Download or read book Determination of Fatigue Limit Between 105 and 109 Cycles Using an Ultrasonic Fatigue Device written by C. Bathias and published by . This book was released on 1993 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-power ultrasound was used to study fatigue behavior of three alloys (Udimet 500, 17-4PH, and Ti-6A1-4V) since the loading frequency is very high (f = 20 kHz) and a great number of cycles can be obtained in a short time. The specimens were excited in resonance at the first longitudinal mode in such a way that maximum strain occurred in the middle and maximum displacement amplitude was obtained at the end of the specimen. Fatigue life behavior of the three alloys were investigated at ultrasonic (/ = 20 kHz) and conventional loading frequency (f = 20 to 50 Hz). Miniature dynamic strain gages were employed to measure maximum strain values during ultrasonic fatigue tests. The effect of high strain rate on fatigue crack initiation and propagation failure mechanism was examined. Fracture surface of specimens was observed by means of a scanning electron microscope. Fatigue resistance was found to depend upon ultrasonic and mechanical characteristics and microstructure of the material, loading regime, and surface condition of the specimen.
Download or read book Advances in Fatigue Lifetime Predictive Techniques Second Volume written by Michael R. Mitchell and published by ASTM International. This book was released on 1993 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gigacycle Fatigue in Mechanical Practice written by Claude Bathias and published by CRC Press. This book was released on 2004-09-13 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by pioneers in the study and analysis of very high cycle fatigue this text brings together the most recent findings on gigacycle fatigue phenomena, focusing on improving the reliability and performance of key engine and machine components. This reference reflects the explosion of new concepts, testing methods, and data on very high cycle fa
Download or read book Fatigue of Materials and Structures written by Claude Bathias and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of mechanical structures with predictable and improved durability cannot be achieved without a thorough understanding of the mechanisms of fatigue damage and more specifically the relationships between the microstructure of materials and their fatigue properties. Written by leading researchers in the field, this book, along with the complementary books Fatigue of Materials and Structures: Fundamentals and Application to Damage and Design (both also edited by Claude Bathias and André Pineau), provides an authoritative, comprehensive and unified treatment of the mechanics and micromechanisms of fatigue in metals, polymers and composites. Each chapter is devoted to one of the major classes of materials or to different types of fatigue damage, thereby providing overall coverage of the field. This book deals with multiaxial fatigue, thermomechanical fatigue, fretting-fatigue, influence of defects on fatigue life, cumulative damage and damage tolerance, and will be an important and much used reference for students, practicing engineers and researchers studying fracture and fatigue in numerous areas of materials science and engineering, mechanical, nuclear and aerospace engineering.
Download or read book Lifetime Controlling Defects in Tool Steels written by Christian Rudolf Sohar and published by Springer Science & Business Media. This book was released on 2011-08-12 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this thesis Christian Sohar describes his investigation into the gigacycle fatigue behavior of tool steels. In an interdisciplinary approach he uses knowledge and methods from a wide variety of disciplines including materials science, metallurgy, chemistry, physics and mechanical engineering. Christian gives a general introduction into steel tools and fatigue in materials. Later he extensively discusses the experimental techniques and results. Indeed it is the detail of the content in this thesis which makes it an invaluable resource for students entering the field and scientists working in related disciplines. Overall, the thesis helps us understand more about the mechanical behavior of metallic materials with complex microstructure and high hardness.
Download or read book Ultrasonic Fatigue Testing of Ti 6Al 4V written by RJ. Morrissey and published by . This book was released on 2005 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this research was to investigate the high cycle fatigue behavior of a titanium alloy using an ultrasonic fatigue system. Fatigue testing up to one billion cycles under fully reversed loading conditions was performed to determine the ultra-high cycle fatigue behavior of Ti-6Al-4V. Endurance limit results were compared to similar data generated on conventional servohydraulic test systems and electromagnetic shaker systems to determine if there are any frequency effects. In addition, specimens were tested with and without cooling air to determine the effects of temperature on the fatigue behavior. Results indicate that the fatigue strength determined from ultrasonic testing was consistent with conventional testing. However, preliminary results indicate that cooling air may increase the fatigue limit stress at very long lives.
Download or read book Materials and Product Technologies written by Zhi Yun Shen and published by Trans Tech Publications Ltd. This book was released on 2008-06-12 with total page 950 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume is indexed by Thomson Reuters CPCI-S (WoS). This collection comprises 130 selected peer-reviewed papers which address a number of scientific issues underlying the increased global attention paid to mechanical product performance and reliability. Contributions were received from researchers in 8 different countries. The collection aims to report the latest experimental findings and to promote further theoretical research into mechanical product development and reliability.
Download or read book Ultrasonic Fatigue written by Joseph M. Wells and published by . This book was released on 1982 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ultrasonics International 1975 written by L. J. I. Browne and published by . This book was released on 1975 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manual on Fatigue Testing written by American Society for Testing Materials. Committee E-9 on Fatigue and published by . This book was released on 1949 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Note written by and published by . This book was released on 1965 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Relation Between Endurance Limits and Thresholds in the Field of Gigacycle Fatigue written by C. Bathias and published by . This book was released on 2000 with total page 20 pages. Available in PDF, EPUB and Kindle. Book excerpt: In order to predict fatigue crack propagation at very long life a piezoelectric fatigue machine was built in our laboratory. This device is able to fail specimen at 1010 cycles and to determine thresholds up to 109 mm/cycle. The originality of this machine resides in the possibility to apply simultaneously to a specimen a constant tension effect and longitudinal ultrasonic vibratory effort with adjustable amplitude. That is to say, the R ratio can be varied from -1 to 0.9.
Download or read book A Study of Accelerated Fatigue Testing written by Prafulla Kumar Das and published by . This book was released on 1963 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Guide for Fatigue Testing and the Statistical Analysis of Fatigue Data written by ASTM Committee E-9 on Fatigue and published by . This book was released on 1964 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fracture of Nano and Engineering Materials and Structures written by E.E. Gdoutos and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 1452 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 16th European Conference of Fracture (ECF16) was held in Greece, July, 2006. It focused on all aspects of structural integrity with the objective of improving the safety and performance of engineering structures, components, systems and their associated materials. Emphasis was given to the failure of nanostructured materials and nanostructures including micro- and nano-electromechanical systems (MEMS and NEMS).
Download or read book Application of Ultrasonic Fatigue Testing Techniques to the Evaluation of the Corrosion Fatigue Strength of Materials written by LD. Roth and published by . This book was released on 1984 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: A corrosion fatigue testing system has been developed for examining the corrosion-fatigue strength of engineering materials in the very high cycle regime (109 to 1010 cycles) typical of many design lifetimes. Central to this resonant fatigue testing system is a high efficiency, large displacement, piezoelectric transducer which operates at a frequency of 20 kHz, thus enabling the accumulation of large numbers of cycles in a reasonable amount of time. A description of apparatus, environmental controls, and testing method is presented. Experimental 20 kHz and low frequency corrosion fatigue results for a number of engineering materials, including a 12% chromium stainless steel, show similar reductions in fatigue limit at a specified number of cycles, despite the difference in frequency. This result holds for a variety of aqueous environments with and without electrochemical controls imposed during testing. The data illustrate the capabilities of the ultrasonic corrosion-fatigue technique and are analyzed to assess its advantages and limitations.
Download or read book Encyclopedia of Iron Steel and Their Alloys Online Version written by Rafael Colás and published by CRC Press. This book was released on 2016-01-06 with total page 3918 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining. A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia: Provides extensive coverage of properties and recommended practices Includes a wealth of helpful charts, nomograms, and figures Contains cross referencing for quick and easy search Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
