Download or read book Development of Thulium Fiber Lasers for High Average Power and High Peak Power Operation written by Robert Andrew Sims and published by . This book was released on 2013 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis focuses on the development of a laser system utilizing chirped pulse amplification (CPA) to achieve record level energies and peak powers for ultrashort pulses in Tm-doped fiber. A mode-locked oscillator was built to generate femtosecond pulses operating with pJ energy. Pulses generated in the mode-locked oscillator were limited to low energies and contained spectral modulation due to the mode-locking mechanism, therefore, a Raman-soliton self-frequency shift (Raman-SSFS) amplifier was built to amplify pulses, decrease the pulse duration, and spectrally clean pulses. These pulses were amplified using chirped pulse amplification (CPA) in which, limiting factors for amplification were examined and a high peak power system was built. The primary limiting factors of CPA in fibers include the nonlinear phase accumulation, primarily through self-phase modulation (SPM), and gain narrowing. Gain narrowing was examined by temporally stretching pulses in a highly nonlinear fiber that both stretched the pulse duration and broadened the spectrum. A high peak power CPA system amplified pulses to 1 [microjoule] energy with 300 fs compressed pulses, corresponding to a peak power [greater than]3 MW. High peak power pulses were coupled into highly nonlinear fibers to generate supercontinuum.
Download or read book Fiber Lasers written by Liang Dong and published by CRC Press. This book was released on 2016-09-19 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fiber laser, with its humble beginning in the late 1980s, has undergone tremendous development in the past decade or so, transforming itself from a research curiosity to a major force in modern manufacturing. Today, it is revolutionizing our economy by fundamentally changing the way we mark, machine, and process materials on an industrial scale. The recent development of high-power fiber lasers is also fundamentally shaping a wide range of other areas from physical sciences and medicine to geology and space exploration. In the past few years, the tactical deployment of direct energy weapons based on fiber lasers has become a reality. The development of fiber lasers is rooted in a number of technical areas including optical materials, optical waveguide design, nonlinear optics, optical fiber fabrication, and optical characterization, in addition to optical fiber components, and fiber laser design and architecture. No comprehensive in-depth coverage of such diverse topical areas has appeared in a single book. Many important developments have taken place in the past decade in both academia and industry. This book comprehensively covers the basics, technology and applications of fiber lasers including up-to-date developments in both academia and industry and is aimed to serve as both an introduction and research aid for graduate students, engineers, and scientists who are new to this field and also for veterans in the field
Download or read book High Power Ytterbium and Thulium Fiber Lasers written by Justin S. Cook and published by . This book was released on 2021 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: High power fiber lasers have revolutionized many areas of both basic research and industry with their high power, high brightness output and capability for a compact, monolithic design. These systems are often run in multimode operation with few constraints on output. However, for many directed energy applications, such as spectral beam combining, the necessary laser parameters are far more stringent, requiring systems with state-of-the-art characteristics, such as single transverse mode operation, narrow linewidth and multi-kW output powers. Currently, further growth in output power of fiber laser systems at 1 and 2 [micrometer] is hindered by various nonlinear and thermal limitations within the fiber gain medium. Specifically, 1 [micrometer] systems are primarily hindered by transverse mode instability, while 2 [micrometer] lasers at high average powers often encounter an effect known as modulation instability. This dissertation explores the power scaling potential of both Yb-doped and Tm-doped fiber lasers along with related applications. Power scaling of two different Yb:fiber amplifiers is examined, where first, a novel confined-doping fiber geometry is used to generate 450 W single mode output, and second, through a demonstration of a Yb:fiber amplifier with > 2200 W output power and quasi-single mode beam quality. At 2 [micrometer], a new pumping architecture known as in-band pumping is utilized in an effort to take Tm-doped fiber amplifiers first to the multi-100 W level and then into the multi-kW regime. An in-band pumped laser is developed and characterized with over 75 W output power and > 80% slope efficiency. The last laser system constructed is a tunable, narrow linewidth Tm-doped fiber laser used to systematically induce and study the effects of thermal blooming. Results obtained from scanning the wavelength across individual atmospheric absorption resonances are presented, along with time-resolved data obtained at a fixed wavelength. Finally, two candidate fiber designs are presented for power scaling of in-band pumping at 2 [micrometer] to the multi-kW power level. Numerical studies detail the performance of these two fiber designs at high average powers and their ability to suppress the onset of modulation instability. Taken together, the results discussed in this dissertation further the science of fiber lasers for directed energy applications.
Download or read book Advances in High Power Fiber and Diode Laser Engineering written by Ivan Divliansky and published by Institution of Engineering and Technology. This book was released on 2019-12-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in High-Power Fiber and Diode Laser Engineering provides an overview of recent research trends in fiber and diode lasers and laser systems engineering. In recent years, many new fiber designs and fiber laser system strategies have emerged, targeting the mitigation of different problems which occur when standard optical fibers are used for making high-power lasers. Simultaneously, a lot of attention has been put to increasing the brightness and the output power of laser diodes. Both of these major laser development directions continue to advance at a rapid pace with the sole purpose of achieving higher power while having excellent beam quality. The book begins by introducing the principles of diode lasers and methods for improving their brightness. Later chapters cover quantum cascade lasers, diode pumped high power lasers, high average power LMA fiber amplifiers, high-power fiber lasers, beam combinable kilowatt all-fiber amplifiers, and applications of 2 μm thulium fiber lasers and high-power GHz linewidth diode lasers. Written by a team of authors with experience in academia and industrial research and development, and brought together by an expert editor, this book will be of use to anyone interested in laser systems development at the laboratory or commercial scale.
Download or read book Fundamentals of Fiber Lasers and Fiber Amplifiers written by Vartan V. Ter-Mikirtychev and published by Springer Nature. This book was released on 2019-12-30 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamental aspects of fiber lasers and fiber amplifiers, and includes a wide range of material from laser physics fundamentals to state-of-the-art topics in this rapidly growing field of quantum electronics. This expanded and updated new edition includes substantial new material on nonlinear frequency conversion and Raman fiber lasers and amplifiers, as well as an expanded list of references inclusive of the recent literature in the field. Emphasis is placed on the nonlinear processes taking place in fiber lasers and amplifiers, their similarities, differences to, and their advantages over other solid-state lasers. The reader will learn the basic principles of solid-state physics and optical spectroscopy of laser active centers in fibers, the main operational laser regimes, and will receive practical recommendations and suggestions on fiber laser research, laser applications, and laser product development. The book will be useful for students, researchers, and professional physicists and engineers who work with lasers in the optical and telecommunications field, as well as those in the chemical and biological industries.
Download or read book Peak Power Scaling of Nanosecond Pulses in Thulium Based Fiber Lasers written by Christian Gaida and published by . This book was released on 2013 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thulium based fiber lasers represent a promising alternative for pulse energy scaling and high peak power generation with ytterbium based systems at 1 [micrometer]. Advantages of thulium arise from the operation at longer wavelengths and a large gain bandwidth (1.8-2.1 [micrometer]). Nonlinear effects, such as self phase modulation, stimulated Raman scattering and stimulated Brillouin scattering generally limit peak power scaling in fiber lasers. The longer wavelength of thulium fiber lasers and large mode field areas can significantly increase the nonlinear thresholds. Compared to 1 [micrometer] systems, thulium fiber lasers enable single mode guidance for two times larger mode field diameter in step index fibers. Similar behavior is expected for index guiding thulium doped photonic crystal fibers. In this work a novel thulium doped rod type photonic crystal fiber design with large mode field diameter ([greater than] 50 [micrometer]) was first characterized in CW-lasing configuration and then utilized as final amplifier in a two stage master oscillator power amplifier. The system generated MW-level peak power at 6.5ns pulse duration and 1kHz repetition rate. This world record performance exemplifies the potential of thulium fiber lasers to supersede ytterbium based systems for very high peak power generation in the future. As part of this work a computer model for the transient simulation of pulsed amplification in thulium based fiber lasers was developed. The simulations are in good agreement with the experimental results. The computer model can be used for efficient optimization of future thulium based fiber amplifier designs.
Download or read book Single Frequency Fiber Lasers written by Zhongmin Yang and published by Springer. This book was released on 2019-02-19 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a contemporary overview of the technologies of single-frequency fiber lasers. The development of single-frequency fiber lasers is one of the most significant achievements in the field of laser photonics over the past two decades. Owing to the crucial demands of a laser sources with highly stable single-frequency operation, narrow linewidth, low noise, scalable to high output power, compact and robustness structure, fiber lasers have been intensively studied since its introduction to the single-frequency laser community and they still continuously proceed to trigger the emergence of new technologies and applications. This book systematically demonstrates the single-frequency fiber laser technologies from fundamental principles to state-of-the-art progress. Details of selected typical applications of single-frequency fiber lasers are also given and discussed. The reader will acquire a good knowledge of the current situation within this important field.
Download or read book Power Scaling of Large Mode Area Thulium Fiber Lasers in Various Spectral and Temporal Regimes written by Timothy S. McComb and published by . This book was released on 2009 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: High power thulium fiber lasers are interesting for a myriad of applications due to their potential for high average output power, excellent beam quality, compactness, portability, high operating efficiency and broad, eye-safe spectral range from 1.8-2.1 microns. Currently, the majority of thulium laser research effort is being invested into scaling average output powers; however, such output powers are being scaled with no degree of control on laser system output spectrum or temporal behavior. Thulium fiber laser technology is not useful for many of its most important applications without implementation of techniques enabling tunable, narrow spectral widths with appropriate pulse durations for particular applications. This work outlines several techniques for spectral control of thulium fiber lasers and investigates scaling of average laser powers while using these techniques to maintain a desired spectral output. In addition, an examination of operation in both nanosecond and picosecond pulsed regimes and scaling of average powers and pulse energies in these regimes to useful power levels is conducted. The demonstration of thulium fiber laser systems for applications in frequency conversion and spectral beam combination is also discussed. In addition to the experimental results, theoretical modeling of thulium fiber amplifier operation, simple thermal management analysis, as well as practical fiber and system design considerations for future power scaling are presented. Experimental and theoretical results of this work will enable the successful design of future extremely high power spectrally and temporally controlled thulium fiber laser systems.
Download or read book High Power Laser Handbook written by Hagop Injeyan and published by McGraw Hill Professional. This book was released on 2011-01-05 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The State of the Art in High-Power Laser Technology Filled with full-color images, High-Power Laser Handbook offers comprehensive details on the latest advances in high-power laser development and applications. Performance parameters for each major class of lasers are described. The book covers high-power gas, chemical, and free-electron lasers and then discusses semiconductor diode lasers, along with the associated technologies of packaging, reliability, and beam shaping and delivery. Current research and development in solid-state lasers is described as well as scaling approaches for high CW powers, high pulse energies, and high peak powers. This authoritative work also addresses the emergence of fiber lasers and concludes by reviewing various methods for beam combining. Coverage Includes: Carbon dioxide lasers Excimer lasers Chemical lasers High-power free-electron lasers Semiconductor laser diodes High-power diode laser arrays Introduction to high-power solid-state lasers Zig-zag slab lasers ThinZag high-power laser development Thin disk lasers Heat capacity lasers Ultrafast solid-state lasers Ultrafast lasers in the thin disk geometry The National Ignition Facility laser Optical fiber lasers Pulsed fiber lasers High-power ultrafast fiber laser systems High-power fiber lasers for industry and defense Beam combining
Download or read book Development of a High peak and Average power Flexible Photonic Crystal Fiber Laser written by Avry Shirakov and published by . This book was released on 2014 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser plasma Acceleration Proceedings of the International School of Physics Enrico Fermi Varenna on Lake Como Villa Monastero 20 25 June 2011 written by Fernando Ferroni and published by IOS Press. This book was released on 2012 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: Impressive progress has been made in the field of laser-plasma acceleration in the last decade, with outstanding achievements from both experimental and theoretical viewpoints. Closely exploiting the development of ultra-intense, ultrashort pulse lasers, laser-plasma acceleration has developed rapidly, achieving accelerating gradients of the order of tens of GeV/m, and making the prospect of miniature accelerators a more realistic possibility.This book presents the lectures delivered at the Enrico Fermi International School of Physics and summer school: 'Laser-Plasma Acceleration', held in Varenna, Italy, in June 2011.
Download or read book Fiber Lasers written by Oleg G. Okhotnikov and published by John Wiley & Sons. This book was released on 2012-06-26 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive account of the latest developments and applications in this rapidly developing field, covering a wide range of topics, such as power scaling and short pulse generation, dispersion management and modeling, broadband supercontinuum generation and wavelength tailoring. The book brings together contributions from the world's leading experts at major collaborative research centers throughout Europe, Australia, Russia and the USA. Each chapter presents a tutorial style introduction to the selected topic suitable for scientists, researchers and experts, as well as graduate and postgraduate students with a basic background in optics.
Download or read book Fiber Laser written by Mukul Paul and published by BoD – Books on Demand. This book was released on 2016-03-02 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a self-contained collection of scholarly papers targeting an audience of practicing researchers, academics, PhD students, and other scientists. This book describes the rapidly developing field of fiber laser technology filling the very important role of providing students, researchers, and technology managers with valuable, timely, and unbiased information on the subject. The objective of this book is to highlight recent progress and trends in fiber laser technology covering a wide range of topics, such as self-pulsing phenomena in high-power continuous wave (CW) Yb-doped fiber lasers, Q-switched fiber laser, mode-locked fiber laser using carbon nanotubes (CNT), properties of double-scale pulses in mode-locked fiber laser, Brillouin fiber laser, dual-wave length fiber laser (DWFL) for microwave (MHz) and terahertz (THz) radiation generation, tunable fiber laser based on twin core optical fiber, reflective semiconductor optical amplifier (RSOA)-based fiber laser, dissipative soliton phenomena in fiber lasers, noiselike pulses (NLPs) in Yb-doped fiber laser, ultra fast fiber laser, numerical simulation in Q-switched and mode-locked fiber laser, gain saturation in optical fiber laser amplifiers, heat generation and removal in fiber lasers, and different fiber laser based technologies for material processing. We hope that this book will be useful for students, researchers, and professionals, who work with fiber lasers. This book will also serve as an interesting and valuable reference that will impact, stimulate, and promote further advances in the area of fiber lasers
Download or read book High Power Laser Systems written by Masoud Harooni and published by BoD – Books on Demand. This book was released on 2018-10-03 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser is one of the most applicable sources of energy and it can be used in a large variety of applications such as defense, industries and medicine. The special characteristics of this source of energy make it very interesting for different applications. This book includes an interesting and recent collection of relevant research on the development of high-powered laser systems. It includes topics such as using a variety of methods to generate laser pulses in the femtosecond and attosecond range with different wavelengths. This book includes 10 chapters. This book is a very relevant source for researchers as well as engineers working with high-powered laser systems around the world.
Download or read book High Power Optics written by Victor V. Apollonov and published by Springer. This book was released on 2014-11-21 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the basics, realization and materials for high power laser systems and high power radiation interaction with matter. The physical and technical fundamentals of high intensity laser optics and adaptive optics and the related physical processes in high intensity laser systems are explained. A main question discussed is: What is power optics? In what way is it different from ordinary optics widely used in cameras, motion-picture projectors, i.e., for everyday use? An undesirable consequence of the thermal deformation of optical elements and surfaces was discovered during studies of the interaction with powerful incident laser radiation. The requirements to the fabrication, performance and quality of optical elements employed within systems for most practical applications are also covered. The high-power laser performance is generally governed by the following: (i) the absorption of incident optical radiation (governed primarily by various absorption mechanisms), (ii) followed by a temperature increase and response governed primarily by thermal properties and (iii) the thermo-optical and thermo-mechanical response of distortion, stress, fracture, etc. All this needs to be understood to design efficient, compact, reliable and useful high power systems for many applications under a variety of operating conditions, pulsed, continuous wave and burst mode of varying duty cycles. The book gives an overview of an important spectrum of related topics like laser resonator configurations, intermetallic optical coatings, heat carriers for high power optics, cellular materials, high-repetition-rate lasers and mono-module disk lasers for high power optics.
Download or read book New Architectures for High Brightness Laser Emission written by Patrick Roumayah and published by . This book was released on 2020 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thanks to their high beam quality, compactness, and simplicity, the development of ytterbium fiber lasers has dominated the field of Directed Energy (DE) and high brightness continuous wave (CW) lasers in general for the last 10 years. This work has produced many 10’s of kilowatts diffraction limited emission by way of spectral or coherent beam combining of many individual channels. However, as the need arises for even higher power deployable systems, on the order of 100’s of kilowatts, the appearance of the Transverse Mode Instability (TMI) appears to be a limiting factor. In addition, the danger to bystanders in the usually uncontrollable environment associated with directed energy demands considerations for eye-safety in any such system.
Download or read book Rare Earth Doped Fiber Lasers and Amplifiers Revised and Expanded written by Michel J.F. Digonnet and published by CRC Press. This book was released on 2001-05-31 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rare-Earth-Doped Fiber Lasers and Amplifiers, Second Edition discusses the essential principles, operating characteristics, and current technology of the main fiber laser and amplifier devices based on rare-earth-doped silica and fluorozirconate fibers. Covering all aspects of this revolutionary technology, the book reviews fiber fabrication methods and the basic spectroscopic properties of rare-earth ions in glasses, concentrates on the most important fiber laser sources, examines several advances in fiber amplifiers, and analyzes new findings and improvements in single-frequency operation, frequency tenability, broadband fiber sources, and blue-green and far-infrared fiber lasers.
