Download or read book Development of Computational Models and Input Sensitivity Study of Polymer Reinforced Concrete Masonry Walls Subjected to Blast written by and published by . This book was released on 2004 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational models were developed and used to simulate polymer reinforced masonry walls subjected to blast loading and the models were used to understand the response of the structure. LS-DYNA, a nonlinear finite element solver, was used. Model development challenges were considered, and appropriate input parameters were determined. With these pedestal values, a baseline model of one unit width of concrete masonry block was developed, and the response under two load conditions was studied. Dimensional and mechanical variants involved in the system were varied to study their effect on wall behavior. The effects of door and window openings on the performance of the polymer reinforcement were evaluated. This report also presents an analysis of strain rate that occurs in the polymer coating and results were compared to theory-based closed form solutions. Finally, the static nonlinear capabilities of LS-DYNA were used to describe the static resistance of the system, and a theoretical description of a simply supported membrane subjected to pressure load is provided and compared with nonlinear finite element results.
Download or read book Concrete Solutions 2014 written by Michael Grantham and published by CRC Press. This book was released on 2014-08-18 with total page 838 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Concrete Solutions series of International Conferences on Concrete Repair began in 2003 with a conference held in St. Malo, France in association with INSA Rennes. Subsequent conferences have seen us partnering with the University of Padua in 2009 and with TU Dresden in 2011. This conference is being held for the first time in the UK, in association with Queen’s University Belfast and brings together delegates from 36 countries to discuss the latest advances and technologies in concrete repair. Earlier conferences were dominated by electrochemical repair, but there has been an interesting shift to more unusual methods, such as bacterial repair of concrete plus an increased focus on service life design aspects and modelling, with debate and discussion on the best techniques and the validity of existing methods. Repair of heritage structures is also growing in importance and a number of the papers have focused on the importance of getting this right, so that we may preserve our rich cultural heritage of historic structures. This book is an essential reference work for those working in the concrete repair field, from Engineers to Architects and from Students to Clients.
Download or read book Blast Simulator Wall Tests written by Michael G. Oesterle and published by . This book was released on 2009 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: Loads generated in explosions that result from terrorist attacks and industrial accidents create devastating hazards for buildings and their occupants. The objective of this dissertation is to develop design guidelines and methodologies for protective/hardening strategies used to mitigate blast hazards in reinforced concrete and concrete masonry walls. Commonly, guidelines and methodologies are developed from experimental data. Field testing with live explosive is a reliable experimental method for demonstrating the performance of blast resistant concepts, but it is expensive, time consuming, and often produces low quality data. Static testing is another experimental method that allows researchers to clearly observe behavior and failure modes of structural components; however this too is limited because it cannot account for the rate effects associated with blast loads. The UCSD Blast Simulator was developed to offers an alternative method for testing structures to loads generated in an explosion without the difficulties and limitations associated with field and static testing. For this dissertation, tests were conducted with the blast simulator to study reinforced concrete walls protected with frangible panels, concrete masonry walls strengthened with carbon fiber reinforced polymer composite, and unreinforced masonry walls retrofitted with polyurea catcher systems. The objective of the dissertation was achieved through a succession of tasks that included; the development of a test protocol, validation and implementation of numerical models to predict loads delivered to specimens during blast simulator tests, development of method to correlate blast simulator loads to air blast loads, generation of high quality data on specimens with mitigation strategies for validation of numerical models to predict response of hardened/protected reinforced concrete and concrete masonry walls, and investigation of design variables with parametric studies. The investigation of concrete masonry walls demonstrated that the addition of carbon fiber reinforced polymers can increase the resistance to blast loads, but may result in a brittle failure mode. The study of reinforced concrete walls showed that frangible panels can improve the response by adding mass to the system. Finally, the research performed on unreinforced masonry walls with polyurea catcher emphasized the need for proper connection detailing.
Download or read book Evaluation of Elastomeric Polymers Used for External Reinforcement of Masonry Walls Subjected to Blast written by Danica Leigh Thornburg and published by . This book was released on 2004 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Elastomeric Polymers for Retrofit of Unreinforced Masonry Walls Subjected to Blast written by James D. Connell and published by . This book was released on 2002 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Simplified Analytical Tools for Impact and Impulsive Loading Analysis of Reinforced Concrete Structures written by Andac Lulec and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The analysis of reinforced and prestressed concrete elements under blast and impact loading is drawing the interest of many researchers due to increasing number of natural or human-made hazards that require attention. The analysis methods used are mainly based on either simplified single degree-of-freedom methods or highly sophisticated and complex hydrocodes. Although single degree-of-freedom methods are commonly used by designers for practical reasons, they are incapable of providing detailed results such as deformed shapes and crack maps. Additionally, since they require simplification of the structure to a single degree-of-freedom system, they are difficult to apply to complex geometries. On the other hand, hydrocodes overcome the limitations associated with the simplification of the structure. However, they require highly detailed models which require significantly increased modelling and computational time. Moreover, the accuracy of blast and impact analyses with hydrocodes heavily relies on the material input parameters which are not commonly known. Thus, there remains a need for accurate, simplified and reliable tools for analysis of reinforced and prestressed concrete subjected to blast and impact loading. The VecTor family of nonlinear finite element programs, using a macro-element smeared rotating crack approach, has been shown to be accurate in predicting the response of shear-critical structures under quasi-static conditions. In this study, two members of this suite, VecTor3 and VecTor6, were adapted for the blast and impact analyses of reinforced and prestressed concrete structures in 3D and axisymmetric conditions, respectively. The results obtained from the simulations were close to those experimentally observed. Additionally, a semi-analytical formula for the prediction of perforation velocity from missile impact was developed. The formula, which is based on the Modified Compression Field Theory, considers the influence of longitudinal and shear reinforcement in the target differently from other commonly used empirical formulae. The formula was validated with numerous missile impact data available in the literature, and good accuracy was found.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1992 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook for Blast Resistant Design of Buildings written by Donald O. Dusenberry and published by John Wiley & Sons. This book was released on 2010-01-26 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique single reference supports functional and cost-efficient designs of blast resistant buildings Now there's a single reference to which architects, designers, and engineers can turn for guidance on all the key elements of the design of blast resistant buildings that satisfy the new ASCE Standard for Blast Protection of Buildings as well as other ASCE, ACI, and AISC codes. The Handbook for Blast Resistant Design of Buildings features contributions from some of the most knowledgeable and experienced consultants and researchers in blast resistant design. This handbook is organized into four parts: Part 1, Design Considerations, sets forth basic principles, examining general considerations in the design process; risk analysis and reduction; criteria for acceptable performance; materials performance under the extraordinary blast environment; and performance verification for technologies and solution methodologies. Part 2, Blast Phenomena and Loading, describes the explosion environment, loading functions needed for blast response analysis, and fragmentation and associated methods for effects analysis. Part 3, System Analysis and Design, explains the analysis and design considerations for structural, building envelope, component space, site perimeter, and building system designs. Part 4, Blast Resistant Detailing, addresses the use of concrete, steel, and masonry in new designs as well as retrofitting existing structures. As the demand for blast resistant buildings continues to grow, readers can turn to the Handbook for Blast Resistant Design of Buildings, a unique single source of information, to support competent, functional, and cost-efficient designs.
Download or read book Guidelines for earthquake resistant non engineered construction written by Arya, Anand S and published by UNESCO. This book was released on 2014-08-25 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Engineering Index Annual written by and published by . This book was released on 1994 with total page 2398 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its creation in 1884, Engineering Index has covered virtually every major engineering innovation from around the world. It serves as the historical record of virtually every major engineering innovation of the 20th century. Recent content is a vital resource for current awareness, new production information, technological forecasting and competitive intelligence. The world?s most comprehensive interdisciplinary engineering database, Engineering Index contains over 10.7 million records. Each year, over 500,000 new abstracts are added from over 5,000 scholarly journals, trade magazines, and conference proceedings. Coverage spans over 175 engineering disciplines from over 80 countries. Updated weekly.
Download or read book Structural Design for Fire Safety written by Andrew H. Buchanan and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.
Download or read book Explosions in Air written by Wilfred Edmund Baker and published by . This book was released on 1973 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bulletin of the Atomic Scientists written by and published by . This book was released on 1972-10 with total page 64 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Bulletin of the Atomic Scientists is the premier public resource on scientific and technological developments that impact global security. Founded by Manhattan Project Scientists, the Bulletin's iconic "Doomsday Clock" stimulates solutions for a safer world.
Download or read book Computational Structural Engineering written by Yong Yuan and published by Springer Science & Business Media. This book was released on 2009-06-05 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following the great progress made in computing technology, both in computer and programming technology, computation has become one of the most powerful tools for researchers and practicing engineers. It has led to tremendous achievements in computer-based structural engineering and there is evidence that current devel- ments will even accelerate in the near future. To acknowledge this trend, Tongji University, Vienna University of Technology, and Chinese Academy of Engine- ing, co-organized the International Symposium on Computational Structural En- neering 2009 in Shanghai (CSE’09). CSE’09 aimed at providing a forum for presentation and discussion of sta- of-the-art development in scientific computing applied to engineering sciences. Emphasis was given to basic methodologies, scientific development and engine- ing applications. Therefore, it became a central academic activity of the Inter- tional Association for Computational Mechanics (IACM), the European Com- nity on Computational Methods in Applied Sciences (ECCOMAS), The Chinese Society of Theoretical and Applied Mechanic, the China Civil Engineering So- ety, and the Architectural Society of China. A total of 10 invited papers, and around 140 contributed papers were p- sented in the proceedings of the symposium. Contributors of papers came from 20 countries around the world and covered a wide spectrum related to the compu- tional structural engineering.
Download or read book Strengthening Forensic Science in the United States written by National Research Council and published by National Academies Press. This book was released on 2009-07-29 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scores of talented and dedicated people serve the forensic science community, performing vitally important work. However, they are often constrained by lack of adequate resources, sound policies, and national support. It is clear that change and advancements, both systematic and scientific, are needed in a number of forensic science disciplines to ensure the reliability of work, establish enforceable standards, and promote best practices with consistent application. Strengthening Forensic Science in the United States: A Path Forward provides a detailed plan for addressing these needs and suggests the creation of a new government entity, the National Institute of Forensic Science, to establish and enforce standards within the forensic science community. The benefits of improving and regulating the forensic science disciplines are clear: assisting law enforcement officials, enhancing homeland security, and reducing the risk of wrongful conviction and exoneration. Strengthening Forensic Science in the United States gives a full account of what is needed to advance the forensic science disciplines, including upgrading of systems and organizational structures, better training, widespread adoption of uniform and enforceable best practices, and mandatory certification and accreditation programs. While this book provides an essential call-to-action for congress and policy makers, it also serves as a vital tool for law enforcement agencies, criminal prosecutors and attorneys, and forensic science educators.
Download or read book Twentieth Century Building Materials written by Thomas C. Jester and published by Getty Publications. This book was released on 2014-08-01 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the concluding decades of the twentieth century, the historic preservation community increasingly turned its attention to modern buildings, including bungalows from the 1930s, gas stations and diners from the 1940s, and office buildings and architectural homes from the 1950s. Conservation efforts, however, were often hampered by a lack of technical information about the products used in these structures, and to fill this gap Twentieth-Century Building Materials was developed by the U.S. Department of the Interior’s National Park Service and first published in 1995. Now, this invaluable guide is being reissued—with a new preface by the book’s original editor. With more than 250 illustrations, including a full-color photographic essay, the volume remains an indispensable reference on the history and conservation of modern building materials. Thirty-seven essays written by leading experts offer insights into the history, manufacturing processes, and uses of a wide range of materials, including glass block, aluminum, plywood, linoleum, and gypsum board. Readers will also learn about how these materials perform over time and discover valuable conservation and repair techniques. Bibliographies and sources for further research complete the volume. The book is intended for a wide range of conservation professionals including architects, engineers, conservators, and material scientists engaged in the conservation of modern buildings, as well as scholars in related disciplines.
