Download or read book Developments in Plastics Technology 1 written by A. Whelan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the field of plastics technology, the process of extrusion is widespread and important. It is employed in the compounding and pelletising of plastics materials, in their conversion into products (such as profiles, pipe, hose, sheet, film or bottles) and in the coating of wires, cables, paper, board or foil. A major reason for its use is the screw extruder's ability to melt efficiently and pump continuously large amounts of plastics materials. The understanding of the melting/pumping operation of the extruder and the development of larger and faster-running machines so as to give higher outputs have been given great attention and the results have been widely published. However, the whole manufacturing technology for extruded products has also developed, particularly in recent years. This has occurred not only by the use of modern screw extruders, but also by the incorporation of improved process control systems, the better design of dies and extrudate handling machinery and by the utilisation of improved plastics materials and additives. It is the purpose of this book to present selected topics which contribute to, or exemplify, these developments in extrusion-based processes.
Download or read book Plastics Technology written by Christian Bonten and published by . This book was released on 2019-10-07 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory book covers the entire spectrum of plastics technology / engineering, from raw materials to finished plastic products. It is not just for university / college students in plastics technology and other engineering disciplines but also for beginners to the field in general. The interconnectivity between the different relevant knowledge areas of plastics technology, such as materials engineering, processing technology, and product development, is emphasized. A chapter "Plastics and the Environment" is also included, covering a topic (rightly) often of great concern to students and newcomers to the field. So includes numerous videos, conveniently linked via QR codes, to better demonstrate key processes visually.
Download or read book Plastics Technology Handbook Fourth Edition written by Manas Chanda and published by CRC Press. This book was released on 2006-12-19 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because the field of plastics is one of the fastest changing areas today, the need arises to offer relevant, comprehensive material on polymers. An established source of information on modern plastics, the Plastics Technology Handbook continues to provide up-to-date coverage on the properties, processing methods, and applications of polymers. Retaining the easy-to-follow structure of the previous editions, this fourth edition includes new topics of interest that reflect recent developments and lead to better insights into the molecular behavior of polymers. New to the Fourth Edition Advances in supramolecular polymerization, flame retardancy, polymer-based nanomedicines, and drug delivery The new concept of oxo-biodegradable polymers Broadened discussion on plastic foams and foam extrusion processes More information on the processing and applications of industrial polymers, including the emerging field of nanoblends Developments in polymer synthesis and applications, such as polymeric sensors, hydrogels and smart polymers, hyperbranched polymers, shape memory polymers, polymeric optical fibers, scavenger resins, polymer nanocomposites, polymerization-filled composites, and wood-polymer composites A state-of-the-art account of the various available methods for plastics recycling Advances in the use of polymers in packaging, construction, the automotive and aerospace industries, agriculture, electronics and electrical technology, biomedical applications, corrosion prevention, and sports and marine applications Plastics Technology Handbook, Fourth Edition thoroughly covers traditional industrial polymers and their processing methods as well as contemporary polymeric materials, recent trends, and the latest applications.
Download or read book Recent Developments in Plastic Recycling written by Jyotishkumar Parameswaranpillai and published by Springer Nature. This book was released on 2021-10-01 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a systematic and comprehensive account of the recent developments in the recycling of plastic waste material. It presents state-of-the-art procedures for recycling of plastics from different sources and various characterization methods adopted in analyzing their properties. In addition, it looks into properties, processing, and applications of recycled plastic products as one of the drivers for sustainable recycling plastics especially in developing countries. This book proves a useful reference source for both engineers and researchers working in composite materials science as well as the students attending materials science, physics, chemistry, and engineering courses.
Download or read book Developments in Plastics Technology 3 written by A. Whelan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the sheer size of the plastics industry, the title Developments in Plastics Technology now covers an incredibly wide range of subjects or topics. No single volume can survey the whole field in any depth and so what follows is therefore a series of chapters on selected topics. The topics were selected by us, the editors, because of their immediate relevance to the plastics industry. When one considers the materials produced and used by the modern plastics industry, there is a tendency to think of the commodity thermoplastics (such as poly(vinyl chloride) or polyethylene); the thermosetting materials are largely ignored. Because of this attitude we are very pleased to include in this volume a chapter which deals with the processing of a thermosetting material, i.e. the pultrusion of glass reinforced polyester. The extrusion of plastics is, of course, a very important subject but an aspect which is often overlooked is the need to remove volatile matter during processing: for this reason we have included a chapter on devolatilisation. Current industrial practice is towards materials modification and this attitude is reflected in the chapters on the transformation of ethylene vinyl acetate polymers and the use of wollastonite in two important thermoplastics. When assessing the performance of materials, there is a tendency to concentrate on short-term mechanical tests and ignore such topics as fatigue and longer-term testing. We are therefore very pleased to include a chapter on this subject.
Download or read book Global Plastics Outlook Economic Drivers Environmental Impacts and Policy Options written by OECD and published by OECD Publishing. This book was released on 2022-02-22 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: While plastics are extremely useful materials for modern society, plastics production and waste generation continue to increase with worsening environmental impacts despite international, national and local policy responses, as well as industry commitments. The first of two reports, this Outlook intends to inform and support policy efforts to combat plastic leakage.
Download or read book Feedstock Recycling of Plastic Wastes written by Jose Aguado and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of plastic materials has seen a massive increase in recent years, and generation of plastic wastes has grown proportionately. Recycling of these wastes to reduce landfill disposal is problematic due to the wide variation in properties and chemical composition among the different types of plastics. Feedstock recycling is one of the alternatives available for consideration, and Feedstock Recycling of Plastic Wastes looks at the conversion of plastic wastes into valuable chemicals useful as fuels or raw materials. Looking at both scientific and technical aspects of the recycling developments, this book describes the alternatives available. Areas include chemical depolymerization, thermal processes, oxidation and hydrogenation. Besides conventional treatments, new technological approaches for the degradation of plastics, such as conversion under supercritical conditions and coprocessing with coal are discussed. This book is essential reading for those involved in plastic recycling, whether from an academic or industrial perspective. Consultants and government agencies will also find it immensely useful.
Download or read book Developments in plastics technology written by A. Whelan and published by . This book was released on with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developments in Plastics Technology 4 written by A. Whelan and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the sheer size and scope of the plastics industry, the title Developments in Plastics Technology now covers an incredibly wide range of subjects or topics. No single volume can survey the whole field in any depth and what follows is, therefore, a series of chapters on selected topics. The topics were selected by us, the editors, because of their immediate relevance to the plastics industry. When one considers the advancements of the plastics processing machinery (in terms of its speed of operation and conciseness of control), it was felt that several chapters should be included which related to the types of control systems used and the correct usage of hydraulics. The importance of using cellular, rubber-modified and engineering-type plastics has had a major impact on the plastics industry and therefore a chapter on each of these subjects has been included. The two remaining chapters are on the characterisation and behaviour of polymer structures, both subjects again being of current academic or industrial interest. Each of the contributions was written by a specialist in that field and to them all, we, the editors, extend our heartfelt thanks, as writing a contribution for a book such as this, while doing a full-time job, is no easy task.
Download or read book Improving Markets for Recycled Plastics Trends Prospects and Policy Responses written by OECD and published by OECD Publishing. This book was released on 2018-05-24 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become one of the most prolific materials on the planet: in 2015 we produced about 380 million tonnes of plastics globally, up from 2 million tonnes in the 1950s. Yet today only 15% of this plastic waste is collected and recycled into secondary plastics globally each year. This ...
Download or read book Plastic written by Susan Freinkel and published by HMH. This book was released on 2011-04-18 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: “This eloquent, elegant book thoughtfully plumbs the . . . consequences of our dependence on plastics” (The Boston Globe, A Best Nonfiction Book of 2011). From pacemakers to disposable bags, plastic built the modern world. But a century into our love affair, we’re starting to realize it’s not such a healthy relationship. As journalist Susan Freinkel points out in this eye-opening book, we’re at a crisis point. Plastics draw on dwindling fossil fuels, leach harmful chemicals, litter landscapes, and destroy marine life. We’re drowning in the stuff, and we need to start making some hard choices. Freinkel tells her story through eight familiar plastic objects: a comb, a chair, a Frisbee, an IV bag, a disposable lighter, a grocery bag, a soda bottle, and a credit card. With a blend of lively anecdotes and analysis, she sifts through scientific studies and economic data, reporting from China and across the United States to assess the real impact of plastic on our lives. Her conclusion is severe, but not without hope. Plastic points the way toward a new creative partnership with the material we love, hate, and can’t seem to live without. “When you write about something so ubiquitous as plastic, you must be prepared to write in several modes, and Freinkel rises to this task. . . . She manages to render the most dull chemical reaction into vigorous, breathless sentences.” —SF Gate “Freinkel’s smart, well-written analysis of this love-hate relationship is likely to make plastic lovers take pause, plastic haters reluctantly realize its value, and all of us understand the importance of individual action, political will, and technological innovation in weaning us off our addiction to synthetics.” —Publishers Weekly “A compulsively interesting story. Buy it (with cash).” —Bill McKibben, author of The End of Nature “What a great read—rigorous, smart, inspiring, and as seductive as plastic itself.” —Karim Rashid, designer
Download or read book Plastics technology written by and published by . This book was released on 1979 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastics Technology Handbook written by Don Rosato and published by Momentum Press. This book was released on 2010-10-22 with total page 1456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook provides a simplified, practical and innovative approach to understanding the design and manufacture of plastic products. It will expand the reader's understanding of plastics technology by defining and focusing on past, current, and future technical trends. Published in 2 volumes, the content is presented so that both technical and non-technical readers can understand the interrelationships of materials to processes. Different plastic products are examined and their related critical factors are shown, from meeting performance requirements in different environments, to reducing costs and targeting for zero defects. Examples used include small to large, and simple to complex shapes. Information is included on static properties (tensile, flexural), dynamic properties (creep, fatigue, impact) and physical and chemical properties. Extensive reference sources and useful data and physical and chemical constants are also provided. Volume 1 sets out the basic principles of polymers, what they are and how plastics are formulated, processed, and manufactured.
Download or read book Plastics and the Environment written by R. M. Harrison and published by Royal Society of Chemistry. This book was released on 2018-11-20 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic has become a ubiquitous part of modern life. A cheap, lightweight material, it is used in everything from food packaging to consumer electronics and microbeads in cosmetic products. However, we are becoming increasingly aware of the problems our reliance on plastic is causing in the environment. For example, recent campaigns have highlighted the build-up of microbeads in the marine environment and the damage this is doing to wildlife, and the problem of marine litter, often in very remote locations. There are also concerns over exposure to plasticisers and their possible consequences for health. The plastics industry is under increasing pressure, not only from the government and environmental groups, but also from consumers, to improve the environmental impact of their products. This book presents an introduction to the uses of plastics and an overview of how they interact with the environment. It is a valuable resource for students studying environmental science as well as researchers working in the plastics industry, and policy makers and regulators concerned with waste disposal and environmental planning and conservation.
Download or read book Developments in Plastics Technology 4 written by A. Whelan and published by Springer. This book was released on 1989 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because of the sheer size and scope of the plastics industry, the title Developments in Plastics Technology now covers an incredibly wide range of subjects or topics. No single volume can survey the whole field in any depth and what follows is, therefore, a series of chapters on selected topics. The topics were selected by us, the editors, because of their immediate relevance to the plastics industry. When one considers the advancements of the plastics processing machinery (in terms of its speed of operation and conciseness of control), it was felt that several chapters should be included which related to the types of control systems used and the correct usage of hydraulics. The importance of using cellular, rubber-modified and engineering-type plastics has had a major impact on the plastics industry and therefore a chapter on each of these subjects has been included. The two remaining chapters are on the characterisation and behaviour of polymer structures, both subjects again being of current academic or industrial interest. Each of the contributions was written by a specialist in that field and to them all, we, the editors, extend our heartfelt thanks, as writing a contribution for a book such as this, while doing a full-time job, is no easy task.
Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues
Download or read book Plastics Industry 4 0 written by Christian Hopmann and published by . This book was released on 2021-01-05 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a sophisticated insight into the development of the plastics industry in terms of digitalization and Industry 4.0. The background to these increasingly more important topics is discussed along with the prerequisite knowledge regarding process complexity and data acquisition to build the foundation of data driven digital processes. Furthermore, the facets of so-called cyber physical systems including their key components are discussed and illustrated using industrial application as well as scientific use cases.
