Download or read book Destruction of Chlorinated Hydrocarbons by Catalytic Oxidation written by and published by . This book was released on 1986 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report provides the results of a study conducted to determine the effectiveness of catalytic oxidation for destroying vapor phase chlorinated hydrocarbons. The study was conducted on two pilot scale catalytic incinerator systems leased from vendors. One system employed a metal oxide catalyst in a fluidized bed configuration. The other system used a fixed bed proprietary catalyst, supplemented with UV light and ozone injection. Both systems were tested under a variety of temperatures and space velocities. The test vapor streams consisted of low concentrations (3 to 200 ppmv) mixtures of organic compounds, and included three streams which represented the emissions from air strippers used to treat contaminated groundwater at U.S. Air Force bases. The study results showed that the fluidized bed catalytic incinerator system was capable of achieving total organic destruction efficiencies of greater than 98%. The UV/ozone catalytic system failed to achieve high destruction efficiencies; with ozone injection, total destruction was 75%; without ozone, the maximum destruction efficiency was 64%.
Download or read book Destruction of Chlorinated Hydrocarbons by Catalytic Oxidation written by and published by . This book was released on 1987 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heterogeneous Catalytic Oxidation written by B. K. Hodnett and published by John Wiley & Sons. This book was released on 2000-07-13 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative and comprehensive volume presents the essence of catalytic chemistry, describing the structure of catalysts, the technology in which they are used and the chemical transformations that occur during reaction. Heterogeneous catalytic oxidation is a key technique used in the large-scale production of organic chemicals. This text uses catalytic oxidation to explain the principles of heterogeneous catalysis and includes descriptions of how reactants and products interact on the molecular scale with the active sites on the surface of these materials. Following an introduction to the principles and chemistry of catalytic oxidation, Professor Hodnett uses detailed case studies which represent and illustrate the fundamentals and technology for specific aspects of heterogeneous catalytic oxidation including: * Propene Oxidation to Acrolein * n-Butane Oxidation to Maleic Anhydride * Epoxidation over Silver Catalysts * Fundamentals and Technologies of the Catalytic Destruction of Volatile Organic Compounds * Ammoxidation for the Insertion of Nitrogen into Organic Structures * Oxidative Insertion of Chlorine into Ethylene and Catalytic Combustion of Chlorinated Hydrocarbons * Liquid Phase Oxidations with Particular Emphasis on the Use of Hydrogen Peroxide as an Oxidizing Agent
Download or read book Handbook Of Advanced Methods And Processes In Oxidation Catalysis From Laboratory To Industry written by Daniel Duprez and published by World Scientific. This book was released on 2014-07-24 with total page 1035 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive overview of the most recent developments in both total oxidation and combustion and also in selective oxidation. For each topic, fundamental aspects are paralleled with industrial applications. The book covers oxidation catalysis, one of the major areas of industrial chemistry, outlining recent achievements, current challenges and future opportunities. One distinguishing feature of the book is the selection of arguments which are emblematic of current trends in the chemical industry, such as miniaturization, use of alternative, greener oxidants, and innovative systems for pollutant abatement. Topics outlined are described in terms of both catalyst and reaction chemistry, and also reactor and process technology.
Download or read book Hazardous Waste Site Remediation written by Domenic Grasso and published by Routledge. This book was released on 2017-11-22 with total page 549 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hazardous Waste Site Remediation is an outstanding textbook that reviews specific treatment processes, as well as pertinent basic concepts in organic geochemistry, material balance mass transfer, thermodynamics, and kinetics. Following a quantitative approach to source control, the text covers regulations, materials handling, engineering principles, soil vapor extraction, chemical extraction and soil washing, solidification and stabilization, and chemical destruction. It also explores topics in bioremediation, thermal processes, risk assessment, and waste minimization. A solutions manual is available.
Download or read book Science and Technology in Catalysis written by Masakazu Anpo and published by Gulf Professional Publishing. This book was released on 2003-07-09 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Selected) -- Plenary Lecures: New Catalysts for Controlled/Living Atom Transfer Radical Polymerization (ATRP; Catalysis and Applications of Gold Nanoparticles -- Oral Presentations: Ionic Liquids as New Solvents and Catalysis for Petrochemical and Refining Processes; High Throughput Experiment on the Investigation of Oxidation Catalysts with Gas Sensor System -- Poster Presentations: Development of a Low-Temperature Dioxin Decomposition Catalyst; Studies on Unique Properties of Polyolefins Prepared with Metallocene Catalyst Systems -- Index.
Download or read book Catalysis of Organic Reactions written by Dennis G. Morrell and published by CRC Press. This book was released on 2002-11-13 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text offers authoritative contributions from nearly 200 leaders in the field and new methods to enhance catalytic reactions. "Catalysis of Organic Reactions" covers approaches for designing, modifying, and altering catalysts for improved function, performance, and stability, procedures to reduce by-product formation, and cost-effective alterna
Download or read book Hazardous Waste Treatment Storage and Disposal Facilities TSDF written by and published by . This book was released on 1991 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Gas Purification written by Arthur L Kohl and published by Elsevier. This book was released on 1997-08-28 with total page 1409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This massively updated and expanded fifth edition is the most complete, authoritative engineering treatment of the dehydration and gas purification processes used in industry today. Of great value to design and operations engineers, it gives practical process and equipment design descriptions, basic data, plant performance results, and other detailed information on gas purification processes and hardware. This latest edition incorporates all significant advances in the field since 1985.You will find major new chapters on the rapidly expanding technologies of nitrogen oxide control, with discussions of regulatory requirements and available processes; absorption in physical solvents, covering single component and mixed solvent systems; and membrane permeation, with emphasis on the gas purification applications of membrane units. In addition, new sections cover areas of strong current interest, particularly liquid hydrocarbon treating, Claus plant tail gas treating, thermal oxidation of volatile organic compounds, and sulfur scavenging processes.This volume brings you expanded coverage of alkanolamines for hydrogen sulfide and carbon dioxide removal, the removal and use of ammonia in gas purification, the use of alkaline salt solutions for acid gas removal, and the use of water to absorb gas impurities. The basic technologies and all significant advances in the following areas are thoroughly described: sulfur dioxide removal and recovery processes, processes for converting hydrogen sulfide to sulfur, liquid phase oxidation processes for hydrogen sulfide removal, the absorption of water vapor by dehydrating solutions, gas dehydration and purification by adsorption, and the catalytic and thermal conversion of gas impurities.
Download or read book Energy Research Abstracts written by and published by . This book was released on 1987 with total page 1316 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemistry Beyond Chlorine written by Pietro Tundo and published by Springer. This book was released on 2016-09-17 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the industrial revolution, chlorine remains an iconic molecule even though its production by the electrolysis of sodium chloride is extremely energy intensive. The rationale behind this book is to present useful and industrially relevant examples for alternatives to chlorine in synthesis. This multi-authored volume presents numerous contributions from an international spectrum of authors that demonstrate how to facilitate the development of industrially relevant and implementable breakthrough technologies. This volume will interest individuals working in organic synthesis in industry and academia who are working in Green Chemistry and Sustainable Technologies.
Download or read book Kirk Othmer Chemical Technology and the Environment 2 Volume Set written by Wiley and published by John Wiley & Sons. This book was released on 2007-05-21 with total page 2597 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two-volume reference work Chemical Technology and the Environment provides readers with knowledge on contemporary issues in environmental pollution, prevention and control, as well as regulatory, health and safety issues as related to chemical technology. It introduces and expands the knowledge on emerging "green" materials and processes and "greener" energy technology, as well as more general concepts and methodology including sustainable development and chemistry and green chemistry. Based on Wiley's renowned, Kirk-Othmer Encyclopedia of Chemical Technology, this compact reference features the same breadth and quality of coverage and clarity of presentation found in the original.
Download or read book ORD Publications Announcement written by Center for Environmental Research Information (U.S.) and published by . This book was released on 1991 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hazardous Waste Remediation written by Harry Freeman and published by CRC Press. This book was released on 1995-10-18 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains information of interest to those charged with selecting remediation processes for cleaning up hazardous waste from abandoned disposal sites. The individual chapters provide technology descriptions and a wealth of appropriate technical data for many specific technologies being proposed today or containing and treating wastes in, around, and under abandoned sites.
Download or read book Catalytic Air Pollution Control written by Ronald M. Heck and published by John Wiley & Sons. This book was released on 2016-03-07 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Catalytic Air Pollution Control: Commercial Technology is the primary source for commercial catalytic air pollution control technology, offering engineers a comprehensive account of all modern catalytic technology. This Third Edition covers all the new advances in technology in automotive catalyst control technology, diesel engine catalyst control technology, small engine catalyst control technology, and alternate sustainable fuels for auto and diesel.
Download or read book Scientific Advances in Alternative Demilitarization Technologies written by F.W. Holm and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: FRANCIS W. HOLM Science Applications International Corporation 7102 Meadow Lane, Chevy Chase, MD 20815 The North Atlantic Treaty Organization (NATO) sponsored an Advanced Research Workshop (ARW) in Warsaw, Poland on April 24-25, 1995, to collect and study information on alternative and supplemental demilitarization technologies. The conference included experienced scientists and engineers, who delivered presentations and provided written reports oftheir findings. Countries describing their technologies included: Poland (pre-processing, thermal oxidation, and instrumentation), Russia (molten salt oxidation, plasma, catalytic oxidation, supertoxicants, molten metal, fluid bed reactions, and hydrogenation), Germany (supercritical water oxidation and detoxification), the United Kingdom (electrochemical oxidation), the United States (wet air oxidation, detoxification and biodegradation), and the Czech Republic (biodegradation). The technologies identified for assessment at the workshop are alternatives to incineration technology for chemical warfare agent destruction. Treatment of metal parts and explosive or energetic material were considered as a secondary issue. The treatment of dunnage and problems associated with decontamination, while recognized as an element of demilitarization, received only limited discussion. The alternative technologies are grouped into three categories based on process bulk operating temperature: low (O-200°C), medium (200-600°C), and high (600-3,500°C). Reaction types considered include hydrolysis, oxidation, electrochemical, hydrogenation, and pyrolysis. These categories represent a broad spectrum of processes, some of which have been studied only in the laboratory and some of which are in commercial use for destruction of hazardous and toxic wastes. Some technologies have been developed and used for specific commercial applications.
Download or read book Treatment of Micropollutants in Water and Wastewater written by Jurate Virkutyte and published by IWA Publishing. This book was released on 2010-08-14 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few years there has been a growing concern over the increasing concentration of micropollutants originating from a great variety of sources including pharmaceutical, chemical engineering and personal care product industries in rivers, lakes, soil and groundwater. As most of the micropollutants are polar and persistent compounds, they are only partially or not at all removed from wastewater and thus can enter the environment posing a great risk to the biota. It is hypothesized that wastewater is one of the most important point sources for micropollutants. Treatment of Micropollutants in Water and Wastewater gives a comprehensive overview of modern analytical methods and will summarize novel single and hybrid methods to remove continuously emerging contaminants - micropollutants from the aqueous phase. New trends (e.g. sensor technology, nanotechnology and hybrid treatment technologies) are described in detail. The book is very timely because the new techniques are still in the development phase and have to be realized not only in the laboratory but also on a larger scale. The content of the book is divided into chapters that present current descriptive and analytical methods that are available to detect and measure micropollutants together with detailed information on various chemical, biological and physicochemical methods that have evolved over the last few decades. Treatment of Micropollutants in Water and Wastewater will also enable readers to make well informed choices through providing an understanding of why and how micropollutants must be removed from water sources, and what are the most appropriate and available techniques for providing a cost and technologically effective and sustainable solutions for reaching the goal of micropollutant-free water and wastewater. The book will be suitable for water and wastewater professionals as well for students and researchers in civil engineering, environmental engineering and process engineering fields.
