Download or read book Introduction to Development Engineering written by Temina Madon and published by Springer Nature. This book was released on 2022-09-08 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access textbook introduces the emerging field of Development Engineering and its constituent theories, methods, and applications. It is both a teaching text for students and a resource for researchers and practitioners engaged in the design and scaling of technologies for low-resource communities. The scope is broad, ranging from the development of mobile applications for low-literacy users to hardware and software solutions for providing electricity and water in remote settings. It is also highly interdisciplinary, drawing on methods and theory from the social sciences as well as engineering and the natural sciences. The opening section reviews the history of “technology-for-development” research, and presents a framework that formalizes this body of work and begins its transformation into an academic discipline. It identifies common challenges in development and explains the book’s iterative approach of “innovation, implementation, evaluation, adaptation.” Each of the next six thematic sections focuses on a different sector: energy and environment; market performance; education and labor; water, sanitation and health; digital governance; and connectivity. These thematic sections contain case studies from landmark research that directly integrates engineering innovation with technically rigorous methods from the social sciences. Each case study describes the design, evaluation, and/or scaling of a technology in the field and follows a single form, with common elements and discussion questions, to create continuity and pedagogical consistency. Together, they highlight successful solutions to development challenges, while also analyzing the rarely discussed failures. The book concludes by reiterating the core principles of development engineering illustrated in the case studies, highlighting common challenges that engineers and scientists will face in designing technology interventions that sustainably accelerate economic development. Development Engineering provides, for the first time, a coherent intellectual framework for attacking the challenges of poverty and global climate change through the design of better technologies. It offers the rigorous discipline needed to channel the energy of a new generation of scientists and engineers toward advancing social justice and improved living conditions in low-resource communities around the world.

Download or read book Systems Design and Engineering written by G. Maarten Bonnema and published by CRC Press. This book was released on 2016-01-05 with total page 113 pages. Available in PDF, EPUB and Kindle. Book excerpt: As its name implies, the aim of Systems Design and Engineering: Facilitating Multidisciplinary Development Projects is to help systems engineers develop the skills and thought processes needed to successfully develop and implement engineered systems. Such expertise typically does not come through study but from action, hard work, and cooperation. To that end, the authors have chosen a "hands-on" approach for presenting material rather than concentrating on theory, as so often is the case in a classroom setting. This attractive and accessible text is a mix of theory and practical approach, illustrated with examples that have enough richness and variability to hold your attention. Models are presented for controlling the design, change, and engineering processes. Various aspects of systems engineering and methods providing the big picture at system level are discussed. In some ways, you can think of the book as a compact "starter’s kit" for systems engineers. Although the authors are recognized experts in academic settings, they attribute much of their success in systems engineering to their own hands-on experiences and want to show you how to achieve that same level of expertise. Simply reading this book or any other book will not suffice for the learning process to become a systems engineer - no book will do that. However, by following the principles laid out in this book, you can develop the necessary skills and expertise to help you start an interesting, challenging, and rewarding career as a systems engineer.

Download or read book Engineering and Product Development Management written by Stephen Armstrong and published by Cambridge University Press. This book was released on 2001-09-24 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering and Product Development Management is a practical guide to the components of engineering management, using a holistic approach. It will help engineers and managers understand what they have to do to improve the product development process by deploying new technology and new methods of working in concurrent teams. The book takes elements from six well known and understood bodies of knowledge and integrates them into a holistic approach: integrated product development, project management, process management, systems engineering, product data management, and organizational change management. These elements are framed within an overall enterprise-wide architecture. The techniques discussed in this book work for both huge multinational organizations and smaller enterprises. The emphasis throughout is on practical tools which will be invaluable for engineers, managers, and consultants responsible for project and product development.

Download or read book Rapid Prototyping and Engineering Applications written by Frank W. Liou and published by CRC Press. This book was released on 2007-09-26 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: More quality, more flexibility, and less costs seem to be the key to meeting the demands of the global marketplace. The secret to success in this arena lies in the expert execution of the critical tasks in the product definition stage. Prototyping is an essential part of this stage, yet can be very expensive. It must be planned well and use state-o

Download or read book Engineering and Sustainable Community Development written by Juan Lucena and published by Morgan & Claypool Publishers. This book was released on 2010-10-10 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, Engineering and Sustainable Community Development, presents an overview of engineering as it relates to humanitarian engineering, service learning engineering, or engineering for community development, often called sustainable community development (SCD). The topics covered include a history of engineers and development, the problems of using industry-based practices when designing for communities, how engineers can prepare to work with communities, and listening in community development. It also includes two case studies -- one of engineers developing a windmill for a community in India, and a second of an engineer "mapping communities" in Honduras to empower people to use water effectively -- and student perspectives and experiences on one curricular model dealing with community development. Table of Contents: Introduction / Engineers and Development: From Empires to Sustainable Development / Why Design for Industry Will Not Work as Design for Community / Engineering with Community / Listening to Community / ESCD Case Study 1: Sika Dhari's Windmill / ESCD Case Study 2: Building Organizations and Mapping Communities in Honduras / Students' Perspectives on ESCD: A Course Model / Beyond Engineers and Community: A Path Forward

Download or read book Airport Engineering written by Norman J. Ashford and published by John Wiley & Sons. This book was released on 2011-04-06 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1979, Airport Engineering by Ashford and Wright, has become a classic textbook in the education of airport engineers and transportation planners. Over the past twenty years, construction of new airports in the US has waned as construction abroad boomed. This new edition of Airport Engineering will respond to this shift in the growth of airports globally, with a focus on the role of the International Civil Aviation Organization (ICAO), while still providing the best practices and tested fundamentals that have made the book successful for over 30 years.

Download or read book Development Engineering written by William Kisaalita and published by Cambridge Scholars Publishing. This book was released on 2020-08-28 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the development and evaluation of technological interventions designed to improve human and economic development within complex, low-resource settings, showing that a solution becomes an innovation when it reaches widespread use. The book shortens the time-gap between development and up-take of the intervention, especially for student solution-developers or innovators who are new to the cultural and geopolitical settings of the problem-source country or region. Technological interventions in development are sustainable if they meet a real need, are affordable by the users, fit within the cultural context and are ergonomically appropriate. Many interventions have failed because of inattentiveness to one or more of these factors. Each of the book’s points is backed up with scholarly research work, confidently guiding solution-developers confronted with issues such as acquiring intellectual property protections, among many others.

Download or read book Usability Engineering written by Mary Beth Rosson and published by Morgan Kaufmann. This book was released on 2002 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Usability engineering is about designing products that are easy to use. This text provides an introduction to human computer interaction principles, and how to apply them in ways that make software and hardware more effective and easier to use.

Download or read book Simultaneous Engineering for New Product Development written by Jack Ribbens and published by John Wiley & Sons. This book was released on 2000-02-14 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das Konzept des Simultaneous Engineering (SE) besagt, daß die Produktplanung alle Abteilungen eines Unternehmens sowie auch dessen Kundenvertreter mit einbezieht. Ziel ist der gemeinsame Informationsaustausch, um den Entwurfs-, Entwicklungs- und Produktionsprozeß des Produktes zu rationalisieren, damit das Endprodukt den Erwartungen und Bedürfnissen des Endverbrauchers entspricht. Die US-Automobilindustrie hat SE in den letzten 10 Jahren sehr erfolgreich eingesetzt, um die Kundenzufriedenheit für ihre Produkte zu steigern. Ribbens zeigt anhand von Fallstudien und Anwendungsbeispielen in der Automobilindustrie, daß SE und neue Produktentwicklungsverfahren auch in anderen Branchen Anwendung finden können. Ein topaktuelles und praxisorientiertes Buch, das sich von der breiten Masse der theoretischen Literatur abhebt. (y03/00)

Download or read book System Engineering Analysis Design and Development written by Charles S. Wasson and published by John Wiley & Sons. This book was released on 2015-11-16 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Praise for the first edition: “This excellent text will be useful to everysystem engineer (SE) regardless of the domain. It covers ALLrelevant SE material and does so in a very clear, methodicalfashion. The breadth and depth of the author's presentation ofSE principles and practices is outstanding.” –Philip Allen This textbook presents a comprehensive, step-by-step guide toSystem Engineering analysis, design, and development via anintegrated set of concepts, principles, practices, andmethodologies. The methods presented in this text apply to any typeof human system -- small, medium, and large organizational systemsand system development projects delivering engineered systems orservices across multiple business sectors such as medical,transportation, financial, educational, governmental, aerospace anddefense, utilities, political, and charity, among others. Provides a common focal point for “bridgingthe gap” between and unifying System Users, System Acquirers,multi-discipline System Engineering, and Project, Functional, andExecutive Management education, knowledge, and decision-making fordeveloping systems, products, or services Each chapter provides definitions of key terms,guiding principles, examples, author’s notes, real-worldexamples, and exercises, which highlight and reinforce key SE&Dconcepts and practices Addresses concepts employed in Model-BasedSystems Engineering (MBSE), Model-Driven Design (MDD), UnifiedModeling Language (UMLTM) / Systems Modeling Language(SysMLTM), and Agile/Spiral/V-Model Development such asuser needs, stories, and use cases analysis; specificationdevelopment; system architecture development; User-Centric SystemDesign (UCSD); interface definition & control; systemintegration & test; and Verification & Validation(V&V) Highlights/introduces a new 21st Century SystemsEngineering & Development (SE&D) paradigm that is easy tounderstand and implement. Provides practices that are critical stagingpoints for technical decision making such as Technical StrategyDevelopment; Life Cycle requirements; Phases, Modes, & States;SE Process; Requirements Derivation; System ArchitectureDevelopment, User-Centric System Design (UCSD); EngineeringStandards, Coordinate Systems, and Conventions; et al. Thoroughly illustrated, with end-of-chapter exercises andnumerous case studies and examples, Systems EngineeringAnalysis, Design, and Development, Second Edition is a primarytextbook for multi-discipline, engineering, system analysis, andproject management undergraduate/graduate level students and avaluable reference for professionals.

Download or read book Automotive Product Development written by Vivek D. Bhise and published by CRC Press. This book was released on 2017-05-08 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about how to develop future automotive products by applying the latest methodologies based on a systems engineering approach and by taking into account many issues facing the auto industry such as meeting government safety, emissions and fuel economy regulations, incorporating advances in new technology applications in structural materials, power trains, vehicle lighting systems, displays and telematics, and satisfying the very demanding customer. It is financially disastrous for any automotive company to create a vehicle that very few people want. To design an automotive product that will be successful in the marketplace requires carefully orchestrated teamwork of experts from many disciplines, substantial amount of resources, and application of proven techniques at the right time during the product development process. Automotive Product Development: A Systems Engineering Implementation is intended for company management personnel and graduate students in engineering, business management and other disciplines associated with the development of automotive and other complex products.

Download or read book Software Engineering at Google written by Titus Winters and published by O'Reilly Media. This book was released on 2020-02-28 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, software engineers need to know not only how to program effectively but also how to develop proper engineering practices to make their codebase sustainable and healthy. This book emphasizes this difference between programming and software engineering. How can software engineers manage a living codebase that evolves and responds to changing requirements and demands over the length of its life? Based on their experience at Google, software engineers Titus Winters and Hyrum Wright, along with technical writer Tom Manshreck, present a candid and insightful look at how some of the world’s leading practitioners construct and maintain software. This book covers Google’s unique engineering culture, processes, and tools and how these aspects contribute to the effectiveness of an engineering organization. You’ll explore three fundamental principles that software organizations should keep in mind when designing, architecting, writing, and maintaining code: How time affects the sustainability of software and how to make your code resilient over time How scale affects the viability of software practices within an engineering organization What trade-offs a typical engineer needs to make when evaluating design and development decisions

Download or read book Engineering Development and Philosophy written by Steen Hyldgaard Christensen and published by Springer Science & Business Media. This book was released on 2012-10-30 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This inclusive, cross-cultural study rethinks the nexus between engineering, development, and culture. It offers diverse commentary from a range of disciplinary perspectives on how the philosophies of today’s cultural triumvirate—American, European and Chinese—are shaped and given nuance by the cross-fertilization of engineering and development. Scholars from the humanities and social sciences as well as engineers themselves reflect on key questions that arise in this relational context, such as how international development work affects the professional views, identities, practice and ethics of engineers. The first volume to offer a systematic and collaborative study that cuts across continental boundaries, the book delineates the kinds of skills and competences that tomorrow’s engineering success stories will require, and analyzes fascinating aspects of the interplay between engineering and philosophy, such as how traditionally Chinese ways of thinking can influence modern engineering practice in the world’s most populous country. China’s problematic mix of engineering woes and wonders, from the high-profile crash on its high-profile rail network to its ‘bird’s nest’ Olympic stadium, adds to the urgency for reform, while Europe’s Enlightenment-informed legal frameworks are contrasted with Chinese mechanisms in their governance of the field of nanotechnology, a crucial element of future technical evolution. Fascinating and compelling in equal measure, this volume addresses one of the topics at the leading edge of humanity’s quest to survive, and to thrive.​

Download or read book Modern Software Engineering written by David Farley and published by Addison-Wesley Professional. This book was released on 2021-11-16 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improve Your Creativity, Effectiveness, and Ultimately, Your Code In Modern Software Engineering, continuous delivery pioneer David Farley helps software professionals think about their work more effectively, manage it more successfully, and genuinely improve the quality of their applications, their lives, and the lives of their colleagues. Writing for programmers, managers, and technical leads at all levels of experience, Farley illuminates durable principles at the heart of effective software development. He distills the discipline into two core exercises: learning and exploration and managing complexity. For each, he defines principles that can help you improve everything from your mindset to the quality of your code, and describes approaches proven to promote success. Farley's ideas and techniques cohere into a unified, scientific, and foundational approach to solving practical software development problems within realistic economic constraints. This general, durable, and pervasive approach to software engineering can help you solve problems you haven't encountered yet, using today's technologies and tomorrow's. It offers you deeper insight into what you do every day, helping you create better software, faster, with more pleasure and personal fulfillment. Clarify what you're trying to accomplish Choose your tools based on sensible criteria Organize work and systems to facilitate continuing incremental progress Evaluate your progress toward thriving systems, not just more "legacy code" Gain more value from experimentation and empiricism Stay in control as systems grow more complex Achieve rigor without too much rigidity Learn from history and experience Distinguish "good" new software development ideas from "bad" ones Register your book for convenient access to downloads, updates, and/or corrections as they become available. See inside book for details.

Download or read book The Role of Engineering in Nuclear Energy Development written by and published by . This book was released on 1951 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Engineering for Sustainable Human Development written by Bernard Amadei and published by . This book was released on 2014-08-01 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The challenge of improving the daily lives of people in developing communities calls for a new generation of global engineers who can operate in environments vastly different from those in the developed world. Engineers must become creative and innovative as they contend with uncertainty, complexity, and constraints in unfamiliar cultural settings. They must also deal with a multitude of technical and nontechnical issues beyond their accustomed practice. In this book, Bernard Amadei addresses the role of engineering in poverty reduction and human development. He introduces a framework to help engineers conduct small-scale projects in communities vulnerable to the consequences of a wide range of adverse events. His framework combines concepts and tools traditionally used by development agencies with techniques from engineering project management and systems thinking. When blended, these tools and techniques from seemingly unrelated fields offer engineers better methods to manage the difficulties inherent in community development projects.Engineering for Sustainable Human Development is about the delivery of projects that are done right from a performance (technical) point of view and are also the right projects from a social, environmental, and economic (context) point of view. This multidisciplinary approach to sustainable engineering will be valuable to practitioners and students, as well as people associated with development organizations and aid agencies.

Download or read book Quality Assurance in Research and Development written by Roberts and published by CRC Press. This book was released on 1983-10-27 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chapter 7: PROJECT CONSTRUCTION -- I. MATERIAL IDENTIFICATION AND CONTROL -- II. CONTROL OF SPECIAL PROCESSES -- III. INSPECTION -- IV. HANDLING, STORAGE, AND SHIPPING -- V. NONCONFORMING MATERIALS, PARTS, OR COMPONENTS -- APPENDIX: AN ANALYSIS OF CORRECTIVE ACTION REPORTS GENERATED DURING A 3-YEAR PERIOD -- REFERENCES -- Chapter 8: CONTROL OFMEASURING AND TEST EQUIPMENT -- I. THE NEED FOR FORMAL CONTROL -- II. TRACEABILITY -- A. Definition of Traceability -- B. Purposes and Uses of Traceability -- C. Measurement Traceability and Standards Traceability -- D. The Question Posed to NBS -- E. NBS Advice on Traceability -- III. PROGRAM DESCRIPTION -- IV. SCOPE -- V. QUALITY LEVELS -- VI. CENTRALIZED CONTROL -- VII. CALIBRATION PROCEDURES -- IX. EVALUATION OF CALIBRATION SUPPLIERS -- REFERENCES -- Chapter 9: TEST CONTROL -- I. TEST PLAN -- II. TEST PROCEDURES -- III . DOCUMENTATION AND REVIEW OF RESULTS -- REFERENCES -- Chapter 10: SOFTWARE -- I. BACKGROUND -- II. THE SOFTWARE QUALITY ASSURANCE PROGRAM -- A. Planning -- B. Software Quality Levels and QA Plans -- C. Software Development Process -- D. Evaluation -- REFERENCES -- Chapter 11: RECORDS AND REPORTING -- I. PROJECT RECORDS -- II. REPORTS -- III. TRACEABILITY -- IV. RETENTION -- REFERENCES -- Chapter 12: AUDITING THE PROGRAM -- I. GENERAL AUDITING CONSIDERATIONS -- II. PROJECTS -- A. Specified QA -- B. Standard Laboratory Practice -- III. SYSTEM AUDITS -- IV. SUPPLIER AUDITS -- REFERENCES -- INDEX