Download or read book Determination of the In place Hot mix Asphalt Layer Modulus for Rehabilitation Projects Using a Mechanistic empirical Procedure written by Amara Loulizi and published by . This book was released on 2006 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: This project evaluated the procedures proposed by the Mechanistic-Empirical Pavement Design Guide (MEPDG) to characterize existing hot-mix asphalt (HMA) layers for rehabilitation purposes. Thirty-three cores were extracted from nine sites in Virginia to measure their dynamic moduli in the lab. Falling-weight deflectometer (FWD) testing was performed at the sites because the backcalculated moduli are needed for the Level 1 procedure. The resilient modulus was also measured in the lab because it is needed for the Level 2 procedure. A visual pavement rating was performed based on pavement condition because it is needed for the Level 3 procedure. The selected cores were tested for their bulk densities (Gmb) using the AASHTO T166 procedure and then for their dynamic modulus in accordance with the AASHTO TP62-03 standard test method. Then the cores were broken down and tested for their maximum theoretical specific gravity (Gmm) using the AASHTO T-209 procedure. Finally an ignition test was performed to find the percentage of binder and to reclaim the aggregate for gradation analysis. Volumetric properties were then calculated and used as input for the Witczak dynamic modulus prediction equations to find what the MEPDG calls the undamaged master curve of the HMA layer. The FWD data, resilient modulus data, and pavement rating were used to find the damaged master curve of the HMA layer as suggested for input Levels 1, 2, and 3, respectively. It was found that the resilient modulus data needed for a Level 2 type of analysis do not represent the entire HMA layer thickness, and therefore it was recommended that this analysis should not be performed by VDOT when implementing the design guide. The use of Level 1 data is recommended because FWD testing appears to be the only procedure investigated that can measure the overall condition of the entire HMA layer.
Download or read book Asphalt Pavements written by Y. Richard Kim and published by CRC Press. This book was released on 2014-11-06 with total page 1966 pages. Available in PDF, EPUB and Kindle. Book excerpt: Asphalt Pavements contains the proceedings of the International Conference on Asphalt Pavements (Raleigh, North Carolina, USA, 1-5 June 2014), and discusses recent advances in theory and practice in asphalt materials and pavements. The contributions cover a wide range of topics:- Environmental protection and socio-economic impacts- Additives and mo
Download or read book The Roles of Accelerated Pavement Testing in Pavement Sustainability written by José P. Aguiar-Moya and published by Springer. This book was released on 2016-09-15 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: This compendium gathers the latest advances in the area of Accelerated Pavement Testing (APT), a means of testing full-scale pavement construction in an accelerated manner for structural deterioration in a very short term. Compiling novel research results presented at the 5th International Conference on Accelerated Pavement Testing, San Jose, Costa Rica, the volume serves as a timely and highly relevant resource for materials scientists and engineers interested in determining the performance of a pavement structure during its service life (10+ years) in a few weeks or months.
Download or read book Mechanistic empirical Pavement Design Guide written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2008 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Evaluation of Various Hot Mix Asphalt Pavement Thicknesses Over Rubblized Concrete Pavement written by Irene K. Battaglia and published by . This book was released on 2010 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Behavior of Asphalt Pavements written by Lijun Sun and published by Butterworth-Heinemann. This book was released on 2016-08-09 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Behavior of Asphalt Pavements provides engineers and researchers with a detailed guide to the structural behavioral dynamics of asphalt pavement including: pavement temperature distribution, mechanistic response of pavement structure under the application of heavy vehicles, distress mechanism of pavement, and pavement deterioration performance and dynamic equations. An authoritative guide for understanding the key mechanisms for creating longer lasting pavements, Structural Behavior of Asphalt Pavements describes the intrinsic consistency between macroscopic performance and microscopic response, structure and material, as well as global and local performances, and demonstrates the process of pavement analyses and designs, approaching science from empirical analyses. Analyzes the external and internal factors influencing pavement temperature field, and provide a review of existing pavement temperature prediction models Introduces a “Bridge Principle through which pavement performance and fatigue properties are consolidated Defines the intrinsic consistency between macroscopic performance and microscopic response, structure and material, as well as global and local performance Summaries the mechanistic response of pavement structure under the application of heavy vehicle, distress mechanism of pavement, pavement deterioration performance and dynamic equations, and life cycle analysis of pavement
Download or read book Guidelines for Implementing NCHRP 1 37A M E Design Procedures Literature review written by and published by . This book was released on 2009 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highway agencies across the nation are moving towards implementation of the new AASHTO Mechanistic-Empirical Pavement Design Guide (MEPDG) for pavement design. The benefits of implementing the MEPDG for routine use in Ohio includes (1) achieving more cost effective and reliable pavement designs, (2) lower initial and life cycle costs to the agency, and (3) reduced highway user impact due to lane closures for maintenance and rehabilitation of pavements. Implementation of the MEPDG is a process that requires time and agency resources (staffing, training, testing facilities including equipment, and so on). A key requirement is validating the MEPDG's nationally calibrated pavement distress and smoothness prediction models when applied under Ohio conditions and performing local calibration if needed. Feasibility of using the MEPDG's national models in Ohio was investigated under this study using data from a limited number of LTPP projects located in Ohio. Results based on limited data showed inadequate goodness of fit and significant bias in a number of the MEPDG new HMA pavement and JPCP performance prediction models. Limited recalibration of these models showed promising results indicating that a full-scale recalibration effort using a more extensive database assembled from projects located throughout the state is feasible.
Download or read book Performance Tests for Hot Mix Asphalt HMA Including Fundamental and Empirical Procedures written by Louay Nadhim Mohammad and published by ASTM International. This book was released on 2006 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the 5th International Symposium on Asphalt Pavements Environment APE written by Marco Pasetto and published by Springer Nature. This book was released on 2019-08-29 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume highlights the latest advances, innovations, and applications in the field of asphalt pavement technology, as presented by leading international researchers and engineers at the 5th International Symposium on Asphalt Pavements & Environment (ISAP 2019 APE Symposium), held in Padua, Italy on September 11-13, 2019. It covers a diverse range of topics concerning materials and technologies for asphalt pavements, designed for sustainability and environmental compatibility: sustainable pavement materials, marginal materials for asphalt pavements, pavement structures, testing methods and performance, maintenance and management methods, urban heat island mitigation, energy harvesting, and Life Cycle Assessment. The contributions, which were selected by means of a rigorous international peer-review process, present a wealth of exciting ideas that will open novel research directions and foster multidisciplinary collaboration among different specialists.
Download or read book Comparison of Dynamic Moduli for Asphalt Mixtures Determined from Different Geometries and Compactions written by Andrew Lacroix and published by . This book was released on 2012 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The MEPDG (ARA, Inc., "NCHRP 1-37A Final Report: Guide for Mechanistic-Empirical Design of New and Rehabilitated Pavement Structures," NCHRP Program 1-37A Project, National Research Council, Washington, D.C., 2004) introduces the dynamic modulus as the material property to characterize asphalt concrete. One of the challenges of acquiring the dynamic modulus from existing pavements is the standard dimensions of the test specimen. The specimen size specified in AASHTO TP62-07 (2007, "Standard Method of Test for Determining Dynamic Modulus of Hot-Mix Asphalt Concrete Mixtures," AASHTO, Washington, D.C.) cannot be obtained from many pavement layers. This study evaluates two other geometries, indirect tension specimens and prismatic specimens, to determine whether the measured dynamic modulus is the same as the modulus obtained from TP62 protocol. This study provides a comparison of the effects of a non-uniform state of stress and anisotropy. These effects are isolated by comparing specimens prepared by Superpave gyratory compaction and vibratory steel-wheel compaction. The comparisons are verified using four 12.5-mm surface course mixtures with different aggregate shapes and binder types, and one 25.0-mm base mixture. The results show that the difference between the dynamic modulus values obtained from different geometries is statistically insignificant. The results provide justification for using alternative methods for acquiring the dynamic modulus experimentally?specifically, for previously constructed pavements.
Download or read book Proceedings of the 9th International Conference on Maintenance and Rehabilitation of Pavements Mairepav9 written by Christiane Raab and published by Springer Nature. This book was released on 2020-06-19 with total page 955 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the proceedings of an international conference held at Empa (Swiss Federal Laboratories for materials Science and Technology) in Dübendorf, Switzerland, in July 2020. The conference series was established by the International Society of Maintenance and Rehabilitation of Transport Infrastructure (iSMARTi) for promoting and discussing state-of-the-art design, maintenance, rehabilitation and management of pavements. The inaugural conference was held at Mackenzie Presbyterian University in Sao Paulo, Brazil, in 2000. The series has steadily grown over the past 20 years, with installments hosted in various countries all over the world. The respective contributions share the latest insights from research and practice in the maintenance and rehabilitation of pavements, and discuss advanced materials, technologies and solutions for achieving an even more sustainable and environmentally friendly infrastructure.
Download or read book AASHTO Guide for Design of Pavement Structures 1993 written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 1993 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design related project level pavement management - Economic evaluation of alternative pavement design strategies - Reliability / - Pavement design procedures for new construction or reconstruction : Design requirements - Highway pavement structural design - Low-volume road design / - Pavement design procedures for rehabilitation of existing pavements : Rehabilitation concepts - Guides for field data collection - Rehabilitation methods other than overlay - Rehabilitation methods with overlays / - Mechanistic-empirical design procedures.
Download or read book Improving the Determination of the Dynamic Modulus of Asphalt Concrete for Mechanistic empirical Pavement Design written by Ghareib Harran and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Case Studies Using Falling Weight Deflectometer Data with Mechanistic empirical Design and Analysis written by Kurt D. Smith and published by . This book was released on 2012 with total page 14 pages. Available in PDF, EPUB and Kindle. Book excerpt: The need to accurately characterize the structural condition of existing pavements has increased with the recent development, release, and ongoing implementation of the Mechanistic-Empirical Pavement Design Guide (MEPDG), developed under National Cooperative Highway Research Program Project No. 1-37A. A number of different material inputs are required in the procedure, and it is important that these be adequately characterized and defined so that competent structural designs can be developed. The analysis of deflection data collected with a falling weight deflectometer (FWD) provides a quick and reliable way of characterizing many of the parameters of the existing pavement layers. This paper summarizes how deflection data are incorporated into the MEPDG and describes two case studies, one with a flexible pavement and one with a rigid pavement. Significant findings and recommendations from the evaluated flexible pavement case study include the following: surface-down cracking is critical in the design of the hot mix asphalt (HMA) overlay, correction factors should be used for adjusting backcalculated layer moduli to laboratory determined values, and an FWD testing frequency of 30 Hz should be used for estimating the existing HMA modulus. For rigid pavements, the case study found that the thinnest overlay produced from the MEPDG was a bonded Portland cement concrete (PCC) overlay, whereas the HMA overlay was unreasonably thick. Within the design procedure, the manually entered k-value is used for unbonded and bonded jointed plain concrete pavements but does not appear to be used by the program in the HMA overlay design. The backcalculated dynamic (or static) elastic modulus should be used for the PCC layer, and the dynamic k-value should be used for the supporting layers. The backcalculated k-value representing the composite stiffness of all layers beneath the slab does not appear to have a significant influence on the design thickness for the pavement structure analyzed.
Download or read book A Manual for Design of Hot Mix Asphalt with Commentary written by and published by Transportation Research Board. This book was released on 2011 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Framework for Development of Performance related Specifications for Hot mix Asphaltic Concrete written by David A. Anderson and published by Transportation Research Board. This book was released on 1990 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Calibration of Rutting Models for Structural and Mix Design written by Harold L. Von Quintus and published by Transportation Research Board. This book was released on 2012 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: TRB’s National Cooperative Highway Research Program (NCHRP) Report 719: Calibration of Rutting Models for Structural and Mix Design highlights proposed revisions to the Mechanistic–Empirical Pavement Design Guide (MEPDG) and software to incorporate three alternative rut-depth prediction models that rely on repeated load (triaxial) permanent deformation or constant height testing to provide the requisite input data.
