Download or read book Development and Implementation of a Computational Surgical Planning Model for Pre operative Planning and Post operative Assessment and Analysis of Total Hip Arthroplasty written by Manh Duc Ta and published by . This book was released on 2019 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Total hip arthroplasty (THA) is most often used to treat osteoarthritis of the hip joint. Due to lack of a better alternative, newer designs are evaluated experimentally using mechanical simulators and cadavers. These evaluation techniques, though necessary, are costly and time-consuming, limiting testing on a broader population. Due to the advancement in technology, the current focus has been to develop patient-specific solutions. The hip joint can be approximated as encompassing a bone socket geometry, and therefore the shapes of the implant are well constrained. The variability of performance after the surgery is mostly driven by surgical procedures. It is believed that placing the acetabular component within the “safe zone” will commonly lead to successful surgical outcomes [1]. Unfortunately, recent research has revealed problems with the safe zone concept, and there is a need for a better tool which can aid surgeons in planning for surgery. With the advancement of computational power, more recent focus has been applied to the development of simulation tools that can predict implant performances. In this endeavor, a virtual hip simulator is being developed at the University of Tennessee Knoxville to provide designers and surgeons alike instant feedback about the performance of the hip implants. The mathematical framework behind this tool has been developed. In this dissertation, the primary focus is to further expand the capabilities of the existing hip model and develop the front-end that can replicate a total hip arthroplasty surgery procedure pre-operatively, intra-operatively, and post-operatively. This new computer-assisted orthopaedic surgical tool will allow surgeons to simulate surgery, then predict, compare, and optimize post-operative THA outcomes based on component placement, sizing choices, reaming and cutting locations, and surgical methods. This more advanced mathematical model can also reveal more information pre-operatively, allowing a surgeon to gain ample information before surgery, especially with difficult and revision cases. Moreover, this tool could also help during the implant development design process as designers can instantly simulate the performance of their new designs, under various surgical, simulated in vivo conditions.
Download or read book Personalized Hip and Knee Joint Replacement written by Charles Rivière and published by Springer Nature. This book was released on 2020-06-30 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book describes and illustrates the surgical techniques, implants, and technologies used for the purpose of personalized implantation of hip and knee components. This new and flourishing treatment philosophy offers important benefits over conventional systematic techniques, including component positioning appropriate to individual anatomy, improved surgical reproducibility and prosthetic performance, and a reduction in complications. The techniques described in the book aim to reproduce patients’ native anatomy and physiological joint laxity, thereby improving the prosthetic hip/knee kinematics and functional outcomes in the quest of the forgotten joint. They include kinematically aligned total knee/total hip arthroplasty, partial knee replacement, and hip resurfacing. The relevance of available and emerging technological tools for these personalized approaches is also explained, with coverage of, for example, robotics, computer-assisted surgery, and augmented reality. Contributions from surgeons who are considered world leaders in diverse fields of this novel surgical philosophy make this open access book will invaluable to a wide readership, from trainees at all levels to consultants practicing lower limb surgery
Download or read book Computer Assisted Orthopaedic Surgery for Hip and Knee written by Nobuhiko Sugano and published by Springer. This book was released on 2018-04-10 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on two major areas in the field of computer assisted orthopaedic surgery (CAOS): hip and knee surgery. It reviews the current clinical status of the various CAOS tools for hip and knee arthroplasty, osteotomy, ligament reconstruction, spine surgery, trauma surgery, and tumour surgery that have become available in recent years and discusses future applications based on fundamental research and continuously developing computer technology / devices. Computer Assisted Orthopaedic Surgery for Hip and Knee highlights three areas – total knee arthroplasty (TKA); total hip arthroplasty (THA) and hip osteotomy; and statistical shape modelling. It is a valuable resource for orthopaedic surgeons, clinical technologists and computer scientists and other specialists interested in this technology.
Download or read book Total Hip Arthroplasty written by Emre Tokgoz and published by Springer Nature. This book was released on 2022-10-19 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Total Hip Arthroplasty: Medical and Biomedical Engineering and Science Concepts provides an extensive overview of the most recent advancements in total hip arthroplasty (THA) through a thorough review of the literature in medicine, engineering, mathematics, computing, and related technologies. Coverage includes the most recent engineering and computing techniques such as robotics, biomechanics, artificial intelligence, and optimization, as well as the medical and surgical aspects of pre-existing conditions, surgical procedure types, postoperative complications, and patient care. This book will be a valuable introductory reference for academics, students, and researchers to THA concepts and advances.
Download or read book Total Hip Replacement Surgery written by S. K. S. Marya and published by JP Medical Ltd. This book was released on 2010-10-09 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and authoritative book on total hip replacement surgery which focuses on surgical technique and also discusses preoperative planning, clinical assessment, hip scoring, radiology, templating and preparation. It includes extensive coverage of surgical techniques including cemented and un-cemented THR, post-operative recovery, planning and management of rehabilitation and physiotherapy.
Download or read book Design and Evaluation of a Pre operative Planner for Total Hip Replacement Surgery written by Sumitha Rao and published by . This book was released on 1996 with total page 25 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: "The Pre-Operative planner is used to reduce the rate of dislocations due to malpositioning of the acetabular implant in Total Hip Replacement (THR) surgeries. Traditional methods have been used only to determine the range of implant sizes that the surgeon takes into the operating theater. This thesis aims at providing the surgeon with an interface that assists in determining both the size and orientation of the implant. This interface has to be designed so that the surgeon achieves the task of positioning and orienting the implant in minimal time with maximum accuracy. The design of the system is divided into input and output methods. The input method allows the user to manipulate planning information. The output method communicates all necessary information regarding the state of the planning process to the user. We tested the system using three different input methods: the graphical sliders or buttons, the mouse, and the spaceball. The output method uses cross sectional views of the CT data with graphical overlays of the implant and surface models of the pelvis. Two different types of users participated in the tests: the 'domain experts' (surgeons) and 'computer experts' (students). The test task used a phantom pelvis with a pre-attached implant. Users were asked to recreate the position of this implant using the different input and output methods. The best combination of input and output methods were identified by usability testing using error, time, learning curve, and ease of use as the measurement criteria."
Download or read book Revision Total Hip Arthroplasty written by James V. Bono and published by Springer Science & Business Media. This book was released on 1999 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an in-depth understanding of a comprehensive approach to revision total hip arthroplasty and its complications from leading authorities in the field. Topics include the discussion of failure mechanisms, evaluations of the painful total hip, descriptions of pre-operative planning and preparation for surgery, surgical techniques for the acetabulum and femur, and evaluation of post-operative complications. There are also discussions on neurologic injury, anesthetic complications, cardiac complications, femoral stem breakage and abdominal complications. In addition there is a section on the future of total revision hip arthroplasty and a discussion on medical malpractice. With over 500 illustrations, this is the definitive volume on revision total hip arthtoplasty.
Download or read book Fundamentals of Revision Hip Arthroplasty written by David Jacofsky and published by CRC Press. This book was released on 2024-06-01 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Revision Hip Arthroplasty: Diagnosis, Evaluation, and Treatment is a unique and very timely book designed for surgeons who are beginning to more commonly encounter hip revisions in their practice. Unlike many traditional books on revision, Fundamentals of Revision Hip Arthroplasty does not focus on the most difficult and challenging of cases. Rather, Fundamentals of Revision Hip Arthroplasty is intended to guide the surgeon in the evaluation of the failed or painful total joint replacement, review basic tenants and surgical principles of revision arthroplasty, and guide the surgeon in determining whether a given case is one that should be managed or is best referred to a tertiary orthopedic center. Along with their 32 contributors, Dr. David J. Jacofsky and Dr. Anthony K. Hedley provide detailed information inside Fundamentals of Revision Hip Arthroplasty, including appropriate preoperative evaluation, equipment requirements, surgical planning, need for augments and allograft, and surgical techniques. Surgeons will be tackling hip revision surgery more frequently as the number of these cases is exponentially increasing. Fundamentals of Revision Hip Arthroplasty provides a “go-to” resource to turn to for guidance by community arthroplasty surgeons, arthroplasty fellows, and residents.
Download or read book Design and Evaluation of 3 D Pre operative Planning Software written by Mike Blackwell and published by . This book was released on 1996 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Abstract: "We describe a methodology for evaluating the user interface components of a pre-operative planning system for performing complex 3-D spatial manipulation and reasoning tasks. The design of a pre- operative planning system for the alignment of acetabular implants in total hip replacement (THR) surgery is used as an example. For this application, we have implemented several alternatives to two of the planner's sub-systems. We report the results of a pilot study which evaluate these alternative components with respect to task and user specific design criteria."
Download or read book Minimally Invasive Surgery in Total Hip Arthroplasty written by Joachim Pfeil and published by Springer Science & Business Media. This book was released on 2010-04-16 with total page 104 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent years have witnessed a trend toward the use of minimally invasive techniques in all areas of orthopedic surgery, including hip replacement. This book aims to provide a comprehensive guide to the use of minimally invasive surgery in total hip arthroplasty. The four commonly employed approaches – anterior, anterolateral OCM, anterolateral supine, and posterior – are described in detail with the aid of high-quality illustrations. For each approach, clear guidance is offered on patient selection, patient positioning, surgical procedure, postsurgical care, and rehabilitation. Potential complications and the advantages and disadvantages of each option are carefully weighed up, and experts also present their personal experiences, outcomes, and success rates with the different approaches. The book concludes by discussing future trends in hip arthroplasty.
Download or read book Illustrated Tips and Tricks in Hip and Knee Reconstructive and Replacement Surgery written by Daniel J. Berry and published by Lippincott Williams & Wilkins. This book was released on 2019-09-16 with total page 1248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the popular Tips and Tricks series, Illustrated Tips and Tricks in Hip and Knee Reconstruction provides succinct and practical advice acquired from years of professional practice in hip and knee surgery. Led by Drs. Daniel Berry and Marc Pagnano of the Mayo Clinic, this visually stunning reference focuses exclusively on detailed descriptions of technical tips and tricks for all aspects of hip and knee reconstruction. This unique approach is highly useful to orthopaedic surgery fellows and residents – anyone who would benefit from exposure to the wisdom that experienced attending surgeons pass on to those who are training in this complex field.
Download or read book Basics in Hip and Knee Arthroplasty E book written by Shrinand Vaidya and published by Elsevier Health Sciences. This book was released on 2017-06-17 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Basics in Hip and Knee Arthroplasty" is a comprehensive compilation of basic steps to be regimented before, during and after primary hip and knee reconstruction in arthritic patients. Often this information is scattered and difficult to acquire even after exploring Internet and multiple references. It should benefit Fellows, beginners and once-in-a-while Arthroplasty Surgeons of hip and knee to plan surgery, select correct implant and execute the job to the level of perfection. "The night before" book for the beginners, wherein review of literature and other theoretical jargon are avoided. Practical surgery tips, explained through figures, are the forte of this book. Contains specialty work from leading authorities in the field, like Thomas P. Sculco, Douglas A. Dennis and Javad Parvizi. Uses "My trolley" concept, which pictorially explains usage of critical tools, to make art of Primary Hip & Knee Replacement an enjoyable experience. Videos accessible through EEB Shelf App on Radiological Planning in THA | Tips and Pearls in THA | TKA in Stiff Knee | Osteophytectomy for Varus TKR | Varus TKR-SMCL – Needling Technique | Subperiosteal Release of SMCL | Cementing in TKA | Patellar Resurfacing in TKA | Unicompartmental Knee Arthroplasty | Rotating Platform TKA | Tibial Bumpectomy for Varus TKR | Autologous Bone Graft Technique. New to this Edition: Chapter on "Varus Knee Deformities", six more Videos and additional pages to accommodate the demand to increase size of some vital Figures, which can clarify better.
Download or read book Total Hip Replacement written by Vaibhav Bagaria and published by BoD – Books on Demand. This book was released on 2018-11-07 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: The incidence of total hip arthroplasty is increasing in number because of successful outcomes. Although technically challenging, once mastered a hip replacement is one of the most gratifying surgeries for both patient and surgeon. This book covers some of the most important aspects of hip replacement surgery. These include preoperative planning, anesthesia, classification systems, management of proximal femur fractures, anterior approach, complications, and rehabilitation aspects of hip arthroplasty. The book is intended for arthroplasty surgeons, anesthetists, and physical therapists who will find the book useful in parts and as a whole if they deal with arthroplasty cases on a regular basis. Experience-based narration of various subjects by authors ensures that first-hand experience is passed on to readers in a simple, easy-to-understand manner.
Download or read book Preoperative Planning of Total Hip Arthroplasty written by Aamir H. Shaikh and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Preoperative planning is a crucial step towards a successful hip replacement. It is approached in five easy steps that includes a comprehensive history and examination, ordering weight bearing standardized radiographs, assessment of patients for fitness in the pre-assessment clinic, choosing the best implants as per individual case basis along with choosing method of implantation and templating the radiographs before starting the procedure to replicate the patient joint anatomy for the best patient outcome and to restore hip joint biomechanics. This further allows anticipating difficulties and pitfalls prior to surgery and thereby reducing the risk of complications associated with the hip replacement surgery.
Download or read book Modern Techniques in Total Hip Arthroplasty written by Ran Schwarzkopf and published by JP Medical Ltd. This book was released on 2014-03-20 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Step by step guide to hip arthroplasty for orthopaedic surgeons, covering every surgical approach for total hip replacement, from basic procedures to complex techniques. Written by recognised California-based expert Ran Schwarzkopf.
Download or read book Computer and Robotic Assisted Hip and Knee Surgery written by Anthony DiGioia and published by Oxford University Press. This book was released on 2004-11-04 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: The techniques of computer and robotic assisted surgery are making a major impact on the practice of orthopaedics. This book provides a complete overview of the technical and clinical aspects of computer-assisted surgery with extensive coverage of the use of robotic and navigation technologies in the surgical setting. The first part of the book presents the clinical problems and describes the basic technological components. The second part of the book describes specific applications in hip and knee reconstructive surgery.
Download or read book Outpatient Hip and Knee Replacement written by R. Michael Meneghini and published by Springer Nature. This book was released on 2023-04-18 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: Outpatient surgery and early discharge is the hottest topic in hip and knee arthroplasty and will continue to be in the coming years: It is expected that over 50% of all hip and knee arthroplasties will be performed in the outpatient setting by 2026. Currently, a central text that encompasses all of the unique aspects of performing hip and knee arthroplasty in the outpatient setting does not exist. Furthermore, as surgeons across the US and abroad are incentivized and encouraged by government and commercial payors, as well as patients, to perform these surgical procedures in the outpatient setting, the educational material must be available to disseminate the unique perioperative and surgical strategies and techniques accordingly. This book is unique in that it will address all the essential elements and considerations to promote surgeon success in this endeavor and enhance patient safety through the transition of hip and knee arthroplasty into the outpatient setting, as well as how to implement such a program into practice. Topics discussed include patient selection, medical optimization and risk management, anesthetic surgical techniques, pain management protocols, and postoperative physical therapy. Later chapters cover practical issues surrounding outcome metrics, discharge criteria, minimizing patient readmissions, financial considerations, and additional implications for hospitals, ASCs and payers. Filling a glaring gap in the literature on this popular new topic, Outpatient Joint Replacement is an ideal resource for orthopedic surgeons, notably hip and knee specialists, as well as residents, fellows and supporting clinical staff.
