Download or read book Designing with Plastics and Composites A Handbook written by Donald Rosato and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 984 pages. Available in PDF, EPUB and Kindle. Book excerpt: For some time there has been a strong need in the plastic and related industries for a detailed, practical book on designing with plastics and composites (reinforced plastics). This one-source book meets this criterion by clearly explaining all aspects of designing with plastics, as can be seen from the Table of Contents and Index. It provides information on what is ahead as well as today's technology. It explains how to interrelate the process of meeting design performance requirements with that of selecting the proper plastic and manufacturing process to make a product at the lowest cost. This book has been prepared with an awareness that its usefulness will depend greatly upon its simplicity. The overall guiding premise has therefore been to provide all essential information. Each chapter is organized to best present a methodology for designing with plastics and composites. of industrial designers, whether in engineering This book will prove useful to all types or involved in products, molds, dies or equipment, and to people in new-product ventures, research and development, marketing, purchasing, and management who are involved with such different products as appliances, the building industry, autos, boats, electronics, furniture, medical, recreation, space vehicles, and others. In this handbook the basic essentials of the properties and processing behaviors of plastics are presented in a single source intended to be one the user will want to keep within easy reach.
Download or read book Designing with Plastics and Composites A Handbook written by Donald Rosato and published by Springer. This book was released on 2013-02-26 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: For some time there has been a strong need in the plastic and related industries for a detailed, practical book on designing with plastics and composites (reinforced plastics). This one-source book meets this criterion by clearly explaining all aspects of designing with plastics, as can be seen from the Table of Contents and Index. It provides information on what is ahead as well as today's technology. It explains how to interrelate the process of meeting design performance requirements with that of selecting the proper plastic and manufacturing process to make a product at the lowest cost. This book has been prepared with an awareness that its usefulness will depend greatly upon its simplicity. The overall guiding premise has therefore been to provide all essential information. Each chapter is organized to best present a methodology for designing with plastics and composites. of industrial designers, whether in engineering This book will prove useful to all types or involved in products, molds, dies or equipment, and to people in new-product ventures, research and development, marketing, purchasing, and management who are involved with such different products as appliances, the building industry, autos, boats, electronics, furniture, medical, recreation, space vehicles, and others. In this handbook the basic essentials of the properties and processing behaviors of plastics are presented in a single source intended to be one the user will want to keep within easy reach.
Download or read book Designing with Plastics and Composites A Handbook written by Donald Rosato and published by Springer. This book was released on 1991-07-25 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: For some time there has been a strong need in the plastic and related industries for a detailed, practical book on designing with plastics and composites (reinforced plastics). This one-source book meets this criterion by clearly explaining all aspects of designing with plastics, as can be seen from the Table of Contents and Index. It provides information on what is ahead as well as today's technology. It explains how to interrelate the process of meeting design performance requirements with that of selecting the proper plastic and manufacturing process to make a product at the lowest cost. This book has been prepared with an awareness that its usefulness will depend greatly upon its simplicity. The overall guiding premise has therefore been to provide all essential information. Each chapter is organized to best present a methodology for designing with plastics and composites. of industrial designers, whether in engineering This book will prove useful to all types or involved in products, molds, dies or equipment, and to people in new-product ventures, research and development, marketing, purchasing, and management who are involved with such different products as appliances, the building industry, autos, boats, electronics, furniture, medical, recreation, space vehicles, and others. In this handbook the basic essentials of the properties and processing behaviors of plastics are presented in a single source intended to be one the user will want to keep within easy reach.
Download or read book Plastics Design Handbook written by Marlene G. Rosato and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 697 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a simplified and practical approach to designing with plastics that funda mentally relates to the load, temperature, time, and environment subjected to a product. It will provide the basic behaviors in what to consider when designing plastic products to meet performance and cost requirements. Important aspects are presented such as understanding the advantages of different shapes and how they influence designs. Information is concise, comprehensive, and practical. Review includes designing with plastics based on material and process behaviors. As de signing with any materials (plastic, steel, aluminum, wood, etc.) it is important to know their behaviors in order to maximize product performance-to-cost efficiency. Examples of many different designed products are reviewed. They range from toys to medical devices to cars to boats to underwater devices to containers to springs to pipes to buildings to aircraft to space craft. The reader's product to be designed can directly or indirectly be related to product design reviews in the book. Important are behaviors associated and interrelated with plastic materials (thermoplastics, thermosets, elastomers, reinforced plastics, etc.) and fabricating processes (extrusion, injec tion molding, blow molding, forming, foaming, rotational molding, etc.). They are presented so that the technical or non-technical reader can readily understand the interrelationships.
Download or read book Designing with Reinforced Composites written by Dominick V. Rosato and published by Hanser Verlag. This book was released on 1997-01-01 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This detailed and practical book on designing with reinforced plastic (RP) composites provides essential information on how to succeed in meeting product performance requirements while simultaneously producing at the lowest possible cost with zero defects. The information presented ranges from basic design principles to designs of different sized molded parts produced by different processes.
Download or read book Handbook of Plastics Elastomers and Composites written by Charles A. Harper and published by McGraw Hill Professional. This book was released on 2002 with total page 904 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a thoroughly revised edition of the most comprehensive guide to plastics, elastomers and composites available today. A standard reference, it provides current data, costs & properties for all designers and manufacturers of plastic products.
Download or read book Handbook of Composites written by S.T. Peters and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, fiber reinforced composites are in use • properties of different component (fiber, in a variety of structures, ranging from space matrix, filler) materials; craft and aircraft to buildings and bridges. • manufacturing techniques; This wide use of composites has been facili • analysis and design; tated by the introduction of new materials, • testing; improvements in manufacturing processes • mechanically fastened and bonded joints; and developments of new analytical and test • repair; ing methods. Unfortunately, information on • damage tolerance; these topics is scattered in journal articles, in • environmental effects; conference and symposium proceedings, in and disposal; • health, safety, reuse, workshop notes, and in government and com • applications in: pany reports. This proliferation of the source - aircraft and spacecraft; material, coupled with the fact that some of - land transportation; the relevant publications are hard to find or - marine environments; are restricted, makes it difficult to identify and - biotechnology; obtain the up-to-date knowledge needed to - construction and infrastructure; utilize composites to their full advantage. - sporting goods. This book intends to overcome these diffi Each chapter, written by a recognized expert, culties by presenting, in a single volume, is self-contained, and contains many of the many of the recent advances in the field of 'state-of-the-art' techniques reqUired for prac composite materials. The main focus of this tical applications of composites.
Download or read book Plastics Products Design Handbook written by Edward Miller and published by CRC Press. This book was released on 2020-11-25 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on complexities, peculiarities, and limitations of various molding processes, and the comparative advantages and disadvantages of the possible plastic products manufacturing techniques, to permit an ideal match of good design and processing.
Download or read book Plastics Design Handbook written by Dominick V. Rosato and published by . This book was released on 2001 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference work provides a simplified and practical approach to designing with plastic materials. It enables the reader to recognize the fundamental considerations necessary when designing products with plastics pertaining to the different processes and different plastics. Intended for both technical and non-technical readers, it encompasses the relation of materials and processes to understanding the art of designing. After introducing the design basics, the book moves on to discuss those factors which influence design. Design features and concepts are then covered, as is how to interpret the plethora of data available. Cost estimation, a key factor of the design process, is investigated in detail before the relative merits of the different types of plastics and processing techniques are presented. It finishes with a look at how the design of individual elements affect the final product design. The information contained will be invaluable to even the most experienced designers and engineers, as well as providing a firm basis for the novice. It provides a complete review of all aspects of the design process from the practical to the theoretical, and the elementary to the advanced.
Download or read book Plastics Product Design Engineering Handbook written by Sidney Levy and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics have become increasingly important in the products used in our society, ranging from housing to packaging, transportation, business machines and especially in medicine and health products. Designing plastic parts for this wide range of uses has become a major activity for designers, architects, engineers, and others who are concerned with product development. Because plastics are unique materials with a broad range of proper ties they are adaptable to a variety of uses. The uniqueness of plastics stems from their physical characteristics which are as different from metals, glasses, and ceramics as these materials are different from each other. One major concern is the design of structures to take loads. Metals as well as the other materials are assumed to respond elastically and to recover completely their original shape after the load is removed. Based on this simple fact, extensive litera ture on applied mechanics of materials has been developed to enable designers to predict accurately the performance of structures under load. Many engineers depend on such texts as Timoshenko's Strength of Materials as a guide to the performance of structures. Using this as a guide, generations of engineers have designed economical and safe structural parts. Unfortunately, these design principles must be modified when designing with plastics since they do not respond elastically to stress and undergo permanent deformation with sus tained loading.
Download or read book Plastics and Composites Welding Handbook written by David A. Grewell and published by . This book was released on 2003 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Composites written by George Lubin and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 788 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of advanced composites, tion. Forecasts indicate that the potential spanning a brief period from inception to usage in automobiles in the early 1990's will application of only 15 to 20 years, epitomizes amount to millions of pounds of advanced the rapidity with which a generation's change composites. in the state-of-the-art can take place. This is in We find ourselves in a peculiar position. marked contrast to past history, in which it The hardware capability is progressing so has usually required 25 years or more of rapidly that the knowledge and familiarity of research before a new structural material was the designer can hardly keep pace. We have an technologically ready. obligation now not just to mature this ad In the mid-1950's the U.S. Air Force identi vanced technology and its applications, but fied the promise for early application of a new also to communicate the state-of-the-art to the class of materials-advanced composites designer in a form in which it can be applied and established its feasibility by the fabrication readily to practical structures. I believe that of raw fiber with exceptional strength- and this book, Handbook of Composites, will modulus-to-weight ratios. The practical fabrica clearly provide a portion of this missing link.
Download or read book Plastics Technology Handbook Fourth Edition written by Manas Chanda and published by CRC Press. This book was released on 2006-12-19 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Because the field of plastics is one of the fastest changing areas today, the need arises to offer relevant, comprehensive material on polymers. An established source of information on modern plastics, the Plastics Technology Handbook continues to provide up-to-date coverage on the properties, processing methods, and applications of polymers. Retaining the easy-to-follow structure of the previous editions, this fourth edition includes new topics of interest that reflect recent developments and lead to better insights into the molecular behavior of polymers. New to the Fourth Edition Advances in supramolecular polymerization, flame retardancy, polymer-based nanomedicines, and drug delivery The new concept of oxo-biodegradable polymers Broadened discussion on plastic foams and foam extrusion processes More information on the processing and applications of industrial polymers, including the emerging field of nanoblends Developments in polymer synthesis and applications, such as polymeric sensors, hydrogels and smart polymers, hyperbranched polymers, shape memory polymers, polymeric optical fibers, scavenger resins, polymer nanocomposites, polymerization-filled composites, and wood-polymer composites A state-of-the-art account of the various available methods for plastics recycling Advances in the use of polymers in packaging, construction, the automotive and aerospace industries, agriculture, electronics and electrical technology, biomedical applications, corrosion prevention, and sports and marine applications Plastics Technology Handbook, Fourth Edition thoroughly covers traditional industrial polymers and their processing methods as well as contemporary polymeric materials, recent trends, and the latest applications.
Download or read book Plastics Products Design Handbook written by Miller and published by CRC Press. This book was released on 1983-12-06 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides information on complexities, peculiarities, and limitations of various molding processes, and the comparative advantages and disadvantages of the possible plastic products manufacturing techniques, to permit an ideal match of good design and processing.
Download or read book The Complete Part Design Handbook written by E. Alfredo Campo and published by Hanser Publications. This book was released on 2006 with total page 902 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook was written for the injection molding product designer who has a limited knowledge of engineering polymers. It is a guide for the designer to decide which resin and design geometries to use for the design of plastic parts. It can also offer knowledgeable advice for resin and machine selection and processing parameters. Manufacturer and end user satisfaction is the ultimate goal.
Download or read book Joining of Plastics written by Jordan Rotheiser and published by Hanser Pub Incorporated. This book was released on 2009 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of this comprehensive handbook emphasizes the relationship between the assembly methods, the materials, and the plastics manufacturing processes, thus enabling the reader to identify the best design/assembly method for a given application. The book has been completely updated and a new chapter on laser welding of plastics has been added. All principal fastening and joining methods used to assemble plastic parts today are described with their particular advantages and disadvantages. Assembly method limitations for a given material and/or a given molding process are discussed in great detail. This is very much a "how-to" book, offering a wealth of hard-to-find detailed information.
Download or read book Injection Molding Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.
