Download or read book Development Of Correlations For Supercritical Diesel Fuels Combustion written by Raja Sekhar Dondapati and published by LAP Lambert Academic Publishing. This book was released on 2014-06-02 with total page 112 pages. Available in PDF, EPUB and Kindle. Book excerpt: A novel concept of supercritical diesel fuels for clean combustion has been presented. Development of supercritical diesel fuel combustion technology needs consistent property data of fuel over a wide range of temperatures and pressures. This work is focussed on five diesel fuel surrogates such as n-heptane, n-octane, n-nonane, n-decane and toluene which have been identified as the components of real diesel fuel. Correlations for thermophysical properties such as density, heat capacity, thermal conductivity and viscosity above critical point at a constant pressure and over a wide range of temperature (TC+60K to TC+70K) have been developed. Also, the variation of such properties with respect to pressure plotted in 2-D and 3-D plots. Further, in order to ensure the accuracy of the developed correlations, different statistical parameters such as Absolute Average of Relative Error (AARE) and Sum of Average Residues (SAR) have been calculated and which shows an excellent agreement between the data obtained from REFPROP-NIST software program and the correlated properties. Combustion modelling requires such accurate correlations to predict performance and emissions.
Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on 2022-01-21 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively discusses diesel combustion phenomena like ignition delay, fuel-air mixing, rate of heat release, and emissions of smoke, particulate and nitric oxide. It enables quantitative evaluation of these important phenomena and parameters. Most importantly, it attempts to model them with constants that are independent of engine types and hence they could be applied by the engineers and researchers for a general engine. This book emphasizes the importance of the spray at the wall in precisely describing the heat release and emissions for most of the engines on and off-road. It gives models for heat release and emissions. Every model is thoroughly validated by detailed experiments using a broad range of engines. The book describes an elegant quasi-one-dimensional model for heat release in diesel engines with single as well as multiple injections. The book describes how the two aspects, namely, fuel injection rate and the diameter of the combustion bowl in the piston, have enabled meeting advanced emission, noise, and performance standards. The book also discusses the topics of computational fluid dynamics encompassing RANS and LES models of turbulence. Given the contents, this book will be useful for students, researchers and professionals working in the area of vehicle engineering and engine technology. This book will also be a good professional book for practising engineers in the field of combustion engines and automotive engineering.
Download or read book Issues on Clean Diesel Combustion Technology Using Supercritical Fluids written by Ronghong Lin and published by . This book was released on 2011 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ergonomics for Improved Productivity written by Mohammad Muzammil and published by Springer Nature. This book was released on 2021-03-23 with total page 1025 pages. Available in PDF, EPUB and Kindle. Book excerpt: p="" This highly informative and carefully presented book focuses on the fields of ergonomics/human factors and discusses the future of the community vis-à-vis health problems, productivity, aging, etc. Ergonomic intercession must be seen in light of its effect on productivity because ergonomic solutions will improve productivity as the reduction of environmental stressors, awkward postures and efforts lead to a reduction in task execution time. The book provides promising evidence that the field of ergonomics continues to thrive and develop deeper insights into how work environments, products and systems can be developed to meet needs, demands and limitations of humans and how they can support productivity improvements. Some of the themes covered are anthropometry and workplace design, biomechanics and modelling in ergonomics, cognitive and environmental ergonomics, ergonomic intervention and productivity, ergonomics in transport, mining, agriculture and forestry, health systems, work physiology and sports ergonomics, etc. This book is beneficial to academicians, policymakers and the industry alike. ^
Download or read book Biodiesel written by Ayhan Demirbas and published by Springer Science & Business Media. This book was released on 2007-12-20 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biodiesel: A Realistic Fuel Alternative for Diesel Engines describes the production and characterization of biodiesel. The book also presents current experimental research work in the field, including techniques to reduce biodiesel’s high viscosity. Researchers in renewable energy, as well as fuel engineers, will discover a myriad of new ideas and promising possibilities.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1988 with total page 1472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Clean Energy for Sustainable Development written by Kalam Abul Azad and published by Academic Press. This book was released on 2016-11-12 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clean Energy for Sustainable Development: Comparisons and Contrasts of New Approaches presents information on the fundamental challenge that the energy sector faces with regard to meeting the ever growing demand for sustainable, efficient, and cleaner energy. The book compares recent developments in the field of energy technology, clean and low emission energy, and energy efficiency and environmental sustainability for industry and academia. Rasul, Azad and Sharma, along with their team of expert contributors, provide high-end research findings on relevant industry themes, including clean and sustainable energy sources and technologies, renewable energy technologies and their applications, biomass and biofuels for sustainable environment, energy system and efficiency improvement, solar thermal applications, and the environmental impacts of sustainable energy systems. This book uses global institutes and case studies to explore and analyze technological advancements alongside practical applications. This approach helps readers to develop and affirm a better understanding of the relevant concepts and solutions necessary to achieve clean energy and sustainable development in both medium and large-scale industries. Compares in-depth research on a wide range of clean technologies, from global institutes in Australia, Europe, and India Evaluates the recent developments in clean technologies against the efficiency of tried and tested applications Considers case studies on the advancements of sustainable energy into industry from around the world
Download or read book Fossil Energy Update written by and published by . This book was released on 1981 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Index abstracts of SAE Technical Papers written by and published by . This book was released on 2001 with total page 912 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gasoline Engine Management written by Konrad Reif and published by Springer. This book was released on 2014-07-22 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: The call for environmentally compatible and economical vehicles necessitates immense efforts to develop innovative engine concepts. Technical concepts such as gasoline direct injection helped to save fuel up to 20 % and reduce CO2-emissions. Descriptions of the cylinder-charge control, fuel injection, ignition and catalytic emission-control systems provides comprehensive overview of today ́s gasoline engines. This book also describes emission-control systems and explains the diagnostic systems. The publication provides information on engine-management-systems and emission-control regulations.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering Abstracts written by and published by . This book was released on 1988 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Development of Heavy Duty Diesel Engines written by P. A. Lakshminarayanan and published by Springer Nature. This book was released on 2019-11-05 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended to serve as a comprehensive reference on the design and development of diesel engines. It talks about combustion and gas exchange processes with important references to emissions and fuel consumption and descriptions of the design of various parts of an engine, its coolants and lubricants, and emission control and optimization techniques. Some of the topics covered are turbocharging and supercharging, noise and vibrational control, emission and combustion control, and the future of heavy duty diesel engines. This volume will be of interest to researchers and professionals working in this area.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1990 with total page 1350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermodynamic Models for Industrial Applications written by Georgios M. Kontogeorgis and published by John Wiley & Sons. This book was released on 2009-12-01 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using an applications perspective Thermodynamic Models for Industrial Applications provides a unified framework for the development of various thermodynamic models, ranging from the classical models to some of the most advanced ones. Among these are the Cubic Plus Association Equation of State (CPA EoS) and the Perturbed Chain Statistical Association Fluid Theory (PC-SAFT). These two advanced models are already in widespread use in industry and academia, especially within the oil and gas, chemical and polymer industries. Presenting both classical models such as the Cubic Equations of State and more advanced models such as the CPA, this book provides the critical starting point for choosing the most appropriate calculation method for accurate process simulations. Written by two of the developers of these models, Thermodynamic Models for Industrial Applications emphasizes model selection and model development and includes a useful “which model for which application” guide. It also covers industrial requirements as well as discusses the challenges of thermodynamics in the 21st Century.
Download or read book Encyclopedia of Renewable Energy Sustainability and the Environment written by and published by Elsevier. This book was released on 2024-10-01 with total page 4061 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Renewable Energy, Sustainability and the Environment, Four Volume Set comprehensively covers all renewable energy resources, including wind, solar, hydro, biomass, geothermal energy, and nuclear power, to name a few. In addition to covering the breadth of renewable energy resources at a fundamental level, this encyclopedia delves into the utilization and ideal applications of each resource and assesses them from environmental, economic, and policy standpoints. This book will serve as an ideal introduction to any renewable energy source for students, while also allowing them to learn about a topic in more depth and explore related topics, all in a single resource. Instructors, researchers, and industry professionals will also benefit from this comprehensive reference. Covers all renewable energy technologies in one comprehensive resource“/li> Details renewable energies’ processes, from production to utilization in a single encyclopedia Organizes topics into concise, consistently formatted chapters, perfect for readers who are new to the field Assesses economic challenges faced to implement each type of renewable energy Addresses the challenges of replacing fossil fuels with renewables and covers the environmental impacts of each renewable energy
