Download or read book Determination of Density and Viscosity of Fluids and Fluid Mixtures Using Frequency Response of Microcantilevers written by Gamze Eriş and published by . This book was released on 2015 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Viscosity of Liquids written by Dabir S. Viswanath and published by Springer Science & Business Media. This book was released on 2007-03-31 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique in that it brings together published viscosity data, experimental methods, theoretical, correlation and predictive procedures in a single volume. The readers will get a better understanding of why various methods are used for measuring viscosity of different types of liquids and why an experimental method is dependent on fluid characteristics, such as Newtonian or non-Newtonian fluids.
Download or read book Springer Handbook of Nanotechnology written by Bharat Bhushan and published by Springer. This book was released on 2017-11-05 with total page 1704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook has become the definitive reference work in the field of nanoscience and nanotechnology, and this 4th edition incorporates a number of recent new developments. It integrates nanofabrication, nanomaterials, nanodevices, nanomechanics, nanotribology, materials science, and reliability engineering knowledge in just one volume. Furthermore, it discusses various nanostructures; micro/nanofabrication; micro/nanodevices and biomicro/nanodevices, as well as scanning probe microscopy; nanotribology and nanomechanics; molecularly thick films; industrial applications and nanodevice reliability; societal, environmental, health and safety issues; and nanotechnology education. In this new edition, written by an international team of over 140 distinguished experts and put together by an experienced editor with a comprehensive understanding of the field, almost all the chapters are either new or substantially revised and expanded, with new topics of interest added. It is an essential resource for anyone working in the rapidly evolving field of key technology, including mechanical and electrical engineers, materials scientists, physicists, and chemists.
Download or read book Microcantilever Based Viscosity Measurement as it Applies to Oscillation Amplitude Response written by Sanford H. Siegel and published by . This book was released on 2018 with total page 71 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this research is to measure viscosity via the analysis of amplitude response of a piezo driven vibrating cantilevers partially immersed in a viscous medium. As a driving frequency is applied to a piezoceramic material, the external forces acting on the system will affect its maximum amplitude. This thesis applies this principle through experimental and analytical analyses of the proportional relationship between viscosity and the amplitude response of the first natural frequency mode of the sinusoidal vibration. Currently, the few cantilever-based viscometer designs that exist employ resonant frequency response as the parameter by which the viscosity is correlated. The proposed piezoelectric viscometer employs amplitude response in lieu of resonant frequency response. The goal of this aspect of the research was to provide data confirming amplitude response as a viable method for determining viscosity. A miniature piezoelectric plate was mounted to a small stainless-steel cantilever beam. The tip of the cantilever was immersed within various fluid test samples. The cantilever was then swept through a range of frequencies in which the first frequency mode resided. The operating principle being as the viscosity of the fluid increases the amplitude response of cantilever vibration will decrease relatively. What was found was in fact an inversely exponential relationship between dynamic viscosity and the cantilever beam's vibrational amplitude response. The experiment was performed using three types of cantilevers as to experimentally test the sensitivity of each.
Download or read book Resonant MEMS written by Oliver Brand and published by John Wiley & Sons. This book was released on 2015-04-22 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Part of the AMN book series, this book covers the principles, modeling and implementation as well as applications of resonant MEMS from a unified viewpoint. It starts out with the fundamental equations and phenomena that govern the behavior of resonant MEMS and then gives a detailed overview of their implementation in capacitive, piezoelectric, thermal and organic devices, complemented by chapters addressing the packaging of the devices and their stability. The last part of the book is devoted to the cutting-edge applications of resonant MEMS such as inertial, chemical and biosensors, fluid properties sensors, timing devices and energy harvesting systems.
Download or read book Liquid Viscosity and Density Measurement with Flexural Plate Wave Sensors written by Stuart W. Wenzel and published by . This book was released on 1996 with total page 10 pages. Available in PDF, EPUB and Kindle. Book excerpt: Micromachined flexural plate wave (FPW) sensors can detect subtle variations in the density and viscosity of liquids. Liquid density causes a mass-loading effect that lowers the sensor operating frequency. In viscous liquids, the attenuation coefficient of the acoustic wave is proportional to the square-root of the viscosity. We discuss recent results that explore the density-sensing precision and the viscosity-sensing range of FPW sensors. A micromachined FPW sensor (wavelength 100 micrometers, plate thickness 6.0 micrometers, operating frequency in water 5.7 MHz) detected the density of a variety of solvents and aqueous salt solutions with an error less than 0.003 g/(cu.cm) Most of this error was likely due to the uncertainty with which we know the true density and sound velocity of each sample. The same sensor was used to measure the viscosity of aqueous polymer solutions (poly(ethylene glycol) and hydroxyethyl cellulose). The sensor accurately measured the viscosity of solutions with molecular weights up to around 10,000. Polymer solutions with MW>20,000 appeared water like to the sensor (i.e., there was little or no attenuation of the acoustic waves). The degree in apparent viscosity measured with the FPW sensor occurs for polymers with relaxation frequencies greater than or equal to the FPW frequency.
Download or read book Scanning Probe Microscopy in Industrial Applications written by Dalia G. Yablon and published by John Wiley & Sons. This book was released on 2013-10-24 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes new state-of-the-science tools and their contribution to industrial R&D With contributions from leading international experts in the field, this book explains how scanning probe microscopy is used in industry, resulting in improved product formulation, enhanced processes, better quality control and assurance, and new business opportunities. Readers will learn about the use of scanning probe microscopy to support R&D efforts in the semiconductor, chemical, personal care product, biomaterial, pharmaceutical, and food science industries, among others. Scanning Probe Microscopy in Industrial Applications emphasizes nanomechanical characterization using scanning probe microscopy. The first half of the book is dedicated to a general overview of nanomechanical characterization methods, offering a complete practical tutorial for readers who are new to the topic. Several chapters include worked examples of useful calculations such as using Hertz mechanics with and without adhesion to model a contact, step-by-step instructions for simulations to guide cantilever selection for an experiment, and data analysis procedures for dynamic contact experiments. The second half of the book describes applications of nanomechanical characterization in industry, including: New formulation development for pharmaceuticals Measurement of critical dimensions and thin dielectric films in the semiconductor industry Effect of humidity and temperature on biomaterials Characterization of polymer blends to guide product formulation in the chemicals sector Unraveling links between food structure and function in the food industry Contributions are based on the authors' thorough review of the current literature as well as their own firsthand experience applying scanning probe microscopy to solve industrial R&D problems. By explaining the fundamentals before advancing to applications, Scanning Probe Microscopy in Industrial Applications offers a complete treatise that is accessible to both novices and professionals. All readers will discover how to apply scanning probe microscopy to build and enhance their R&D efforts.
Download or read book Non invasive Fluid Density and Viscosity Measurement written by and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The noninvasively measurement of the density and viscosity of static or flowing fluids in a section of pipe such that the pipe performs as the sensing apparatus, is described. Measurement of a suitable structural vibration resonance frequency of the pipe and the width of this resonance permits the density and viscosity to be determined, respectively. The viscosity may also be measured by monitoring the decay in time of a vibration resonance in the pipe.
Download or read book Sound and Structural Vibration written by Frank J. Fahy and published by Elsevier. This book was released on 2007-01-12 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Sound and Structural Vibration was written in the early 1980s. Since then, two major developments have taken place in the field of vibroacoustics. Powerful computational methods and procedures for the numerical analysis of structural vibration, acoustical fields and acoustical interactions between fluids and structures have been developed and these are now universally employed by researchers, consultants and industrial organisations. Advances in signal processing systems and algorithms, in transducers, and in structural materials and forms of construction, have facilitated the development of practical means of applying active and adaptive control systems to structures for the purposes of reducing or modifying structural vibration and the associated sound radiation and transmission. In this greatly expanded and extensively revised edition, the authors have retained most of the analytically based material that forms the pedagogical content of the first edition, and have expanded it to present the theoretical foundations of modern numerical analysis. Application of the latter is illustrated by examples that have been chosen to complement the analytical approaches to solving fairly simple problems of sound radiation, transmission and fluid-structural coupling that are presented in the first edition. The number of examples of experimental data that relate to the theoretical content, and illustrate important features of vibroacoustic interaction, has been augmented by the inclusion of a selection from the vast amount of material published during the past twenty five years. The final chapter on the active control of sound and vibration has no precursor in the first edition. * Covers theoretical approaches to modeling and analysis* Highly applicable to challenges in industry and academia* For engineering students to use throughout their career
Download or read book Opto mechanical Sensor Array for Physically and Chemically Induced Nanoscale Motion Detection written by Si-Hyung Lim and published by . This book was released on 2005 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Measurement Methods for Acoustic Waves and for Acoustic Microdevices written by Marco G. Beghi and published by BoD – Books on Demand. This book was released on 2013-08-28 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Acoustics is a mature field which enjoys a never ending youth. New developments are induced by either the search for a better understanding, or by technological innovations. Micro-fabrication techniques introduced a whole new class of microdevices, which exploit acoustic waves for various tasks, and in particular for information processing and for sensing purposes. Performance improvements are achievable by better modelling tools, able to deal with more complex configurations, and by more refined techniques of fabrication and of integration in technological systems, like wireless communications. Several chapters of this book deal with modelling and fabrication techniques for microdevices, including unconventional phenomena and configurations. But this is far from exhausting the research lines in acoustics. Theoretical analyses and modelling techniques are presented, for phenomena ranging from the detection of cracks to the acoustics of the oceans. Measurement methods are also discussed, which probe by acoustic waves the properties of widely different systems.
Download or read book Broadband Dielectric Spectroscopy written by William Henry Hunter Woodward and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is about Broadband Dielectric Spectroscopy as a Modern Analytical Technique"--
Download or read book Mems for Biomedical Applications written by Shekhar Bhansali and published by Elsevier. This book was released on 2012-07-18 with total page 511 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of Micro Electro Mechanical Systems (MEMS) in the biomedical field is leading to a new generation of medical devices. MEMS for biomedical applications reviews the wealth of recent research on fabrication technologies and applications of this exciting technology.The book is divided into four parts: Part one introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms. Part two describes applications of MEMS for biomedical sensing and diagnostic applications. MEMS for in vivo sensing and electrical impedance spectroscopy are investigated, along with ultrasonic transducers, and lab-on-chip devices. MEMS for tissue engineering and clinical applications are the focus of part three, which considers cell culture and tissue scaffolding devices, BioMEMS for drug delivery and minimally invasive medical procedures. Finally, part four reviews emerging biomedical applications of MEMS, from implantable neuroprobes and ocular implants to cellular microinjection and hybrid MEMS.With its distinguished editors and international team of expert contributors, MEMS for biomedical applications provides an authoritative review for scientists and manufacturers involved in the design and development of medical devices as well as clinicians using this important technology. Reviews the wealth of recent research on fabrication technologies and applications of Micro Electro Mechanical Systems (MEMS) in the biomedical field Introduces the fundamentals of MEMS for biomedical applications, exploring the microfabrication of polymers and reviewing sensor and actuator mechanisms Considers MEMS for biomedical sensing and diagnostic applications, along with MEMS for in vivo sensing and electrical impedance spectroscopy
Download or read book Molecular Sensors and Nanodevices written by John X. J. Zhang and published by Academic Press. This book was released on 2018-11-19 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Molecular Sensors and Nanodevices: Principles, Designs and Applications in Biomedical Engineering, Second Edition is designed to be used as a foundational text, aimed at graduates, advanced undergraduates, early-career engineers and clinicians. The book presents the essential principles of molecular sensors, including theories, fabrication techniques and reviews. In addition, important devices and recently, highly-cited research outcomes are also cited. This differentiates the book from other titles on the market whose primary focus is more research-oriented and aimed at more of a niche market. Covers the fundamental principles of device engineering and molecular sensing, sensor theories and applications in biomedical science and engineering Introduces nano/micro fabrication techniques, including MEMS, bioMEMS, microTAS and nanomaterials science that are essential in the miniaturization of versatile molecular sensors Explores applications of nanomaterials and biomaterials, including proteins, DNAs, nanoparticles, quantum dots, nanotubes/wires and graphene in biomedicine
Download or read book Fundamentals of Vibrations written by Leonard Meirovitch and published by Waveland Press. This book was released on 2010-06-17 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Vibrations provides a comprehensive coverage of mechanical vibrations theory and applications. Suitable as a textbook for courses ranging from introductory to graduate level, it can also serve as a reference for practicing engineers. Written by a leading authority in the field, this volume features a clear and precise presentation of the material and is supported by an abundance of physical explanations, many worked-out examples, and numerous homework problems. The modern approach to vibrations emphasizes analytical and computational solutions that are enhanced by the use of MATLAB. The text covers single-degree-of-freedom systems, two-degree-of-freedom systems, elements of analytical dynamics, multi-degree-of-freedom systems, exact methods for distributed-parameter systems, approximate methods for distributed-parameter systems, including the finite element method, nonlinear oscillations, and random vibrations. Three appendices provide pertinent material from Fourier series, Laplace transformation, and linear algebra.
Download or read book Point of care testing written by Peter Luppa and published by Springer. This book was released on 2018-07-18 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: The underlying technology and the range of test parameters available are evolving rapidly. The primary advantage of POCT is the convenience of performing the test close to the patient and the speed at which test results can be obtained, compared to sending a sample to a laboratory and waiting for results to be returned. Thus, a series of clinical applications are possible that can shorten the time for clinical decision-making about additional testing or therapy, as delays are no longer caused by preparation of clinical samples, transport, and central laboratory analysis. Tests in a POC format can now be found for many medical disciplines including endocrinology/diabetes, cardiology, nephrology, critical care, fertility, hematology/coagulation, infectious disease and microbiology, and general health screening. Point-of-care testing (POCT) enables health care personnel to perform clinical laboratory testing near the patient. The idea of conventional and POCT laboratory services presiding within a hospital seems contradictory; yet, they are, in fact, complementary: together POCT and central laboratory are important for the optimal functioning of diagnostic processes. They complement each other, provided that a dedicated POCT coordination integrates the quality assurance of POCT into the overall quality management system of the central laboratory. The motivation of the third edition of the POCT book from Luppa/Junker, which is now also available in English, is to explore and describe clinically relevant analytical techniques, organizational concepts for application and future perspectives of POCT. From descriptions of the opportunities that POCT can provide to the limitations that clinician’s must be cautioned about, this book provides an overview of the many aspects that challenge those who choose to implement POCT. Technologies, clinical applications, networking issues and quality regulations are described as well as a survey of future technologies that are on the future horizon. The editors have spent considerable efforts to update the book in general and to highlight the latest developments, e.g., novel POCT applications of nucleic acid testing for the rapid identification of infectious agents. Of particular note is also that a cross-country comparison of POCT quality rules is being described by a team of international experts in this field.
Download or read book Nanotechnology Enabled Sensors written by Kourosh Kalantar-zadeh and published by Springer Science & Business Media. This book was released on 2007-09-19 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology provides tools for creating functional materials, devices, and systems by controlling materials at the atomic and molecular scales and making use of novel properties and phenomena. Nanotechnology-enabled sensors find applications in several fields such as health and safety, medicine, process control and diagnostics. This book provides the reader with information on how nanotechnology enabled sensors are currently being used and how they will be used in the future in such diverse fields as communications, building and facilities, medicine, safety, and security, including both homeland defense and military operations.
