Download or read book Development of a Robotic Mobile Mapping System by Vision aided Inertial Navigation written by Fadi Atef Bayoud and published by . This book was released on 2006 with total page 157 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Intelligent Robotics and Applications written by Haibin Yu and published by Springer. This book was released on 2019-08-01 with total page 743 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume set LNAI 11740 until LNAI 11745 constitutes the proceedings of the 12th International Conference on Intelligent Robotics and Applications, ICIRA 2019, held in Shenyang, China, in August 2019. The total of 378 full and 25 short papers presented in these proceedings was carefully reviewed and selected from 522 submissions. The papers are organized in topical sections as follows: Part I: collective and social robots; human biomechanics and human-centered robotics; robotics for cell manipulation and characterization; field robots; compliant mechanisms; robotic grasping and manipulation with incomplete information and strong disturbance; human-centered robotics; development of high-performance joint drive for robots; modular robots and other mechatronic systems; compliant manipulation learning and control for lightweight robot. Part II: power-assisted system and control; bio-inspired wall climbing robot; underwater acoustic and optical signal processing for environmental cognition; piezoelectric actuators and micro-nano manipulations; robot vision and scene understanding; visual and motional learning in robotics; signal processing and underwater bionic robots; soft locomotion robot; teleoperation robot; autonomous control of unmanned aircraft systems. Part III: marine bio-inspired robotics and soft robotics: materials, mechanisms, modelling, and control; robot intelligence technologies and system integration; continuum mechanisms and robots; unmanned underwater vehicles; intelligent robots for environment detection or fine manipulation; parallel robotics; human-robot collaboration; swarm intelligence and multi-robot cooperation; adaptive and learning control system; wearable and assistive devices and robots for healthcare; nonlinear systems and control. Part IV: swarm intelligence unmanned system; computational intelligence inspired robot navigation and SLAM; fuzzy modelling for automation, control, and robotics; development of ultra-thin-film, flexible sensors, and tactile sensation; robotic technology for deep space exploration; wearable sensing based limb motor function rehabilitation; pattern recognition and machine learning; navigation/localization. Part V: robot legged locomotion; advanced measurement and machine vision system; man-machine interactions; fault detection, testing and diagnosis; estimation and identification; mobile robots and intelligent autonomous systems; robotic vision, recognition and reconstruction; robot mechanism and design. Part VI: robot motion analysis and planning; robot design, development and control; medical robot; robot intelligence, learning and linguistics; motion control; computer integrated manufacturing; robot cooperation; virtual and augmented reality; education in mechatronics engineering; robotic drilling and sampling technology; automotive systems; mechatronics in energy systems; human-robot interaction.

Download or read book Graduate Programs in Engineering Applied Sciences 2011 Grad 5 written by Peterson's and published by Peterson's. This book was released on 2011-05-01 with total page 2072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Peterson's Graduate Programs in Engineering & Applied Sciences contains a wealth of information on colleges and universities that offer graduate degrees in the fields of Aerospace/Aeronautical Engineering; Agricultural Engineering & Bioengineering; Architectural Engineering, Biomedical Engineering & Biotechnology; Chemical Engineering; Civil & Environmental Engineering; Computer Science & Information Technology; Electrical & Computer Engineering; Energy & Power engineering; Engineering Design; Engineering Physics; Geological, Mineral/Mining, and Petroleum Engineering; Industrial Engineering; Management of Engineering & Technology; Materials Sciences & Engineering; Mechanical Engineering & Mechanics; Ocean Engineering; Paper & Textile Engineering; and Telecommunications. Up-to-date data, collected through Peterson's Annual Survey of Graduate and Professional Institutions, provides valuable information on degree offerings, professional accreditation, jointly offered degrees, part-time and evening/weekend programs, postbaccalaureate distance degrees, faculty, students, degree requirements, entrance requirements, expenses, financial support, faculty research, and unit head and application contact information. As an added bonus, readers will find a helpful "See Close-Up" link to in-depth program descriptions written by some of these institutions. These Close-Ups offer detailed information about the specific program or department, faculty members and their research, and links to the program Web site. In addition, there are valuable articles on financial assistance and support at the graduate level and the graduate admissions process, with special advice for international and minority students. Another article discusses important facts about accreditation and provides a current list of accrediting agencies.

Download or read book Progress in Sustainable Aviation written by T. Hikmet Karakoc and published by Springer Nature. This book was released on 2022-11-25 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Progress in Sustainable Aviation looks at recent progress and new technological developments in sustainable aviation, presenting readers with engineering solutions and methodologies for efficiency and cost savings, performance improvement, and emission reduction. Coverage includes alternative fuel types, propulsion technologies, and emission technologies used in different aerial vehicles, such as unmanned aerial vehicles, drones, and passenger aircraft. Operational areas, such as the building of green airports, commercial air transport, and maintenance management are also addressed. This collection will be a valuable reference for researchers, practicing engineers, scientists, and students working in the area of sustainable aviation technology and management. Looks at recent progress in sustainable aviation technologies; Presents alternative aviation fuel types and propulsion technologies; Includes case studies and practical applications.

Download or read book Safe Robot Navigation Among Moving and Steady Obstacles written by Andrey V. Savkin and published by Butterworth-Heinemann. This book was released on 2015-09-25 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safe Robot Navigation Among Moving and Steady Obstacles is the first book to focus on reactive navigation algorithms in unknown dynamic environments with moving and steady obstacles. The first three chapters provide introduction and background on sliding mode control theory, sensor models, and vehicle kinematics. Chapter 4 deals with the problem of optimal navigation in the presence of obstacles. Chapter 5 discusses the problem of reactively navigating. In Chapter 6, border patrolling algorithms are applied to a more general problem of reactively navigating. A method for guidance of a Dubins-like mobile robot is presented in Chapter 7. Chapter 8 introduces and studies a simple biologically-inspired strategy for navigation a Dubins-car. Chapter 9 deals with a hard scenario where the environment of operation is cluttered with obstacles that may undergo arbitrary motions, including rotations and deformations. Chapter 10 presents a novel reactive algorithm for collision free navigation of a nonholonomic robot in unknown complex dynamic environments with moving obstacles. Chapter 11 introduces and examines a novel purely reactive algorithm to navigate a planar mobile robot in densely cluttered environments with unpredictably moving and deforming obstacles. Chapter 12 considers a multiple robot scenario. For the Control and Automation Engineer, this book offers accessible and precise development of important mathematical models and results. All the presented results have mathematically rigorous proofs. On the other hand, the Engineer in Industry can benefit by the experiments with real robots such as Pioneer robots, autonomous wheelchairs and autonomous mobile hospital. - First book on collision free reactive robot navigation in unknown dynamic environments - Bridges the gap between mathematical model and practical algorithms - Presents implementable and computationally efficient algorithms of robot navigation - Includes mathematically rigorous proofs of their convergence - A detailed review of existing reactive navigation algorithm for obstacle avoidance - Describes fundamentals of sliding mode control

Download or read book Aided Navigation GPS with High Rate Sensors written by Jay A. Farrell and published by McGraw Hill Professional. This book was released on 2008-04-03 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design Cutting-Edge Aided Navigation Systems for Advanced Commercial & Military Applications Aided Navigation is a design-oriented textbook and guide to building aided navigation systems for smart cars, precision farming vehicles, smart weapons, unmanned aircraft, mobile robots, and other advanced applications. The navigation guide contains two parts explaining the essential theory, concepts, and tools, as well as the methodology in aided navigation case studies with sufficient detail to serve as the basis for application-oriented analysis and design. Filled with detailed illustrations and examples, this expert design tool takes you step-by-step through coordinate systems, deterministic and stochastic modeling, optimal estimation, and navigation system design. Authoritative and comprehensive, Aided Navigation features: End-of-chapter exercises throughout Part I In-depth case studies of aided navigation systems Numerous Matlab-based examples Appendices define notation, review linear algebra, and discuss GPS receiver interfacing Source code and sensor data to support examples is available through the publisher-supported website Inside this Complete Guide to Designing Aided Navigation Systems • Aided Navigation Theory: Introduction to Aided Navigation • Coordinate Systems • Deterministic Modeling • Stochastic Modeling • Optimal Estimation • Navigation System Design • Navigation Case Studies: Global Positioning System (GPS) • GPS-Aided Encoder • Attitude and Heading Reference System • GPS-Aided Inertial Navigation System (INS) • Acoustic Ranging and Doppler-Aided INS

Download or read book Distributed Autonomous Robotic Systems 4 written by L.E. Parker and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fifth International Symposium on Distributed Autonomous Robotic Systems (DARS 2000) dealt with new strategies to realize complex, modular, robust, and fault-tolerant robotic systems. Technologies, algorithms, and system architectures for distributed autonomous robotic systems were presented and discussed during the meeting. DARS 2000 was truly an international event, with participants represent ing eleven countries from Europe, Asia, and the Americas. All of the papers in this volume were presented at DARS 2000, and were selected on the basis of peer re views to ensure quality and relevance. These papers have the common goal of con tributing solutions to realize robust and intelligent multirobot systems. The topics of the symposium address a wide range of issues that are important in the development of decentralized robotic systems. These topics include architec tures, communication, biological inspirations, reconfigurable robots, localization, exploration and mapping, distributed sensing, multi robot motion coordination, tar get assignment and tracking, multirobot learning, and cooperative object transport. DARS clearly requires a broad area of interdisciplinary technologies related not only to robotics and computer engineering, but also to biology and psychology. The DARS symposium is the leading established conference on distributed au tonomous systems. The First, Second, and Third International Symposia on Distrib uted Autonomous Robotic Systems (DARS '92, DARS '94, and DARS '96) were held at the Institute of Physical and Chemical Research (RIKEN), Saitama, Japan.

Download or read book Fundamentals of High Accuracy Inertial Navigation written by Averil Burton Chatfield and published by AIAA. This book was released on 1997 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robotics Research written by Cédric Pradalier and published by Springer Science & Business Media. This book was released on 2011-05-02 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of papers presented at the 14th International Symposium of Robotic Research (ISRR). ISRR is the biennial meeting of the International Foundation of Robotic Research (IFRR) and its 14th edition took place in Lucerne, Switzerland, from August 31st to September 3rd, 2009. As for the previous symposia, ISRR 2009 followed up on the successful concept of a mixture of invited contributions and open submissions. Half of the 48 presentations were therefore invited contributions from outstanding researchers selected by the IFRR officers, and half were chosen among the 66 submissions after peer review. This selection process resulted in a truly excellent technical program which, we believe, featured some of the very best of robotic research. Out of the 48 presentations, the 42 papers which were finally submitted for publication are organized in 8 sections that encompass the major research orientations in robotics: Navigation, Control & Planning, Human-Robot Interaction, Manipulation and Humanoids, Learning, Mapping, Multi-Robot Systems, and Micro-Robotics. They represent an excellent snapshot of cutting-edge research in robotics and outline future directions.

Download or read book Mobile Robotics written by Alonzo Kelly and published by Cambridge University Press. This book was released on 2013-11-11 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction -- Math fundamentals -- Numerical methods -- Dynamics -- Optimal estimation -- State estimation -- Control -- Perception -- Localization and mapping -- Motion planning

Download or read book Prototyping of Robotic Systems Applications of Design and Implementation written by Sobh, Tarek and published by IGI Global. This book was released on 2012-02-29 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: As a segment of the broader science of automation, robotics has achieved tremendous progress in recent decades due to the advances in supporting technologies such as computers, control systems, cameras and electronic vision, as well as micro and nanotechnology. Prototyping a design helps in determining system parameters, ranges, and in structuring an overall better system. Robotics is one of the industrial design fields in which prototyping is crucial for improved functionality. Prototyping of Robotic Systems: Applications of Design and Implementation provides a framework for conceptual, theoretical, and applied research in robotic prototyping and its applications. Covering the prototyping of various robotic systems including the complicated industrial robots, the tiny and delicate nanorobots, medical robots for disease diagnosis and treatment, as well as the simple robots for educational purposes, this book is a useful tool for those in the field of robotics prototyping and as a general reference tool for those in related fields.

Download or read book IEEE Plans 90 Position Location and Navigation Symposium Record written by and published by . This book was released on 1990 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Creating Autonomous Vehicle Systems written by Shaoshan Liu and published by Morgan & Claypool Publishers. This book was released on 2017-10-25 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first technical overview of autonomous vehicles written for a general computing and engineering audience. The authors share their practical experiences of creating autonomous vehicle systems. These systems are complex, consisting of three major subsystems: (1) algorithms for localization, perception, and planning and control; (2) client systems, such as the robotics operating system and hardware platform; and (3) the cloud platform, which includes data storage, simulation, high-definition (HD) mapping, and deep learning model training. The algorithm subsystem extracts meaningful information from sensor raw data to understand its environment and make decisions about its actions. The client subsystem integrates these algorithms to meet real-time and reliability requirements. The cloud platform provides offline computing and storage capabilities for autonomous vehicles. Using the cloud platform, we are able to test new algorithms and update the HD map—plus, train better recognition, tracking, and decision models. This book consists of nine chapters. Chapter 1 provides an overview of autonomous vehicle systems; Chapter 2 focuses on localization technologies; Chapter 3 discusses traditional techniques used for perception; Chapter 4 discusses deep learning based techniques for perception; Chapter 5 introduces the planning and control sub-system, especially prediction and routing technologies; Chapter 6 focuses on motion planning and feedback control of the planning and control subsystem; Chapter 7 introduces reinforcement learning-based planning and control; Chapter 8 delves into the details of client systems design; and Chapter 9 provides the details of cloud platforms for autonomous driving. This book should be useful to students, researchers, and practitioners alike. Whether you are an undergraduate or a graduate student interested in autonomous driving, you will find herein a comprehensive overview of the whole autonomous vehicle technology stack. If you are an autonomous driving practitioner, the many practical techniques introduced in this book will be of interest to you. Researchers will also find plenty of references for an effective, deeper exploration of the various technologies.

Download or read book IEEE PLANS written by and published by . This book was released on 1990 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Autonomous Mobile Robots second edition written by Roland Siegwart and published by MIT Press. This book was released on 2011-02-18 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a comprehensive introduction to all aspects of mobile robotics, from algorithms to mechanisms. Mobile robots range from the Mars Pathfinder mission's teleoperated Sojourner to the cleaning robots in the Paris Metro. This text offers students and other interested readers an introduction to the fundamentals of mobile robotics, spanning the mechanical, motor, sensory, perceptual, and cognitive layers the field comprises. The text focuses on mobility itself, offering an overview of the mechanisms that allow a mobile robot to move through a real world environment to perform its tasks, including locomotion, sensing, localization, and motion planning. It synthesizes material from such fields as kinematics, control theory, signal analysis, computer vision, information theory, artificial intelligence, and probability theory. The book presents the techniques and technology that enable mobility in a series of interacting modules. Each chapter treats a different aspect of mobility, as the book moves from low-level to high-level details. It covers all aspects of mobile robotics, including software and hardware design considerations, related technologies, and algorithmic techniques. This second edition has been revised and updated throughout, with 130 pages of new material on such topics as locomotion, perception, localization, and planning and navigation. Problem sets have been added at the end of each chapter. Bringing together all aspects of mobile robotics into one volume, Introduction to Autonomous Mobile Robots can serve as a textbook or a working tool for beginning practitioners. Curriculum developed by Dr. Robert King, Colorado School of Mines, and Dr. James Conrad, University of North Carolina-Charlotte, to accompany the National Instruments LabVIEW Robotics Starter Kit, are available. Included are 13 (6 by Dr. King and 7 by Dr. Conrad) laboratory exercises for using the LabVIEW Robotics Starter Kit to teach mobile robotics concepts.

Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Adaptive Mobile Robotics written by Abul K. M. Azad and published by World Scientific. This book was released on 2012 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides state-of-the-art scientific and engineering research findings and developments in the area of mobile robotics and associated support technologies. The book contains peer reviewed articles presented at the CLAWAR 2012 conference. Robots are no longer confined to industrial and manufacturing environments. A great deal of interest is invested in the use of robots outside the factory environment. The CLAWAR conference series, established as a high profile international event, acts as a platform for dissemination of research and development findings and supports such a trend to address the current interest in mobile robotics to meet the needs of mankind in various sectors of the society. These include personal care, public health, services in the domestic, public and industrial environments. The editors of the book have extensive research experience and publications in the area of robotics in general and in mobile robotics specifically, and their experience is reflected in editing the contents of the book.