Download or read book Deterministic Safety Analysis for Nuclear Power Plants written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2019-09-24 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deterministic safety analysis is an essential component of safety assessment, particularly for safety demonstration of the design of nuclear power plants (NPPs). The objective of deterministic safety analysis is to confirm that safety functions can be fulfilled and that the necessary structures, systems and components, in combination with operator actions, are effective in keeping the releases of radioactive material from the plant below acceptable limits. Deterministic safety analysis, supplemented by further specific information and analysis, including probabilistic safety analysis, is also intended to demonstrate that the source term and the potential radiological consequences of different plant states are acceptable, and that the possibility of certain conditions arising that could lead to an early or a large radioactive release can be considered as 'practically eliminated'. The publication has been updated to maintain consistency with current IAEA safety requirements and to reflect lessons from the Fukushima Daiichi accident. It takes into account current practices and experience from deterministic safety analyses for NPPs being performed around the world.
Download or read book Deterministic Safety Analysis for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2009 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this Safety Guide is to provide harmonized guidance to designers, operators, regulators and providers of technical support on deterministic safety analysis for nuclear power plants. It provides information on the utilization of the results of such analysis for safety and reliability improvements. The Safety Guide addresses conservative, best estimate and uncertainty evaluation approaches to deterministic safety analysis and is applicable to current and future designs. Contents: 1. Introduction; 2. Grouping of initiating events and associated transients relating to plant states; 3. Deterministic safety analysis and acceptance criteria; 4. Conservative deterministic safety analysis; 5. Best estimate plus uncertainty analysis; 6. Verification and validation of computer codes; 7. Relation of deterministic safety analysis to engineering aspects of safety and probabilistic safety analysis; 8. Application of deterministic safety analysis; 9. Source term evaluation for operational states and accident conditions; References.
Download or read book Risk and Safety Analysis of Nuclear Systems written by John C. Lee and published by John Wiley & Sons. This book was released on 2012-01-12 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book has been developed in conjunction with NERS 462, a course offered every year to seniors and graduate students in the University of Michigan NERS program. The first half of the book covers the principles of risk analysis, the techniques used to develop and update a reliability data base, the reliability of multi-component systems, Markov methods used to analyze the unavailability of systems with repairs, fault trees and event trees used in probabilistic risk assessments (PRAs), and failure modes of systems. All of this material is general enough that it could be used in non-nuclear applications, although there is an emphasis placed on the analysis of nuclear systems. The second half of the book covers the safety analysis of nuclear energy systems, an analysis of major accidents and incidents that occurred in commercial nuclear plants, applications of PRA techniques to the safety analysis of nuclear power plants (focusing on a major PRA study for five nuclear power plants), practical PRA examples, and emerging techniques in the structure of dynamic event trees and fault trees that can provide a more realistic representation of complex sequences of events. The book concludes with a discussion on passive safety features of advanced nuclear energy systems under development and approaches taken for risk-informed regulations for nuclear plants.
Download or read book Accident Analysis for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2002 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accident analysis is an important tool for confirming the adequacy and efficiency of provisions within the defence in depth concept for the safety of nuclear power plants (NPPs). The purpose of the report is to provide the necessary practical guidance for performing adequate accident analysis in the light of current good practice worldwide.
Download or read book Best Estimate Safety Analysis for Nuclear Power Plants written by and published by . This book was released on 2008 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deterministic safety analysis is an important tool for confirming the adequacy and efficiency of provisions within the defence in depth concept for the safety of nuclear power plants (NPPs). IAEA Safety Standards Series No. NS-R-1.2 and Safety Reports Series No. 23 recommend, as one of the options for demonstrating the inclusion of adequate safety margins, the use of best estimate computer codes with realistic input data in combination with the evaluation of uncertainties in the calculation results. The evaluation of uncertainties is an issue of considerable complexity, and this Safety Report has been developed to complement the existing publications. It provides more detailed information on the methods available for the evaluation of uncertainties in deterministic safety analysis of NPPs and practical guidance in the use of these methods.
Download or read book Deterministic Safety Analysis for Nuclear Power Plants written by IAEA and published by . This book was released on 2012-06-30 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this Safety Guide is to provide harmonized guidance to designers, operators, regulators and providers of technical support on deterministic safety analysis for nuclear power plants. It provides information on the utilization of the results of such analysis for safety and reliability improvements. The Safety Guide addresses conservative, best estimate and uncertainty evaluation approaches to deterministic safety analysis and is applicable to current and future designs.
Download or read book Deterministic Safety Analysis for Nuclear Power Plants written by IAEA (Corporate Author) and published by . This book was released on 2010 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this Safety Guide is to provide harmonized guidance to designers, operators, regulators and providers of technical support on deterministic safety analysis for nuclear power plants. It provides information on the utilization of the results of such analysis for safety and reliability improvements. The Safety Guide addresses conservative, best estimate and uncertainty evaluation approaches to deterministic safety analysis and is applicable to current and future designs. Contents: 1. Introduction; 2. Grouping of initiating events and associated transients relating to plant states.
Download or read book Safety of Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
Download or read book Basic Safety Principles for Nuclear Power Plants written by International Nuclear Safety Advisory Group and published by . This book was released on 1999 with total page 118 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present report is a revision of Safety Series No. 75-INSAG-3 (1988), updating the statements made on the objectives and principles of safe design and operation for electricity generating nuclear power plants. It includes the improvements made in the safety of operating nuclear power plants and identifies the principles underlying the best current safety policies to be applied in future plants. It presents INSAG's understanding of the principles underlying the best current safety policies and practices of the nuclear power industry.
Download or read book Best Estimate Safety Analysis for Nuclear Power Plants written by IAEA. and published by . This book was released on 2008 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Deterministic safety analysis is an important tool for confirming the adequacy and efficiency of provisions within the defence in depth concept for the safety of nuclear power plants (NPPs). IAEA Safety Standards Series No. NS-R-1.2 and Safety Reports Series No. 23 recommend, as one of the options for demonstrating the inclusion of adequate safety margins, the use of best estimate computer codes with realistic input data in combination with the evaluation of uncertainties in the calculation results. The evaluation of uncertainties is an issue of considerable complexity, and this Safety Report.
Download or read book The Role of Probabilistic Safety Assessment and Probabilistic Safety Criteria in Nuclear Power Plant Safety written by International Atomic Energy Agency and published by . This book was released on 1992 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: This safety report establishes guidelines on the role that probabilistic safety assessment can play as part of an overall safety assurance programme in nuclear power plants. It also describes a framework for probabilistic safety criteria (PSC) and provides guidance for the establishment of PSC values.
Download or read book Format and Content of the Safety Analysis Report for Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2004 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide is intended primarily for use with land based stationary thermal nuclear power plants but it may, in parts, have a wider applicability to other nuclear facilities. It provides recommendations and guidance on the possible format and content of a SAR in support of a request to the State regulatory body for authorization to construct and or operate a nuclear power plant. As such, it contains recommendations on meeting the requirements of Safety guide GS-R-1 "Legal and governmental infrastructure for nuclear, radioactive waste and transport safety" (2000, ISBN 9201008007)
Download or read book Design basis Accident Analysis Methods For Light water Nuclear Power Plants written by Robert Martin and published by World Scientific. This book was released on 2019-02-13 with total page 717 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures the principles of safety evaluation as practiced in the regulated light-water reactor nuclear industry, as established and stabilized over the last 30 years. It is expected to serve both the current industry and those planning for the future. The work's coverage of the subject matter is the broadest to date, including not only the common topics of modeling and simulation, but also methods supporting the basis for the underlying assumptions, the extension to radiological safety, what to expect in a licensing review, historical perspectives and the implication for new designs.This text is an essential resource for practitioners and students, on the current best-practices in nuclear power plant safety and their basis. Contributors of this work are subject matter experts in their specialties, much of which was nurtured and inspired by Prof. Larry Hochreiter, a prominent nuclear safety pioneer.Related Link(s)
Download or read book Nuclear Safety written by Gianni Petrangeli and published by Elsevier. This book was released on 2006-05-30 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Safety provides the methods and data needed to evaluate and manage the safety of nuclear facilities and related processes using risk-based safety analysis, and provides readers with the techniques to assess the consequences of radioactive releases. The book covers relevant international and regional safety criteria (US, IAEA, EUR, PUN, URD, INI). The contents deal with each of the critical components of a nuclear plant, and provide an analysis of the risks arising from a variety of sources, including earthquakes, tornadoes, external impact and human factors. It also deals with the safety of underground nuclear testing and the handling of radioactive waste. Covers all plant components and potential sources of risk including human, technical and natural factors. Brings together information on nuclear safety for which the reader would previously have to consult many different and expensive sources. Provides international design and safety criteria and an overview of regulatory regimes.
Download or read book Periodic Safety Review of Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2003 with total page 68 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides recommendations and guidance on conducting periodic safety review (PSR) of an existing nuclear power plant. PSR is a comprehensive safety review of all important aspects of safety, carried out at regular intervals, typically every ten years.
Download or read book Development and Application of Level 2 Probabilistic Safety Assessment for Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this Safety Guide is to provide recommendations for meeting the IAEA safety requirements in performing or managing a level 2 probabilistic safety assessment (PSA) project for a nuclear power plant; thus it complements the Safety Guide on level 1 PSA. One of the aims of this Safety Guide is to promote a standard framework, standard terms and a standard set of documents for level 2 PSAs to facilitate regulatory and external peer review of their results. It describes all elements of the level 2 PSA that need to be carried out if the starting point is a fully comprehensive level 1 PSA. Contents: 1. Introduction; 2. PSA project management and organization; 3. Identification of design aspects important to severe accidents and acquisition of information; 4. Interface with level 1 PSA: Grouping of sequences; 5. Accident progression and containment analysis; 6. Source terms for severe accidents; 7. Documentation of the analysis: Presentation and interpretation of results; 8. Use and applications of the PSA; References; Annex I: Example of a typical schedule for a level 2 PSA; Annex II: Computer codes for simulation of severe accidents; Annex III: Sample outline of documentation for a level 2 PSA study.
Download or read book Format and Content of the Safety Analysis Report for Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2024-04-24 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on the structure and content of the safety analysis report to be submitted by the operating organization to the regulatory body for authorization of the siting, construction, commissioning, operation and decommissioning of a nuclear power plant. It is intended to facilitate both the development of the safety analysis report by the operating organization and the checking of its completeness and adequacy by the regulatory body. The publication is a revision of IAEA Safety Standards Series No. GS-G-4.1, Format and Content of the Safety Analysis Report for Nuclear Power Plants, which it supersedes. The revision reflects feedback experience from the Fukushima Daiichi accident and the subsequent stress tests performed. It also describes good practices and experience from the use of safety analysis reports for newly built nuclear power plants in different States and informs on recent progress made in approaches to safety assessment.
