Download or read book Reconfigurable Manufacturing Systems From Design to Implementation written by Lyes Benyoucef and published by Springer Nature. This book was released on 2019-10-19 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops innovative techniques from operational research and management science for the design and implementation of a reconfigurable manufacturing system (RMS), and subsequently analyzes and assesses their performance. A reconfigurable manufacturing system (RMS) is a paradigm that can address many of the challenges posed by the modern market. Accordingly, substantial research is now being conducted on RMS, focusing on various levels of decision-making (strategic, tactical and operational). However, as a relatively new research area, there are still only very few books and articles available on reconfigurable manufacturing system design and management. In addition to filling that gap, this book provides a forum for investigating, exchanging ideas on, and disseminating the latest advances in the broad area of RMS applications in today’s industry. Gathering contributions by experts from academia, industry and policy-making, it represents an essential contribution to the existing literature on manufacturing and logistics in general and industry 4.0 in particular.
Download or read book Reconfigurable Manufacturing Systems and Transformable Factories written by Anatoli I. Dashchenko and published by Springer Science & Business Media. This book was released on 2007-06-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dear reader! In your hand you have the second book from the series “XXI Century Techno- gies. ” The first book under the title “Manufacturing Technologies for Machines of the Future” was published by “Springer” in 2003. This book is aimed at solving one of the basic problems in the development of modern machine-building – working out of technologies and manufacturing equipment which would promote the continuous development and improvement of the final product design, rapidly “adaptable” to the requirements of the market as for the quantity, quality, and variety of products manufactured with the lowest cost and minimum time and labor of the product process. In this book the problems of theory and practice of development in the reconfigurable manufacturing systems and transformable factories for various machine-building branches with a focus on automotive industry are discussed. The problems concerning the development of a new class of production systems which in comparison to the flexible manufact- ing systems are composed of a far less quantity of machine-tools (reduced cost of production) are discussed. In comparison to the conventional automated lines (dedicated systems) they make it possible to rapidly transform the equipment for new products manufacturing. The book has some advantages concerning the art of scientific ideas and the presentation of developments.
Download or read book DEVELOPING A RECONFIGURABLE MANUFACTURING CONTROL SYSTEM written by J.L. CHIRN and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Developing a Reconfigurable Manufacturing Control System written by Jin-Lung Chirn and published by . This book was released on 2001 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reconfigurable Embedded Control Systems Applications for Flexibility and Agility written by Khalgui, Mohamed and published by IGI Global. This book was released on 2010-11-30 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book addresses the development of reconfigurable embedded control systems and describes various problems in this important research area, which include static and dynamic (manual or automatic) reconfigurations, multi-agent architectures, modeling and verification, component-based approaches, architecture description languages, distributed reconfigurable architectures, real-time and low power scheduling, execution models, and the implementation of such systems"--
Download or read book Changeable and Reconfigurable Manufacturing Systems written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2008-11-23 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: “Changeable and Reconfigurable Manufacturing Systems” discusses key strategies for success in the changing manufacturing environment. Changes can often be anticipated but some go beyond the design range, requiring innovative change enablers and adaptation mechanisms. The book presents the new concept of Changeability as an umbrella framework that encompasses paradigms such as agility, adaptability, flexibility and reconfigurability. It provides the definitions and classification of key terms in this new field, and emphasizes the required physical/hard and logical/soft change enablers. The book presents cutting edge technologies and the latest research, as well as future directions to help manufacturers stay competitive. It contains original contributions and results from senior international experts, together with industrial applications. The book serves as a comprehensive reference for professional engineers, managers, and academics in manufacturing, industrial and mechanical engineering.
Download or read book Process Planning Optimization in Reconfigurable Manufacturing Systems written by Farayi Musharavati and published by Universal-Publishers. This book was released on 2010-09 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: To date, reconfigurable manufacturing systems (RMSs) are among the most effective manufacturing styles that can offer manufacturers an alternative way of facing up to the challenges of continual changes in production requirements within the global, competitive and dynamic manufacturing environments. However, availability of optimal process plans that are suitable for reconfigurable manufacturing is one of the key enablers - yet to be fully unlocked - for realizing the full benefits of true RMSs. To unlock the process planning key and advance the state of art of reconfigurable manufacturing in the manufacturing industry, a number of questions need to be answered: (i) what decision making models and (ii) what computational techniques, can be applied to provide optimal manufacturing process planning solutions that are suitable for logical reconfiguration in manufacturing systems? To answer these questions, you must understand how to model reconfigurable manufacturing activities in an optimization perspective. You must also understand how to develop and select appropriate optimization techniques for solving process planning problems in manufacturing systems. To this end, Process Planning Optimization in Reconfigurable Manufacturing Systems covers: the design and operation of RMSs, optimal process planning modelling for reconfigurable manufacturing and the design and implementation of heuristic algorithm design techniques. The author explores how to: model optimization problems, select suitable optimization techniques, develop optimization algorithms, comparatively analyze the performance of candidate metaheuristics and how to investigate the effects of optimal process planning solutions on operating levels in manufacturing systems. This book delineates five alternative heuristic algorithm design techniques based on simulated annealing, genetic algorithms and the boltzmann machine that are tasked to solve manufacturing process planning optimization problems in RMSs. After reading this book, you will understand: how a reconfigurable manufacturing system works, the different types of manufacturing optimization problems associated with reconfigurable manufacturing, as well as the conventional and intelligent techniques that are suitable for solving process planning optimization problems. You will also be able to develop and implement effective optimization procedures and algorithms for a wide spectrum of optimization problems in design and reconfigurable manufacturing."
Download or read book A Distributed Coordination Approach to Reconfigurable Process Control written by Nirav Chokshi and published by Springer Science & Business Media. This book was released on 2007-11-21 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Success in the continuous process industries depends upon the ability to adapt to the demands of global supply chains in real-time. Thus, process plants must be designed to be easily reconfigured as and when necessary. “A Distributed Coordination Approach to Reconfigurable Process Control” presents research that addresses this issue, via developing a new distributed framework that will enable the building of a process control system that is capable of reconfigurability. This framework views the process as a set of readily-integrated, modular process elements, which operate relatively independently and are each supported by a degree of stand-alone decision-making capability. The rationale and benefits of moving towards the new approach is demonstrated by means of a worked example of a real process plant. The research will also help end-users to gain an understanding of the economic aspects of material flows across their plants, and the ways in which their processes can be integrated across the enterprise.
Download or read book Reconfigurable Manufacturing Systems written by Lyes Benyoucef and published by . This book was released on 2020 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops innovative techniques from operational research and management science for the design and implementation of a reconfigurable manufacturing system (RMS), and subsequently analyzes and assesses their performance. A reconfigurable manufacturing system (RMS) is a paradigm that can address many of the challenges posed by the modern market. Accordingly, substantial research is now being conducted on RMS, focusing on various levels of decision-making (strategic, tactical and operational). However, as a relatively new research area, there are still only very few books and articles available on reconfigurable manufacturing system design and management. In addition to filling that gap, this book provides a forum for investigating, exchanging ideas on, and disseminating the latest advances in the broad area of RMS applications in todays industry. Gathering contributions by experts from academia, industry and policy-making, it represents an essential contribution to the existing literature on manufacturing and logistics in general and industry 4.0 in particular.
Download or read book Computer Control of Manufacturing Systems written by Yoram Koren and published by . This book was released on 1983 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reconfigurable Manufacturing System written by Gerardus Blokdyk and published by Createspace Independent Publishing Platform. This book was released on 2018-04-03 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt: What are the Essentials of Internal Reconfigurable manufacturing system Management? Is the Reconfigurable manufacturing system organization completing tasks effectively and efficiently? Is a Reconfigurable manufacturing system Team Work effort in place? How can we improve Reconfigurable manufacturing system? How can you measure Reconfigurable manufacturing system in a systematic way? Defining, designing, creating, and implementing a process to solve a challenge or meet an objective is the most valuable role... In EVERY group, company, organization and department. Unless you are talking a one-time, single-use project, there should be a process. Whether that process is managed and implemented by humans, AI, or a combination of the two, it needs to be designed by someone with a complex enough perspective to ask the right questions. Someone capable of asking the right questions and step back and say, 'What are we really trying to accomplish here? And is there a different way to look at it?' This Self-Assessment empowers people to do just that - whether their title is entrepreneur, manager, consultant, (Vice-)President, CxO etc... - they are the people who rule the future. They are the person who asks the right questions to make Reconfigurable manufacturing system investments work better. This Reconfigurable manufacturing system All-Inclusive Self-Assessment enables You to be that person. All the tools you need to an in-depth Reconfigurable manufacturing system Self-Assessment. Featuring 710 new and updated case-based questions, organized into seven core areas of process design, this Self-Assessment will help you identify areas in which Reconfigurable manufacturing system improvements can be made. In using the questions you will be better able to: - diagnose Reconfigurable manufacturing system projects, initiatives, organizations, businesses and processes using accepted diagnostic standards and practices - implement evidence-based best practice strategies aligned with overall goals - integrate recent advances in Reconfigurable manufacturing system and process design strategies into practice according to best practice guidelines Using a Self-Assessment tool known as the Reconfigurable manufacturing system Scorecard, you will develop a clear picture of which Reconfigurable manufacturing system areas need attention. Your purchase includes access details to the Reconfigurable manufacturing system self-assessment dashboard download which gives you your dynamically prioritized projects-ready tool and shows your organization exactly what to do next. Your exclusive instant access details can be found in your book.
Download or read book Reconfigurable Manufacturing Enterprises for Industry 4 0 written by Ibrahim H. Garbie and published by CRC Press. This book was released on 2021-08-26 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to support readers facing the urgency, challenges, analysis, and methodologies to reconfiguration. It presents a comprehensive framework for reconfiguring manufacturing enterprises and provides a set of valuable conceptual frameworks and methodologies for analyzing, evaluating, and assessing reconfiguration indices. This book offers practical guidance for implementing the Fourth Industrial Revolution (Industry 4.0). It presents open-ended problems pertaining to the concepts covered in the book and provides a new approach for reconfiguring industrial systems. Not only is this book for industrialists and academics, it will also appeal to undergraduate and graduate students studying industrial, mechanical, and manufacturing engineering. Scholars and practitioners in operations management will also find this book of interest.
Download or read book System Modeling and Control with Resource Oriented Petri Nets written by MengChu Zhou and published by CRC Press. This book was released on 2018-09-03 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petri nets are widely used in modeling, analysis, and control of discrete event systems arising from manufacturing, transportation, computer and communication networks, and web service systems. However, Petri net models for practical systems can be very large, making it difficult to apply such models to real-life problems. System Modeling and Control with Resource-Oriented Petri Nets introduces a new resource-oriented Petri net (ROPN) model that was developed by the authors. Not only does it successfully reduce model size, but it also offers improvements that facilitate effective modeling, analysis, and control of automated and reconfigurable manufacturing systems. Presenting the latest research in this novel approach, this cutting-edge volume provides proven theories and methodologies for implementing cost and time-saving improvements to contemporary manufacturing systems. It provides effective tools for deadlock avoidance—deadlock-free routing and deadlock-free scheduling. The authors supply simple and complex industrial manufacturing system examples to illustrate time-tested concepts, theories, and approaches for solving real-life application problems. Written in a clear and concise manner, the text covers applications to automated and reconfigurable manufacturing systems, automated guided vehicle (AGV) systems, semiconductor manufacturing systems, and flexible assembly systems. Explaining complex concepts in a manner that is easy to understand, the authors provide the understanding and tools needed for more effective modeling, analysis, performance evaluation, control, and scheduling of engineering processes that will lead to more flexible and efficient manufacturing systems.
Download or read book Production and Manufacturing System Management Coordination Approaches and Multi Site Planning written by Renna, Paolo and published by IGI Global. This book was released on 2012-09-30 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book presents relevant theoretical frameworks and most recent research findings in this area, providing significant theories for research students and scholars to carry out their continuous research as well as practitioners who aim to improve upon their understanding of distributed production planning"--
Download or read book Design of Flexible Production Systems written by Tullio Tolio and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the last decade, the production of mechanical components to be assembled in final products produced in high volumes (e.g. cars, mopeds, industrial vehicles, etc.) has undergone deep changes due to the overall modifications in the way companies compete. Companies must consider competitive factors such as short lead times, tight product tolerances, frequent market changes and cost reduction. Anyway, companies often have to define production objectives as trade-offs among these critical factors since it can be difficult to improve all of them. Even if system flexibility is often considered a fundamental requirement for firms, it is not always a desirable characteristic of a system because it requires relevant investment cost which can jeopardize the profitability of the firm. Dedicated systems are not able to adapt to changes of the product characteristics while flexible systems offer more flexibility than what is needed, thus increasing investment and operative costs. Production contexts characterized by mid to high demand volume of well identified families of products in continuous evolution do not require the highest level of flexibility; therefore, manufacturing system flexibility must be rationalized and it is necessary to find out the best trade-off between productivity and flexibility by designing manufacturing systems endowed with the right level of flexibility required by the production problem. This new class of production systems can be named Focused Flexibility Manufacturing Systems-FFMSs. The flexibility degree in FFMSs is related to their ability to cope with volume, mix and technological changes, and it must take into account both present and future changes. The required level of system flexibility impacts on the architecture of the system and the explicit design of flexibility often leads to hybrid systems, i.e. automated integrated systems in which parts can be processed by both general purpose and dedicated machines. This is a key issue of FFMSs and results from the matching of flexibility and productivity that respectively characterize FMSs and Dedicated Manufacturing Systems (DMSs). The market share of the EU in the machine tool sector is 44%; the introduction of focused flexibility would be particularly important for machine tool builders whose competitive advantage is based on the ability of customizing their systems on the basis of needs of their customers. In fact, even if current production contexts frequently present situations which would fit well with the FFMS approach, tradition and know-how of machine tool builders play a crucial role. Firms often agree with the focused flexibility vision, nevertheless they decide not to pay the risk and efforts related to the design of this new system architecture. This is due also to the lack of well-structured design approaches which can help machine tool builders to configure innovative systems. Therefore, the FFMS topic is studied through the book chapters following a shared mission: "To define methodologies and tools to design production systems with a minimum level of flexibility needed to face, during their lifecycle, the product and process evolution both in the technological and demand aspects. The goal is to find out the optimal trade-off between flexibility and productivity". The book framework follows the architecture which has been developed to address the FFMS Design problem. This architecture is both broad and detailed, since it pays attention to all the relevant levels in a firm hierarchy which are involved in the system design. Moreover, the architecture is innovative because it models both the point of view of the machine tool builder and the point of view of the system user. The architecture starts analyzing Manufacturing Strategy issues and generating the possible demand scenario to be faced. Technological aspects play a key role while solving process plan problems for the products in the part family. Strategic and technological data becomes input when a machine tool builder performs system configuration. The resulting system configurations are possible solutions that a system user considers when planning its system capacity. All the steps of the architecture are deeply studied, developing methods and tools to address each subproblem. Particular attention is paid to the methodologies adopted to face the different subproblems: mathematical programming, stochastic programming, simulation techniques and inverse kinematics have been used. The whole architecture provides a general approach to implement the right degree of flexibility and it allows to study how different aspects and decisions taken in a firm impact on each other. The work presented in the book is innovative because it gives links among different research fields, such as Manufacturing Strategy, Process Plan, System Design, Capacity Planning and Performance Evaluation; moreover, it helps to formalize and rationalize a critical area such as manufacturing system flexibility. The addressed problem is relevant at an academic level but, also, at an industrial level. A great deal of industrial sectors need to address the problem of designing systems with the right degree of flexibility; for instance, automotive, white goods, electrical and electronic goods industries, etc. Attention to industrial issues is confirmed by empirical studies and real case analyses which are presented within the book chapters.
Download or read book Collaborative Design and Planning for Digital Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2009-01-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative design has attracted much attention in the research community in recent years. With increasingly decentralized manufacturing systems and processes, more collaborative approaches and systems are needed to support distributed manufacturing operations. "Collaborative Design and Planning for Digital Manufacturing" presents a focused collection of quality chapters on the state-of-the-art research efforts in the area of collaborative design and planning, as well as their practical applications towards digital manufacturing. "Collaborative Design and Planning for Digital Manufacturing" provides both a broad-based review of the key areas of research in digital manufacturing, and an in-depth treatment of particular methodologies and systems, from collaborative design to distributed planning, monitoring and control. Recent development and innovations in this area provide a pool of focused research efforts, relevant to a wide readership from academic researchers to practicing engineers.
Download or read book Fault Diagnosis and Reconfiguration in Flight Control Systems written by C. Hajiyev and published by Springer Science & Business Media. This book was released on 2013-12-01 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problem of fault diagnosis and reconfigurable control is a new and actually developing field of science and engineering. The subject becomes more interesting since there is an increasing demand for the navigation and control systems of aerospace vehicles, automated actuators etc. to be more safe and reliable. Nowadays, the problems of fault detection and isolation and reconfigurable control attract the attention the scientists in the world. The subject is emphasized in the recent international congresses such as IF AC World Congresses (San Francisco-1996, Beijing-1999, and Barcelona-2002) and lMEKO World Congresses (Tampere-1997, Osaka-1999, Vienna-2000), and also in the international conferences on fault diagnosis such as SAFEPROCESS Conferences (Hull-1997, Budapest-2000). The presented methods in the book are based on linear and nonlinear dynamic mathematical models of the systems. Technical objects and systems stated by these models are very large, and include various control systems, actuators, sensors, computer systems, communication systems, and mechanical, hydraulic, pneumatic, electrical and electronic devices. The analytical fault diagnosis techniques of these objects have been developed for several decades. Many of those techniques are based on the use of the results of modem control theory. This is natural, because it is known that fault diagnosis process in control systems is considered as a part of general control process. xxii In organization of fault diagnosis of control systems, the use of the concepts and methods of modem control theory including concepts of state space, modeling, controllability, observability, estimation, identification, and filtering is very efficient.
