Download or read book Detonability of Hydrocarbon Air Mixtures Using Combustion Enhancing Geometries for Pulse Detonation Engines written by Neil G. Sexton and published by . This book was released on 2001-06 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research studied combustion enhancing geometries and shock reflection on generating a hydrocarbon/air detonation wave in a combustion tube. Ethylene was used as a baseline fuel to determine the preferable geometries. Propane was then used in later testing because of its combustion similarities with heavy hydrocarbon fuels such JP5, JP8, and JP10. Three criteria were used to measure the effectiveness of the combustion enhancing geometries: ability to generate a detonation, wave speed, and time for shock formation. The evaluated geometries included flow-restricting orifice plates and a Schelkin spiral. The shock reflection was accomplished by a vertical fence (large orifice) placed in the last fourth of the tube length. The optimum geometry was found to be the orifice plate used in conjunction with the spiral. Detonations occurred when using ethylene in this configuration, but did not develop when using propane. Because propane's overall reaction rate is slower than that of simpler fuels, more large- and small-scale turbulence to further enhance combustion needs to be generated to create a detonation wave in a short distance when using complex hydrocarbons, such as propane.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1967-09 with total page 1340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Combustion Engineering written by Kenneth W. Ragland and published by CRC Press. This book was released on 2011-05-06 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion Engineering, Second Edition maintains the same goal as the original: to present the fundamentals of combustion science with application to today's energy challenges. Using combustion applications to reinforce the fundamentals of combustion science, this text provides a uniquely accessible introduction to combustion for undergraduate stud
Download or read book Gaseous and Heterogeneous Detonations written by Gabriel D. Roy and published by . This book was released on 1999 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Prevention of Hazardous Fires and Explosions written by V.E. Zarko and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Besides its obvious destructive potential, military R&D also serves to protect human lives, equipment and facilities against the effects of weapons. Concepts have therefore been developed that improve safety of stationary and mobile facilities against pressure waves, thermal radiation and fire. Effective, fast fire extinguishing equipment has been designed for tank compartments and motors. Closed buildings are demolished and landmines are removed with gas and dust explosions. Stringent safety requirements have been developed for the production of ammunition and explosives. Military and related industries have accumulated a vast knowledge and sophisticated experience that are very valuable in a variety of civil applications. The knowledge is based on theoretical and experimental research work, the origin of which sometimes dates back many centuries. It has often been classified and therefore has remained unknown to the civilian population, until now.
Download or read book Detonation Control for Propulsion written by Jiun-Ming Li and published by Springer. This book was released on 2017-12-05 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the latest developments in detonation engines for aerospace propulsion, with a focus on the rotating detonation engine (RDE). State-of-the-art research contributions are collected from international leading researchers devoted to the pursuit of controllable detonations for practical detonation propulsion. A system-level design of novel detonation engines, performance analysis, and advanced experimental and numerical methods are covered. In addition, the world’s first successful sled demonstration of a rocket rotating detonation engine system and innovations in the development of a kilohertz pulse detonation engine (PDE) system are reported. Readers will obtain, in a straightforward manner, an understanding of the RDE & PDE design, operation and testing approaches, and further specific integration schemes for diverse applications such as rockets for space propulsion and turbojet/ramjet engines for air-breathing propulsion. Detonation Control for Propulsion: Pulse Detonation and Rotating Detonation Engines provides, with its comprehensive coverage from fundamental detonation science to practical research engineering techniques, a wealth of information for scientists in the field of combustion and propulsion. The volume can also serve as a reference text for faculty and graduate students and interested in shock waves, combustion and propulsion.
Download or read book Emerging Energetic Materials Synthesis Physicochemical and Detonation Properties written by Dabir S. Viswanath and published by Springer. This book was released on 2018-01-02 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes science and technology of a new generation of high-energy andinsensitive explosives. The objective is to provide professionals with comprehensiveinformation on the synthesis and the physicochemical and detonation properties ofthe explosives. Potential technologies applicable for treatment of contaminated wastestreams from manufacturing facilities and environmental matrices are also be included.This book provides the reader an insight into the depth and breadth of theoreticaland empirical models and experimental techniques currently being developed in thefield of energetic materials. It presents the latest research by DoD engineers andscientists, and some of DoD’s academic and industrial researcher partners. The topicsexplored and the simulations developed or modified for the purposes of energetics mayfind application in other closely related fields, such as the pharmaceutical industry.One of the key features of the book is the treatment of wastewaters generated duringmanufacturing of these energetic materials.
Download or read book Elements of Industrial Hazards written by Ratan Raj Tatiya and published by CRC Press. This book was released on 2010-12-01 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introductory course on Health, Safety and Environment (HSE) as applicable to all manufacturing and exploration engineering industries. Its first part deals with fundamentals, ecology and environmental engineering and covers air and water pollution sources, magnitude, measuring techniques and remedial measures to minimize them. The second pa
Download or read book Toward Detonation Theory written by Anatoly N. Dremin and published by Springer Science & Business Media. This book was released on 1999-06-04 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is known that the Chapman-Jouguet theory of detonation is based on the assumption of an instantaneous and complete transformation of explosives into detonation products in the wave front. Therefore, one should not expect from the theory any interpretations of the detonation limits, such as shock initiation of det onation and kinetic instability and propagation (failure diameter). The Zeldovich-Von Neuman-Doring (ZND) theory of detonation appeared, in fact, as a response to the need for a theory capable of interpreting such limits, and the ZND detonation theory gave qualitative interpretations to the detonation limits. These interpretations were based essentially on the theoretical notion that the mechanism of explosives transformation at detonation is a combustion of a layer of finite thickness of shock-compressed explosive behind the wave shock front with the velocity of the front. However, some experimental findings turned out to be inconsistent with the the ory. A very small change of homogeneous (liquid) explosives detonation velocity with explosive charge diameter near the rather sizable failure diameter is one of the findings. The elucidation of the nature of this finding has led to the discovery of a new phenomenon. This phenomenon has come to be known as the breakdown (BD) of the explosive self-ignition behind the front of shock waves under the effect of rarefaction waves.
Download or read book Fundamentals of Gas Dynamics written by Howard W. Emmons and published by Princeton University Press. This book was released on 2015-12-08 with total page 784 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume II of the High Speed Aerodynamics and Jet Propulsion series. The series which stress the more fundamental aspects of the various phenomena that make up the broad field of aeronautical science. The aerodynamicist and gas dynamicist will find both the classical and the important new concepts of gas dynamics presented in an informative and stimulating manner. Specialists in the study of gas dynamics have contributed Sections as follows: H. S. Tsien, The Equations of Gas Dynamics; L. Crocco, One-Dimensional Treatment of Steady Gas Dynamics; A. Kantrowitz, One-Dimensional Treatment of Nonsteady Gas Dynamics; W. Hayes, The Basic Theory of Gasdynamic Discontinuities; H. Polachek and R. J. Seeger, Shock Wave Interactions; H. G. Stever, Condensation Phenomena in High Speed Flows; T. H. Von Karman, H. W. Emmons, G. I. Taylor, and R. S. Tankin, Gas Dynamics of Combustion and Detonation; S. Schaaf and P. Chambre, Flow of Rarefied Gases. Originally published in 1958. The Princeton Legacy Library uses the latest print-on-demand technology to again make available previously out-of-print books from the distinguished backlist of Princeton University Press. These editions preserve the original texts of these important books while presenting them in durable paperback and hardcover editions. The goal of the Princeton Legacy Library is to vastly increase access to the rich scholarly heritage found in the thousands of books published by Princeton University Press since its founding in 1905.
Download or read book Hydrogen Storage Technologies written by Agata Godula-Jopek and published by John Wiley & Sons. This book was released on 2012-07-05 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of current and possible future hydrogen storage technologies, written from an industrial perspective. The book describes the fundamentals, taking into consideration environmental, economic and safety aspects, as well as presenting infrastructure requirements, with a special focus on hydrogen applications in production, transportation, military, stationary and mobile storage. A comparison of the different storage technologies is also included, ranging from storage of pure hydrogen in different states, via chemical storage right up to new materials already under development. Throughout, emphasis is placed on those technologies with the potential for commercialization.
Download or read book High Energy Materials written by Jai Prakash Agrawal and published by John Wiley & Sons. This book was released on 2015-11-20 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Authored by an insider with over 40 years of high energy materials (HEMs) experience in academia, industry and defense organizations, this handbook and ready reference covers all important HEMs from the 1950s to the present with their respective properties and intended purposes. Written at an attainable level for professionals, engineers and technicians alike, the book provides a comprehensive view of the current status and suggests further directions for research and development. An introductory chapter on the chemical and thermodynamic basics allows the reader to become acquainted with the fundamental features of explosives, before moving on to the important safety aspects in processing, handling, transportation and storage of high energy materials. With its collation of results and formulation strategies hitherto scattered in the literature, this should be on the shelf of every HEM researcher and developer.
Download or read book Dynamics of Combustion Systems written by A. K. Oppenheim and published by Springer Science & Business Media. This book was released on 2008-08-29 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Dynamics of Combustion Systems are presented in three parts in this book. Together they provide a step towards the automatic control of explosions. The exothermic character of combustion systems, their fluid dynamic features, and explosive nature, are covered by this work which also provides a technical monograph for readers with some background in combustion technology. The book is likely to appeal to graduate students, and researchers in academia and industry.
Download or read book Process Safety Calculations written by Renato Benintendi and published by Elsevier. This book was released on 2017-10-31 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Safety Calculations is an essential guide for process safety engineers involved in calculating and predicting risks and consequences. The book focuses on calculation procedures based on basic chemistry, thermodynamics, fluid dynamics, conservation equations, kinetics and practical models. This book provides helpful calculations to demonstrate compliance with regulations and standards. Standards such as Seveso directive(s)/COMAH, CLP regulation, ATEX directives, PED directives, REACH regulation, OSHA/NIOSH and UK ALARP are covered, along with risk and consequence assessment, stoichiometry, thermodynamics, stress analysis and fluid-dynamics. - Includes realistic engineering models with validation from CFD modeling and/or industry testing - Provides an introduction into basic principles that govern process relationships in modern industry - Helps the reader find and apply the right principles to the specific problem being solved, mitigated or validated
Download or read book Principles of Turbomachinery written by Dennis G. Shepherd and published by Simon & Schuster Books For Young Readers. This book was released on 1956 with total page 494 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer Equipment written by Don W. Green and published by McGraw Hill Professional. This book was released on 2007-10-26 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Get Cutting-Edge Coverage of All Chemical Engineering Topics— from Fundamentals to the Latest Computer Applications First published in 1934, Perry's Chemical Engineers' Handbook has equipped generations of engineers and chemists with an expert source of chemical engineering information and data. Now updated to reflect the latest technology and processes of the new millennium, the Eighth Edition of this classic guide provides unsurpassed coverage of every aspect of chemical engineering-from fundamental principles to chemical processes and equipment to new computer applications. Filled with over 700 detailed illustrations, the Eighth Edition of Perry's Chemcial Engineering Handbook features: Comprehensive tables and charts for unit conversion A greatly expanded section on physical and chemical data New to this edition: the latest advances in distillation, liquid-liquid extraction, reactor modeling, biological processes, biochemical and membrane separation processes, and chemical plant safety practices with accident case histories Inside This Updated Chemical Engineering Guide - Conversion Factors and Mathematical Symbols • Physical and Chemical Data • Mathematics • Thermodynamics • Heat and Mass Transfer • Fluid and Particle Dynamics Reaction Kinetics • Process Control • Process Economics • Transport and Storage of Fluids • Heat Transfer Equipment • Psychrometry, Evaporative Cooling, and Solids Drying • Distillation • Gas Absorption and Gas-Liquid System Design • Liquid-Liquid Extraction Operations and Equipment • Adsorption and Ion Exchange • Gas-Solid Operations and Equipment • Liquid-Solid Operations and Equipment • Solid-Solid Operations and Equipment • Size Reduction and Size Enlargement • Handling of Bulk Solids and Packaging of Solids and Liquids • Alternative Separation Processes • And Many Other Topics!
Download or read book Ram Accelerators written by Kazuyoshi Takayama and published by Springer. This book was released on 2012-03-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ram accelerators are among the most advanced tools for generating fluid dynamcis data in supersonic reacting systems. They require the combined action of combustion, wave systems and turbulence and are still a serious challenge for physicists and engineers. This book will serve as an introductionary textbook on ram accelerators and gives a thorough overview on research activities, performance modeling and high-pressure detonation dynamics.
