EBookClubs

Read Books & Download eBooks Full Online

EBookClubs

Read Books & Download eBooks Full Online

Book Development of Three Point Bending Cylinder  3PBC  Asphalt Mixture Fatigue Test System

Download or read book Development of Three Point Bending Cylinder 3PBC Asphalt Mixture Fatigue Test System written by and published by . This book was released on 2022 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue cracking is one of the dominant distress types that a pavement structure experiences throughout its service life. The TRB IDEA (Innovations Deserving Exploratory Analysis) Program's NCHRP IDEA Final Report for Project 218: Development of Three Point Bending Cylinder (3PBC) Asphalt Mixture Fatigue Test System developed a new test method called the "three-point bending cylinder (3PBC) test." The primary benefit of this test method is that sample preparation and testing times are shorter than typical fatigue tests (auch as four-point bending and uniaxial fatigue) and the test fixture is easy to operate and inexpensive

Book Development of a Fast and Cost effective Asphalt Mixture Fatigue Test System

Download or read book Development of a Fast and Cost effective Asphalt Mixture Fatigue Test System written by Aksel Seitllari and published by . This book was released on 2020 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue cracking is one of the critical distress modes in asphalt pavements. Accurate prediction and evaluation of fatigue performance are crucial to extending the service life of asphalt mixtures. Naturally, laboratory testing methods for fatigue characterization are time-consuming and require sophisticated procedures. Any effort to improve the speed and quality of the information gained from laboratory fatigue tests is valuable. This research work presents the results of a study investigating the possibility of implementing a new approach to characterize asphalt mixture fatigue behavior. This new approach includes cyclic tests run on cylindrical asphalt specimens in three-point beam mode (herein referred to as three-point bending cylinder (3PBC) geometry). Timoshenko beam theory along with the viscoelastic continuum damage (VECD) theory was implemented to model the mechanical response of the specimens. An excellent correlation between the results of 3PBC tests and uniaxial push-pull fatigue tests were observed. The 3PBC setup possesses the most advantages of uniaxial push-pull tests and includes more advantages such as not requiring a saw to cut the ends of the sample, not requiring gluing operation (and the gluing jig) and the possibility of estimating Poisson's ratio from the data. The proposed 3PBC approach was evaluated through laboratory tests conducted on various asphalt mixtures with varying binder types, mix components, and volumetric properties. The approach proposed herein was validated through finite element analysis. In addition, ruggedness evaluation of the 3PBC testing approach through varying factors and their levels were investigated and presented.

Book Bituminous Mixtures and Pavements VIII

Download or read book Bituminous Mixtures and Pavements VIII written by A.F. Nikolaides and published by CRC Press. This book was released on 2024-06-21 with total page 999 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bituminous Mixtures and Pavements VIII contains 114 papers as presented at the 8th International Conference ‘Bituminous Mixtures and Pavements’ (8th ICONFBMP, 12-14 June 2024, Thessaloniki, Greece). The contributions reflect the research and practical experience of academics and practicing engineers from thirty-four (34) different countries, and cover a wide range of topics: Session I: Bitumen, Modified binders, Aggregates, and Subgrade Session II: Bituminous mixtures (Design, Construction, Testing, Performance) Session III: Pavements (Design, Construction, Maintenance, Sustainability, Energy and Environmental consideration) Session IV: Pavement management and Geosynthetics Session V: Pavement recycling Session VI: Pavement surface characteristics, Pavement performance monitoring, Safety Session VII: Biomaterials in pavement engineering Session VIII: Prediction models of pavement performance Bituminous Mixtures and Pavements VIII covers recent advances in highway materials technology and pavement engineering, and will be of interest to scientists and professionals involved or interested in these areas. The ICONFBMP-conferences have been organized every four years since 1992. This 8th conference was jointly organized by: Laboratory of Highway Engineering, Aristotle University of Thessaloniki, Greece; Built Environment Research Institute (BERI), University of Ulster, UK; University of Texas San Antonio (UTSA), USA; Laboratory for Advanced Construction Technology (LACT), Technological Institute of Iowa, USA; Technological University of Delft (TUDelft), The Netherlands, and University of Antwerp, (UA), Belgium.

Book Bituminous Mixtures and Pavements VII

Download or read book Bituminous Mixtures and Pavements VII written by A.F. Nikolaides and published by CRC Press. This book was released on 2019-05-24 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highway engineers are facing the challenge not only to design and construct sustainable and safe pavements properly and economically. This implies a thorough understanding of materials behaviour, their appropriate use in the continuously changing environment, and implementation of constantly improved technologies and methodologies. Bituminous Mixtures and Pavements VII contains more than 100 contributions that were presented at the 7th International Conference ‘Bituminous Mixtures and Pavements’ (7ICONFBMP, Thessaloniki, Greece 12-14 June 2019). The papers cover a wide range of topics: - Bituminous binders - Aggregates, unbound layers and subgrade - Bituminous mixtures (Hot, Warm and Cold) - Pavements (Design, Construction, Maintenance, Sustainability, Energy and environment consideration) - Pavement management - Pavement recycling - Geosynthetics - Pavement assessment, surface characteristics and safety - Posters Bituminous Mixtures and Pavements VII reflects recent advances in highway materials technology and pavement engineering, and will be of interest to academics and professionals interested or involved in these areas.

Book Four Point Bending

Download or read book Four Point Bending written by Jorge Carvalho Pais and published by CRC Press. This book was released on 2012-10-09 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cracking is recognized as one of the main causes of pavement deterioration, and is the primary cause of the need for maintenance and rehabilitation. Researchers around the world are working on the problem of cracking in asphalt pavements, with the goal of developing better understanding of the mechanics of cracking, creating test methods for assess

Book MODELING OF ASPHALT CONCRETE

Download or read book MODELING OF ASPHALT CONCRETE written by Y. Richard Kim and published by McGraw Hill Professional. This book was released on 2007-09-22 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Expert Guide to Developing More-Durable and Cost-Effective Asphalt Pavements Written by distinguished experts from countries around the world, Modeling of Asphalt Concrete presents in-depth coverage of the current materials, methods, and models used for asphalt pavements. Included is state-of-the-art information on fundamental material properties and mechanisms affecting the performance of asphalt concrete, new rheological testing and analysis techniques, constitutive models, and performance prediction methodologies for asphalt concrete and asphalt pavements. Emphasis is placed on the modeling of asphalt mixes for specific geographic/climatic requirements. In light of America's crumbling infrastructure and our heavy usage of asphalt as a paving material, this timely reference is essential for the development of more-durable and cost-effective asphalt materials for both new construction and rehabilitation. Harness the Latest Breakthroughs in Asphalt Concrete Technology: • Asphalt Rheology • Constitutive Models • Stiffness Characterization • Models for Low-Temperature Cracking • Models for Fatigue Cracking and Moisture Damage • Models for Rutting and Aging

Book Asphalt Pavements

Download or read book Asphalt Pavements written by Y. Richard Kim and published by CRC Press. This book was released on 2014-11-06 with total page 1966 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt Pavements contains the proceedings of the International Conference on Asphalt Pavements (Raleigh, North Carolina, USA, 1-5 June 2014), and discusses recent advances in theory and practice in asphalt materials and pavements. The contributions cover a wide range of topics:- Environmental protection and socio-economic impacts- Additives and mo

Book Analysis of Pavement Systems

Download or read book Analysis of Pavement Systems written by National Research Council (U.S.). Transportation Research Board and published by . This book was released on 1978 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: