Download or read book Baltic Piling written by M. Mets and published by CRC Press. This book was released on 2013-07-29 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Baltic Piling' contains the proceedings of theBaltic Piling Days 2012 (Tallinn, Estonia, 3-5 September 2012). The book includes contributions on current issues in pile foundation engineering:- Interaction of pile and grillage;- Formation of pile bearing capacity- Settlements of piles- Pile foundation under historical buildings- Thermopiles, and

Download or read book Guidelines for Cone Penetration Test written by United States. Federal Highway Administration. Implementation Division and published by . This book was released on 1977 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual presents procedures and guidelines applicable to the use of the cone penetration test. It represents the author's interpretation of the state-of-the-art in Dutch static cone testing as of February 1977. Its contents should provide assistance and uniformity to engineers concerned with the interpretation of the data obtained from such testing. Only geotechnical engineers familiar with the fundamentals of soil mechanics and foundation engineering should use this manual. The manual includes: Introduction and review of the general principals concerning cone penetrometer testing. Individual design chapters which address topics such as: pile design, shear strength estimation, settlement calculation and compaction control; and Appendices which present previously published, pertinent information on cone penetrometer testing.

Download or read book Canadian Foundation Engineering Manual written by Canadian Geotechnical Society and published by Richmond, B.C. : Canadian Geotechnical Society. This book was released on 1992 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis of Laterally Loaded Piles in Multilayered Soil Deposits written by Dipanjan Basu and published by Purdue University Press. This book was released on 2007-10-01 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report focuses on the development of a new method of analysis of laterally loaded piles embedded in a multi-layered soil deposit treated as a three-dimensional continuum. Assuming that soil behaves as a linear elastic material, the governing differential equations for the deflection of laterally loaded piles were obtained using energy principles and calculus of variations. The differential equations were solved using both the method of initial parameters and numerical techniques. Soil resistance, pile deflection, slope of the deflected pile, bending moment and shear force can be easily obtained at any depth along the entire pile length. The results of the analysis were in very good agreement with three-dimensional finite element analysis results. The analysis was further extended to account for soil nonlinearity. A few simple constitutive relationships that allow for modulus degradation with increasing strain were incorporated into the analysis. The interaction of piles in groups was also studied.

Download or read book Cone Penetration Testing 2022 written by Guido Gottardi and published by CRC Press. This book was released on 2022-06-24 with total page 2767 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 5th International Symposium on Cone Penetration Testing (CPT’22), held in Bologna, Italy, 8-10 June 2022. More than 500 authors - academics, researchers, practitioners and manufacturers – contributed to the peer-reviewed papers included in this book, which includes three keynote lectures, four invited lectures and 169 technical papers. The contributions provide a full picture of the current knowledge and major trends in CPT research and development, with respect to innovations in instrumentation, latest advances in data interpretation, and emerging fields of CPT application. The paper topics encompass three well-established topic categories typically addressed in CPT events: - Equipment and Procedures - Data Interpretation - Applications. Emphasis is placed on the use of statistical approaches and innovative numerical strategies for CPT data interpretation, liquefaction studies, application of CPT to offshore engineering, comparative studies between CPT and other in-situ tests. Cone Penetration Testing 2022 contains a wealth of information that could be useful for researchers, practitioners and all those working in the broad and dynamic field of cone penetration testing.

Download or read book Basics of Foundation Design written by Bengt Fellenius and published by Lulu.com. This book was released on 2017-03-17 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The "Red Book" presents a background to conventional foundation analysis and design. The text is not intended to replace the much more comprehensive 'standard' textbooks, but rather to support and augment these in a few important areas, supplying methods applicable to practical cases handled daily by practising engineers and providing the basic soil mechanics background to those methods. It concentrates on the static design for stationary foundation conditions. Although the topic is far from exhaustively treated, it does intend to present most of the basic material needed for a practising engineer involved in routine geotechnical design, as well as provide the tools for an engineering student to approach and solve common geotechnical design problems.

Download or read book Design of Pile Foundations written by US Army Corps of Engineers and published by . This book was released on 2005-01-01 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides information, foundation exploration and testing procedures, load test methods, analysis techniques, allowable criteria, design procedures, and construction consideration for the selection, design, and installation of pile foundations. The guidance is based on the present state of the technology for pile-soil-structure-foundation interaction behavior. This manual provides design guidance intended specifically for the geotechnical and structural engineer but also provides essential information for others interested in pile foundations such as the construction engineer in understanding construction techniques related to pile behavior during installation. Since the understanding of the physical causes of pile foundation behavior is actively expanding by better definition through ongoing research, prototype, model pile, and pile group testing and development of more refined analytical models, this manual is intended to provide examples and procedures of what has been proven successful. This is not the last nor final word on the state of the art for this technology. We expect, as further practical design and installation procedures are developed from the expansion of this technology, that these updates will be issued as changes to this manual.

Download or read book Single Piles and Pile Groups Under Lateral Loading written by Lymon C. Reese and published by CRC Press. This book was released on 2010-12-15 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: The complexities of designing piles for lateral loads are manifold as there are many forces that are critical to the design of big structures such as bridges, offshore and waterfront structures and retaining walls. The loads on structures should be supported either horizontally or laterally or in both directions and most structures have in common t

Download or read book Soil Strength and Slope Stability written by J. Michael Duncan and published by John Wiley & Sons. This book was released on 2014-09-22 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to the critical issue of slope stability and safety Soil Strength and Slope Stability, Second Edition presents the latest thinking and techniques in the assessment of natural and man-made slopes, and the factors that cause them to survive or crumble. Using clear, concise language and practical examples, the book explains the practical aspects of geotechnical engineering as applied to slopes and embankments. The new second edition includes a thorough discussion on the use of analysis software, providing the background to understand what the software is doing, along with several methods of manual analysis that allow readers to verify software results. The book also includes a new case study about Hurricane Katrina failures at 17th Street and London Avenue Canal, plus additional case studies that frame the principles and techniques described. Slope stability is a critical element of geotechnical engineering, involved in virtually every civil engineering project, especially highway development. Soil Strength and Slope Stability fills the gap in industry literature by providing practical information on the subject without including extraneous theory that may distract from the application. This balanced approach provides clear guidance for professionals in the field, while remaining comprehensive enough for use as a graduate-level text. Topics include: Mechanics of soil and limit equilibrium procedures Analyzing slope stability, rapid drawdown, and partial consolidation Safety, reliability, and stability analyses Reinforced slopes, stabilization, and repair The book also describes examples and causes of slope failure and stability conditions for analysis, and includes an appendix of slope stability charts. Given how vital slope stability is to public safety, a comprehensive resource for analysis and practical action is a valuable tool. Soil Strength and Slope Stability is the definitive guide to the subject, proving useful both in the classroom and in the field.

Download or read book Pressuremeter Testing written by R. J. Mair and published by Elsevier. This book was released on 2013-10-22 with total page 169 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressuremeter Testing: Methods and Interpretation the history, applications, and development of pressumeter devices and related test procedures. The book covers topics such as the general principles of pressuremeter testing; types of pressuremeters and their installation and calibration; and the estimation of soil from pressuremeter tests in clays, sands, and weak rocks. Also included are topics such as the application of pressuremeter testing to design and research in the improvement of the use of pressuremeters. An appendix is also included; Appendix A covers the analysis of pressuremeter tests, and Appendix B contains guidance notes for the specifications of pressuremeter tests. The text is recommended for engineers and geologists who would like to know more about the applications of the pressuremeter and the interpretation of its results.

Download or read book The Pressuremeter written by Jean-Louis Briaud and published by Routledge. This book was released on 2019-07-16 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic title deals presents all one needs to know about pressuremeter test, a soil and rock test used in civil engineering. It consists of placing a cylindrical probe in the ground and expanding the probe to pressurize the soil or the rock horizontally. The pressure on the soil and the relative increase in cavity radius are obtained and give an in situ stress strain curve. The pressuremeter test is repeated at various depths in order to obtain profiles of soil parameters. The design applications of the preboring pressuremeter test include: shallow foundations under vertical loads, deep foundations under vertical and horizontal loads, ground anchors, cantilever drilled shaft walls and anchored bulkheads, pavements, stone columns, ground improvement and compaction control.

Download or read book State of the Art and Practice in the Assessment of Earthquake Induced Soil Liquefaction and Its Consequences written by National Academies of Sciences, Engineering, and Medicine and published by . This book was released on 2019-01-30 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake-induced soil liquefaction (liquefaction) is a leading cause of earthquake damage worldwide. Liquefaction is often described in the literature as the phenomena of seismic generation of excess porewater pressures and consequent softening of granular soils. Many regions in the United States have been witness to liquefaction and its consequences, not just those in the west that people associate with earthquake hazards. Past damage and destruction caused by liquefaction underline the importance of accurate assessments of where liquefaction is likely and of what the consequences of liquefaction may be. Such assessments are needed to protect life and safety and to mitigate economic, environmental, and societal impacts of liquefaction in a cost-effective manner. Assessment methods exist, but methods to assess the potential for liquefaction triggering are more mature than are those to predict liquefaction consequences, and the earthquake engineering community wrestles with the differences among the various assessment methods for both liquefaction triggering and consequences. State of the Art and Practice in the Assessment of Earthquake-Induced Soil Liquefaction and Its Consequences evaluates these various methods, focusing on those developed within the past 20 years, and recommends strategies to minimize uncertainties in the short term and to develop improved methods to assess liquefaction and its consequences in the long term. This report represents a first attempt within the geotechnical earthquake engineering community to consider, in such a manner, the various methods to assess liquefaction consequences.

Download or read book Analysis and Design of Shallow and Deep Foundations written by Lymon C. Reese and published by John Wiley & Sons. This book was released on 2005-11-25 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: One-of-a-kind coverage on the fundamentals of foundation analysis and design Analysis and Design of Shallow and Deep Foundations is a significant new resource to the engineering principles used in the analysis and design of both shallow and deep, load-bearing foundations for a variety of building and structural types. Its unique presentation focuses on new developments in computer-aided analysis and soil-structure interaction, including foundations as deformable bodies. Written by the world's leading foundation engineers, Analysis and Design of Shallow and Deep Foundations covers everything from soil investigations and loading analysis to major types of foundations and construction methods. It also features: * Coverage on computer-assisted analytical methods, balanced with standard methods such as site visits and the role of engineering geology * Methods for computing the capacity and settlement of both shallow and deep foundations * Field-testing methods and sample case studies, including projects where foundations have failed, supported with analyses of the failure * CD-ROM containing demonstration versions of analytical geotechnical software from Ensoft, Inc. tailored for use by students in the classroom

Download or read book Theory and Practice of Pile Foundations written by Wei Dong Guo and published by CRC Press. This book was released on 2012-11-14 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pile Foundations are an essential basis for many structures. It is vital that they be designed with the utmost reliability, because the cost of failure is potentially huge. Covering a whole range of design issues relating to pile design, this book presents economical and efficient design solutions and demonstrates them using real world examples. Coverage includes nonlinear response of single piles to vertical or torsional loading and to cyclic lateral loading, as well as prediction of nonlinear response of lateral pile groups, vertically loaded pile groups and the design of slope stabilising piles. Most solutions are provided as closed-form expressions. Theory and Practice of Pile Foundations is: illustrated with case studies accompanied by practical applications in Excel and MathCad the first book to incorporate nonlinear interaction into pile design. A valuable resource for students of geotechnical engineering taking courses in foundations and a vital tool for engineers designing pile foundations.

Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 7743 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.

Download or read book Geotechnical Engineering written by V.N.S. Murthy and published by CRC Press. This book was released on 2002-10-25 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must have reference for any engineer involved with foundations, piers, and retaining walls, this remarkably comprehensive volume illustrates soil characteristic concepts with examples that detail a wealth of practical considerations, It covers the latest developments in the design of drilled pier foundations and mechanically stabilized earth retaining wall and explores a pioneering approach for predicting the nonlinear behavior of laterally loaded long vertical and batter piles. As complete and authoritative as any volume on the subject, it discusses soil formation, index properties, and classification; soil permeability, seepage, and the effect of water on stress conditions; stresses due to surface loads; soil compressibility and consolidation; and shear strength characteristics of soils. While this book is a valuable teaching text for advanced students, it is one that the practicing engineer will continually be taking off the shelf long after school lets out. Just the quick reference it affords to a huge range of tests and the appendices filled with essential data, makes it an essential addition to an civil engineering library.

Download or read book Calibration Chamber Testing written by An-Bin Huang and published by . This book was released on 1991 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: