Download or read book Development and Testing of Vehicle Software and its Influence on Sustainable Transport written by Antonio Colmenar-Santos and published by Springer Nature. This book was released on 2024-02-11 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book evaluates the contributions of the electronic control unit software of an electric vehicle on sustainability and society, such as the reduction of emissions during a product design and the improvements in the vehicle. A sustainable transport model is proposed, demonstrating its economic viability. By validating software in a more efficient way and adding new functionalities to the software to enhance driving efficiency, energy consumption can be significantly reduced. Therefore, software validation and development have a significant impact on sustainability. This book offers innovative validation solutions based on artificial intelligence techniques to reduce validation time and emissions. The impact of driving efficiency on sustainable transport models is studied in detail, making proposals to be considered in the current environmental policies under discussion within the European Union in order to improve the sustainability of transport models. Vehicles are becoming sophisticated electronic systems due to the fact that they are integrating a significant number of electronic control units. This trend will certainly continue in the year to come. Consequently, software validation techniques are a key element for car manufacturers in order to ensure the quality of the vehicle. This book contributes to these efforts.
Download or read book Practice and Innovations in Sustainable Transport written by Tariq Muneer and published by MDPI. This book was released on 2020-05-28 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book continues with an experimental analysis conducted to obtain accurate and complete information about electric vehicles in different traffic situations and road conditions. For the experimental analysis in this study, three different electric vehicles from the Edinburgh College leasing program were equipped and tracked to obtain over 50 GPS and energy consumption data for short distance journeys in the Edinburgh area and long-range tests between Edinburgh and Bristol. In the following section, an adaptive and robust square root cubature Kalman filter based on variational Bayesian approximation and Huber’s M-estimation is proposed to accurately estimate state of charge (SOC), which is vital for safe operation and efficient management of lithium-ion batteries. A coupled-inductor DC-DC converter with a high voltage gain is proposed in the following section to match the voltage of a fuel cell stack to a DC link bus. Finally, the book presents a review of the different approaches that have been proposed by various authors to mitigate the impact of electric buses and electric taxis on the future smart grid.
Download or read book Automated Vehicles as a Game Changer for Sustainable Mobility written by Guy Fournier and published by Springer Nature. This book was released on with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Experimenting for Sustainable Transport written by Remco Hoogma and published by Routledge. This book was released on 2005-06-29 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technological change is a central feature of modern societies and a powerful source for social change. There is an urgent task to direct these new technologies towards sustainability, but society lacks perspectives, instruments and policies to accomplish this. There is no blueprint for a sustainable future, and it is necessary to experiment with alternative paths that seem promising. Various new transport technologies promise to bring sustainability benefits. But as this book shows, important lessons are often overlooked because the experiments are not designed to challenge the basic assumptions about established patterns of transport choices. Learning how to organise the process of innovation implementation is essential if the maximum impact is to be achieved - it is here that strategic niche management offers new perspectives. The book uses a series of eight recent experiments with electric vehicles, carsharing schemes, bicycle pools and fleet management to illustrate the means by which technological change must be closely linked to social change if successful implementation is to take place. The basic divide between proponents of technological fixes and those in favour of behavioural change needs to be bridged, perhaps indicating a third way.
Download or read book Sustainable Rail Transport written by Marin Marinov and published by Springer. This book was released on 2019-07-24 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of rail orientated research articles, covering a variety of topics on rail operations research and management of rail systems as well as innovation, particularly focusing on sustainability aspects. The material consists of the most recent research work of the authors. The authorship is international, which makes it an interesting read for rail academics and professionals around the world. Although the material has a rail research focus the material is also excellent for preparation and delivery of rail, transport and logistics orientated courses and programmes. The target audience primarily comprises research experts in transport research, but the book may also be beneficial for graduate students alike.
Download or read book Sustainable Transportation Program 2016 Annual Report written by Oak Ridge National Laboratory (U S ) and published by Government Printing Office. This book was released on 2017-10-05 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oak Ridge National Laboratory's (ORNL's) Sustainable Transportation Program (STP) works with government and industry to develop scientific knowledge and new technologies that accelerate the deployment of energy-efficient vehicles and intelligent, secure, and accessible transportation systems. Scientists are tackling complex challenges in transportation using comprehensive capabilities at ORNL's National Transportation Research Center and the laboratory's signature strengths in high-performance computing, neutron sciences, materials science, and advanced manufacturing. Research focuses on electrification, efficiency of combustion and emissions, data science and automated vehicles, and materials for future systems. Highlights from 2016 include: Electrification, Efficiency of combustion and emission controls, Data science and automated vehicles, and Materials for future systems. This annual report is a short summary and snapshot featuring several other accomplishments from the STP team. From motors that achieve higher power density without rare earth materials to thought leadership on combustion as a continuum to new technologies in multimaterial joining and vehicle cybersecurity, ORNL researchers are shaping the future of transportation. Related items: Transportation & Navigation publications can be found here: https://bookstore.gpo.gov/catalog/transportation-navigation Biofuels & Renewable Energy publications can be found here: https://bookstore.gpo.gov/catalog/biofuels-renewable-energy Energy & Fuels publications can be found here: https://bookstore.gpo.gov/catalog/energy-fuels Engineering publications can be found here: https://bookstore.gpo.gov/catalog/engineering
Download or read book Experimenting for Sustainable Transport written by Remco Hoogma and published by Routledge. This book was released on 2005-06-29 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes eight experiments with sustainable transport options which are analysed in the context of established travel practice and car ownership and the problems they pose, and the tends in transport technology and policy.
Download or read book INCOSE Systems Engineering Handbook written by INCOSE and published by John Wiley & Sons. This book was released on 2023-07-06 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: SYSTEMS ENGINEERING HANDBOOK A comprehensive reference on the discipline and practice of systems engineering Systems engineering practitioners provide a wide range of vital functions, conceiving, developing, and supporting complex engineered systems with many interacting elements. The International Council on Systems Engineering (INCOSE) Systems Engineering Handbook describes the state-of-the-good-practice of systems engineering. The result is a comprehensive guide to systems engineering activities across any number of possible projects. From automotive to defense to healthcare to infrastructure, systems engineering practitioners are at the heart of any project built on complex systems. INCOSE Systems Engineering Handbook readers will find: Elaboration on the key systems life cycle processes described in ISO/IEC/IEEE 15288:2023; Chapters covering key systems engineering concepts, system life cycle processes and methods, tailoring and application considerations, systems engineering in practice, and more; and Appendices, including an N2 diagram of the systems engineering processes and a detailed topical index. The INCOSE Systems Engineering Handbook is a vital reference for systems engineering practitioners and engineers in other disciplines looking to perform or understand the discipline of systems engineering.
Download or read book Sustainable Energy efficient Transportation Infrastructure written by United States. Congress. House. Committee on Science and Technology (2007). Subcommittee on Technology and Innovation and published by . This book was released on 2008 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Combustion for Sustainable Transport written by Avinash Kumar Agarwal and published by Springer Nature. This book was released on 2021-12-12 with total page 367 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on advanced combustion technologies currently employed in internal combustion engines. It discusses different strategies for improving conventional diesel combustion. The volume includes chapters on low-temperature combustion techniques of compression-ignition engines which results in significant reduction of NOx and soot emissions. The content also highlights newly evolved gasoline compression technology and optical techniques in advanced gasoline direct injection engines. the research and its outcomes presented here highlight advancements in combustion technologies, analysing various issues related to in-cylinder combustion, pollutant formation and alternative fuels. This book will be of interest to those in academia and industry involved in fuels, IC engines, engine combustion research.
Download or read book Smart Cities Importance of Management and Innovations for Sustainable Development written by Dagmar Cagáňová and published by Springer Nature. This book was released on with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Intelligent Robotics and Applications written by Ming Xie and published by Springer. This book was released on 2009-12-16 with total page 1315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The market demands for skills, knowledge and personalities have positioned robotics as an important field in both engineering and science. To meet these challenging - mands, robotics has already seen its success in automating many industrial tasks in factories. And, a new era will come for us to see a greater success of robotics in n- industrial environments. In anticipating a wider deployment of intelligent and auto- mous robots for tasks such as manufacturing, eldercare, homecare, edutainment, search and rescue, de-mining, surveillance, exploration, and security missions, it is necessary for us to push the frontier of robotics into a new dimension, in which motion and intelligence play equally important roles. After the success of the inaugural conference, the purpose of the Second Inter- tional Conference on Intelligent Robotics and Applications was to provide a venue where researchers, scientists, engineers and practitioners throughout the world could come together to present and discuss the latest achievement, future challenges and exciting applications of intelligent and autonomous robots. In particular, the emphasis of this year’s conference was on “robot intelligence for achieving digital manufact- ing and intelligent automations. ” This volume of Springer’s Lecture Notes in Artificial Intelligence and Lecture Notes in Computer Science contains accepted papers presented at ICIRA 2009, held in Singapore, December 16–18, 2009. On the basis of the reviews and recommendations by the international Program Committee members, we decided to accept 128 papers having technical novelty, out of 173 submissions received from different parts of the world.
Download or read book Encyclopedia of Renewable and Sustainable Materials written by and published by Elsevier. This book was released on 2020-01-09 with total page 4238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of Renewable and Sustainable Materials, Five Volume Set provides a comprehensive overview, covering research and development on all aspects of renewable, recyclable and sustainable materials. The use of renewable and sustainable materials in building construction, the automotive sector, energy, textiles and others can create markets for agricultural products and additional revenue streams for farmers, as well as significantly reduce carbon dioxide (CO2) emissions, manufacturing energy requirements, manufacturing costs and waste. This book provides researchers, students and professionals in materials science and engineering with tactics and information as they face increasingly complex challenges around the development, selection and use of construction and manufacturing materials. Covers a broad range of topics not available elsewhere in one resource Arranged thematically for ease of navigation Discusses key features on processing, use, application and the environmental benefits of renewable and sustainable materials Contains a special focus on sustainability that will lead to the reduction of carbon emissions and enhance protection of the natural environment with regard to sustainable materials
Download or read book Global Laws on use of AI in Autonomous Vehicles written by Veteran Wg Cdr (Dr) SK Prakash and published by Notion Press. This book was released on 2024-10-30 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: GLOBAL LAWS ON USE OF AI IN AUTONOMOUS VEHICLES along with proposed changes to India’s Motor Vehicles Act for permitting Autonomous Vehicle delves into the intersection of AI and road transport, focusing on self-driving cars. It explains the three types of AI viz narrow AI, AGI, & ASI and discusses how global regions like the USA, Europe, and Asia-Pacific are evolving their laws to accommodate autonomous vehicles. The book raises issues of accident liability, testing regulations, and insurance needs, particularly addressing gaps in Indian legislation. It also focuses on India, highlighting the gaps in existing motor vehicle laws and policies that must be addressed to pave the way for self-driving cars in India. With detailed recommendations for policy reform, it is an essential read for anyone interested in transportation’s future.
Download or read book Revival of a City written by Jason Begley and published by Springer. This book was released on 2019-07-26 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2021 Coventry celebrates being the national City of Culture. Modern Coventry is a product of successive rounds of industrial, economic and social developments driven by regional, national and global forces. This book presents a timely opportunity to reflect on this rich, and often misunderstood, history. The book examines the development of industry, services, infrastructure and social transformation, and the role which globalising forces have played in influencing these, particularly since the 1950s. It looks at the experiences of the city of Coventry in responding to the challenges of socioeconomic change, technological advances, reconstruction and renewal. Issues of investment, economic decline, reconstruction, employment change and local and national governance are all considered in assessing the story of modern Coventry, a city influenced by new industries and development opportunities while still being shaped by its historical economic challenges. By focusing on the case of Coventry this book contributes to debates surrounding urban structural change, economic diversification and resilience from the perspective of a medium-sized city.
Download or read book Sustainable Development and Environmental Management written by Corrado Clini and published by Springer Science & Business Media. This book was released on 2010-06-29 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the new EU approach to environmental management and its attempt to place it in the perspective of sustainable development. Written by eminent scientists working on sustainable development, the book covers not only theoretical aspects but also gives practical cases and examples. China and other large and fast growing economies are putting increasing pressures on the global environment, but they are also looking at the European experience with great interest.
Download or read book Model Based Engineering of Collaborative Embedded Systems written by Wolfgang Böhm and published by Springer Nature. This book was released on 2020-12-14 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book presents the results of the "Collaborative Embedded Systems" (CrESt) project, aimed at adapting and complementing the methodology underlying modeling techniques developed to cope with the challenges of the dynamic structures of collaborative embedded systems (CESs) based on the SPES development methodology. In order to manage the high complexity of the individual systems and the dynamically formed interaction structures at runtime, advanced and powerful development methods are required that extend the current state of the art in the development of embedded systems and cyber-physical systems. The methodological contributions of the project support the effective and efficient development of CESs in dynamic and uncertain contexts, with special emphasis on the reliability and variability of individual systems and the creation of networks of such systems at runtime. The project was funded by the German Federal Ministry of Education and Research (BMBF), and the case studies are therefore selected from areas that are highly relevant for Germany’s economy (automotive, industrial production, power generation, and robotics). It also supports the digitalization of complex and transformable industrial plants in the context of the German government's "Industry 4.0" initiative, and the project results provide a solid foundation for implementing the German government's high-tech strategy "Innovations for Germany" in the coming years.
