Download or read book Development of Submerged In situ Non destructive Evaluation of Hydrogen in Zircaloy Fuel Cladding written by Erik Andrew Pfeif and published by . This book was released on 2010 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fast Quantitative and Nondestructive Evaluation on Hydrided LWR Fuel Cladding by Small Angle Incoherent Neutron Scattering of Hydrogen written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: A non-destructive neutron scattering method to precisely measure the uptake of hydrogen and the distribution of hydride precipitates in light water reactor (LWR) fuel cladding was developed. Zircaloy-4 cladding used in commercial LWRs was used to produce hydrided specimens. The hydriding apparatus consists of a closed stainless steel vessel that contains Zr alloy specimens and hydrogen gas. Following hydrogen charging, the hydrogen content of the hydrided specimens was measured using the vacuum hot extraction method, by which the samples with desired hydrogen concentration were selected for the neutron study. Optical microscopy shows that our hydriding procedure results in uniform distribution of circumferential hydrides across the wall. Small angle neutron incoherent scattering was performed in the High Flux Isotope Reactor at Oak Ridge National Laboratory. Our study demonstrates that the hydrogen in commercial Zircaloy-4 cladding can be measured very accurately in minutes by this nondestructive method over a wide range of hydrogen concentrations from a very small amount (20 ppm) to over 1000 ppm. The hydrogen distribution in a tube sample was obtained by scaling the neutron scattering rate with a factor determined by a calibration process using standard, destructive direct chemical analysis methods on the specimens. This scale factor can be used in future tests with unknown hydrogen concentrations, thus providing a nondestructive method for absolute hydrogen concentration determination.
Download or read book Pellet clad Interaction in Water Reactor Fuels written by and published by OECD Publishing. This book was released on 2005 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication sets out the findings of an international seminar, held in Aix-en-Provence, France in March 2004, which considered recent progress in the field of pellet-clad interaction in light water reactor fuels. It also reviews current understanding of relevant phenomena and their impact on the nuclear fuel rod under the widest possible conditions, and about both uranium-oxide and mixed-oxide fuels.
Download or read book Storage of Spent Nuclear Fuel written by International Atomic Energy Agency and published by . This book was released on 2021-04-30 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is a revision by amendment of IAEA Safety Standards Series No. SSG-15 and provides recommendations and guidance on the storage of spent nuclear fuel. It covers all types of storage facility and all types of spent fuel from nuclear power plants and research reactors. It takes into consideration the longer storage periods beyond the original design lifetime of the storage facility that have become necessary owing to delays in the development of disposal facilities and the reduction in reprocessing activities. It also considers developments associated with nuclear fuel, such as higher enrichment, mixed oxide fuels and higher burnup. Guidance is provided on all stages in the lifetime of a spent fuel storage facility, from planning through siting and design to operation and decommissioning. The revision was undertaken by amending, adding and/or deleting specific paragraphs addressing recommendations and findings from studying the accident at the Fukushima Daiichi nuclear power plant in Japan.
Download or read book Metals Abstracts written by and published by . This book was released on 1998 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Status of Fast Reactor Research and Technology Development written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Based on a recommendation from the Technical Working Group on Fast Reactors, this publication is a regular update of previous publications on fast reactor technology. The publication provides comprehensive and detailed information on the technology of fast neutron reactors. The focus is on practical issues that are useful to engineers, scientists, managers, university students and professors. The main issues of discussion are experience in design, construction, operation and decommissioning, various areas of research and development, engineering, safety and national strategies, and public acceptance of fast reactors. In the summary the reader will find national strategies, international initiatives on innovative (i.e. Generation IV) systems and an assessment of public acceptance as related to fast reactors."--Résumé de l'éditeur.
Download or read book The Safety of Nuclear Power Reactors light Water cooled and Related Facilities written by U.S. Atomic Energy Commission and published by . This book was released on 1973 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Damage Mechanisms and Life Assessment of High Temperature Components written by Ramaswamy Viswanathan and published by ASM International. This book was released on 1989 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thorium Energy for the Future written by A.K. Nayak and published by Springer. This book was released on 2019-01-30 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises selected proceedings of the ThEC15 conference. The book presents research findings on various facets of thorium energy, including exploration and mining, thermo-physical and chemical properties of fuels, reactor physics, challenges in fuel fabrication, thorium fuel cycles, thermal hydraulics and safety, material challenges, irradiation experiences, and issues and challenges for the design of advanced thorium fueled reactors. Thorium is more abundant than uranium and has the potential to provide energy to the world for centuries if used in a closed fuel cycle. As such, technologies for using thorium for power generation in nuclear reactors are being developed worldwide. Since there is a strong global thrust towards designing nuclear reactors with thorium-based fuel, this book will be of particular interest to nuclear scientists, reactor designers, regulators, academics and policymakers.
Download or read book Fluid Bed Technology in Materials Processing written by C. K. Gupta and published by CRC Press. This book was released on 1998-12-28 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid Bed Technology in Materials Processing comprehensively covers the various aspects of fluidization engineering and presents an elaborate examination of the applications in a multitude of materials processing techniques. This singular resource discusses: All the basic aspects of fluidization essential to understand and learn about various techniques The range of industrial applications Several examples in extraction and process metallurgy Fluidization in nuclear engineering and nuclear fuel cycle with numerous examples Innovative techniques and several advanced concepts of fluidization engineering, including use and applications in materials processing as well as environmental and bio-engineering Pros and cons of various fluidization equipment and specialty of their applications, including several examples Design aspects and modeling Topics related to distributors effects and flow regimes A separate chapter outlines the importance of fluidization engineering in high temperature processing, including an analysis of the fundamental concepts and applications of high temperature fluidized bed furnaces for several advanced materials processing techniques. Presenting information usually not available in a single source, Fluid Bed Technology in Materials Processing serves Fluidization engineers Practicing engineers in process metallurgy, mineral engineering, and chemical metallurgy Researchers in the field of chemical, metallurgical, nuclear, biological, environmental engineering Energy engineering professionals High temperature scientists and engineers Students and professionals who adopt modeling of fluidization in their venture for design and scale up
Download or read book Molten Salt Technology written by David G. Lovering and published by Springer. This book was released on 2014-11-14 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plentiful Energy written by Charles E. Till and published by Createspace Independent Publishing Platform. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Integral Fast Reactor (IFR) is a fast reactor system developed at Argonne National Laboratory in the decade 1984 to 1994. The IFR project developed the technology for a complete system; the reactor, the entire fuel cycle and the waste management technologies were all included in the development program. The reactor concept had important features and characteristics that were completely new and fuel cycle and waste management technologies that were entirely new developments. The reactor is a "fast" reactor - that is, the chain reaction is maintained by "fast" neutrons with high energy - which produces its own fuel. The IFR reactor and associated fuel cycle is a closed system. Electrical power is generated, new fissile fuel is produced to replace the fuel burned, its used fuel is processed for recycling by pyroprocessing - a new development - and waste is put in final form for disposal. All this is done on one self-sufficient site.The scale and duration of the project and its funding made it the largest nuclear energy R and D program of its day. Its purpose was the development of a long term massive new energy source, capable of meeting the nation's electrical energy needs in any amount, and for as long as it is needed, forever, if necessary. Safety, non-proliferation and waste toxicity properties were improved as well, these three the characteristics most commonly cited in opposition to nuclear power.Development proceeded from success to success. Most of the development had been done when the program was abruptly cancelled by the newly elected Clinton Administration. In his 1994 State of the Union address the president stated that "unnecessary programs in advanced reactor development will be terminated." The IFR was that program.This book gives the real story of the IFR, written by the two nuclear scientists who were most deeply involved in its conception, the development of its R and D program, and its management.Between the scientific and engineering papers and reports, and books on the IFR, and the non-technical and often impassioned dialogue that continues to this day on fast reactor technology, we felt there is room for a volume that, while accurate technically, is written in a manner accessible to the non-specialist and even to the non-technical reader who simply wants to know what this technology is.
Download or read book Materials Handbook written by François Cardarelli and published by Springer Science & Business Media. This book was released on 2008-03-19 with total page 1365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique and practical book provides quick and easy access to data on the physical and chemical properties of all classes of materials. The second edition has been much expanded to include whole new families of materials while many of the existing families are broadened and refined with new material and up-to-date information. Particular emphasis is placed on the properties of common industrial materials in each class. Detailed appendices provide additional information, and careful indexing and a tabular format make the data quickly accessible. This book is an essential tool for any practitioner or academic working in materials or in engineering.
Download or read book Status of Accelerator Driven Systems Research and Technology Development written by International Atomic Energy Agency and published by IAEA Tecdoc. This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the greatest challenges for nuclear energy is how to properly manage the highly radioactive waste generated during irradiation in nuclear reactors. Accelerator Driven Systems (ADSs) may offer new prospects and advantages for the transmutation of such high level nuclear waste. ADS or accelerator driven transmutation of waste (ATW) consists of a high power proton accelerator, a heavy metal spallation target that produces neutrons when bombarded by the high power beam, and a sub-critical core that is neutronically coupled to the spallation target. This publication provides a comprehensive state of the art of the ADS technology by representing the different ADS concepts proposed worldwide in the last 15 years, as well as the related R&D activities and demonstration initiatives carried out at national international level.
Download or read book Nuclear Power Plant Design Analysis written by Alexander Sesonske and published by . This book was released on 1973 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Decommissioning Techniques for Research Reactors written by International Atomic Energy Agency and published by . This book was released on 1994 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first report published by the IAEA which provides guidance on the preparation and implementation of the decommissioning of different types of research reactor. Different construction and operational features of research reactors have a major impact on the decommissioning techniques required. This report offers information on the conclusions drawn from a number of completed projects and identifies their similarities and differences. It is complemented by a computerized research reactor databank. Staff requirements, decommissioning costs waste activity are presented graphically according to reactor thermal power and integrated energy.
Download or read book Methods for the Minimization of Radioactive Waste from Decontamination and Decommissioning of Nuclear Facilities written by International Atomic Energy Agency and published by . This book was released on 2001 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simple text and photographs introduce the life of George Washington Carver.
