Download or read book Determination of Shear wave Velocity Profiles from Surface Rayleigh Seismic Waves written by and published by . This book was released on 2003 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vertical Shear wave Velocity Profiles Generated from Spectral Analysis of Surface Waves written by Dr. Neil Anderson and published by . This book was released on 2003 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface wave (Rayleigh wave) seismic data were acquired at six separate bridge sites in southeast Missouri. Each acquired surface wave data set was processed [spectral analysis of surface waves (SASW)] and transformed into a site-specific vertical shear-wave velocity profile (SASW shear-wave velocity profile). The SASW shear-wave velocity profiles generated for each bridge site were compared to other geotechnical data including seismic cone penetrometer shear-wave velocity profiles, cross-borehole shear-wave velocity profiles, and borehole lithology logs. The geotechnical data presented herein indicate the SASW shear-wave velocity profiles correlate well with subsurface lithology logs and available cross-borehole shear-wave velocity control. More specifically, clays, silts and sands exhibit relatively characteristic SASW shear-wave velocities, which increase incrementally with increasing depth of burial. The authors believe these correlations demonstrate that SASW shear-wave velocities are reliable.
Download or read book Surface Wave Analysis for Near Surface Applications written by Giancarlo Dal Moro and published by Elsevier. This book was released on 2014-11-04 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Wave Analysis for Near Surface Applications presents the foundational tools necessary to properly analyze surface waves acquired according to both active and passive techniques. Applications range from seismic hazard studies, geotechnical surveys and the exploration of extra-terrestrial bodies. Surface waves have become critical to near-surface geophysics both for geotechnical goals and seismic-hazard studies. Included in this book are the related theories, approaches and applications which the lead editor has assembled from a range of authored contributions carefully selected from the latest developments in research. A unique blend of theory and practice, the book’s concepts are based on exhaustive field research conducted over the past decade from the world’s leading seismologists and geophysicists. Edited by a geophysicist with nearly 20 years of experience in research, consulting, and geoscience software development Nearly 100 figures, photographs, and examples aid in the understanding of fundamental concepts and techniques Presents the latest research in seismic wave characteristics and analysis, the fundamentals of signal processing, wave data acquisition and inversion, and the latest developments in horizontal-to-vertical spectral ratio (HVSR) Each chapter features a real-world case study—13 in all—to bring the book’s key principles to life
Download or read book Efficient Joint Analysis of Surface Waves and Introduction to Vibration Analysis Beyond the Clich s written by Giancarlo Dal Moro and published by Springer Nature. This book was released on 2020-06-20 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book bridges the gap between theory and practice, showing how a detailed definition of the shear-wave velocity (VS) profile can be efficiently obtained using limited field equipment and following simple acquisition procedures. It demonstrates how surface waves (used to define the VS profile) and vibration data (used to describe the dynamic behaviour of a building) can be recorded using the same equipment, and also highlights common problems, ambiguities and pitfalls that can occur when adopting popular methodologies, which are often based on a series of simplistic assumptions. Today, most national and international building codes take into account a series of parameters aimed at defining the local seismic hazard. Sites are characterised based on the local VS profile, and the dynamic behaviour of existing buildings is defined through the analysis of their eigenmodes. The book includes a series of case studies to help readers gain a deeper understanding of seismic and vibration data and the meaning (pros and cons) of a series of techniques often referred to as MASW, ESAC, SPAC, ReMi, HVSR, MAAM and HS. It also provides access to some of the datasets so that readers can gain a deeper and more concrete understanding of both the theoretical and practical aspects.
Download or read book Surface Wave Methods for Near Surface Site Characterization written by Sebastiano Foti and published by CRC Press. This book was released on 2014-08-21 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develop a Greater Understanding of How and Why Surface Wave Testing WorksUsing examples and case studies directly drawn from the authors' experience, Surface Wave Methods for Near-Surface Site Characterization addresses both the experimental and theoretical aspects of surface wave propagation in both forward and inverse modeling. This book accents
Download or read book The Microtremor Survey Method written by Hiroshi Okada and published by SEG Books. This book was released on 2003 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the nature of the microtremor noise field, the use of appropriate surface arrays of geophones, and the two principal classes of array-processing techniques, high-resolution beamforming and the spatial autocorrelation method (SPAC). This is the first comprehensive textbook of the microtremor survey method written in English.
Download or read book Shear wave Exploration written by S. H. Danbom and published by . This book was released on 1987 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of shear (S) waves in seismic petroleum exploration is in a critical stage of development. This book outles the past technologies, the current ones and the possible future ones.The current efforts in S- wave exploration described in this paper consist of investigation of problems in S- wave recording for example surface wave interference, processing for example, reflectiion static time corrections and interpretation for example correlation of reflections on P- and S- wave seismic sections. It also looks at a recent development that will advance S- wave exploration considerably.
Download or read book Geotechnical Site Characterization Using Multi channel Analysis of Rayleigh and Love Waves written by James David Lane and published by . This book was released on 2009 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Multi-Channel Analysis of Surface Waves (MASW) is a technique in which surface waves can be analyzed to determine soil shear wave velocity profiles with depth. The shear wave velocity of soil can be used to calculate the shear modulus, which is an important geotechnical engineering parameter. Site surveys were conducted and analyzed located at a location on the flood plain of the Tennessee River. The flood plain consists of a thin layer of soil above rigid (Knox Dolomite) bedrock and exhibited strong stratification. Three different aspects of MASW data acquisition and analysis are presented in the study. The first aspect is the response correction of the classical horizontal and vertical component geophone and its effects on surface wave dispersion; the second aspect is the effect of Rayleigh wave MASW data acquisition, analysis, and modeling as influenced by Rayleigh wave guides; the third aspect is the use of MASW and Love wave data acquisition, analysis, and modeling. MASW is performed using a seismic source and geophones (velocity sensor) without correcting the amplitude and phase errors induced by the equivalent single degree of freedom response function representing the mechanical response of a given velocity sensor. Geophones were experimentally tested in the laboratory to determine their natural frequency, damping ratio, and transduction constants. The results from these tests were mathematically corrected for their mechanical response and compared to uncorrected and corrected field data. Several seismic sources and various sourceoffset distances were evaluated to determine their effects on Rayleigh wave dispersion. Rayleigh waves, guided in a layer, were interpreted to have a profound influence on the Rayleigh wave dispersion data obtained using different seismic sources and source-offset distances. Results from Love wave data analysis produced superior dispersion data in comparison to the dispersion data obtained from Rayleigh wave data, making interpretation much more certain.
Download or read book The Effects of Surface Geology on Seismic Motion written by Kojiro Irikura and published by CRC Press. This book was released on 1999 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of conference proceedings provides coverage of topics such as: weak motion effects; estimation of site effects using microtremors; nonlinear ground response; topographic effects; attenuation relations; seismic zonation; and simultaneous simulation for Kobe.
Download or read book Seismic Refraction Prospecting written by Society of Exploration Geophysicists and published by . This book was released on 1967 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is a compilation of the newer techniques of refraction seismic surveying. It contains a series of articles written principally by members of SEG who are specialist in refraction techniques. The volume contains only new materials with a bibliography of references to other refraction materials available. The majority of the papers are of a "technique type" which describe some particular interpretation technique that may be used for better interpretation of special refraction data.
Download or read book Measurement and Use of Shear Wave Velocity for Evaluating Dynamic Soil Properties written by Richard D. Woods and published by . This book was released on 1985 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Detection of SH type Seismic Shear Waves by Means of Angular Accelerometers written by James H. Whitcomb and published by . This book was released on 1969 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: A method for detecting and recording seismic shear waves by means of angular accelerometers.
Download or read book A 2 D MASW Shear wave Velocity Profile Along a Test Segment of Interstate I 70 St Louis Missouri written by N. Anderson and published by . This book was released on 2004 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: The University of Missouri-Rolla acquired multi-channel surface wave (Rayleigh wave) seismic data along a 6400 ft segment of Interstate I-70 in downtown St. Louis, Missouri. The acquired surface wave data set was processed [multi-channel analysis of surface waves (MASW)] and transformed into a 2-D MASW shear-wave velocity profile with a station-spacing of 40 ft. The interpreted depth to bedrock along the length of the 2-D profile varies between 20 ft and 44 ft. Geotechnical data provided by the Missouri Department of Transportation and presented herein indicates the interpreted 2-D MASW shear-wave velocity profile correlates well with available bedrock (borehole) and seismic cone penetrometer control, supporting the conclusion that the MASW technique can be used to generate reliable 2-D shear-wave velocity profiles.
Download or read book Reducing Uncertainties in the Velocities Determined by Inversion of Phase Velocity Dispersion Curves Using Synthetic Seismograms written by Seyed Mehrdad Hosseini and published by . This book was released on 2014 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Characterizing the near-surface shear-wave velocity structure using Rayleigh-wave phase velocity dispersion curves is widespread in the context of reservoir characterization, exploration seismology, earthquake engineering, and geotechnical engineering. This surface seismic approach provides a feasible and low-cost alternative to the borehole measurements. Phase velocity dispersion curves from Rayleigh surface waves are inverted to yield the vertical shear-wave velocity profile. A significant problem with the surface wave inversion is its intrinsic non-uniqueness, and although this problem is widely recognized, there have not been systematic efforts to develop approaches to reduce the pervasive uncertainty that affects the velocity profiles determined by the inversion. Non-uniqueness cannot be easily studied in a nonlinear inverse problem such as Rayleigh-wave inversion and the only way to understand its nature is by numerical investigation which can get computationally expensive and inevitably time consuming. Regarding the variety of the parameters affecting the surface wave inversion and possible non-uniqueness induced by them, a technique should be established which is not controlled by the non-uniqueness that is already affecting the surface wave inversion. An efficient and repeatable technique is proposed and tested to overcome the non-uniqueness problem; multiple inverted shear-wave velocity profiles are used in a wavenumber integration technique to generate synthetic time series resembling the geophone recordings. The similarity between synthetic and observed time series is used as an additional tool along with the similarity between the theoretical and experimental dispersion curves. The proposed method is proven to be effective through synthetic and real world examples. In these examples, the nature of the non-uniqueness is discussed and its existence is shown. Using the proposed technique, inverted velocity profiles are estimated and effectiveness of this technique is evaluated; in the synthetic example, final inverted velocity profile is compared with the initial target velocity model, and in the real world example, final inverted shear-wave velocity profile is compared with the velocity model from independent measurements in a nearby borehole. Real world example shows that it is possible to overcome the non-uniqueness and distinguish the representative velocity profile for the site that also matches well with the borehole measurements.
Download or read book A Study on the Benefits of Including Near field Effects in Active source Surface Wave Data Collection and Interpretation written by Thompson McCaskill and published by . This book was released on 2014 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geotechnical analyses for earthquake engineering and other applications are often predicated on the accurate determination of shear wave velocity (VS) profiles. Surface wave methods (SWM) are a noninvasive approach to developing VS profiles that involve measurement of Rayleigh wave propagation between a wave-generating source and a receiver array placed on the ground surface. There are several variations of SWM, but all utilize the same three-step process for developing a VS profile, namely: (1) data collection -- measuring ground surface vibrations emanating from a source; (2) data processing -- developing an experimental dispersion curve relating wave velocity to wavelength or frequency; and (3) inversion -- finding the VS profile that produces a theoretical dispersion curve matching the experimental dispersion curve. In current practice, the theoretical model used to fit the experimental data is a far-field model that only simulates motions from planar Rayleigh waves. Therefore, the receiver array used to collect the data in step 1 must be located far from the source (or "far-field"), where body waves have largely dissipated (due to greater damping) and Rayleigh wavefronts are nearly planar. Closer to the source -- in the so-called "nearfield" -- the ground motion includes coupled interactions of body waves and non-planar Rayleigh waves and is inconsistent with a far-field theoretical model. The primary objective of this study was to investigate the effectiveness and potential benefits of including near-field contributions in both the surface wave data collection and modeling. First, it was hypothesized that source offset distance criteria currently used to mitigate near-field effects could be greatly reduced without affecting the quality of surface wave results.Second, it was hypothesized that additional information about the soil profile could be determined if the near-field portion of the dispersion curve was included in both the data collection and theoretical modeling. Three different studies were performed for this research, namely: (1) a preliminary sensitivity study, to study the sensitivity of the near-field portion of the dispersion curve to changes in various profile parameters, (2) surface wave analysis using simulated experimental data, to assess both profile recovery effectiveness and the possibility of inferring additional profile parameters (specifically, Poisson's ratio), and (3) surface wave analysis with real data, to validate the profile findings from the study using simulated data. Experimental data were collected and/or simulated using both the Spectral-Analysis-of-Surface-Waves (SASW) method and multi-channel surface wave methods, but the primary focus of this study was on the SASW method. The results from the study showed that surface wave analyses that included near-field contributions in both data collection and theoretical modeling were as effective or more effective at recovering the VS profile as conventional far-field approaches, with the benefit of shorter arrays and smaller sources. This study also showed that surface wave measurements that included near-field data were sensitive to changes in Poisson's ratio of the profile, as compared with the known insensitivity of conventional far-field surface wave methods. The results from the limited experimental study were less conclusive, but generally confirmed the findings from the study performed using simulated data.
Download or read book Seismic Wave Propagation in the Earth written by Andrzej Hanyga and published by Elsevier Publishing Company. This book was released on 1985 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains an extensive presentation of the theory, phenomenology and interpretation of seismic waves produced by natural and artificial sources. Each theoretical topic discussed in the book is presented in a self-contained and mathematically rigorous form, yet without excessive demands on the reader's mathematical background. It is the only book to include such a complete presentation of the mathematical background and modern developments of the WKBJ theory of seismic waves, and detailed discussions of its wide ranging applications. The book will therefore be useful to postgraduate students and research workers specialising in seismic wave theory, theoretical seismology, electromagnetic wave theory and other fields of wave propagation theory.
Download or read book Geophysical Characterization of Sites written by Richard D. Woods and published by Science Publishers. This book was released on 1994 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
