Download or read book Shock Wave Science and Technology Reference Library Vol 5 written by Blaine Asay and published by Springer Science & Business Media. This book was released on 2009-12-16 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: Los Alamos National Laboratory is an incredible place. It was conceived and born amidst the most desperate of circumstances. It attracted some of the most brilliant minds, the most innovative entrepreneurs, and the most c- ative tinkerers of that generation. Out of that milieu emerged physics and engineering that beforehand was either unimagined, or thought to be f- tasy. One of the ?elds essentially invented during those years was the science of precision high explosives. Before 1942, explosives were used in munitions and commercial pursuits that demanded proper chemistry and con?nement for the necessary e?ect, but little else. The needs and requirements of the Manhattan project were of a much more precise and speci?c nature. Spatial and temporal speci?cations were reduced from centimeters and milliseconds to micrometers and nanoseconds. New theory and computational tools were required along with a raft of new experimental techniques and novel ways of interpreting the results. Over the next 40 years, the emphasis was on higher energy in smaller packages, more precise initiation schemes, better and safer formulations, and greater accuracy in forecasting performance. Researchers from many institutions began working in the emerging and expanding ?eld. In the midst of all of the work and progress in precision initiation and scienti?c study, in the early 1960s, papers began to appear detailing the ?rst quantitative studies of the transition from de?agration to detonation (DDT), ?rst in cast, then in pressed explosives, and ?nally in propellants.

Download or read book Shock Compression of Condensed Matter 2005 written by Michael D. Furnish and published by American Institute of Physics. This book was released on 2006-08-24 with total page 842 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter, Baltimore, Maryland USA, 2005. The volume embodies the most recent research on shock compression of condensed matter and includes 363 plenary, invited, and contributed papers, all peer-reviewed. Topics include: equations of state, phase transitions, chemical reactions, warm dense matter, fracture, geophysics and planetary science, energetic materials, optical studies, and more.

Download or read book Numerical Modeling of Explosives and Propellants written by Charles L. Mader and published by CRC Press. This book was released on 2007-10-18 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major advances, both in modeling methods and in the computing power required to make those methods viable, have led to major breakthroughs in our ability to model the performance and vulnerability of explosives and propellants. In addition, the development of proton radiography during the last decade has provided researchers with a major new experimental tool for studying explosive and shock wave physics. Problems that were once considered intractable – such as the generation of water cavities, jets, and stems by explosives and projectiles – have now been solved. Numerical Modeling of Explosives and Propellants, Third Edition provides a complete overview of this rapidly emerging field, covering basic reactive fluid dynamics as well as the latest and most complex methods and findings. It also describes and evaluates Russian contributions to the experimental explosive physics database, which only recently have become available. This book comes with downloadable resources that contain— · FORTRAN and executable computer codes that operate under Microsoft® Windows Vista operating system and the OS X operating system for Apple computers · Windows Vista and MAC compatible movies and PowerPoint presentations for each chapter · Explosive and shock wave databases generated at the Los Alamos National Laboratory and the Russian Federal Nuclear Centers Charles Mader’s three-pronged approach – through text, computer programs, and animations – imparts a thorough understanding of new computational methods and experimental measuring techniques, while also providing the tools to put these methods to effective use.

Download or read book Shock Wave Phenomena and the Properties of Condensed Matter written by Gennady I. Kanel and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the main goals of investigations of shock-wave phenomena in condensed matter is to develop methods for predicting effects of explosions, high-velocity collisions, and other kinds of intense dynamic loading of materials and structures. Based on the results of international research conducted over the past 30 years, this book is addressed not only to experts in shock-wave physics, but also to interested representatives from adjacent fields of activity and to students who seek an introduction to the current issues.

Download or read book Los Alamos Shock Wave Profile Data written by Charles E. Morris and published by Univ of California Press. This book was released on 1982-01-01 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Shock Wave Compression of Condensed Matter written by Jerry W Forbes and published by Springer Science & Business Media. This book was released on 2013-02-01 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the core concepts of the shock wave physics of condensed matter, taking a continuum mechanics approach to examine liquids and isotropic solids. The text primarily focuses on one-dimensional uniaxial compression in order to show the key features of condensed matter’s response to shock wave loading. The first four chapters are specifically designed to quickly familiarize physical scientists and engineers with how shock waves interact with other shock waves or material boundaries, as well as to allow readers to better understand shock wave literature, use basic data analysis techniques, and design simple 1-D shock wave experiments. This is achieved by first presenting the steady one-dimensional strain conservation laws using shock wave impedance matching, which insures conservation of mass, momentum and energy. Here, the initial emphasis is on the meaning of shock wave and mass velocities in a laboratory coordinate system. An overview of basic experimental techniques for measuring pressure, shock velocity, mass velocity, compression and internal energy of steady 1-D shock waves is then presented. In the second part of the book, more advanced topics are progressively introduced: thermodynamic surfaces are used to describe equilibrium flow behavior, first-order Maxwell solid models are used to describe time-dependent flow behavior, descriptions of detonation shock waves in ideal and non-ideal explosives are provided, and lastly, a select group of current issues in shock wave physics are discussed in the final chapter.

Download or read book Shock Wave Science and Technology Reference Library Vol 3 written by Yasuyuki Horie and published by Springer Science & Business Media. This book was released on 2008-09-18 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the second volume of Solids Volumes in theShockWaveScience and Technology Reference Library. These volumes are primarily concerned with high-pressure shock waves in solid media, including detonation and hi- velocity impact and penetration events. This volume contains four articles. The ?rst two describe the reactive behavior of condensed-phase explosives, and the remaining two discuss the inert, mechanical response of solid materials. The articles are each se- contained, and can be read independently of each other. They o?er a timely reference, for beginners as well as professional scientists and engineers, cov- ing the foundations and the latest progress, and include burgeoning devel- ment as well as challenging unsolved problems. The ?rst chapter, by S. She?eld and R. Engelke, discusses the shock initiation and detonation phenomena of solids explosives. The article is an outgrowth of two previous review articles: “Explosives” in vol. 6 of En- clopedia of Applied Physics (VCH, 1993) and “Initiation and Propagation of Detonation in Condensed-Phase High Explosives” in High-Pressure Shock Compression of Solids III (Springer, 1998). This article is not only an - dated review, but also o?ers a concise heuristic introduction to shock waves and condensed-phase detonation. The authors emphasize the point that d- onation is not an uncontrollable, chaotic event, but that it is an orderly event that is governed by and is describable in terms of the conservation of mass, momentum, energy and certain material-speci?c properties of the explosive.

Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 922 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings written by and published by . This book was released on 1989 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt: Papers presented in this publication cover special problems in the field of energetic materials, particularly detonation phenomena in solids and liquids. General subject areas include shock-to-detonation transition, time resolved chemistry, initiation modeling, deflagration-to-detonation transition, equation of state and equation of state and performance, composites and emulsions, and composites and emulsions/underwater explosives, reaction zone, detonation wave propagation, hot spots, detonation products, chemistry and compositions, and special initiation.

Download or read book High Pressure Shock Compression of Solids III written by Lee Davison and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in experimental methods are providing an increasingly detailed understanding of shock compression phenomena on the bulk, intermediate, and molecular scales. This third volume in a series of reviews of the curent state of knowledge covers several diverse areas. The first group of chapters addresses fundamental physical and chemical aspects of the response of condensed matter to shock comression: equations of state, molecular-dynamic analysis, deformation of materials, spectroscopic methods. Two further chapters focus on a particular group of materials: ceramics. Another chapter discusses shock-induced reaction of condensed-phase explosives. And a final pair of chapters considers shock phenomena at low stresses from the point of view of continuum mechanics.

Download or read book Shock Compression of Condensed Matter 1991 written by S.C. Schmidt and published by Elsevier. This book was released on 2016-07-29 with total page 1103 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers collected together in this volume constitute a review of recent research on the response of condensed matter to dynamic high pressures and temperatures. Inlcuded are sections on equations of state, phase transitions, material properties, explosive behavior, measurement techniques, and optical and laser studies. Recent developments in this area such as studies of impact and penetration phenomenology, the development of materials, especially ceramics and molecular dynamics and Monte Carlo simulations are also covered. These latest advances, in addition to the many other results and topics covered by the authors, serve to make this volume the most authoritative source for the shock wave physics community.

Download or read book Shock Compression of Condensed Matter 2003 written by Michael D. Furnish and published by . This book was released on 2004 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: Two volumes contain 350 papers presented at the 13th Biennial International Conference of the APS Topical Group on Shock Compression of Condensed Matter (Portland, Oregon, July 2003). One of the three plenary lectures was given by James Asay (Institute for Shock Physics, Washington State U., Pullman, Washington) on wave structure studies in condensed matter physics. The papers in v.1 address nonenergetic materials; energetic materials; phase transitions; the modeling, simulation, theory, and molecular dynamics modeling of nonreactive and reactive materials; spall, fracture, and fragmentation; constitutive and microstructural properties of metals; mechanical properties of polymers and composites; and mechanical properties of ceramics, glasses, ionic solids, and liquids. The largest number of papers in v.2 are under the headings mechanical properties of reactive materials; detonation and burn phenomena; explosive and initiation studies; experimental techniques; and geophysics, structures, and medical applications. The contributors represent 14 countries, where they work in state and private industry and academic settings. Indexed by both author and subject. Annotation :2004 Book News, Inc., Portland, OR (booknews.com).

Download or read book Dynamic Damage and Fragmentation written by David Edward Lambert and published by John Wiley & Sons. This book was released on 2019-01-03 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering structures may be subjected to extreme high-rate loading conditions, like those associated with natural disasters (earthquakes, tsunamis, rock falls, etc.) or those of anthropic origin (impacts, fluid–structure interactions, shock wave transmissions, etc.). Characterization and modeling of the mechanical behavior of materials under these environments is important in predicting the response of structures and improving designs. This book gathers contributions by eminent researchers in academia and government research laboratories on the latest advances in the understanding of the dynamic process of damage, cracking and fragmentation. It allows the reader to develop an understanding of the key features of the dynamic mechanical behavior of brittle (e.g. granular and cementitious), heterogeneous (e.g. energetic) and ductile (e.g. metallic) materials.

Download or read book ERDA Energy Research Abstracts written by United States. Energy Research and Development Administration and published by . This book was released on 1976 with total page 756 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Chemistry at Extreme Conditions written by M.R. Manaa and published by Elsevier. This book was released on 2005-03-02 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemistry at Extreme Conditions covers those chemical processes that occur in the pressure regime of 0.5–200 GPa and temperature range of 500–5000 K and includes such varied phenomena as comet collisions, synthesis of super-hard materials, detonation and combustion of energetic materials, and organic conversions in the interior of planets. The book provides an insight into this active and exciting field of research. Written by top researchers in the field, the book covers state of the art experimental advances in high-pressure technology, from shock physics to laser-heating techniques to study the nature of the chemical bond in transient processes. The chapters have been conventionally organised into four broad themes of applications: biological and bioinorganic systems; Experimental works on the transformations in small molecular systems; Theoretical methods and computational modeling of shock-compressed materials; and experimental and computational approaches in energetic materials research.* Extremely practical book containing up-to-date research in high-pressure science * Includes chapters on recent advances in computer modelling* Review articles can be used as reference guide

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1996-02 with total page 668 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Emerging Technology in Fluids Structures and Fluid structure Interactions 2004 written by and published by . This book was released on 2004 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: