Download or read book Development of a Model Optimizing the Reuse of Building Demolition Waste and Reducing the Environmental Impact of this Waste Research Report Vol 1 Summary Recommendations Comments and Conclusions written by Commission of the european communities.. Directorate general for science research and development and published by . This book was released on 1994 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Management Recycling and Reuse of Waste Composites written by Vannessa Goodship and published by Elsevier. This book was released on 2009-12-18 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative reference work provides a comprehensive review of the management, recycling and reuse of waste composites. These are issues which are of increasing importance due to the growing use of composites in many industries, increasingly strict legislation and concerns about disposal of composites by landfill or incineration.Part one discusses the management of waste composites and includes an introduction to composites recycling and a chapter on EU legislation for recycling waste composites. Part two reviews thermal technologies for recycling waste composites with chapters on pyrolysis, catalytic transformation, thermal treatments for energy recovery and fluidized bed pyrolysis. Part three covers mechanical methods of recycling waste composites. This section includes chapters on additives for recycled plastic composites, improving mechanical recycling and the quality and durability of mechanically recycled composites. Parts four discusses improving sustainable manufacture of composites, with chapters on environmentally-friendly filament winding of FRP composites, process monitoring and new developments in producing more functional and sustainable composites. Part five gives a review of case studies including end-of-life wind turbine blades, aerospace composites, marine composites, composites in construction and the recycling of concrete.With its distinguished editor and international team of contributors, Management, recycling and reuse of waste composites is a standard reference for anyone involved in the disposal or recycling of waste composites. - Reviews the increasingly important issues of recycling and reuse as a result of the increased use of composites - Discusses the management of waste composites and EU legislation with regards to recycling - Examines methods for recycling, including thermal technologies and mechanical methods
Download or read book Motivating Change Sustainable Design and Behaviour in the Built Environment written by Robert Crocker and published by Routledge. This book was released on 2013-07-24 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s most pressing challenges require behaviour change at many levels, from the city to the individual. This book focuses on the collective influences that can be seen to shape change. Exploring the underlying dimensions of behaviour change in terms of consumption, media, social innovation and urban systems, the essays in this book are from many disciplines, including architecture, urban design, industrial design and engineering, sociology, psychology, cultural studies, waste management and public policy. Aimed especially at designers and architects, Motivating Change explores the diversity of current approaches to change, and the multiple ways in which behaviour can be understood as an enactment of values and beliefs, standards and habitual practices in daily life, and more broadly in the urban environment.
Download or read book Circular Economy in the Construction Industry written by Sadhan Kumar Ghosh and published by CRC Press. This book was released on 2021-12-22 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circular Economy in the Construction Industry is an invaluable resource for researchers, policymakers, implementers and PhD and Masters-level students in universities analyzing the present status of Construction and Demolition Wastes (C&DW) management, materials development utilizing slag, fly ash, HDPE fibre, geo-wastes, and other wastes, green concrete, soil stabilization, resource circulation in construction sectors, success in experimentation & commercial production, future needs, and future research areas. While huge C&DW is wasted by dumping, there is potential of recycling preventing greenhouse gas (GHG) emissions and environmental pollution as well as creating business opportunities. Circularity of resources in the construction industry can contribute to a more secure, sustainable, and economically sound future through proper policy instruments, management systems, and recycling by selecting the following: Supply chain sustainability and collection of C&D Wastes, Appropriate separation and recycling technology, Enforcement of policy instruments, Productivity, quality control of recycled products and intended end use, Economic feasibility as business case, commercialization, generating employment. This book addresses most of the above issues in a lucid manner by experts in the field from different countries, which are helpful for the related stakeholders, edited by experts in the field.
Download or read book Advances in Construction and Demolition Waste Recycling written by F. Pacheco-Torgal and published by Woodhead Publishing. This book was released on 2020-02-10 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment is divided over three parts. Part One focuses on the management of construction and demolition waste, including estimation of quantities and the use of BIM and GIS tools. Part Two reviews the processing of recycled aggregates, along with the performance of concrete mixtures using different types of recycled aggregates. Part Three looks at the environmental assessment of non-hazardous waste. This book will be a standard reference for civil engineers, structural engineers, architects and academic researchers working in the field of construction and demolition waste. - Summarizes key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, and the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste
Download or read book Sustainability and Automation in Smart Constructions written by Hugo Rodrigues and published by Springer Nature. This book was released on 2020-09-14 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers outstanding papers presented at the Conference on Automation Innovation in Construction (CIAC-2019). In recent years, there have been significant transformations in the construction sector regarding production and the use of computers and automation to create smart and autonomous systems. At the same time, innovative construction materials and alternative technologies are crucial to overcoming the challenges currently facing the building materials industry. The book presents numerous examples of smart construction technologies, discusses the applications of new construction materials and technologies, and includes studies on recent trends in automation as applied to the construction sector.
Download or read book Waste Management and Minimization written by Stephen R. Smith and published by EOLSS Publications. This book was released on 2009-09-17 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste Management and Minimization theme is a component of Encyclopedia of Environmental and Ecological Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The book on Waste Management and Minimization contains contributions from distinguished experts in the field, discusses waste treatment, management and minimization. This volume is aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1983 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book What a Waste 2 0 written by Silpa Kaza and published by World Bank Publications. This book was released on 2018-12-06 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid waste management affects every person in the world. By 2050, the world is expected to increase waste generation by 70 percent, from 2.01 billion tonnes of waste in 2016 to 3.40 billion tonnes of waste annually. Individuals and governments make decisions about consumption and waste management that affect the daily health, productivity, and cleanliness of communities. Poorly managed waste is contaminating the world’s oceans, clogging drains and causing flooding, transmitting diseases, increasing respiratory problems, harming animals that consume waste unknowingly, and affecting economic development. Unmanaged and improperly managed waste from decades of economic growth requires urgent action at all levels of society. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 aggregates extensive solid aste data at the national and urban levels. It estimates and projects waste generation to 2030 and 2050. Beyond the core data metrics from waste generation to disposal, the report provides information on waste management costs, revenues, and tariffs; special wastes; regulations; public communication; administrative and operational models; and the informal sector. Solid waste management accounts for approximately 20 percent of municipal budgets in low-income countries and 10 percent of municipal budgets in middle-income countries, on average. Waste management is often under the jurisdiction of local authorities facing competing priorities and limited resources and capacities in planning, contract management, and operational monitoring. These factors make sustainable waste management a complicated proposition; most low- and middle-income countries, and their respective cities, are struggling to address these challenges. Waste management data are critical to creating policy and planning for local contexts. Understanding how much waste is generated—especially with rapid urbanization and population growth—as well as the types of waste generated helps local governments to select appropriate management methods and plan for future demand. It allows governments to design a system with a suitable number of vehicles, establish efficient routes, set targets for diversion of waste, track progress, and adapt as consumption patterns change. With accurate data, governments can realistically allocate resources, assess relevant technologies, and consider strategic partners for service provision, such as the private sector or nongovernmental organizations. What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050 provides the most up-to-date information available to empower citizens and governments around the world to effectively address the pressing global crisis of waste. Additional information is available at http://www.worldbank.org/what-a-waste.
Download or read book Designing Sustainable Technologies Products and Policies written by Enrico Benetto and published by Springer. This book was released on 2018-07-03 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book provides insight into the implementation of Life Cycle approaches along the entire business value chain, supporting environmental, social and economic sustainability related to the development of industrial technologies, products, services and policies; and the development and management of smart agricultural systems, smart mobility systems, urban infrastructures and energy for the built environment. The book is based on papers presented at the 8th International Life Cycle Management Conference that took place from September 3-6, 2017 in Luxembourg, and which was organized by the Luxembourg Institute of Science and Technology (LIST) and the University of Luxembourg in the framework of the LCM Conference Series.
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1976 with total page 976 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Construction and Demolition Waste Management in Australia written by Salman Shooshtarian and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Due to the increase in construction activities worldwide and in Australia, the generation rate of construction and demolition (C&D) waste has significantly grown in recent years. In Australia, construction projects (i.e. housing, buildings and transport infrastructure) are being delivered at an unprecedented rate. Between 2009 and 2019, the annual average growth rate in this industry was 3.33%. The industry is identified as the fourth largest contributor to Australia's growth domestic product (GDP). Unsurprisingly, this quantity of construction brings about a considerable quantity of waste. In 2019, the construction industry generated 27 million tons (or megatonnes) of waste from construction and demolition activities in Australia. Given the size of the construction market and waste generated in this industry, any change will create huge impacts. The adequate management of such a quantity has now become a priority for policymakers around the world. A holistic national approach is required to handle the growing issue of C&D waste management in Australia. Therefore, this book identifies discrepancies and inconsistencies related to C&D waste management in different Australian jurisdictions. The included chapters discuss regulations governing the C&D waste stream, discrepancies in defining waste, Australia's place in the worldwide C&D waste market, opportunities for reducing C&D waste, and the perception among C&D waste stakeholders on relevant issues and proposed reforms, among other topics. Overall, the book contributes to the Australian understanding of effective management of C&D waste by providing a clear picture of C&D waste state of play. The book can benefit policymakers and whoever is interested in C&D waste to better plan for innovative and efficient C&D waste resulting in the further diversion of C&D waste from landfills"--
Download or read book The Impact of School Infrastructure on Learning written by Peter Barrett and published by World Bank Publications. This book was released on 2019-02-04 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'The Impact of School Infrastructure on Learning: A Synthesis of the Evidence provides an excellent literature review of the resources that explore the areas of focus for improved student learning, particularly the aspiration for “accessible, well-built, child-centered, synergetic and fully realized learning environments.†? Written in a style which is both clear and accessible, it is a practical reference for senior government officials and professionals involved in the planning and design of educational facilities, as well as for educators and school leaders. --Yuri Belfali, Head of Division, Early Childhood and Schools, OECD Directorate for Education and Skills This is an important and welcome addition to the surprisingly small, evidence base on the impacts of school infrastructure given the capital investment involved. It will provide policy makers, practitioners, and those who are about to commission a new build with an important and comprehensive point of reference. The emphasis on safe and healthy spaces for teaching and learning is particularly welcome. --Harry Daniels, Professor of Education, Department of Education, Oxford University, UK This report offers a useful library of recent research to support the, connection between facility quality and student outcomes. At the same time, it also points to the unmet need for research to provide verifiable and reliable information on this connection. With such evidence, decisionmakers will be better positioned to accurately balance the allocation of limited resources among the multiple competing dimensions of school policy, including the construction and maintenance of the school facility. --David Lever, K-12 Facility Planner, Former Executive Director of the Interagency Committee on School Construction, Maryland Many planners and designers are seeking a succinct body of research defining both the issues surrounding the global planning of facilities as well as the educational outcomes based on the quality of the space provided. The authors have finally brought that body of evidence together in this well-structured report. The case for better educational facilities is clearly defined and resources are succinctly identified to stimulate the dialogue to come. We should all join this conversation to further the process of globally enhancing learning-environment quality! --David Schrader, AIA, Educational Facility Planner and Designer, Former Chairman of the Board of Directors, Association for Learning Environments (A4LE)
Download or read book Practical Handbook of Material Flow Analysis written by Paul H. Brunner and published by CRC Press. This book was released on 2016-04-19 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first-ever book on this subject establishes a rigid, transparent and useful methodology for investigating the material metabolism of anthropogenic systems. Using Material Flow Analysis (MFA), the main sources, flows, stocks, and emissions of man-made and natural materials can be determined. By demonstrating the application of MFA, this book reveals how resources can be conserved and the environment protected within complex systems. The fourteen case studies presented exemplify the potential for MFA to contribute to sustainable materials management. Exercises throughout the book deepen comprehension and expertise. The authors have had success in applying MFA to various fields, and now promote the use of MFA so that future engineers and planners have a common method for solving resource-oriented problems.
Download or read book Guide for the Care and Use of Laboratory Animals written by National Research Council and published by National Academies Press. This book was released on 2011-01-27 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: A respected resource for decades, the Guide for the Care and Use of Laboratory Animals has been updated by a committee of experts, taking into consideration input from the scientific and laboratory animal communities and the public at large. The Guide incorporates new scientific information on common laboratory animals, including aquatic species, and includes extensive references. It is organized around major components of animal use: Key concepts of animal care and use. The Guide sets the framework for the humane care and use of laboratory animals. Animal care and use program. The Guide discusses the concept of a broad Program of Animal Care and Use, including roles and responsibilities of the Institutional Official, Attending Veterinarian and the Institutional Animal Care and Use Committee. Animal environment, husbandry, and management. A chapter on this topic is now divided into sections on terrestrial and aquatic animals and provides recommendations for housing and environment, husbandry, behavioral and population management, and more. Veterinary care. The Guide discusses veterinary care and the responsibilities of the Attending Veterinarian. It includes recommendations on animal procurement and transportation, preventive medicine (including animal biosecurity), and clinical care and management. The Guide addresses distress and pain recognition and relief, and issues surrounding euthanasia. Physical plant. The Guide identifies design issues, providing construction guidelines for functional areas; considerations such as drainage, vibration and noise control, and environmental monitoring; and specialized facilities for animal housing and research needs. The Guide for the Care and Use of Laboratory Animals provides a framework for the judgments required in the management of animal facilities. This updated and expanded resource of proven value will be important to scientists and researchers, veterinarians, animal care personnel, facilities managers, institutional administrators, policy makers involved in research issues, and animal welfare advocates.
Download or read book Sustainable Manufacturing and Design written by Kaushik Kumar and published by Woodhead Publishing. This book was released on 2021-01-08 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Manufacturing and Design draws together research and practices from a wide range of disciplines to help engineers design more environmentally sustainable products. Sustainable manufacturing requires that the entire manufacturing enterprise adopts sustainability goals at a system-level in decision-making, hence the scope of this book covers a wide range of viewpoints in response. Advice on recyclability, zero landfill design, sustainable quality systems, and product take-back issues make this a highly usable guide to the challenges facing engineering designers today. Contributions from around the globe are included, helping to form an international view of an issue that requires a global response. - Addresses methods to reduce energy and material waste through manufacturing design - Helps to troubleshoot manufacturability problems that can arise in sustainable design - Includes coverage of the legislative, cultural and social impacts of sustainable manufacturing, promoting a holistic view of the subject
Download or read book Analysis of Nordic regulatory framework and its effect on waste prevention and recycling in the region written by Papineschi, Joe and published by Nordic Council of Ministers. This book was released on 2019-04-23 with total page 196 pages. Available in PDF, EPUB and Kindle. Book excerpt: At an important time in Nordic Waste Policy, as the 2018 Circular Economy Package makes significant updates to key European Union directives, this work looks back at the Nordic regulatory framework for waste from the 1970s and its effect upon waste prevention and recycling.At an important time in Nordic Waste Policy, as the 2018 Circular Economy Package makes significant updates to key European Union directives, this work looks back at the Nordic regulatory framework for waste from the 1970s and its effect upon waste prevention and recycling.
