Download or read book Developments in Rapid Casting written by Graham Tromans and published by John Wiley & Sons. This book was released on 2004-01-16 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid Casting and its various techniques has fast become an indispensible part of modern manufacturing. Developments in rapid casting are the result of shorter lead-time demands just as increasingly shorter lead-time demands are the result of rapid casting. This cyclical relationship has meant that the exciting developments and evolution of rapid casting techniques is truly enduring. This important publication highlights the most up-to-date developments in rapid casting from academia and industry alike. Contributions from authoritative authors come together to form this comprehensive collection of discussions and case studies.
Download or read book Rapid Prototyping Manufacturing written by Paul Francis Jacobs and published by Society of Manufacturing Engineers. This book was released on 1992 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This turnkey technology source provides an introduction to rapid prototyping and manufacturing (RP&M) with emphasis on Stereolithography which represents the majority of all rapid prototyping systems currently in place. The content is based on theory, analysis and experiment with extensive test data, including select case studies from the automotive, simultaneous engineering, and medical sectors.
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer. This book was released on 2014-11-26 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in detail the various aspects of joining materials to form parts. A conceptual overview of rapid prototyping and layered manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Unusual and emerging applications such as micro-scale manufacturing, medical applications, aerospace, and rapid manufacturing are also discussed. This book provides a comprehensive overview of rapid prototyping technologies as well as support technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. This book also: Reflects recent developments and trends and adheres to the ASTM, SI, and other standards Includes chapters on automotive technology, aerospace technology and low-cost AM technologies Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered
Download or read book Evolution of Metal Casting Technologies written by Muhammad Azhar Ali Khan and published by Springer. This book was released on 2016-11-03 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of metal casting technologies starting from its historical evolution to casting design strategies that are being followed today in foundries and other metal casting industries. The details of most of the casting processes and their applications are also included for completeness. Foundry practices such as mold materials and molding techniques, pattern making and cores, furnaces, pouring, cleaning and heat treatment etc. are discussed in detail. Finally, current practices in casting design are demonstrated. Further developments in the field through computational methods and virtual reality are also described.
Download or read book Rapid Tooling written by Peter Hilton and published by CRC Press. This book was released on 2000-06-15 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: A discussion of the rapid tooling (RT) technologies under development and in use for the timely production of moulds and manufacturing tools. It describes applications within various leading companies and guides product and manufacturing process development groups on ways to reduce investments of money and time.
Download or read book Rapid Manufacturing written by Duc Pham and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rapid prototyping is an exciting new technology used to create physical models and functional prototypes directly from CAD models. Rapid tooling concerns the production of tooling using parts manufactured by rapid prototyping. The book describes the characteristics and capabilities of the main known rapid prototyping processes. It covers in detail various commercially available processes such as: Stereolithography (SLA), Selective Laser Sintering (SLS), and others. The text places a strong emphasis on practical applications and contains an abundance of photographs and diagrams to illustrate clearly the principles of the machines and processes involved.
Download or read book Rapid Casting Solutions written by Rupinder Singh and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters BCI (WoS).This special issue on rapid casting solutions comprises original research papers, review papers, technical papers and notes. It is devoted to the development of important topics in rapid casting technology, and has been published as a special issue in order to highlight selected papers submitted to important international conferences and symposia, plus invited papers from prominent researchers. Rapid prototyping has been around for some twenty years, and is widely used in diverse areas: from the building of aesthetic and functional prototypes to the production of tools and moulds for technological prototypes. Among the various rapid prototyping techniques, three-dimensional printing, polyjet printing, silicon moulding, etc., are used commercially as hybrid rapid casting solutions. This issue provides an overview of the rapid prototyping process for ceramic shells that can be constructed and then joined (as in the conventional process) to give a cavity for the pouring of metal to produce cost-effective prototypes for casting applications. This volume will be welcomed by academics, researchers, industrialists and university students specialising in rapid casting or rapid prototyping, production engineers and others.
Download or read book Rapid Prototyping Rapid Tooling and Reverse Engineering written by Kaushik Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2020-06-08 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the role of Rapid Prototyping Techniques within the product development phase. It deals with the concept, origin, and working cycle of Rapid Prototyping Processes with emphasis on the applications. Apart from elaboration of engineering and non-engineering applications, it highlights recent applications like Bio-Medical Models for Surgical Planning, Molecular Models, Architectural Models, Sculptured Models, Psycho-Analysis Models. Special emphasis has been provided to the technique of generating human organs from live cells/tissues of the same human named 3D BIO PRINTERS. As the Rapid Prototyping Techniques are for tailor made products and not for mass manufacturing hence the book also elaborates on the mass manufacturing of rapid prototyped products. This includes casting and rapid tooling. The book concludes with Reverse Engineering and the role played by Rapid Prototyping Techniques towards the same. With globalization of market and advances in science and technology, the life span of products has shortened considerably. For early realization of products and short development period, engineers and researchers are constantly working together for more and more efficient and effective solutions. The most effective solution identified has been usage of computers in both designing and manufacturing. This gave birth to the nomenclatures CAD (Computer Aided Designing) and CAM (Computer aided Manufacturing). This was the initiation that ensured short product development and realization period. Researchers coined the concept as Rapid Prototyping. In contrast to Prototyping, Rapid prototyping is a group of techniques used to quickly fabricate a scale model of a physical part or assembly using three-dimensional computer aided design (CAD) data. Construction of the part or assembly is usually done using 3D printing or "additive or subtractive layer manufacturing" technology. The first methods for rapid prototyping became available in the late 1980s and were used to produce models and prototype parts. Today, they are used for a wide range of applications and are used to manufacture production-quality parts in relatively small numbers if desired without the typical unfavorable short-run economics. This economy has encouraged online service bureaus for early product realization or physical products for actual testing. This book is expected to contain Seven Chapters. Chapter 1 would explain product life cycle and the product development phase in the same, introducing role of Rapid Prototyping Techniques in Product development phase. Chapter 2 would deals with the concept, origin and working cycle of Rapid Prototyping Processes. Chapter 3 would concentrates on the applications of Rapid Prototyping Technology. Apart from elaboration of engineering and non-engineering applications, it also elaborates on recent applications like Bio-Medical Models for Surgical Planning, Molecular Models, Architectural Models, Sculptured Models, Psycho-Analysis Models etc. Chapter 4 would introduce the various Rapid Prototyping systems available worldwide. The chapter also introduces the technique of generating human organs from live cells/tissues of the same human named 3D BIO PRINTERS hence ensuring low rejection rate by human body. As the Rapid Prototyping Techniques are for tailor made products and not for mass manufacturing hence Chapter 5 would elaborates on the mass manufacturing of rapid prototyped products. This includes Casting and Rapid Tooling. Chapter 6 would deal with Reverse Engineering and the role played by Rapid Prototyping Techniques towards the same. As the product realization is primarily dependent on various softwares which are required to be understood for better accuracy so the concluding chapter of the book i.e. Chapter 7 would explain some software associated with the various techniques.
Download or read book Advances in Mechanical Materials and Manufacturing Engineering written by Amir Khalid and published by Trans Tech Publications Ltd. This book was released on 2014-10-31 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collection of selected, peer reviewed papers from the 5th International Conference on Mechanical and Manufacturing Engineering 2014 (ICME 2014), October 29-30, 2014, Bandung, Indonesia. The 201 papers are grouped as follows: Chapter 1: Materials Science, Technologies of Production and Materials Processing, Chapter 2: Alternative Fuel and Engines, Chapter 3: Aeronautical Systems and Technology, Chapter 4: Acoustics and Vibration, Chapter 5: Fatigue and Fracture Mechanics, Chapter 6: Fluid Mechanics and Heat Transfer in Engineering Practice, Chapter 7: Researching and Designing of Parts and Assemblies of Machines and Mechanisms, Chapter 8: Mechatronics and Industrial Automation, Chapter 9: Biomechanics and Biomedical Engineering, Chapter 10: Industrial Engineering and Production Management
Download or read book Frontiers of Manufacturing and Design Science II written by Dong Ye Sun and published by Trans Tech Publications Ltd. This book was released on 2011-10-24 with total page 5440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This collection of 949 peer-reviewed papers on the Frontiers of Manufacturing and Design Science is intended to promote the development of Manufacturing, Design and Materials Science, the strengthening of international academic cooperation and communications and the exchange of research ideas. This book provides readers with a broad overview of the latest advances in the field of Manufacturing and Design Science.
Download or read book Rapid Prototyping Casebook written by Julia A McDonald and published by John Wiley & Sons. This book was released on 2001-06-22 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Time compression technologies such as rapid prototyping and manufacturing offer enormous potential benefits. Where time can be saved in the development of new or modified products, expenditure can also be reduced. Swifter development can also give a competitive edge to those using these techniques. However there are a number of different systems and processes that can be used. Ensuring that the most appropriate rapid prototyping and manufacturing technology is applied to a problem is vital to the success of a project. The case studies, compiled by the experienced team of the Warwick Manufacturing Group at the University of Warwick in the UK, represent a range of different real experiences drawn from a variety of industries, using a range of materials and processes. CONTENTS INCLUDE: Overview of product design and development Computer-aided design and rapid prototyping The introduction of CAD/CAM in the ceramics industry Product design and development – reverse engineering Reducing the risk of new product development by utilizing rapid prototyping technologies Stress analysis using rapid prototyping techniques Case studies in rapid prototyping and manufacturing techniques–flow visualization using rapid prototype models Overview of utilizing bureau facilities Using bureau services Running an internal rapid prototyping bureau Overview of rapid casting techniques An alternative route to metal components for prototype and low-volume production Rapid prototyping in pattern making and foundry applications Rapid prototyping – enhancing product development at Parker Hannifin Cast tooling with rapid prototype patterns Overview of rapid tooling The role of rapid immediate production tooling (IPT) in new product development Rapid tooling – cast resin and sprayed metal tooling.
Download or read book Materials Processing written by Lorraine F. Francis and published by Academic Press. This book was released on 2015-12-28 with total page 615 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials Processing is the first textbook to bring the fundamental concepts of materials processing together in a unified approach that highlights the overlap in scientific and engineering principles. It teaches students the key principles involved in the processing of engineering materials, specifically metals, ceramics and polymers, from starting or raw materials through to the final functional forms. Its self-contained approach is based on the state of matter most central to the shaping of the material: melt, solid, powder, dispersion and solution, and vapor. With this approach, students learn processing fundamentals and appreciate the similarities and differences between the materials classes. The book uses a consistent nomenclature that allow for easier comparisons between various materials and processes. Emphasis is on fundamental principles that gives students a strong foundation for understanding processing and manufacturing methods. Development of connections between processing and structure builds on students’ existing knowledge of structure-property relationships. Examples of both standard and newer additive manufacturing methods throughout provide students with an overview of the methods that they will likely encounter in their careers. This book is intended primarily for upper-level undergraduates and beginning graduate students in Materials Science and Engineering who are already schooled in the structure and properties of metals, ceramics and polymers, and are ready to apply their knowledge to materials processing. It will also appeal to students from other engineering disciplines who have completed an introductory materials science and engineering course. Coverage of metal, ceramic and polymer processing in a single text provides a self-contained approach and consistent nomenclature that allow for easier comparisons between various materials and processes Emphasis on fundamental principles gives students a strong foundation for understanding processing and manufacturing methods Development of connections between processing and structure builds on students’ existing knowledge of structure - property relationships Examples of both standard and newer additive manufacturing methods throughout provide students with an overview of the methods that they will likely encounter in their careers
Download or read book Additive Manufacturing Technologies written by Ian Gibson and published by Springer Nature. This book was released on 2020-11-10 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers in detail digitally-driven methods for adding materials together to form parts. A conceptual overview of additive manufacturing is given, beginning with the fundamentals so that readers can get up to speed quickly. Well-established and emerging applications such as rapid prototyping, micro-scale manufacturing, medical applications, aerospace manufacturing, rapid tooling and direct digital manufacturing are also discussed. This book provides a comprehensive overview of additive manufacturing technologies as well as relevant supporting technologies such as software systems, vacuum casting, investment casting, plating, infiltration and other systems. Reflects recent developments and trends and adheres to the ASTM, SI and other standards; Includes chapters on topics that span the entire AM value chain, including process selection, software, post-processing, industrial drivers for AM, and more; Provides a broad range of technical questions to ensure comprehensive understanding of the concepts covered.
Download or read book Science and Technology of Casting Processes written by Malur Srinivasan and published by BoD – Books on Demand. This book was released on 2012-09-26 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with various science and technology factors that need careful consideration in producing a casting. It consists of 11 chapters contributed by experts in their respective fields. The topics include simulation of continuous casting process, control of solidification of continuous castings, influence of mold flux in continuous casting, segregation in strip casting of steel, developments in shell and solid investment mold processes, innovative pressure control during filling of sand molds, fracture toughness specifically of castings, permanent molding of cast iron, wear resistant castings and improvement of accuracy in estimating graphite nodularity in ductile iron castings.
Download or read book User s Guide to Rapid Prototyping written by Todd Grimm and published by Society of Manufacturing Engineers. This book was released on 2004 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: User's Guide to Rapid Prototyping will help designers, engineers, executive management, and others in the company understand how to apply rapid prototyping technologies such as 3D printing, stereo-lithography, selective laser sintering, and fused deposition modeling to the product development process. Intertwined with rapid prototyping, the processes of rapid tooling and rapid manufacturing are also discussed. An aid to making informed business decisions, the book provides information about when it may be right to implement rapid prototyping in-house versus going to a service provider. The path through justification, evaluation, and implementation is outlined. Readers will gain insights into the benefits, risks, and limitations of each technology.
Download or read book 3D Printing in Biomedical Engineering written by Sunpreet Singh and published by Springer Nature. This book was released on 2020-07-16 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a comprehensive overview of the rapidly evolving field of three-dimensional (3D) printing, and its increasing applications in the biomedical domain. 3D printing has distinct advantages like improved quality, cost-effectiveness, and higher efficiency compared to traditional manufacturing processes. Besides these advantages, current challenges and opportunities regarding choice of material, design, and efficiency are addressed in the book. Individual chapters also focus on select areas of applications such as surgical guides, tissue regeneration, artificial scaffolds and implants, and drug delivery and release. This book will be a valuable source of information for researchers and professionals interested in the expanding biomedical applications of 3D printing.
Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. Includes a critical review of the current key fundamental and technical issues of Ti PM. Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
