Download or read book Contemporary Planetary Robotics written by Yang Gao and published by John Wiley & Sons. This book was released on 2016-06-03 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: For readers from both academia and industry wishing to pursue their studies and /or careers in planetary robotics, this book represents a one-stop tour of the history, evolution, key systems, and technologies of this emerging field. The book provides a comprehensive introduction to the key techniques and technologies that help to achieve autonomous space systems for cost-effective, high performing planetary robotic missions. Main topics covered include robotic vision, surface navigation, manipulation, mission operations and autonomy, being explained in both theoretical principles and practical use cases. The book recognizes the importance of system design hence discusses practices and tools that help take mission concepts to baseline design solutions, making it a practical piece of scientific reference suited to a variety of practitioners in planetary robotics.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automation in Warehouse Development written by Roelof Hamberg and published by Springer Science & Business Media. This book was released on 2011-10-28 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: The warehouses of the future will come in a variety of forms, but with a few common ingredients. Firstly, human operational handling of items in warehouses is increasingly being replaced by automated item handling. Extended warehouse automation counteracts the scarcity of human operators and supports the quality of picking processes. Secondly, the development of models to simulate and analyse warehouse designs and their components facilitates the challenging task of developing warehouses that take into account each customer’s individual requirements and logistic processes. Automation in Warehouse Development addresses both types of automation from the innovative perspective of applied science. In particular, it describes the outcomes of the Falcon project, a joint endeavour by a consortium of industrial and academic partners. The results include a model-based approach to automate warehouse control design, analysis models for warehouse design, concepts for robotic item handling and computer vision, and autonomous transport in warehouses. Automation in Warehouse Development is targeted at both academic researchers and industrial practitioners. It provides state-of-the art research on warehouse automation and model-based warehouse design. These topics have been addressed from a systems engineering perspective by researchers from different disciplines including software, control, and mechanical engineering, with a clear focus on the industrial applications of their research.
Download or read book Control and Monitoring of Chemical Batch Reactors written by Fabrizio Caccavale and published by Springer Science & Business Media. This book was released on 2010-12-07 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemical Batch Reactor is aimed at tackling the above problems from a blending of academic and industrial perspectives. Advanced solutions (i.e., those based on recent research results) to the four fundamental problems of modeling, identification, control and fault diagnosis for batch processes are developed in detail in four distinct chapters. In each chapter, a general overview of foundational concepts is also given, together with a review of recent and classical literature on the various subjects. To provide a unitary treatment of the different topics and give a firm link to the underlying practical applications, a single case study is developed as the book progresses; a batch process of industrial interest, i.e., the phenol-formaldehyde reaction for the production of phenolic resins, is adopted to test the various techniques developed. In this way, a roadmap of the solutions to fundamental problems, ranging from the early stages of the production process to the complete design of control and diagnosis systems, is provided for both industrial practitioners and academic researchers.
Download or read book A Mathematical Introduction to Robotic Manipulation written by Richard M. Murray and published by CRC Press. This book was released on 2017-12-14 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Mathematical Introduction to Robotic Manipulation presents a mathematical formulation of the kinematics, dynamics, and control of robot manipulators. It uses an elegant set of mathematical tools that emphasizes the geometry of robot motion and allows a large class of robotic manipulation problems to be analyzed within a unified framework. The foundation of the book is a derivation of robot kinematics using the product of the exponentials formula. The authors explore the kinematics of open-chain manipulators and multifingered robot hands, present an analysis of the dynamics and control of robot systems, discuss the specification and control of internal forces and internal motions, and address the implications of the nonholonomic nature of rolling contact are addressed, as well. The wealth of information, numerous examples, and exercises make A Mathematical Introduction to Robotic Manipulation valuable as both a reference for robotics researchers and a text for students in advanced robotics courses.
Download or read book Software Architectures for Humanoid Robotics written by Lorenzo Natale and published by Frontiers Media SA. This book was released on 2018-10-11 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SemProM written by Wolfgang Wahlster and published by Springer Science & Business Media. This book was released on 2013-03-26 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of low-cost, compact digital storage, sensors and radio modules allows us to embed digital memories into products to record key events. Such computationally enhanced products can perceive and control their environment, analyze their observations, and communicate with other smart objects and human users. Digital product memories (DPMs) will play a key role in the upcoming fourth industrial revolution based on cyber-physical production systems, resulting in improvements in traceability and quality assurance, more efficient and flexible production, logistics, customization, and recycling, and better information for the consumer. SemProM was a major industrial and academic research project that examined all aspects of the design and implementation of semantic product memories, and this book is a comprehensive assessment of the results achieved. The introductory chapters explain the fundamental ideas and the organization of the related project, while the remaining parts explain how to build, model and process DPMs, multimodal interaction using them, and selected applications. This work is inherently multidisciplinary and the related ideas, technologies, and implementations draw on results in fields such as semantic technologies, machine-to-machine communication, intelligent sensor networks, instrumented environments, embedded systems, smart objects, RFID technology, security, and privacy. The contributing authors are leading scientists and engineers, representing key academic teams and companies. The book explains successful deployment in applications such as manufacturing, green logistics, retail, healthcare, and food distribution, and it will be of value to both researchers and practitioners.
Download or read book Robotics Research written by Tamim Asfour and published by Springer Nature. This book was released on 2022-02-17 with total page 1023 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers that were presented at the 17th International Symposium of Robotics Research (ISRR). The ISRR promotes the development and dissemination of groundbreaking research and technological innovation in robotics useful to society by providing a lively, intimate, forward-looking forum for discussion and debate about the current status and future trends of robotics with great emphasis on its potential role to benefit humankind. The symposium contributions contained in this book report on a variety of new robotics research results covering a broad spectrum organized into the categories: design, control; grasping and manipulation, planning, robot vision, and robot learning.
Download or read book Informatics in Control Automation and Robotics written by Oleg Gusikhin and published by Springer. This book was released on 2019-04-18 with total page 827 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses the latest endeavours relating researches and developments conducted in fields of Control, Robotics and Automation. Through more than twenty revised and extended articles, the present book aims to provide the most up-to-date state-of-art of the aforementioned fields allowing researcher, PhD students and engineers not only updating their knowledge but also benefiting from the source of inspiration that represents the set of selected articles of the book. The deliberate intention of editors to cover as well theoretical facets of those fields as their practical accomplishments and implementations offers the benefit of gathering in a same volume a factual and well-balanced prospect of nowadays research in those topics. A special attention toward “Intelligent Robots and Control” may characterize another benefit of this book.
Download or read book Handling Uncertainty and Networked Structure in Robot Control written by Lucian Bușoniu and published by Springer. This book was released on 2016-02-06 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on two challenges posed in robot control by the increasing adoption of robots in the everyday human environment: uncertainty and networked communication. Part I of the book describes learning control to address environmental uncertainty. Part II discusses state estimation, active sensing, and complex scenario perception to tackle sensing uncertainty. Part III completes the book with control of networked robots and multi-robot teams. Each chapter features in-depth technical coverage and case studies highlighting the applicability of the techniques, with real robots or in simulation. Platforms include mobile ground, aerial, and underwater robots, as well as humanoid robots and robot arms. Source code and experimental data are available at http://extras.springer.com. The text gathers contributions from academic and industry experts, and offers a valuable resource for researchers or graduate students in robot control and perception. It also benefits researchers in related areas, such as computer vision, nonlinear and learning control, and multi-agent systems.
Download or read book Distributed Autonomous Robotic Systems 8 written by Hajime Asama and published by Springer Science & Business Media. This book was released on 2009-05-15 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Symposia on Distributed Autonomous Robotic Systems (DARS) started at Riken, Japan in 1992. Since then, the DARS symposia have been held every two years: in 1994 and 1996 in Japan (Riken, Wako), in 1998 in Germany (Karlsruhe), in 2000 in the USA (Knoxville, TN), in 2002 in Japan (Fukuoka), in 2004 in France (Toulouse), and in 2006 in the USA (Minneapolis, MN). The 9th DARS symposium, which was held during November 17–19 in T- kuba, Japan, hosted 84 participants from 13 countries. The 48 papers presented there were selected through rigorous peer review with a 50% acceptance ratio. Along with three invited talks, they addressed the spreading research fields of DARS, which are classifiable along two streams: theoretical and standard studies of DARS, and interdisciplinary studies using DARS concepts. The former stream includes multi-robot cooperation (task assignment methodology among multiple robots, multi-robot localization, etc.), swarm intelligence, and modular robots. The latter includes distributed sensing, mobiligence, ambient intelligence, and mul- agent systems interaction with human beings. This book not only offers readers the latest research results related to DARS from theoretical studies to application-oriented ones; it also describes the present trends of this field. With the diversity and depth revealed herein, we expect that DARS technologies will flourish soon.
Download or read book Computer Control Abstracts written by and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Robotic Manipulation written by Matthew T. Mason and published by MIT Press. This book was released on 2001-06-08 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: The science and engineering of robotic manipulation. "Manipulation" refers to a variety of physical changes made to the world around us. Mechanics of Robotic Manipulation addresses one form of robotic manipulation, moving objects, and the various processes involved—grasping, carrying, pushing, dropping, throwing, and so on. Unlike most books on the subject, it focuses on manipulation rather than manipulators. This attention to processes rather than devices allows a more fundamental approach, leading to results that apply to a broad range of devices, not just robotic arms. The book draws both on classical mechanics and on classical planning, which introduces the element of imperfect information. The book does not propose a specific solution to the problem of manipulation, but rather outlines a path of inquiry.
Download or read book Learning in Embedded Systems written by Leslie Pack Kaelbling and published by MIT Press. This book was released on 1993 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learning to perform complex action strategies is an important problem in the fields of artificial intelligence, robotics and machine learning. Presenting interesting, new experimental results, Learning in Embedded Systems explores algorithms that learn efficiently from trial and error experience with an external world. The text is a detailed exploration of the problem of learning action strategies in the context of designing embedded systems that adapt their behaviour to a complex, changing environment. Such systems include mobile robots, factory process controllers and long-term software databases.
Download or read book Probabilistic Robotics written by Sebastian Thrun and published by MIT Press. This book was released on 2005-08-19 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to the techniques and algorithms of the newest field in robotics. Probabilistic robotics is a new and growing area in robotics, concerned with perception and control in the face of uncertainty. Building on the field of mathematical statistics, probabilistic robotics endows robots with a new level of robustness in real-world situations. This book introduces the reader to a wealth of techniques and algorithms in the field. All algorithms are based on a single overarching mathematical foundation. Each chapter provides example implementations in pseudo code, detailed mathematical derivations, discussions from a practitioner's perspective, and extensive lists of exercises and class projects. The book's Web site, www.probabilistic-robotics.org, has additional material. The book is relevant for anyone involved in robotic software development and scientific research. It will also be of interest to applied statisticians and engineers dealing with real-world sensor data.
Download or read book Transdisciplinary Engineering Methods for Social Innovation of Industry 4 0 written by M. Peruzzini and published by IOS Press. This book was released on 2018-09-14 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of concurrent engineering (CE) was first developed in the 1980s. Now often referred to as transdiciplinary engineering, it is based on the idea that different phases of a product life cycle should be conducted concurrently and initiated as early as possible within the Product Creation Process (PCP). The main goal of CE is to increase the efficiency and effectiveness of the PCP and reduce errors in later phases, as well as incorporating considerations – including environmental implications – for the full lifecycle of the product. It has become a substantive methodology in many industries, and has also been adopted in the development of new services and service support. This book presents the proceedings of the 25th ISPE Inc. International Conference on Transdisciplinary Engineering, held in Modena, Italy, in July 2018. This international conference attracts researchers, industry experts, students, and government representatives interested in recent transdisciplinary engineering research, advancements and applications. The book contains 120 peer-reviewed papers, selected from 259 submissions from all continents of the world, ranging from the theoretical and conceptual to papers addressing industrial best practice, and is divided into 11 sections reflecting the themes addressed in the conference program and addressing topics as diverse as industry 4.0 and smart manufacturing; human-centered design; modeling, simulation and virtual design; and knowledge and data management among others. With an overview of the latest research results, product creation processes and related methodologies, this book will be of interest to researchers, design practitioners and educators alike.
Download or read book Documentation Abstracts written by and published by . This book was released on 1993 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:
