Download or read book Multiphase Flow Handbook Second Edition written by Efstathios Michaelides and published by CRC Press. This book was released on 2016-10-26 with total page 1559 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Multiphase Flow Handbook, Second Edition is a thoroughly updated and reorganized revision of the late Clayton Crowe’s work, and provides a detailed look at the basic concepts and the wide range of applications in this important area of thermal/fluids engineering. Revised by the new editors, Efstathios E. (Stathis) Michaelides and John D. Schwarzkopf, the new Second Edition begins with two chapters covering fundamental concepts and methods that pertain to all the types and applications of multiphase flow. The remaining chapters cover the applications and engineering systems that are relevant to all the types of multiphase flow and heat transfer. The twenty-one chapters and several sections of the book include the basic science as well as the contemporary engineering and technological applications of multiphase flow in a comprehensive way that is easy to follow and be understood. The editors created a common set of nomenclature that is used throughout the book, allowing readers to easily compare fundamental theory with currently developing concepts and applications. With contributed chapters from sixty-two leading experts around the world, the Multiphase Flow Handbook, Second Edition is an essential reference for all researchers, academics and engineers working with complex thermal and fluid systems.
Download or read book The Gas Turbine Handbook written by Tony Giampaolo and published by . This book was released on 2003 with total page 405 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modelling Fluid Flow written by János Vad and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modelling Fluid Flow presents invited lectures, workshop summaries and a selection of papers from a recent international conference CMFF '03 on fluid technology. The lectures follow the current evolution and the newest challenges of the computational methods and measuring techniques related to fluid flow. The workshop summaries reflect the recent trends, open questions and unsolved problems in the mutually inspiring fields of experimental and computational fluid mechanics. The papers cover a wide range of fluids engineering, including reactive flow, chemical and process engineering, environmental fluid dynamics, turbulence modelling, numerical methods, and fluid machinery.
Download or read book Centrifugal Pumps written by Val S. Lobanoff and published by Elsevier. This book was released on 2013-10-22 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centrifugal Pumps: Design and Application, Second Edition focuses on the design of chemical pumps, composite materials, manufacturing techniques employed in nonmetallic pump applications, mechanical seals, and hydraulic design. The publication first offers information on the elements of pump design, specific speed and modeling laws, and impeller design. Discussions focus on shape of head capacity curve, pump speed, viscosity, specific gravity, correction for impeller trim, model law, and design suggestions. The book then takes a look at general pump design, volute design, and design of multi-stage casing. The manuscript examines double-suction pumps and side-suction design, net positive suction head, and vertical pumps. Topics include configurations, design features, pump vibration, effect of viscosity, suction piping, high speed pumps, and side suction and suction nozzle layout. The publication also ponders on high speed pumps, double-case pumps, hydraulic power recovery turbines, and shaft design and axial thrust. The book is a valuable source of data for pump designers, students, and rotating equipment engineers.
Download or read book Fluid Mechanics Measurements written by R. Goldstein and published by Routledge. This book was released on 2017-11-13 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised edition provides updated fluid mechanics measurement techniques as well as a comprehensive review of flow properties required for research, development, and application. Fluid-mechanics measurements in wind tunnel studies, aeroacoustics, and turbulent mixing layers, the theory of fluid mechanics, the application of the laws of fluid mechanics to measurement techniques, techniques of thermal anemometry, laser velocimetry, volume flow measurement techniques, and fluid mechanics measurement in non-Newtonian fluids, and various other techniques are discussed.
Download or read book Laser Techniques for Fluid Mechanics written by R.J. Adrian and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes revised and extended versions of selected papers presented at the Tenth International Symposium on Applications of Laser Techniques to Fluid Mechanics held at the Calouste Gulbenkian Foundation in Lisbon, during the period of July 10 to 13, 2000. The papers describe instrumentation developments for Velocity, Scalar and Multi-Phase Flows and results of measurements of Turbulent Flows, and Combustion and Engines. The papers demonstrate the continuing and healthy interest in the development of understanding of new methodologies and implementation in terms of new instrumentation. The prime objective of the Tenth Symposium was to provide a forum for the presentation of the most advanced research on laser techniques for flow measurements, and communicate significant results to fluid mechanics. The application of laser techniques to scientific and engineering fluid flow research was emphasized, but contributions to the theory and practice of laser methods were also considered where they facilitate new improved fluid mechanic research. Attention was placed on laser-Doppler anemometry, particle sizing and other methods for the measurement of velocity and scalars, such as particle image velocimetry and laser induced fluorescence.
Download or read book Rules of Thumb for Chemical Engineers written by Carl Branan and published by Gulf Professional Publishing. This book was released on 2002 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractionators, separators and accumulators, cooling towers, gas treating, blending, troubleshooting field cases, gas solubility, and density of irregular solids * Hundreds of common sense techniques, shortcuts, and calculations.
Download or read book OpenFOAM written by J. Miguel Nóbrega and published by Springer. This book was released on 2019-01-24 with total page 527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers of the 11th OpenFOAM® Workshop that was held in Guimarães, Portugal, June 26 - 30, 2016. The 11th OpenFOAM® Workshop had more than 140 technical/scientific presentations and 30 courses, and was attended by circa 300 individuals, representing 180 institutions and 30 countries, from all continents. The OpenFOAM® Workshop provided a forum for researchers, industrial users, software developers, consultants and academics working with OpenFOAM® technology. The central part of the Workshop was the two-day conference, where presentations and posters on industrial applications and academic research were shown. OpenFOAM® (Open Source Field Operation and Manipulation) is a free, open source computational toolbox that has a larger user base across most areas of engineering and science, from both commercial and academic organizations. As a technology, OpenFOAM® provides an extensive range of features to solve anything from complex fluid flows involving chemical reactions, turbulence and heat transfer, to solid dynamics and electromagnetics, among several others. Additionally, the OpenFOAM technology offers complete freedom to customize and extend its functionalities.
Download or read book Fluid Machinery and Fluid Mechanics written by Jianzhong Xu and published by Springer Science & Business Media. This book was released on 2010-07-05 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Fluid Machinery and Fluid Mechanics: 4th International Symposium (4th ISFMFE)" is the proceedings of 4th International Symposium on Fluid Machinery and Fluid Engineering, held in Beijing November 24-27, 2008. It contains 69 highly informative technical papers presented at the Mei Lecture session and the technical sessions of the symposium. The Chinese Society of Engineering Thermophysics (CSET) organized the First, the Second and the Third International Symposium on Fluid Machinery and Fluid Engineering (1996, 2000 and 2004). The purpose of the 4th Symposium is to provide a common forum for exchange of scientific and technical information worldwide on fluid machinery and fluid engineering for scientists and engineers. The main subject of this symposium is "Fluid Machinery for Energy Conservation". The "Mei Lecture" reports on the most recent developments of fluid machinery in commemoration of the late professor Mei Zuyan. The book is intended for researchers and engineers in fluid machinery and fluid engineering. Jianzhong Xu is a professor at the Chinese Society of Engineering Thermophysics, Chinese Academy of Sciences, Beijing.
Download or read book High Voltage Circuit Breakers written by Ruben D. Garzon and published by CRC Press. This book was released on 2002-06-04 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised and updated reference presents sensible approaches to the design, selection, and usage of high-voltage circuit breakers-highlighting compliance issues concerning new and aging equipment to the evolving standards set forth by the American National Standards Institute and the International Electrotechnical Commission. This edition features the latest advances in mechanical and dielectric design and application from a simplified qualitative perspective. High Voltage Circuit Breakers: Design and Applications features new material on contact resistance, insulating film coatings, and fretting; temperature at the point of contact; short-time heating of copper; erosion and electromagnetic forces on contacts; closing speed and circuit breaker requirements; "weld" break and contact bounce; factors influencing dielectric strength; air, SF6, vacuum, and solid insulation; and dielectric loss and partial discharges, and includes updated chapters on capacitance switching; switching series and shunt reactors; temporary overvoltages; and the benefits of condition monitoring.
Download or read book Renewable Energy and Sustainable Buildings written by Ali Sayigh and published by Springer Nature. This book was released on 2019-08-30 with total page 969 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains selected papers presented during the World Renewable Energy Network’s 28thanniversary congress at the University of Kingston in London. The forum highlighted the integration of renewables and sustainable buildings as the best means to combat climate change. In-depth chapters written by the world’s leading experts highlight the most current research and technological breakthroughs and discuss policy, renewable energy technologies and applications in all sectors – for heating and cooling, agricultural applications, water, desalination, industrial applications and for the transport sectors. Presents cutting-edge research in green building and renewable energy from all over the world; Covers the most up-to-date research developments, government policies, business models, best practices and innovations; Contains case studies and examples to enhance practical application of the technologies.
Download or read book Centrifugal Pumps written by Johann Friedrich Gülich and published by Springer. This book was released on 2014-10-24 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an unparalleled, up-to-date, in-depth treatment of all kinds of flow phenomena encountered in centrifugal pumps including the complex interactions of fluid flow with vibrations and wear of materials. The scope includes all aspects of hydraulic design, 3D-flow phenomena and partload operation, cavitation, numerical flow calculations, hydraulic forces, pressure pulsations, noise, pump vibrations (notably bearing housing vibration diagnostics and remedies), pipe vibrations, pump characteristics and pump operation, design of intake structures, the effects of highly viscous flows, pumping of gas-liquid mixtures, hydraulic transport of solids, fatigue damage to impellers or diffusers, material selection under the aspects of fatigue, corrosion, erosion-corrosion or hydro-abrasive wear, pump selection, and hydraulic quality criteria. As a novelty, the 3rd ed. brings a fully analytical design method for radial impellers, which eliminates the arbitrary choices inherent to former design procedures. The discussions of vibrations, noise, unsteady flow phenomena, stability, hydraulic excitation forces and cavitation have been significantly enhanced. To ease the use of the information, the methods and procedures for the various calculations and failure diagnostics discussed in the text are gathered in about 150 pages of tables which may be considered as almost unique in the open literature. The text focuses on practical application in the industry and is free of mathematical or theoretical ballast. In order to find viable solutions in practice, the physical mechanisms involved should be thoroughly understood. The book is focused on fostering this understanding which will benefit the pump engineer in industry as well as academia and students.
Download or read book Fundamentals of Turbomachinery written by William W. Peng and published by John Wiley & Sons. This book was released on 2007-12-21 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to turbomachines and their applications With up-to-date coverage of all types of turbomachinery for students and practitioners, Fundamentals of Turbomachinery covers machines from gas, steam, wind, and hydraulic turbines to simple pumps, fans, blowers, and compressors used throughout industry. After reviewing the history of turbomachinery and the fluid mechanical principles involved in their design and operation, the book focuses on the application and selection of machines for various uses, teaching basic theory as well as how to select the right machine for a specific use. With a practical emphasis on engineering applications of turbomachines, this book discusses the full range of both turbines and pumping devices. For each type, the author explains: * Basic principles * Preliminary design procedure * Ideal performance characteristics * Actual performance curves published by the manufacturers * Application and appropriate selection of the machine Throughout, worked sample problems illustrate the principles discussed and end-of-chapter problems, employing both SI and the English system of units, provide practice to help solidify the reader's grasp of the material.
Download or read book Transactions of ASME written by and published by . This book was released on 1897 with total page 1288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fluid Machinery written by Terry Wright and published by CRC Press. This book was released on 2009-12-16 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Published nearly a decade ago, Fluid Machinery: Performance, Analysis, and Design quickly became popular with students, professors, and professionals because of its comprehensive and comprehensible introduction to the fluid mechanics of turbomachinery. Renamed to reflect its wider scope and reorganized content, this second edition provides a more logical flow of information that will enhance understanding. In particular, it presents a consistent notation within and across chapters, updating material when appropriate. Although the authors do account for the astounding growth in the field of computational fluid dynamics that has occurred since publication of the first edition, this text emphasizes traditional "one-dimensional" layout and points the way toward using CFD for turbomachinery design and analysis. Presents Extensive Examples and Design Exercises to Illustrate Performance Parameters and Machine Geometry By focusing on the preliminary design and selection of equipment to meet performance specifications, the authors promote a basic yet thorough understanding of the subject. They cover topics including gas and hydraulic turbines and equipment that is widely used in the industry, such as compressors, blowers, fans, and pumps. This book promotes a pragmatic approach to turbomachinery application and design, examining a realistic array of difficulties and conflicting requirements. The authors use examples from a broad range of industrial applications to illustrate the generality of the basic design approach and the common ground of seemingly diverse areas of application. With a variety of illustrations, examples, and exercises that emphasize real-world industrial applications, this book not only prepares students to face industrial applications with confidence, but also supplies professionals with a compact and easy-to-use reference.
Download or read book Hydraulics in Civil and Environmental Engineering written by Andrew Chadwick and published by CRC Press. This book was released on 2021-06-07 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: This classic text, now in its sixth edition, combines a thorough coverage of the basic principles of civil engineering hydraulics with a wide-ranging treatment of practical, real-world applications. It now includes a powerful online resource with worked solutions for chapter problems and solution spreadsheets for more complex problems that may be used as templates for similar issues. Hydraulics in Civil and Environmental Engineering is structured into two parts to deal with principles and more advanced topics. The first part focuses on fundamentals, such as hydrostatics, hydrodynamics, pipe and open channel flow, wave theory, physical modelling, hydrology and sediment transport. The second part illustrates engineering applications of these principles to pipeline system design, hydraulic structures, river and coastal engineering, including up-to-date environmental implications, as well as a chapter on computational modelling, illustrating the application of computational simulation techniques to modern design, in a variety of contexts. New material and additional problems for solution have been added to the chapters on hydrostatics, pipe flow and dimensional analysis. The hydrology chapter has been revised to reflect updated UK flood estimation methods, data and software. The recommendations regarding the assessment of uncertainty, climate change predictions, impacts and adaptation measures have been updated, as has the guidance on the application of computational simulation techniques to river flood modelling. Andrew Chadwick is an honorary professor of coastal engineering and the former associate director of the Marine Institute at the University of Plymouth, UK. John Morfett was the head of hydraulics research and taught at the University of Brighton, UK. Martin Borthwick is a consultant hydrologist, formerly a flood hydrology advisor at the UK’s Environment Agency, and previously an associate professor at the University of Plymouth, UK.
Download or read book Design for Creep written by R.K. Penny and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our rationale for the second edition remains the same as for the first edition, which appeared over twenty years ago. This is to offer simplified, useful and easily understood methods for dealing with the creep of components operating under conditions met in practice. When the first edition was written, we could not claim that the methods which were introduced were well-tried. They were somewhat conjectural, although firmly based, but not sufficiently well devel oped. Since that time, the Reference Stress Methods (RSM) introduced in the book have received much scrutiny and development. The best recognition we could have of the original methods is the fact that they are now firmly embedded in codes of practice. Hopefully, we have now gone a long way towards achieving our original objectives. There are major additions to this second edition which should help to justify our claims. These include further clarification regarding Reference Stress Methods in Chapter 4. There are also new topics which depend on RSM in varying degrees: • Creep fracture is covered in Chapter 7, where methods for assessing creep crack initiation and crack growth are fully described. This chapter starts with a review of the basic concepts of fracture mechanics and follows with useful, approximate methods, compatible with the needs of design for creep and the availability of standard data. • Creep/fatigue interactions and environmental effects appear in Chapter 8.
