries ranging from microelectronics to optics to automotive to biomedical.• A single source document addressing everything from the sources of contamination to their removal and prevention.• Amply referenced and profusely illustrated.
Download or read book Developments in Surface Contamination and Cleaning Volume 7 written by Rajiv Kohli and published by William Andrew. This book was released on 2014-11-18 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt: As device sizes in the semiconductor industries are shrinking, they become more vulnerable to smaller contaminant particles, and most conventional cleaning techniques employed in the industry are not as effective at smaller scales. The book series Developments in Surface Contamination and Cleaning as a whole provides an excellent source of information on these alternative cleaning techniques as well as methods for characterization and validation of surface contamination. Each volume has a particular topical focus, covering the key techniques and recent developments in the area. The chapters in this Volume address the sources of surface contaminants and various methods for their collection and characterization, as well as methods for cleanliness validation. Regulatory aspects of cleaning are also covered. The collection of topics in this book is unique and complements other volumes in this series. Edited by the leading experts in small-scale particle surface contamination, cleaning and cleaning control, these books will be an invaluable reference for researchers and engineers in R&D, manufacturing, quality control and procurement specification situated in a multitude of industries such as: aerospace, automotive, biomedical, defense, energy, manufacturing, microelectronics, optics and xerography. Provides a state-of-the-art survey and best-practice guidance for scientists and engineers engaged in surface cleaning or handling the consequences of surface contamination Addresses the continuing trends of shrinking device size and contamination vulnerability in a range of industries, spearheaded by the semiconductor industry and others Includes new regulatory aspects
Download or read book Developments in Surface Contamination and Cleaning Volume 12 written by Rajiv Kohli and published by Elsevier. This book was released on 2019-06-08 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Surface Contamination and Cleaning: Methods for Assessment and Verification of Cleanliness of Surfaces and Characterization of Surface Contaminants, Volume Twelve, the latest release in the Developments in Surface Contamination and Cleaning series, provides best practices on determining surface cleanliness. Chapters include an introduction to the nature and size of particles, a discussion of cleanliness levels, detailed coverage of measurement methods, characterization methods and analytical methods for evaluating surfaces, and an overview of analysis methods for various contaminants. As a whole, the series creates a unique and comprehensive knowledge base for those in research and development in a variety of industries. Manufacturing, quality control and procurement specification professionals in the aerospace, automotive, biomedical, defense, energy, manufacturing, microelectronics, optics and xerography industries will find this book to be very helpful. In addition, researchers in an academic setting will also find these volumes excellent source books. - Includes an extensive listing, with a description of available methods for the assessment of surface cleanliness - Provides a single source of information on methods for verification of surface cleanliness - Serves as a guide to the selection, assessment and verification of methods for specific applications
Download or read book Developments in Surface Contamination and Cleaning Applications of Cleaning Techniques written by Rajiv Kohli and published by Elsevier. This book was released on 2018-11-27 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Surface Contamination and Cleaning: Applications of Cleaning Techniques, Volume Eleven, part of the Developments in Surface Contamination and Cleaning series, provides a guide to recent advances in the application of cleaning techniques for the removal of surface contamination in various industries, such as aerospace, automotive, biomedical, defense, energy, manufacturing, microelectronics, optics and xerography. The material in this new edition compiles cleaning applications into one easy reference that has been fully updated to incorporate new applications and techniques. Taken as a whole, the series forms a unique reference for professionals and academics working in the area of surface contamination and cleaning. - Presents the latest reviewed technical information on precision cleaning applications as written by established experts in the field - Provides a single source on the applications of innovative precision cleaning techniques for a wide variety of industries - Serves as a guide to the selection of precision cleaning techniques for specific applications
Download or read book Developments in Surface Contamination and Cleaning Volume 3 written by Rajiv Kohli and published by William Andrew. This book was released on 2011-03-25 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: The contributions in this volume cover methods for removal of particle contaminants on surfaces. Several of these methods are well established and have been employed in industrial applications for a long time. However, the ever- higher demand for removal of smaller particles on newer substrate materials is driving continuous development of the established cleaning methods and alternative innovative methods for particle removal. This book provides information on the latest developments in this topic area. - Comprehensive coverage of innovations in surface contamination and cleaning - Written by established experts in the contamination and cleaning field - Each chapter is a comprehensive review of the state of the art - Case studies included
Download or read book Developments in Surface Contamination and Cleaning Vol 5 written by Rajiv Kohli and published by William Andrew. This book was released on 2012-12-31 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this series, Rajiv Kohli and Kash Mittal have brought together the work of experts from different industry sectors and backgrounds to provide a state-of-the-art survey and best-practice guidance for scientists and engineers engaged in surface cleaning or dealing with the consequences of surface contamination. This volume complements Volumes 3 and 4 of this series, which focused largely on particulate contaminants. The expert contributions in this volume cover methods for removal of non-particulate contaminants, such as metallic and non-metallic thin films, hydrocarbons, toxic and hazardous chemicals, and microbiological substances, as well as contamination monitoring in pharmaceutical manufacturing, and an innovative method for characterization at the nanoscale. - Comprehensive coverage of innovations in surface contamination and cleaning - Written by established experts in the contamination and cleaning field - Each chapter is a comprehensive review of the state of the art - Case studies included
Download or read book Developments in Surface Contamination and Cleaning Vol 1 written by Rajiv Kohli and published by William Andrew. This book was released on 2015-11-12 with total page 898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Surface Contamination and Cleaning, Vol. 1: Fundamentals and Applied Aspects, Second Edition, provides an excellent source of information on alternative cleaning techniques and methods for characterization of surface contamination and validation. Each volume in this series contains a particular topical focus, covering the key techniques and recent developments in the area. This volume forms the heart of the series, covering the fundamentals and application aspects, characterization of surface contaminants, and methods for removal of surface contamination. In addition, new cleaning techniques effective at smaller scales are considered and employed for removal where conventional cleaning techniques fail, along with new cleaning techniques for molecular contaminants. The Volume is edited by the leading experts in small particle surface contamination and cleaning, providing an invaluable reference for researchers and engineers in R&D, manufacturing, quality control, and procurement specification in a multitude of industries such as aerospace, automotive, biomedical, defense, energy, manufacturing, microelectronics, optics and xerography. - Provides best-practice guidance for scientists and engineers engaged in surface cleaning or those who handle the consequences of surface contamination - Addresses the continuing trends of shrinking device size and contamination vulnerability in a range of industries as spearheaded by the semiconductor industry - Presents state-of-the-art survey information on precision cleaning and characterization methods as written by a team of world-class experts in the field
Download or read book Developments in Surface Contamination and Cleaning Volume 4 written by Rajiv Kohli and published by William Andrew. This book was released on 2011-09-26 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this series Rajiv Kohli and Kash Mittal have brought together the work of experts from different industry sectors and backgrounds to provide a state-of-the-art survey and best-practice guidance for scientists and engineers engaged in surface cleaning or handling the consequences of surface contamination. The expert contributions in this volume cover important fundamental aspects of surface contamination that are key to understanding the behavior of specific types of contaminants. This understanding is essential to develop preventative and mitigation methods for contamination control. The coverage complements the treatment of surface contamination in vol.1, Fundamental and Applied Aspects. This volume covers: Sources and Generation of Particles; Manipulation Techniques for Particles on Surfaces; Particle Deposition and Rebound; Particle Behavior in Liquid Systems; Biological and Metallic Contamination; and includes a comprehensive list of current standards and resources. - Comprehensive coverage of innovations in surface contamination and cleaning - Written by established experts in the contamination and cleaning field - Each chapter is a comprehensive review of the state of the art - Case studies included
Download or read book Self Cleaning Materials and Surfaces written by Walid A. Daoud and published by John Wiley & Sons. This book was released on 2013-07-12 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: With increasing demand for hygienic, self-disinfecting and contamination free surfaces, interest in developing self-cleaning protective materials and surfaces has grown rapidly in recent times. This new title comprises of invited chapters from renowned researchers in the area of self-cleaning nano-coatings and the result is a comprehensive review of current research on both hydrophobic and hydrophilic (photocatalytic effect) self-cleaning materials.
Download or read book Introduction to Contamination Control and Cleanroom Technology written by Matts Ramstorp and published by John Wiley & Sons. This book was released on 2008-07-11 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contamination control is being used by more and more industries where the highest level of cleanliness and hygiene is of vital importance. This book covers the basic principles of contamination control and cleanroom technology from a holistic point of view. It deals with cleanliness and hygiene and their effects on the outcome of a process, reflecting the latest results from both scientific and practical points of view. The following topics are covered: contaminants and how they are measured cleanrooms and clean zones cleaning and decontamination cleanroom clothing the impact of people on cleanliness. Intended as an introduction to the area of contamination control, the text is also an excellent source of knowledge for people with both theoretical and practical experience. The Swedish version has been used for a long time within the Nordic countries as a basic training textbook within the pharmaceutical, microelectronics, food and beverage, optics and many other industries.
Download or read book Developments in Surface Contamination and Cleaning Methods for Surface Cleaning written by Rajiv Kohli and published by William Andrew. This book was released on 2016-11-04 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Surface Contamination and Cleaning: Methods for Surface Cleaning, Volume 9, part of the Developments in Surface Contamination and Cleaning series provide a state-of-the-art guide to the current knowledge on the behavior of film-type and particulate surface contaminants and their associated cleaning methods. This newest volume in the series discusses methods of surface cleaning of contaminants and the resources that are needed to deal with them. Taken as a whole, the series forms a unique reference for professionals and academics working in the area of surface contamination and cleaning. A strong theme running through the series is that of surface contamination and cleaning at the micro and nano scales. - Provides a comprehensive coverage of innovations in surface cleaning - Written by established experts in the surface cleaning field, presenting an authoritative resource - Contains a comprehensive review of the state-of-the-art, including case studies to enhance the learning process
Download or read book Developments in Surface Contamination and Cleaning Volume 8 written by Rajiv Kohli and published by William Andrew. This book was released on 2014-11-19 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: As device sizes in the semiconductor industries shrink, devices become more vulnerable to smaller contaminant particles, and most conventional cleaning techniques employed in the industry are not effective at smaller scales. The book series Developments in Surface Contamination and Cleaning as a whole provides an excellent source of information on these alternative cleaning techniques as well as methods for characterization and validation of surface contamination. Each volume has a particular topical focus, covering the key techniques and recent developments in the area.Several novel wet and dry surface cleaning methods are addressed in this Volume. Many of these methods have not been reviewed previously, or the previous reviews are dated. These methods are finding increasing commercial application and the information in this book will be of high value to the reader. Edited by the leading experts in small-scale particle surface contamination, cleaning and cleaning control these books will be an invaluable reference for researchers and engineers in R&D, manufacturing, quality control and procurement specification situated in a multitude of industries such as: aerospace, automotive, biomedical, defense, energy, manufacturing, microelectronics, optics and xerography. - Provides a state-of-the-art survey and best-practice guidance for scientists and engineers engaged in surface cleaning or handling the consequences of surface contamination - Addresses the continuing trends of shrinking device size and contamination vulnerability in a range of industries, spearheaded by the semiconductor industry and others - Covers novel wet and dry surface cleaning methods of increasing commercial importance
Download or read book Developments in Surface Contamination and Cleaning Vol 6 written by Rajiv Kohli and published by William Andrew. This book was released on 2013-05-27 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this series Rajiv Kohli and Kash Mittal have brought together the work of experts from different industry sectors and backgrounds to provide a state-of-the-art survey and best-practice guidance for scientists and engineers engaged in surface cleaning or handling the consequences of surface contamination. The expert contributions in this volume cover important fundamental aspects of surface contamination that are key to understanding the behavior of specific types of contaminants. This understanding is essential to develop preventative and mitigation methods for contamination control. The coverage complements the treatment of surface contamination in vol.1, Fundamental and Applied Aspects. This volume covers: Sources and Generation of Particles; Manipulation Techniques for Particles on Surfaces; Particle Deposition and Rebound; Particle Behavior in Liquid Systems; Biological and Metallic Contamination; and includes a comprehensive list of current standards and resources. - Comprehensive coverage of innovations in surface contamination and cleaning - Written by established experts in the contamination and cleaning field - Each chapter is a comprehensive review of the state of the art - Case studies included
Download or read book Surface Contamination written by K. L. Mittal and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present volume and its companion Volume 2 document the proceedings of the Symposium on Surface Contamination: Its Genesis, Detection and Control held in Washington, D.C., September 10-13, 1978. This Symposium was a part of the 4th International Symposium on Contamination Control held under the auspices of the International Committee of Contamination Control Societies, and the Institute of Environmental Sciences (U.S.A.) was the official host. The ubiquitous nature of surface contamination causes concern to everyone dealing with surfaces, and the world of surfaces is wide and open-ended. The technological areas where surface clean ing is of cardinal importance are too many and very diversified. To people working in areas such as adhesion, composites, adsorp tion, friction, lubrication, soldering,device fabrication, printed circuit boards, etc., surface contamination has always been a bete noire. In short, people dealing with surfaces are afflicted with molysmophobiat, and rightfully so. In the past, the subject of surface contamination had been discussed in various meetings, but this symposium was hailed as the most comprehensive symposium ever held on this important topic, as the technical program comprised 70 papers by more than 100 authors from 10 countries. The symposium was truly international in scope and spirits and was very well attended. The attendees represented a broad spectrum of backgrounds, interests, and pro fessional affiliations, but all had a common interest and concern about surface contamination and cleaning.
Download or read book Developments in Surface Contamination and Cleaning Vol 2 written by Rajiv Kohli and published by William Andrew. This book was released on 2009-10-02 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rajiv Kohli and Kash Mittal have brought together the work of experts from different industry sectors and backgrounds to provide a state-of-the-art survey and best practice guidance for scientists and engineers engaged in surface cleaning or handling the consequences of surface contamination. Topics covered include: - A systems analysis approach to contamination control - Physical factors that influence the behavior of particle deposition in enclosures - An overview of current yield models and description of advanced models - Types of strippable coatings, their properties and applications of these coatings for removal of surface contaminants - In-depth coverage of ultrasonic cleaning - Contamination and cleaning issues at the nanoscale - Experimental results illustrating the impact of model parameters on the removal of particle contamination The expert contributions in this book provide a valuable source of information on the current status and recent developments in surface contamination and cleaning. The book will be of value to industry, government and academic personnel involved in research and development, manufacturing, process and quality control, and procurement specifications across sectors including microelectronics, aerospace, optics, xerography and joining (adhesive bonding). ABOUT THE EDITORS Rajiv Kohli is a leading expert with The Aerospace Corporation in contaminant particle behavior, surface cleaning, and contamination control. At the NASA Johnson Space Center in Houston, Texas, he provides technical support for contamination control related to ground-based and manned spaceflight hardware for the Space Shuttle, the International Space Station, and the new Constellation Program that is designed to meet the United States Vision for Space Exploration. Kashmiri Lal "Kash" Mittal was associated with IBM from 1972 to 1994. Currently, he is teaching and consulting in the areas of surface contamination and cleaning, and in adhesion science and technology. He is the Editor-in-Chief of the Journal of Adhesion Science and Technology and is the editor of 98 published books, many of them dealing with surface contamination and cleaning. Also available Developments in Surface Contamination and Cleaning, Volume 1: Fundamentals and Applied Aspects (edited by Rajiv Kohli & K.L. Mittal). ISBN: 9780815515555. · Provides guidance on best-practice cleaning techniques and the avoidance of surface contamination · Covers contamination and cleaning issues at the nanoscale · Includes an in-depth look at ultrasonic cleaning
Download or read book Cleanroom Technology written by William Whyte and published by John Wiley & Sons. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: A self-contained and practical book providing step-by-step guidance to the design and construction of cleanrooms, appropriate testing methodologies, and operation for the minimization of contamination… This second edition has been comprehensively revised and includes extensive updates to the two chapters that contain information on cleanroom standards and guidelines. The chapter on risk management has been extensively revised, especially the section on risk assessment. Other new subjects that have been added to the various chapters are those on clean-build, determination of air supply volumes for non-unidirectional airflow cleanrooms, RABS (Restricted Access Barrier Systems), contamination recovery test methods, entry of large items into a cleanroom, glove allergy problems, and how to develop a cleanroom cleaning programme. Used for in-house training and a textbook in colleges, this volume is for cleanroom personnel at all levels. It provides novices with an introduction to the state-of-the-art technology and professionals with an accessible reference to the current practices. It is particularly useful in the semiconductor, pharmaceutical, biotechnology and life sciences industries. William Whyte is an international authority in cleanrooms, with over 45 years experience in research, teaching and consulting in the electronic, healthcare and pharmaceutical industries. He is a member of British and International standards committees writing the International Cleanroom standards, and has received numerous awards for his work in Cleanroom Technology. A comment on the first edition: "...extremely useful and helpful...very well-written, highly organized, easy to understand and follow..." (Environmental Geology, 2003)
Download or read book Alternatives for Ground Water Cleanup written by National Research Council and published by National Academies Press. This book was released on 1994-02-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: There may be nearly 300,000 waste sites in the United States where ground water and soil are contaminated. Yet recent studies question whether existing technologies can restore contaminated ground water to drinking water standards, which is the goal for most sites and the result expected by the public. How can the nation balance public health, technological realities, and cost when addressing ground water cleanup? This new volume offers specific conclusions, outlines research needs, and recommends policies that are technologically sound while still protecting health and the environment. Authored by the top experts from industry and academia, this volume: Examines how the physical, chemical, and biological characteristics of the subsurface environment, as well as the properties of contaminants, complicate the cleanup task. Reviews the limitations of widely used conventional pump-and-treat cleanup systems, including detailed case studies. Evaluates a range of innovative cleanup technologies and the barriers to their full implementation. Presents specific recommendations for policies and practices in evaluating contamination sites, in choosing remediation technologies, and in setting appropriate cleanup goals.
