Download or read book Development and Evolution of Software Architectures for Product Families written by Frank van der Linden and published by Springer. This book was released on 2003-08-06 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book originates from a workshop organised by ESPRIT project 20 477, ARES in Las Palmas de Gran Canaria, Spain, February 1998. ARES is an acronym for Architectural Reasoning for Embedded Systems. Within this project we investigate techniques to deal with problems of software architecture of families of embedded systems. It is the second workshop organised by this project. Its predecessor was held in Las Navas de Marques, Spain, November 1996. The proceedings of the first workshop are only available in electronic format at "http://www.dit.upm.es/~ares/". The second workshop succeeded, even more than the first one, in gathering many of the most prominent people working in the area of software architecture for product families or product lines. This second workshop consisted of six sessions. The first session was meant to report the ARES results, according to the topics of the next five sessions. The remaining sessions dealt with different aspects of software architecture, focussed on applications for product families or product lines. Because there will be a separate book covering all ARES results, the first session is not included in this book. The workshop was chaired by Henk Obbink from Philips Research and Paul Clements from the Software Engineering Institute at Carnegie Mellon University. They prepared and presented an overall conclusion at the end of the workshop. This conclusion was used in the introduction to this book.

Download or read book Software Architectures for Product Families written by Frank van der Linden and published by Springer. This book was released on 2003-06-29 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of a third workshop on the theme of Software Arc- tecture for Product Families. The first two workshops were organised by the ESPRIT project ARES, and were called “Development and Evolution of Software Architectures for Product Families”. Proceedings of the first workshop, held in November 1996, were only published electronically at: “http://www.dit.upm.es/~ares/”. Proceedings of the second workshop, held in February 1998, were published as Springer LNCS 1429. The ARES project was finished in February 1999. Several partners continued - operation in a larger consortium, ITEA project 99005, ESAPS. As such it is part of the European Eureka ! 2023 programme. The third workshop was organised as part of the ESAPS project. In order to make the theme of the workshop more generic we decided to rename it “International Workshop on Software Architectures for Product Families”. As with the earlier two workshops we managed to bring together people working in the so- ware architecture of product families and in software product-line engineering. Submitted papers were grouped in five sessions. Moreover, we introduced two s- sions, one on configuration management and one on evolution, because we felt that d- cussion was needed on these topics, but there were no submitted papers for these subjects. Finally, we introduced a surveys session, giving an overview of the present situation in Europe, focussed on ESAPS, and in the USA, focussed on the SEI Product Line Systems Program.

Download or read book Software Architectures for Product Families written by Frank van der Linden and published by Springer. This book was released on 2003-06-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of a third workshop on the theme of Software Arc- tecture for Product Families. The first two workshops were organised by the ESPRIT project ARES, and were called “Development and Evolution of Software Architectures for Product Families”. Proceedings of the first workshop, held in November 1996, were only published electronically at: “http://www.dit.upm.es/~ares/”. Proceedings of the second workshop, held in February 1998, were published as Springer LNCS 1429. The ARES project was finished in February 1999. Several partners continued - operation in a larger consortium, ITEA project 99005, ESAPS. As such it is part of the European Eureka ! 2023 programme. The third workshop was organised as part of the ESAPS project. In order to make the theme of the workshop more generic we decided to rename it “International Workshop on Software Architectures for Product Families”. As with the earlier two workshops we managed to bring together people working in the so- ware architecture of product families and in software product-line engineering. Submitted papers were grouped in five sessions. Moreover, we introduced two s- sions, one on configuration management and one on evolution, because we felt that d- cussion was needed on these topics, but there were no submitted papers for these subjects. Finally, we introduced a surveys session, giving an overview of the present situation in Europe, focussed on ESAPS, and in the USA, focussed on the SEI Product Line Systems Program.

Download or read book Development and Evolution of Software Architectures for Product Families written by Frank van der Linden and published by . This book was released on 2014-09-12 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Software Architecture for Product Families written by Mehdi Jazayeri and published by Addison Wesley Longman. This book was released on 2000 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software development organizations are now discovering the efficiencies that can be achieved by architecting entire software product families together. In Software Architecture for Product Families, experts from one of the world's most advanced software domain engineering projects share in-depth insights about the techniques that work -- and those that don't. The book offers a solutions-oriented, case-study approach covering the entire development lifecycle, based on advanced work done by three of Europe's leading technology companies and their academic partners. Discover the challenges that drive companies to consider architecting product families, and the new problems they encounter in doing so. Master concepts and terms that can be used to describe the architecture of a product family; then learn how to assess that architecture, and transform it into working applications. The authors also present chapter-length, real-world case studies of domain engineering projects at Nokia, Philips, and ABB.

Download or read book Software Product Lines written by Patrick Donohoe and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: Software product lines are emerging as a critical new paradigm for software development. Product lines are enabling organizations to achieve impressive time-to-market gains and cost reductions. With the increasing number of product lines and product-line researchers and practitioners, the time is right for a comprehensive examination of the issues surrounding the software product line approach. The Software Engineering Institute at Carnegie Mellon University is proud to sponsor the first conference on this important subject. This book comprises the proceedings of the First Software Product Line Conference (SPLC1), held August 28-31, 2000, in Denver, Colorado, USA. The twenty-seven papers of the conference technical program present research results and experience reports that cover all aspects of software product lines. Topics include business issues, enabling technologies, organizational issues, and life-cycle issues. Emphasis is placed on experiences in the development and fielding of product lines of complex systems, especially those that expose problems in the design, development, or evolution of software product lines. The book will be essential reading for researchers and practitioners alike.

Download or read book Software Product Lines written by Henk Obbink and published by Springer Science & Business Media. This book was released on 2005-09-15 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 9th International Software Product Line Conference, SPLC 2005, held in Rennes, France in September 2005, emanating from the merger of the former events SPLC (Software Product Line Conference started 2000 in the USA) and PFE (Product Family Engineering started 1996 in Europe). The 17 revised full technical papers presented together with 3 short research papers and 2 keynote talks were carefully reviewed and selected for inclusion in the book. The papers are organized in topical sections on keynotes, feature modelling, re-engineering, short papers, strategies, panels, validation, scoping and architecture, and product derivation.

Download or read book On the Move to Meaningful Internet Systems OTM 2009 Workshops written by Robert Meersman and published by Springer. This book was released on 2009-11-06 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: Internet-based information systems, the second covering the large-scale in- gration of heterogeneous computing systems and data resources with the aim of providing a global computing space. Eachofthesefourconferencesencouragesresearcherstotreattheirrespective topics within a framework that incorporates jointly (a) theory, (b) conceptual design and development, and (c) applications, in particular case studies and industrial solutions. Following and expanding the model created in 2003, we again solicited and selected quality workshop proposals to complement the more “archival” nature of the main conferences with research results in a number of selected and more “avant-garde” areas related to the general topic of Web-based distributed c- puting. For instance, the so-called Semantic Web has given rise to several novel research areas combining linguistics, information systems technology, and ar- ?cial intelligence, such as the modeling of (legal) regulatory systems and the ubiquitous nature of their usage. We were glad to see that ten of our earlier s- cessful workshops (ADI, CAMS, EI2N, SWWS, ORM, OnToContent, MONET, SEMELS, COMBEK, IWSSA) re-appeared in 2008 with a second, third or even ?fth edition, sometimes by alliance with other newly emerging workshops, and that no fewer than three brand-new independent workshops could be selected from proposals and hosted: ISDE, ODIS and Beyond SAWSDL. Workshop - diences productively mingled with each other and with those of the main c- ferences, and there was considerable overlap in authors.

Download or read book Software Product Family Engineering written by Frank van der Linden and published by Springer. This book was released on 2003-07-31 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the Fourth International Workshop on Product Family Engineering, PFE-4, held in Bilbao, Spain, October 3–5, 2001. This workshop was the fourth in a series started in 1996, with the same s- ject, software product-family engineering. Proceedings of the second and third workshops have been published as LNCS 1429 and LNCS 1951. The workshops were organized within co-operation projects of European - dustry, the ?rst two by ARES (Esprit IV 20.477) 1995–1999. This project had three industrial and three academic partners, and focused on software archit- turesforproductfamilies.SomeofthepartnerscontinuedinITEAproject99005, ESAPS(1999–2001).ITEAisthesoftwaredevelopmentprogram(?!2023)within the European Eureka initiative. ITEA projects last for two years and ESAPS ́ was succeeded by CAFE (ITEA ip00004), which started in 2001 and will t- minate in 2003. This workshop was initially prepared within ESAPS and the ́ preparation continued in CAFE. Due to the attacks in the USA of September 11, several people were not able to ?y and therefore did not show up. However, we have included their submissions in these proceedings. The session chair presented these submissions, and their inputs were used during the discussions. It was planned that Henk Obbink be workshop chair, and Linda Northrop and Sergio Bandinelli be co-chairs. However, because of personal circumstances Henk Obbink was not able to leave home during the workshop. Moreover both co-chairs had already enough other duties. Therefore the chairing duties were taken over by the program chair, Frank van der Linden.

Download or read book Product Focused Software Process Improvement written by Frank Bomarius and published by Springer Science & Business Media. This book was released on 2005-06 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th International Conference on Product Focused Software Process Improvement, PROFES 2005, held in Oulu, Finland in June 2005. The 44 revised full papers presented were carefully reviewed and selected and constitute a balanced mix of academic and industrial aspects. The papers are organized in topical sections on software process improvement, software quality, mobile and wireless applications, requirements engineering, industrial experiences, process analysis, process modeling, SPI methods and tools, experimental software engineering, validation and verification, agile methods, and measurement.

Download or read book Generative and Component Based Software Engineering written by Greg Butler and published by Springer. This book was released on 2003-06-30 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-proceedings of the Second International Symposium on Generative and Component-Based Software Engineering, GCSE 2000, held in Erfurt, Germany in October 2000.The twelve revised full papers presented with two invited keynote papers were carefully reviewed and selected from 29 submissions. The book offers topical sections on aspects and patterns, models and paradigms, components and architectures, and Mixin-based composition and metaprogramming.

Download or read book Domain Specific Languages written by Andrzej Wąsowski and published by Springer Nature. This book was released on 2023-03-05 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the theory and the pragmatics of using and engineering high-level software languages – also known as modeling or domain-specific languages (DSLs) – for creating quality software. This includes methods, design patterns, guidelines, and testing practices for defining the syntax and the semantics of languages. While remaining close to technology, the book covers multiple paradigms and solutions, avoiding a particular technological silo. It unifies the modeling, the object-oriented, and the functional-programming perspectives on DSLs. The book has 13 chapters. Chapters 1 and 2 introduce and motivate DSLs. Chapter 3 kicks off the DSL engineering lifecycle, describing how to systematically develop abstract syntax by analyzing a domain. Chapter 4 addresses the concrete syntax, including the systematic engineering of context-free grammars. Chapters 5 and 6 cover the static semantics – with basic constraints as a starting point and type systems for advanced DSLs. Chapters 7 (Transformation), 8 (Interpretation), and 9 (Generation) describe different paradigms for designing and implementing the dynamic semantics, while covering testing and other kinds of quality assurance. Chapter 10 is devoted to internal DSLs. Chapters 11 to 13 show the application of DSLs and engage with simpler alternatives to DSLs in a highly distinguished domain: software variability. These chapters introduce the underlying notions of software product lines and feature modeling. The book has been developed based on courses on model-driven software engineering (MDSE) and DSLs held by the authors. It aims at senior undergraduate and junior graduate students in computer science or software engineering. Since it includes examples and lessons from industrial and open-source projects, as well as from industrial research, practitioners will also find it a useful reference. The numerous examples include code in Scala 3, ATL, Alloy, C#, F#, Groovy, Java, JavaScript, Kotlin, OCL, Python, QVT, Ruby, and Xtend. The book contains as many as 277 exercises. The associated code repository facilitates learning and using the examples in a course.

Download or read book Encyclopedia of Library and Information Science written by Allen Kent and published by CRC Press. This book was released on 2002-06-04 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This supplement covers topics ranging from academic library funding to visual information querying.

Download or read book Software Reuse Advances in Software Reusability written by William B. Frakes and published by Springer. This book was released on 2004-02-02 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th International Conference on Software Reuse, ICSR-6, held in Vienna, Austria, in June 2000. The 26 revised full papers presented were carefully reviewed and selected from numerous submissions. The book is divided into topical sections on generative reuse and formal description languages, object-oriented methods, product line architectures, requirements reuse and business modeling, components and libraries, and design patterns.

Download or read book Software Architecture written by Flavio Oquendo and published by Springer. This book was released on 2004-05-26 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last decade has been one of great progress in the field of software architecture research and practice. Software architecture has emerged as an important subdis- pline of software engineering. A key aspect of the design of any software system is its architecture, i. e. the fundamental organization of a system embodied in its com- nents, their relationships to each other, and to the environment, and the principles guiding its design and evolution (as defined in the Recommended Practice for Arc- tectural Description of Software-Intensive Systems -- IEEE Std 1471-2000). - The First European Workshop on Software Architecture (EWSA 2004) provided an international forum for researchers and practitioners from academia and industry to discuss a wide range of topics in the area of software architecture, and to jointly f- mulate an agenda for future research in this field. EWSA 2004 distinguished among three types of papers: research papers (which describe authors’ novel research work), experience papers (which describe real-world experiences related to software architectures), and position papers (which present concise arguments about a topic of software architecture research or practice). The Program Committee selected 19 papers (9 research papers, 4 experience - pers, and 6 position papers) out of 48 submissions from 16 countries (Australia, B- zil, Canada, Chile, Finland, France, Germany, Italy, Japan, Korea, The Netherlands, Spain, Switzerland, Turkey, UK, USA). All submissions were reviewed by three members of the Program Committee.

Download or read book Software Architectures for Product Families written by Frank van der Linden and published by . This book was released on 2014-01-15 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Artificial Intelligence Applications for Improved Software Engineering Development New Prospects written by Meziane, Farid and published by IGI Global. This book was released on 2009-07-31 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book provides an overview of useful techniques in artificial intelligence for future software development along with critical assessment for further advancement"--Provided by publisher.