Download or read book Development and Characterization of Inviscid Melt Spun IMS Alumina based Ceramic Fiber Reinforced Composites written by Yun-Mo Sung and published by . This book was released on 1994 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1996 with total page 1628 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineered Materials Abstracts written by and published by . This book was released on 1995-04 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Development and Characterization of Novel Alumina Based Ceramic Matrix Composites for Energy Efficiency Sliding Applications written by Rajeshwari S. Lakshmi Paluri and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Friction, wear, and lubrication have direct influence on performance, reliability, and service life of mechanical systems with moving components. The useful life of these systems and their efficiency can be improved by improving the surface properties/ performance at sliding interfaces. Further, the usage of materials for sliding systems is limited in extreme environments, such as high temperature, and space, etc., due to their limited surface properties. This thesis focuses on the development of a new class of composites with superior surface properties, i.e., low friction and high wear resistance for extreme environmental conditions. Alumina, a well understood material for its tribological performance, is a merit choice for applications where high wear resistance is required, such as pump bearings, seal rings, valve seats, piston components, gears, cutting tool inserts and artificial joints. We propose to develop a novel alumina based ceramic composite to enhance its surface and tribological properties using a powder compaction technique. The newly developed composites will be characterized by X-ray Diffraction (XRD), Fourier Transform Infrared spectroscope (FTIR), Optical microscope, Environmental Scanning Electron Microscope (E-SEM), Goniometer and Surface profilometer. In-situ formation of high temperature stable phases, effect of sintering temperature, and percentage of reinforcement on phase formation will be studied. Investigation of effect of sintering temperature and percentage of reinforcement on density, porosity, and grain size will be conducted. The composites will be characterized for their tribological properties (friction and wear). The mechanisms for modified friction and wear will be proposed. The process parameters and compositions will be optimized. XRD results confirmed the formation of Al18B4O33, and AlB2 and FTIR confirmed the presence of B2O3. Increase in sintering temperature and wt % of boron affected the porosity, grain size, and hardness of the composites. The coefficient of friction was lower for the composites compared to pure alumina ceramic. The coefficient of friction decreased with increase in sintering temperature. The wear mechanism was found to be micro-fracture using ESEM and SEM studies.
Download or read book American Doctoral Dissertations written by and published by . This book was released on 1994 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts Index written by and published by . This book was released on 1996 with total page 1634 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fiberglass and Glass Technology written by Frederick T. Wallenberger and published by Springer Science & Business Media. This book was released on 2009-11-27 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fiberglass and Glass Technology: Energy-Friendly Compositions and Applications provides a detailed overview of fiber, float and container glass technology with special emphasis on energy- and environmentally-friendly compositions, applications and manufacturing practices which have recently become available and continue to emerge. Energy-friendly compositions are variants of incumbent fiberglass and glass compositions that are obtained by the reformulation of incumbent compositions to reduce the viscosity and thereby the energy demand. Environmentally-friendly compositions are variants of incumbent fiber, float and container glass compositions that are obtained by the reformulation of incumbent compositions to reduce environmentally harmful emissions from their melts. Energy- and environmentally-friendly compositions are expected to become a key factor in the future for the fiberglass and glass industries. This book consists of two complementary sections: continuous glass fiber technology and soda-lime-silica glass technology. Important topics covered include: o Commercial and experimental compositions and products o Design of energy- and environmentally-friendly compositions o Emerging glass melting technologies including plasma melting o Fiberglass composite design and engineering o Emerging fiberglass applications and markets Fiberglass and Glass Technology: Energy-Friendly Compositions and Applications is written for researchers and engineers seeking a modern understanding of glass technology and the development of future products that are more energy- and environmentally-friendly than current products.
Download or read book Proceedings of the Norbert Kreidl Symposium written by Wolfram Höland and published by . This book was released on 1997 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics Briefs written by and published by . This book was released on 1993 with total page 1058 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Inorganic Fibers written by Frederick T. Wallenberger and published by Springer Science & Business Media. This book was released on 2011-04-27 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: F. T. Wallenberger This book serves as an introduction to advanced inorganic fibers and aims to support fundamental research, assist applied scientists and designers in industry, and facilitate materials science instruction in universities and colleges. Its three main sections deal with fibers which are derived from the vapor phase such as single crystal silicon whiskers or carbon nanotubes, from the liquid phase such as advanced glass and single crystal oxide fibers, and from solid precursor fibers such as carbon and ceramic fibers. Contents FIBERS FROM THE VAPOR, LIQUID AND SOLID PHASE 1.1 The most important phase isthe liquid phase 1.2 Afiber by any name isstill afiber 1.3 Biographic sketches ofthe authors 1.4 Acknowledgments CHAPTER 1 FIBERS FROM THE VAPOR, LIQUID AND SOLID PHASE F. T. Wallenberger The book describes advanced inorganic fibers, focuses on principles and concepts, analyzes experimental and commercial processes, and relates process variables to structures, structures tofiber properties and fiber properties to end-use performance. In principle, there are discontinuous or inherently short, and continuous or potentially endless, fibers. Short fibers range from asbestos fibers, which were described as early as 300 BC to carbon nanotubes which were discovered in 1991 [1] and have been fully described in 1999 [2].
Download or read book High Performance Composites Commonalty of Phenomena written by K. K. Chawla and published by . This book was released on 1994 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ceramic Abstracts written by and published by . This book was released on 2000 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Characterization and Application of Calcia alumina Binary Metal Oxide Fiber Formed by Inviscid Melt Spinning IMS written by Kyung-Yol Yon and published by . This book was released on 1993 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SAMPE Quarterly written by Society for the Advancement of Material and Process Engineering and published by . This book was released on 1991 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Ceramics written by M. Bengisu and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: A handy reference for technicians who want to understand the nature, properties and applications, of engineering ceramics. The book meets the needs of those working in the ceramics industry, as well as of technicians and engineers involved in the application of ceramic materials.
Download or read book Submolecular Glass Chemistry and Physics written by Philip J. Bray and published by . This book was released on 1991 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: