Download or read book Development of an Innovative System for the Reconstruction of New Generation Satellite Images written by Luca Lorenzi and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Digital Surface Model Generation Over Urban Areas Using High Resolution Satellite SAR Imagery written by Martina Porfiri and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The urbanization and the management of urban environment and its periphery become one of the most crucial issues in developed and developing countries. In these circumstances, remote sensing data are an important source of information that reflects interactions between human beings and their environment. Given their complete independence from logistic constraints on the ground, illumination (daylight), and weather (clouds) conditions, Synthetic Aperture Radar (SAR) satellite systems may provide important contributions in complex environments 3-D reconstruction. The new generation of high resolution SAR sensors as COSMO-SkyMed, TerraSAR-X and RADARSAT-2 allowed to acquire high resolution SAR imagery. Here the attention is put on the 3-D imaging technique called SAR Tomography: starting from a stack of images collected using multibaseline data performed in interferometric configuration, such a technique allows to retrieve height information forming a synthetic aperture in the elevation direction in order to achieve a substantially improved resolution. The present PhD thesis is focused on the high potentialities of tomographic techniques in 3-D change monitoring and characterization for complex and dense built-up areas using basic mono-dimensional estimators as Beamforming, Capon and MUSIC combined to very high satellite SAR resolution imagery. 2-D and 3-D analysis have been presented over the urban area of Paris using TerraSAR-X data at high resolution and single polarisation. Being mainly focused on the 3-D tomographic techniques, in the presented work 4-D methods, such as compressive sensing (CS), have not been taken into account. At first, the analysis of the interferometric quality of the processed data set has been performed and results showed good mean coherence values within the entire stack. The extraction of 2-D tomograms over different azimuth-profile has showed the capabilities to distinguish more than one scatterer within the same resolution cell and to reconstruct the vertical building profiles. Successively, a global 3-D characterization both in term of buildings heights and vertical reflectivity has been performed in order to develop a monitoring tool for the changes of single structures. Moreover, the possibility to correct the geometric distortions due to the layover (that strongly affects such kind of scenarios) and to determine the information about the number of scatterers (up to three) and the corresponding reflectivity within one resolution cell have been evaluated. Moreover an innovative time stability analysis of the observed scene have been carried out in order to detect the stable and unstable scatterers. Globally, the investigations showed noisier and sparser point clouds for the Capon method, whereas better capabilities for the Beamforming and MUSIC ones. Indeed, it was possible to detect different scatterers located within the same resolution cell and to resolve pixels affected by the layover. This has lead to perform a good reconstruction of building shape and location and a good estimation of their elevation. The 3-D time stability analysis demonstrated the possibility to monitor the 3-D change depending on the time. Eventually, it is possible to assert that processing high resolution SAR data allows to achieve a strong improvement in 3-D imaging capabilities. It has been demonstrated the potentialities of TomoSAR technique in distortions correction and in 3-D change monitoring using basic mono-dimensional estimators.
Download or read book Frontiers in Biomedical Engineering written by Ned H.C. Hwang and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Frontiers in Biomedical Engineering will be an edited work taken from the 1st Annual World Congress of Chinese Biomedical Engineers - Taipei, Taiwan 2002. As the economy develops rapidly in China and the Asian-Pacific population merges into the global healthcare system, many researchers in the West are trying to make contact with the Chinese BME scientists. At WCCBME 2002, invited leaders, materials scientists, bioengineers, molecular and cellular biologists, orthopaedic surgeons, and manufacturers from P.R. of China, Taiwan, Singapore and Hong Kong covered all five major BME domains: biomechanics, biomaterials and tissue engineering, medical imaging, biophotonics and instrumentation, and rehabilitation. This edited work taken from the World Congress proceedings will capture worldwide readership.
Download or read book Advancing Nuclear Medicine Through Innovation written by National Research Council and published by National Academies Press. This book was released on 2007-09-11 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nearly 20 million nuclear medicine procedures are carried out each year in the United States alone to diagnose and treat cancers, cardiovascular disease, and certain neurological disorders. Many of the advancements in nuclear medicine have been the result of research investments made during the past 50 years where these procedures are now a routine part of clinical care. Although nuclear medicine plays an important role in biomedical research and disease management, its promise is only beginning to be realized. Advancing Nuclear Medicine Through Innovation highlights the exciting emerging opportunities in nuclear medicine, which include assessing the efficacy of new drugs in development, individualizing treatment to the patient, and understanding the biology of human diseases. Health care and pharmaceutical professionals will be most interested in this book's examination of the challenges the field faces and its recommendations for ways to reduce these impediments.
Download or read book The Retinal Atlas E Book written by K. Bailey Freund and published by Elsevier Health Sciences. This book was released on 2016-11-14 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: With more than 5,000 images and comprehensive illustrations of the entire spectrum of vitreous, retina, and macula disorders, The Retinal Atlas, 2nd Edition, is an indispensable reference for retina specialists and comprehensive ophthalmologists as well as residents and fellows in training. For this edition, an expanded author team made up of Drs. K. Bailey Freund, David Sarraf, William F. Mieler, and Lawrence A. Yannuzzi, each an expert in retinal research and imaging, provide definitive up-to-date perspectives in this rapidly advancing field. This award-winning title has been thoroughly updated with new images with multimodal illustrations, new coverage and insight into key topics, and new disorders and classifications making it the most useful and most complete atlas of its kind. Provides a complete visual guide to advanced retinal imaging and diagnosis of the full spectrum of retinal diseases, including early and later stages of disease. Enhances understanding by presenting comparison imaging modalities, composite layouts, high-power views, panoramic disease visuals, and selected magnified areas to hone in on key findings and disease patterns. Features color coding for different imaging techniques, as well as user-friendly arrows, labels, and magnified images that point to key lesions and intricacies. Covers all current retinal imaging methods including: optical coherence tomography (OCT), indocyanine green angiography, fluorescein angiography, and fundus autofluorescence. Depicts and explains expanding OCT uses, including spectral domain and en face OCT, and evolving retinal imaging modalities such as ultra-wide-field fundus photography, angiography and autofluorescence. Presents a select team of experts, all of whom are true international leaders in retinal imaging, and have assisted in contributing to the diverse library of common and rare case illustrations.
Download or read book Vascular Imaging of the Central Nervous System written by Joana Ramalho and published by John Wiley & Sons. This book was released on 2014-03-31 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book-length reference to thoroughly describe diagnostic and therapeutic advances in the development of vascular radiology over the last decade The last ten years has seen vascular imaging of the central nervous system (CNS) evolve from fairly crude, invasive procedures to more advanced imaging methods that are safer, faster, and more precise—with computed tomographic (CT) and magnetic resonance (MR) imaging methods playing a special role in these advances. Vascular Imaging of the Central Nervous System is the first full-length reference text that shows radiologists—especially neuroradiologists—how to optimize the use of the many techniques available in order to increase the sensitivity and specificity of vascular imaging, thereby improving the diagnosis and treatment of individual patients. Each chapter is formatted carefully and divided into two essential parts: The first part describes the physical principles underlying each imaging technique, along potential associated artifacts and pitfalls; the second part addresses clinical applications and novel applications of each method. With a strong focus on the clinical application of each modality or technique in CNS radiology, this book provides in-depth chapter coverage of: • Ultrasound Vascular Imaging (UVI) • Computed Tomography Angiography (CTA) • Magnetic Resonance Vascular imaging (MRV) • Digital subtraction angiography (DSA) • Brain perfusion techniques: CT and MRI • Plaque imaging • Intravascular imaging • Pediatric vascular imaging Along with numerous illustrations and case studies, Vascular Imaging of the Central Nervous System: Physical Principles, Clinical Applications, and Emerging Techniques is an important book for those faced with choosing from the wide range of choices available for clinical practice.
Download or read book Advances in Mobile Mapping Technology written by C. Vincent Tao and published by CRC Press. This book was released on 2007-02-08 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing market penetration of Internet mapping, satellite imaging and personal navigation has opened up great research and business opportunities to geospatial communities. Multi-platform and multi-sensor integrated mapping technology has clearly established a trend towards fast geospatial data acquisition. Sensors can be mounted on various pla
Download or read book Innovative Developments in Virtual and Physical Prototyping written by Paulo Jorge da Silva Bartolo and published by CRC Press. This book was released on 2011-09-16 with total page 870 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovative Developments in Virtual and Physical Prototyping presents essential research in the area of Virtual and Rapid Prototyping. The volume contains reviewed papers presented at the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, hosted by the Centre for Rapid and Sustainable Product Development of the Polytechnic Institute of Leiria, Portugal, from September 28 to October 1, 2011. A wide range of topics is covered, such as CAD and 3D Data Acquisition Technologies, Additive and Nano Manufacturing Technologies, Rapid Tooling & Manufacturing, Biomanufacturing, Materials for Advanced Manufacturing Processes, Virtual Environments and Simulation, Applications of Virtual and Physical Prototyping Technologies. Innovative Developments in Virtual and Physical Prototyping is intended for engineers, designers and manufacturers who are active in the areas of mechanical, industrial and biomedical engineering.
Download or read book Engineering Innovation and Design written by Artde Donald Kin-Tak Lam and published by CRC Press. This book was released on 2019-05-31 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume represents the proceedings of the 7th International Conference on Innovation, Communication and Engineering (ICICE 2018), which was held in P.R. China, November 9-14, 2018. The conference aimed to provide an integrated communication platform for researchers in a wide range of fields including information technology, communication science, applied mathematics, computer science, advanced material science, and engineering. Hopefully, the conference and resulting proceedings will enhance interdisciplinary collaborations between science and engineering technologists in academia and industry within this unique international network.
Download or read book 4th International Symposium of Space Optical Instruments and Applications written by H. Paul Urbach and published by Springer. This book was released on 2018-10-05 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected and expanded contributions presented at the 4th Symposium on Space Optical Instruments and Applications, which was held in Delft, the Netherlands, on October 16–18, 2017. This conference series is organized by the Sino-Holland Space Optical Instruments Laboratory, a cooperative platform between China and the Netherlands. The symposium focused on key technological problems regarding optical instruments and their applications in a space context. It covered the latest developments, experiments and results on the theory, instrumentation and applications of space optics. The book is split into five main sections: The first covers optical remote sensing system design, the second focuses on advanced optical system design, and the third addresses remote sensor calibration and measurement. Remote sensing data processing and information extraction are then presented, followed by a final section on remote sensing data applications.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book New Innovations in AI Aviation and Air Traffic Technology written by Khalid, Saifullah and published by IGI Global. This book was released on 2024-07-17 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid advancement of technology, along with the increasing complexity of air traffic management present significant challenges in aviation management. As the industry continues to evolve, aviation professionals must stay updated with the latest advancements to ensure safe and efficient operations. However, accessing comprehensive and up-to-date resources can be difficult, leading to a knowledge gap that hinders the industry's progress. New Innovations in AI, Aviation, and Air Traffic Technology offers a solution to the challenges faced by aviation management professionals by providing a comprehensive overview of futuristic research trends in aviation management. Through case studies, simulations, and experimental results, we offer readers a detailed exploration of the latest trends in air traffic management, uncrewed aerial vehicles (UAVs), electric vehicles, and more. By providing a bridge between theory and practice, this book equips aviation professionals with the knowledge and tools needed to navigate and contribute to the rapidly evolving aviation industry.
Download or read book Advanced Remote Sensing written by Shunlin Liang and published by Academic Press. This book was released on 2012-12-06 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Remote Sensing is an application-based reference that provides a single source of mathematical concepts necessary for remote sensing data gathering and assimilation. It presents state-of-the-art techniques for estimating land surface variables from a variety of data types, including optical sensors such as RADAR and LIDAR. Scientists in a number of different fields including geography, geology, atmospheric science, environmental science, planetary science and ecology will have access to critically-important data extraction techniques and their virtually unlimited applications. While rigorous enough for the most experienced of scientists, the techniques are well designed and integrated, making the book's content intuitive, clearly presented, and practical in its implementation. - Comprehensive overview of various practical methods and algorithms - Detailed description of the principles and procedures of the state-of-the-art algorithms - Real-world case studies open several chapters - More than 500 full-color figures and tables - Edited by top remote sensing experts with contributions from authors across the geosciences
Download or read book Global Trends 2040 written by National Intelligence Council and published by Cosimo Reports. This book was released on 2021-03 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The ongoing COVID-19 pandemic marks the most significant, singular global disruption since World War II, with health, economic, political, and security implications that will ripple for years to come." -Global Trends 2040 (2021) Global Trends 2040-A More Contested World (2021), released by the US National Intelligence Council, is the latest report in its series of reports starting in 1997 about megatrends and the world's future. This report, strongly influenced by the COVID-19 pandemic, paints a bleak picture of the future and describes a contested, fragmented and turbulent world. It specifically discusses the four main trends that will shape tomorrow's world: - Demographics-by 2040, 1.4 billion people will be added mostly in Africa and South Asia. - Economics-increased government debt and concentrated economic power will escalate problems for the poor and middleclass. - Climate-a hotter world will increase water, food, and health insecurity. - Technology-the emergence of new technologies could both solve and cause problems for human life. Students of trends, policymakers, entrepreneurs, academics, journalists and anyone eager for a glimpse into the next decades, will find this report, with colored graphs, essential reading.
Download or read book Innovations in GIS 6 written by Bruce Gittings and published by CRC Press. This book was released on 1999-09-23 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrating Information with GI Technology examines the components necessary for building infrastructure to support the panoly of Geographic Information (GI) research and services. These include novel approaches to two- and three-dimensional spatial analysis and spatio-temporal modelling. The book establishes the case for the Web as the technologic
Download or read book Radiation Dose from Multidetector CT written by Denis Tack and published by Springer Science & Business Media. This book was released on 2012-06-05 with total page 642 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computed tomography (CT) is a powerful technique providing precise and confident diagnoses. The burgeoning use of CT has resulted in an exponential increase in collective radiation dose to the population. Despite investigations supporting the use of lower radiation doses, surveys highlight the lack of proper understanding of CT parameters that affect radiation dose. Dynamic advances in CT technology also make it important to explain the latest dose-saving strategies in an easy-to-comprehend manner. This book aims to review all aspects of the radiation dose from CT and to provide simple rules and tricks for radiologists and radiographers that will assist in the appropriate use of CT technique. The second edition includes a number of new chapters on the most up-to-date strategies and technologies for radiation dose reduction while updating the outstanding contents of the first edition. Vendor perspectives are included, and an online image gallery will also be available to readers.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt:
