Download or read book Development of a Transparent Material to Model the Geotechnical Properties of Soils written by MG. Iskander and published by . This book was released on 1994 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measurement of three-dimensional deformation patterns and flow characteristics within a soil continuum are usually limited by the fact that soil sensors do not provide a continuous image of the measured continuum. Additionally, soil sensors exhibit static and dynamic characteristics that are different from those of the surrounding soils and therefore can change the response of the measured continuum. Tests conducted with a transparent material which has properties that closely model the geotechnical properties of natural soils can potentially circumvent these experimental problems if the response of a model transparent continuum can be measured using nonintrusive optical visualization techniques.

Download or read book Modelling with Transparent Soils written by Magued Iskander and published by Springer Science & Business Media. This book was released on 2010-07-15 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: up with automated systems for assessment of road condition. For example, Haas et al (1997) developed an automated algorithm for detecting cracks and joints con- tion. Smith and Lin (1997) developed a fuzzy logic classification scheme for pavement distress condition. Oh et al (1997) developed iterative algorithm for overcoming noisy images of roads due to shadows and low light conditions. Koustsopoulos and Mishalani (1997) presented a model for distress assessment in a local (microscopic) and global (macroscopic) level using captured images of pavement. Lee (1993) presented a comparison between 15 different imaging al- rithms used in crack detection. Ground Penetration Radar (GPR) has also been used for pavement assessment. Special computer algorithms were developed for quick analysis of GPR data (Adeli & Hung 1993 and Maser 1996). Heiler and McNeil (1997) proposed a modified system for analyzing the GPR data using an artificial neural network (ANN). 2.3.2 Traffic Analysis and Control Currently imaging systems provide essential data for transportation and traffic engineering planning (Anon 1999). Machine vision techniques were introduced to intersection traffic signal control in the late 1970’s (Chou and Sethi 1993). No- days, many systems have been developed all over the world for traffic analysis and control applications, in addition to image based systems for traffic violations. Nallamathu and Wang (1997) developed one of the first automated systems for license plate recognition using character recognition algorithm for the use in monitoring violators at toll stations and many other traffic applications.

Download or read book Transparent Soil Modelling Technique and Its Application written by Honghua Zhao and published by Springer Nature. This book was released on 2022-11-29 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book systematically introduces the advancement of transparent soil modelling technique and its application. The transparent soil modelling technique provides an essential tool for visualizing soil-structure interaction and other geotechnical problems such as grouting, soil plugging. The geotechnical properties of the newest transparent soils were reported on model sand, clay and rock. In addition, more advanced image processing methods were summarized. In this book, numerous applications of transparent soil modelling techniques for different geotechnical problems were presented, and the results obtained are supplemented by numerical calculation and theoretical analysis.

Download or read book Physical Modelling in Geotechnics Volume 1 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 1455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 1 of a 2-volume set.

Download or read book Physical Modelling in Geotechnics Two Volume Set written by Sarah Springman and published by CRC Press. This book was released on 2010-06-17 with total page 1530 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book results from the 7th ICPMG meeting in Zurich 2010 and covers a broad range of aspects of physical modelling in geotechnics, linking across to other modelling techniques to consider the entire spectrum required in providing innovative geotechnical engineering solutions. Topics presented at the conference: Soil – Structure – Interaction; Natural Hazards; Earthquake Engineering: Soft Soil Engineering; New Geotechnical Physical; Modelling Facilities; Advanced Experimental Techniques; Comparisons between Physical and Numerical Modelling Specific Topics: Offshore Engineering; Ground Improvement and Foundations; Tunnelling, Excavations and Retaining Structures; Dams and slopes; Process Modelling; Goenvironmental Modelling; Education

Download or read book Deformation Characteristics of Geomaterials written by V.A. Rinaldi and published by IOS Press. This book was released on 2015-12-11 with total page 1236 pages. Available in PDF, EPUB and Kindle. Book excerpt: In November 2015, Buenos Aires, Argentina became the location of several important events for geo-professionals, with the simultaneous holding of the 6th International Symposium on Deformation Characteristics of Geomaterials, the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), the 8th South American Congress on Rock Mechanics (SCRM), as well as the 22nd Argentinean Congress of Geotechnical Engineering (CAMSIGXXII). This synergy provided a unique opportunity to exchange ideas and discuss current and future practices in the areas of soil mechanics and rock mechanics, and their applications in civil, energy, environmental, and mining engineering. This book presents the proceedings of the 6th International Symposium on Deformation Characteristics of Geomaterials. As well as 118 articles selected for publication after peer review, it includes 7 lectures delivered by invited keynote speakers and the Third Bishop Lecture, delivered by Professor Herve Di Benedetto of the University of Lyon, France, who presented a reference work on the advanced testing and modeling of bituminous bounded and unbounded granular materials. The conference brought together practitioners, researchers and educators from around the world engaged in the understanding of the deformation properties of geo-materials before failure, and the small strain parameters as fundamental characteristics of geo-materials. The main topics covered by the symposium include experimental investigations from very small strains to beyond failure, including multi-physical approach; HTC M coupling behavior, characterization and modeling of various geo-materials and interfaces; and practical prediction and interpretation of ground responses: field observation and case histories.

Download or read book Physical Modelling in Geotechnics written by P. Guo and published by Taylor & Francis. This book was released on 2022-11-22 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers cover topics including: physical modelling facilities; experimental advances; seismic experimental advances; education; soil behaviour; offshore systems; cold regions; geo-environment; dynamics; earthquake effects; and strategies for disaster reduction.

Download or read book ICPMG2014 Physical Modelling in Geotechnics written by Christophe Gaudin and published by CRC Press. This book was released on 2019-01-08 with total page 1366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th International Conference on Physical Modelling in Geotechnics (ICPMG2014) was organised by the Centre for Offshore Foundation Systems at the University of Western Australia under the auspices of the Technical Committee 104 for Physical Modelling in Geotechnics of the International Society of Soil Mechanics and Geotechnical Engineering. This quadrennial conference is the traditional focal point for the physical modelling community of academics, scientists and engineers to present and exchange the latest developments on a wide range of physical modelling aspects associated with geotechnical engineering. These proceedings, together with the seven previous proceedings dating from 1988, present an inestimable collection of the technical and scientific developments and breakthroughs established over the last 25 years. These proceedings include 10 keynote lectures from scientific leaders within the physical modelling community and 160 peer-reviewed papers from 26 countries. They are organised in 14 themes, presenting the latest developments in physical modelling technology, modelling techniques and sensors, through a wide range of soil-structure interaction problems, including shallow and deep foundations, offshore geotechnics, dams and embankments, excavations and retaining structures and slope stability. Fundamental aspects of earthquake engineering, geohazards, ground reinforcements and improvements, and soil properties and behaviour are also covered, demonstrating the increasing complexity of modelling arising from state-of-the-art technological developments and increased understanding of similitude principles. A special theme on education presents the latest developments in the use of physical modelling techniques for instructing undergraduate and postgraduate students in geotechnical engineering.

Download or read book Geotechnical Testing Journal written by and published by . This book was released on 1994 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Frontiers in Offshore Geotechnics III written by Vaughan Meyer and published by CRC Press. This book was released on 2015-05-15 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Offshore Geotechnics III comprises the contributions presented at the Third International Symposium on Frontiers in Offshore Geotechnics (ISFOG, Oslo, Norway, 10-12 June 2015), organised by the Norwegian Geotechnical Institute (NGI). The papers address current and emerging geotechnical engineering challenges facing those working in off

Download or read book Canadian Geotechnical Journal written by and published by . This book was released on 2010 with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Soil and Rock America 2003 written by Patricia J. Culligan and published by . This book was released on 2003 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Applied Research Using a Transparent Material with Hydraulic Properties Similar to Soil written by AL. Welker and published by . This book was released on 1999 with total page 5 pages. Available in PDF, EPUB and Kindle. Book excerpt: An innovative material, transparent soil, was used to study flow from a prefabricated vertical drain (PVD). Transparent soil is a mixture of mineral oil, solvent, and amorphous silica. Before using the material to study PVD flow patterns, testing was completed to verify previously published values for hydraulic conductivity and porosity. The results of the independent testing matched the published results well. Experiments using scaled-down and full-size PVDs were completed in cells with diameters ranging from 10.2 to 30.0 cm, respectively. The results of these tests compared favorably to those obtained using an electrical analog and a mathematical model. The transparent soil was an acceptable representation of soil; however, degradations in transparency can be a problem in larger samples. Some other difficulties in using transparent soil, such as finding acceptable sealants and preventing dying of the silica particles, are discussed. In addition, recommended areas of continued research are presented.

Download or read book Physical Modelling in Geotechnics Volume 2 written by Andrew McNamara and published by CRC Press. This book was released on 2018-07-11 with total page 1333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physical Modelling in Geotechnics collects more than 1500 pages of peer-reviewed papers written by researchers from over 30 countries, and presented at the 9th International Conference on Physical Modelling in Geotechnics 2018 (City, University of London, UK 17-20 July 2018). The ICPMG series has grown such that two volumes of proceedings were required to publish all contributions. The books represent a substantial body of work in four years. Physical Modelling in Geotechnics contains 230 papers, including eight keynote and themed lectures representing the state-of-the-art in physical modelling research in aspects as diverse as fundamental modelling including sensors, imaging, modelling techniques and scaling, onshore and offshore foundations, dams and embankments, retaining walls and deep excavations, ground improvement and environmental engineering, tunnels and geohazards including significant contributions in the area of seismic engineering. ISSMGE TC104 have identified areas for special attention including education in physical modelling and the promotion of physical modelling to industry. With this in mind there is a special themed paper on education, focusing on both undergraduate and postgraduate teaching as well as practicing geotechnical engineers. Physical modelling has entered a new era with the advent of exciting work on real time interfaces between physical and numerical modelling and the growth of facilities and expertise that enable development of so called ‘megafuges’ of 1000gtonne capacity or more; capable of modelling the largest and most complex of geotechnical challenges. Physical Modelling in Geotechnics will be of interest to professionals, engineers and academics interested or involved in geotechnics, geotechnical engineering and related areas. The 9th International Conference on Physical Modelling in Geotechnics was organised by the Multi Scale Geotechnical Engineering Research Centre at City, University of London under the auspices of Technical Committee 104 of the International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE). City, University of London, are pleased to host the prestigious international conference for the first time having initiated and hosted the first regional conference, Eurofuge, ten years ago in 2008. Quadrennial regional conferences in both Europe and Asia are now well established events giving doctoral researchers, in particular, the opportunity to attend an international conference in this rapidly evolving specialist area. This is volume 2 of a 2-volume set.

Download or read book Frontiers in Offshore Geotechnics II written by Susan Gourvenec and published by CRC Press. This book was released on 2010-10-04 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Offshore Geotechnics II comprises the Proceedings of the Second International Symposium on Frontiers in Offshore Geotechnics (ISFOG), organised by the Centre for Offshore Foundation Systems (COFS) and held at the University of Western Australia (UWA), Perth from 8 10 November 2010. The volume addresses current and emerging challenges

Download or read book Soil Mechanics Photoelastic Stress Analysis written by Florence Evelyn Harden Cozzi and published by . This book was released on 1953 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydraulic and Civil Engineering Technology VIII written by M. Yang and published by IOS Press. This book was released on 2023-12-21 with total page 1528 pages. Available in PDF, EPUB and Kindle. Book excerpt: All of us are dependent on a built environment constructed and maintained by civil and hydraulic engineers, and for those working in these fields, keeping up to date with the latest technological developments is vital for the safe and efficient design and operation of this infrastructure. This book presents the proceedings of HCET 2023, the 8th International Technical Conference on Frontiers of Hydraulic and Civil Engineering Technology, held from 25-27 September 2023 in Wuhan, China. HCET is an international conference which aims to enhance the development of hydraulic and civil engineering in China, with a focus on high-end, intelligent and green technologies. It seeks to do this by consolidating global wisdom and achievements and providing scientific support. HCET also offers an excellent opportunity for scientists, researchers and engineers from around the world to exchange their findings and discuss developments, establishing a basis for national and international collaboration. A total of 316 contributions were received for the 2023 edition, of which 187 were ultimately accepted after a rigorous review process and checks for quality and plagiarism. Topics covered include the research and development of concrete structure design and analysis; structural mechanics and structural engineering; building and future materials; hydraulic engineering; geological exploration and earthquake engineering; building technology; urban planning; road, bridge and traffic engineering; energy infrastructure; environmental engineering and advanced engineering technologies, and interdisciplinary sciences and applications. Covering a wide range of subjects related to hydraulic engineering and civil engineering technology and associated transdisciplinary sciences, the book will be of interest to all those working in the field.