Download or read book Development Application and Characterization of a Single Cell Based Sensor written by Shalini Prasad and published by . This book was released on 2004 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biosensors for Single Cell Analysis written by Jian Chen and published by Academic Press. This book was released on 2021-10-26 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosensors for Single-Cell Analysis explores a wide range of biosensor technologies and their applications in single-cell characterization and analysis. Sections cover key biophysical and chemical single-cell properties that consider proteomic, metabolic, electrical, mechanical and optical properties. Each chapter features key definitions and case studies, providing detailed guidance for researchers who want to replicate covered solutions in their work. Tutorial sections, evaluations of the current state-of-the-field and future developments are also included. Microfluidic approaches to characterization, such as microfluidic impedance flow cytometry and microfluidic flow cytometry are considered alongside more conventional approaches, such as mass spectroscopy, fluorescent and mass flow cytometry. Additionally, key types of biosensors are covered, including atomic force microscopy, micropipette aspiration, optical tweezers, microfluidic hydrodynamic stretchers, microfluidic constriction channel and microfluidic optical stretchers. - Includes chapters focused on key single-cell properties, such as proteomic, metabolic and mechanical characterization - Features case studies that illustrate the application of biosensors for single-cell analysis - Considers microfluidic approaches for each single-cell property discussed - Explores future directions for single-cell analysis and biosensor technology
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2008 with total page 850 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Microfluidic Volume Sensor for Single Cell Growth Measurements written by Wenyang Jing and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Label free and Multi parametric Monitoring of Cell based Assays with Substrate embedded Sensors written by Maximilian Oberleitner and published by Springer. This book was released on 2017-09-26 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis describes novel substrate embedded physical sensors that can be used to monitor different types of cell-based assays non-invasively and label-free. The sensors described provide integrative information of the cells under study with an adaptable time resolution (ranging from milliseconds to days). This information about the dynamic cell response to chemical, physical or biological stimuli defines a new paradigm in fundamental biomedical research. The author, Maximilian Oberleitner, describes approaches in which the cells are directly grown on different sensor surfaces (gold-film electrodes, shear wave resonators or dye-doped polymer films). This approach, with the reacting cells in particularly close proximity and contact with the sensor surface, is key to a remarkable sensitivity, opening the way for a variety of new applications. This thesis not only introduces the fundamentals of each approach, but it also describes in great detail the design principles and elucidates the boundary conditions of the new sensors.
Download or read book Multisensor Systems for Analysis of Liquids and Gases Trends and Developments written by Larisa Lvova and published by Frontiers Media SA. This book was released on 2019-01-22 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays the application of multisensor systems for the analysis of liquids and gases is becoming more and more popular in analytical chemistry. Such systems, also known as “electronic tongues” and “electronic noses” are based on various types of chemical sensors and biosensors with different transduction principles combined with multivariate data processing protocols. These instruments received significant interest due to their simplicity, low costs and the possibility to obtain reliable chemical information from complex unresolved analytical signals. A distinct feature of electronic tongues and noses is that they can be calibrated for prediction of complex integral features in samples, like e.g. taste, odor, toxicity, geographical origin, general conformity with certain standards, etc. – the tasks that otherwise would require involvement of complex analytical instrumentation, human or animal sensory panels. In the present eBook the original research and review articles in the area of multisensor approach are collected. They dedicated to the novel sensor materials development, measuring techniques evaluation, electronics, data processing protocols and practical applications. An editorial foreword article is followed by the researches authored by leading scientists in the field of chemical sensors and artificial sensing systems. With this eBook we hope to inspire further interest and new research efforts in this exciting area.
Download or read book Cell based Biosensors written by Qingjun Liu and published by Artech House. This book was released on 2009-10 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by recognized experts the field, this leading-edge resource is the first book to systematically introduce the concept, technology, and development of cell-based biosensors. You find details on the latest cell-based biosensor models and novel micro-structure biosensor techniques. Taking an interdisciplinary approach, this unique volume presents the latest innovative applications of cell-based biosensors in a variety of biomedical fields. The book also explores future trends of cell-based biosensors, including integrated chips, nanotechnology and microfluidics. Over 140 illustrations help clarify key topics throughout the book.
Download or read book 6th International Conference on the Development of Biomedical Engineering in Vietnam BME6 written by Toi Vo Van and published by Springer. This book was released on 2017-09-21 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: Under the motto “Healthcare Technology for Developing Countries” this book publishes many topics which are crucial for the health care systems in upcoming countries. The topics include Cyber Medical Systems Medical Instrumentation Nanomedicine and Drug Delivery Systems Public Health Entrepreneurship This proceedings volume offers the scientific results of the 6th International Conference on the Development of Biomedical Engineering in Vietnam, held in June 2016 at Ho Chi Minh City.
Download or read book Robotics written by Oliver Brock and published by MIT Press. This book was released on 2009 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art robotics research on such topics as manipulation, motion planning, micro-robotics, distributed systems, autonomous navigation, and mapping. Robotics: Science and Systems IV spans a wide spectrum of robotics, bringing together researchers working on the foundations of robotics, robotics applications, and analysis of robotics systems. This volume presents the proceedings of the fourth annual Robotics: Science and Systems conference, held in 2008 at the Swiss Federal Institute of Technology in Zurich. The papers presented cover a range of topics, including computer vision, mapping, terrain identification, distributed systems, localization, manipulation, collision avoidance, multibody dynamics, obstacle detection, microrobotic systems, pursuit-evasion, grasping and manipulation, tracking, spatial kinematics, machine learning, and sensor networks as well as such applications as autonomous driving and design of manipulators for use in functional-MRI. The conference and its proceedings reflect not only the tremendous growth of robotics as a discipline but also the desire in the robotics community for a flagship event at which the best of the research in the field can be presented.
Download or read book Dekker Encyclopedia of Nanoscience and Nanotechnology written by James A. Schwarz and published by CRC Press. This book was released on 2004 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Measuring Compositional and Growth Properties of Single Cells written by Francisco Feijó Delgado and published by . This book was released on 2013 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: The physical properties of a cell are manifestations of its most basic molecular and metabolic processes. In particular, size has been a sought metric, which can be difficult to ascertain with great resolution or for smaller organisms. The advancement of single-cell measurement techniques and the understanding of cell-to-cell variability have renewed the interest in size characterization. In addition, knowledge of how individual cells grow and coordinate their growth with the cell cycle is of fundamental interest to understanding cell development, but various approaches for describing cellular growth patterns have often reached irreconcilable conclusions. In this thesis, a highly sensitive microfabricated single-cell mass sensor - the suspended microchannel resonator - is used to demonstrate cellular growth measurements by mass accumulation for several microorganism, ranging from bacterial cells to eukaryotes and mammalian cells. From those measurements insights about cellular growth are derived, demonstrating that larger cells grow faster than smaller ones, consistent with exponential-like growth patterns and incompatible with linear growth models. Subsequently, the implementation of mechanical traps as means to optimize existing sensors is presented and the techniques are applied to the measurement of total mass, density and volume at the single-cell level. Finally, a method is introduced to quantify cellular dry mass, dry density and water content. It is based on weighing the same cell first in a water-based fluid and subsequently in a deuterium oxide-based fluid, which rapidly exchanges the intracellular water content. Correlations between dry density and cellular proliferation and composition are described. Dry density is described as a quantitative index that correlates with proliferation and cellular chemical composition.
Download or read book Single Cell Analysis written by J. Paul Robinson and published by Springer. This book was released on 2017-04-18 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the current state of the art in single cell analysis, an area that involves many fields of science – from clinical hematology, functional analysis and drug screening, to platelet and microparticle analysis, marine biology and fundamental cancer research. This book brings together an eclectic group of current applications, all of which have a significant impact on our current state of knowledge. The authors of these chapters are all pioneering researchers in the field of single cell analysis. The book will not only appeal to those readers more focused on clinical applications, but also those interested in highly technical aspects of the technologies. All of the technologies identified utilize unique applications of photon detection systems.
Download or read book Essentials of Single Cell Analysis written by Fan-Gang Tseng and published by Springer. This book was released on 2016-01-21 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of single-cell isolation, separation, injection, lysis and dynamics analysis as well as a study of their heterogeneity using different miniaturized devices. As an important part of single-cell analysis, different techniques including electroporation, microinjection, optical trapping, optoporation, rapid electrokinetic patterning and optoelectronic tweezers are described in detail. It presents different fluidic systems (e.g. continuous micro/nano-fluidic devices, microfluidic cytometry) and their integration with sensor technology, optical and hydrodynamic stretchers etc., and demonstrates the applications of single-cell analysis in systems biology, proteomics, genomics, epigenomics, cancer transcriptomics, metabolomics, biomedicine and drug delivery systems. It also discusses the future challenges for single-cell analysis, including the advantages and limitations. This book is enjoyable reading material while at the same time providing essential information to scientists in academia and professionals in industry working on different aspects of single-cell analysis. Dr. Fan-Gang Tseng is a Distinguished Professor of Engineering and System Science at the National Tsing Hua University, Taiwan. Dr. Tuhin Subhra Santra is a Research Associate at the California Nano Systems Institute, University of California at Los Angeles, USA.
Download or read book Comprehensive Biomaterials II written by Kevin Healy and published by Elsevier. This book was released on 2017-05-18 with total page 4865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Biomaterials II, Second Edition, Seven Volume Set brings together the myriad facets of biomaterials into one expertly-written series of edited volumes. Articles address the current status of nearly all biomaterials in the field, their strengths and weaknesses, their future prospects, appropriate analytical methods and testing, device applications and performance, emerging candidate materials as competitors and disruptive technologies, research and development, regulatory management, commercial aspects, and applications, including medical applications. Detailed coverage is given to both new and emerging areas and the latest research in more traditional areas of the field. Particular attention is given to those areas in which major recent developments have taken place. This new edition, with 75% new or updated articles, will provide biomedical scientists in industry, government, academia, and research organizations with an accurate perspective on the field in a manner that is both accessible and thorough. Reviews the current status of nearly all biomaterials in the field by analyzing their strengths and weaknesses, performance, and future prospects Covers all significant emerging technologies in areas such as 3D printing of tissues, organs and scaffolds, cell encapsulation; multimodal delivery, cancer/vaccine - biomaterial applications, neural interface understanding, materials used for in situ imaging, and infection prevention and treatment Effectively describes the many modern aspects of biomaterials from basic science, to clinical applications
Download or read book Development and Application of Biosensor Detectors written by Rebecca Jean Whelan and published by . This book was released on 2003 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Smart Biosensor Technology written by George K. Knopf and published by CRC Press. This book was released on 2018-11-15 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the success of the first edition, this second edition continues to build upon fundamental principles of biosensor design and incorporates recent advances in intelligent materials and novel fabrication techniques for a broad range of real world applications. The book provides a multi-disciplinary focus to capture the ever-expanding field of biosensors. Smart Biosensor Technology, Second Edition includes contributions from leading specialists in a wide variety of fields with a common focus on smart biosensor design. With 21 chapters organized in five parts, this compendium covers the fundamentals of smart biosensor technology, important issues related to material design and selection, principles of biosensor design and fabrication, advances in bioelectronics, and a look at specific applications related to pathogen detection, toxicity monitoring, microfluidics and healthcare. Features Provides a solid background in the underlying principles of biosensor design and breakthrough technologies for creating more intelligent biosensors Focusses on material design and selection including cutting-edge developments in carbon nanotubes, polymer nanowires, and porous silicon Examines machine learning and introduces concepts such as DNA-based molecular computing for smart biosensor function Explores the principles of bioelectronics and nerve cell microelectrode arrays for creating novel transducers and physiological biosensors Devotes several chapters to biosensors developed to detect and monitor a variety of toxins and pathogens Offers expert opinions on the future directions, challenges and opportunities in the field
Download or read book Microfluidics for Cellular Applications written by Gerardo Perozziello and published by Elsevier. This book was released on 2023-04-13 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics for Cellular Applications describes microfluidic devices for cell screening from a physical, technological and applications point-of-view, presenting a comparison with the cell microenvironment and conventional instruments used in medicine. Microfluidic technologies, protocols, devices for cell screening and treatment have reached an advanced state but are mainly used in research. Sections break them down into practical applications and conventional medical procedures and offers insights and analysis on how higher resolutions and fast operations can be reached. This is an important resource for those from an engineering and technology background who want to understand more and gain additional insights on cell screening processes. - Outlines the major applications of microfluidic devices in medicine and biotechnology - Assesses the major challenges of using microfluidic devices in terms of complexity of the control set-up, ease of use, integration capability, automation level, analysis throughput, content and costs - Describes the major fabrication techniques for assembling effective microfluidic devices for bioapplications
