Download or read book Teaching and Designing in Detroit written by Stephen Vogel and published by Routledge. This book was released on 2019-11-18 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a compelling and insightful portrait of ten female architects, artists, and designers who explored unique approaches to teaching, practice, and research in the postindustrial city of Detroit. These women explored the phenomenon of a new “ecological urbanism” through their own work in art, architecture, design, planning, landscape architecture, and installation as well as the work of their students. Teaching and Designing in Detroit provides an eighteen-year snapshot of this work, how it affected the women’s practice, how they influenced student relationships to design and community development, and how their visions are now being carried out in Detroit. This book is organized into sections that group stories according to their focus on practice, pedagogy, and community engagement. Included in the book is a foreword by Leslie Kanes Weisman, the only female architecture professor at the University of Detroit Mercy in the 1970s, and an afterword by Sharon Egretta Sutton reflecting on how working and practicing in Detroit foreshadowed the future vision now being carried out in the rebounding city of Detroit. An intriguing read for students and professionals, this book will illustrate how these lessons learned can be applied by universities and communities in other postindustrial cities.
Download or read book Designing Detroit written by Michael G. Smith and published by Wayne State University Press. This book was released on 2017-05-17 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the early 1900s, Detroit was leading the nation in architectural innovation and designer Wirt Rowland was at the forefront of this advancement, yet few are even aware of his substantial contribution to the evolution of architectural style. It is widely believed that celebrated local architect Albert Kahn designed many of Detroit’s structures, such as the General Motors and First National Bank buildings. In fact, while Kahn’s efforts were focused on running his highly successful firm, it was Rowland, his chief designer, who was responsible for the appearance and layout of these buildings—an important point in appreciating the contributions of both Kahn and Rowland. During the early twentieth century, Rowland devised a wholly new or “modern” design for buildings, one not reliant on decorative elements copied from architecture of the past. As buildings became more specialized for their intended use, Rowland met the challenge with entirely new design methodologies and a number of improved technologies and materials that subsequently became commonplace. Designing Detroit: Wirt Rowland and the Rise of Modern American Architecture begins with a brief overview of Rowland’s early life and career. Author Michael G. Smith goes on to analyze Rowland’s achievements in building design and as a leader of Detroit’s architectural community throughout both World Wars and the Great Depression. The interdependence of architecture with the city’s fluctuating economic prosperity and population growth is explored, illuminating the conditions for good architecture and the arts in general. The author identifies the influence of Jay Hambidge’s “dynamic symmetry” in Rowland’s work and how it allowed him to employ color as a modern replacement for traditional ornamentation, leading to the revolutionary design of the Union Trust (Guardian) Building, for which he receives nearly unanimous praise in national media. This book is concerned primarily with Rowland’s influence on Detroit architecture, but spans beyond his work in Michigan to include the designer’s broad reach from New York to Miami. A comprehensive appendix includes extensive lists of Rowland’s publications, locations he had designed, and jobs taken on by his firm during his tenure. This book represents new research and insights not previously discussed in either scholarly or general audience texts and will be of interest to casual readers of Detroit history, as well as architecture historians.
Download or read book Mapping Detroit written by June Manning Thomas and published by Wayne State University Press. This book was released on 2015-03-16 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of Detroit’s most defining modern characteristics—and most pressing dilemmas—is its huge amount of neglected and vacant land. In Mapping Detroit: Land, Community, and Shaping a City, editors June Manning Thomas and Henco Bekkering use chapters based on a variety of maps to shed light on how Detroit moved from frontier fort to thriving industrial metropolis to today’s high-vacancy city. With contributors ranging from a map archivist and a historian to architects, urban designers, and urban planners, Mapping Detroit brings a unique perspective to the historical causes, contemporary effects, and potential future of Detroit’s transformed landscape. To show how Detroit arrived in its present condition, contributors in part 1, Evolving Detroit: Past to Present, trace the city’s beginnings as an agricultural, military, and trade outpost and map both its depopulation and attempts at redevelopment. In part 2, Portions of the City, contributors delve into particular land-related systems and neighborhood characteristics that encouraged modern social and economic changes. Part 2 continues by offering case studies of two city neighborhoods—the Brightmoor area and Southwest Detroit—that are struggling to adapt to changing landscapes. In part 3, Understanding Contemporary Space and Potential, contributors consider both the city’s ecological assets and its sociological fragmentation to add dimension to the current understanding of its emptiness. The volume’s epilogue offers a synopsis of the major points of the 2012 Detroit Future City report, the city’s own strategic blueprint for future land use. Mapping Detroit explores not only what happens when a large city loses its main industrial purpose and a major portion of its population but also what future might result from such upheaval. Containing some of the leading voices on Detroit’s history and future, Mapping Detroit will be informative reading for anyone interested in urban studies, geography, and recent American history.
Download or read book American City written by Robert Sharoff and published by Wayne State University Press. This book was released on 2005 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In the 1910s and 1920s there was more steel going up in Detroit than anywhere outside of New York and Chicago. The result was the country's first high-tech metropolis, a city of lavish monuments and glittering skyscrapers." "The list of major architects who designed buildings for Detroit includes Frank Lloyd Wright, Mies van der Rohe, Stanford White, Daniel Burnham, Cass Gilbert, Albert Kahn, Minoru Yamasaki, Philip Johnson, and numerous others." "Detroit's public buildings - its museums, libraries, schools, and monuments - are second to none in terms of their overall scale, materials, and detailing. Hotels, stores, theaters, and other commercial venues display a breezy cosmopolitanism consistent with the city's position as both a technology hub and a crossroads of immigration." "Overwhelmed by the sheer beauty of the buildings they encountered on a 2003 visit to downtown Detroit, writer Robert Sharoff and photographer William Zbaren were inspired to create American City: Detroit Architecture, 1845-2005, the first new large-format book on the city's architecture in more than thirty years." "The fact that many structures are either endangered or marginally in use makes the book all the more compelling. In 2005, the National Trust for Historic Preservation placed "the historic buildings of downtown Detroit" on the list of the country's most endangered landmarks." "The book also includes examples of interesting new architecture as well as numerous historic buildings from the 1920s and earlier that have been maintained or in some cases painstakingly restored."--BOOK JACKET.
Download or read book Design in America written by Robert Judson Clark and published by Metropolitan Museum of Art. This book was released on 1983 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This exhibition catalog documents the emergence of modern American design in the second quarter of the 20th century. Cranbrook was one of the few institutions in the United States that offered instruction in design during the 1920s and 30s and its influence on architecture, interior design, art and crafts after World War II was crucial and extensive. The exhibition includes over 200 objects and photo-panels and surveys the history of the Cranbrook facility, as well as the achievements of the teachers and students. Presenting the history of the Cranbrook community, it covers Eliel Saarinen's contribution to architecture and urban design, interior design and furniture, metalwork and bookbinding, textiles, ceramics, sculpture and painting. ISBN 0-89558-097-7 (pbk.); ISBN 0-87099-341-0 (pbk.) : $45.00 (For use only in the library).
Download or read book Canvas Detroit written by Julie Pincus and published by Wayne State University Press. This book was released on 2017-11-01 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detroit’s unique and partly abandoned cityscape has scarred its image around the world for decades. But in the last several years journalists have begun to view the city through a different lens, focusing on the wide range of contemporary artists finding inspiration amid the emptiness and adding a more complex chapter to the story of a city long labeled as a haunting symbol of U.S. economic decline. In Canvas Detroit, Julie Pincus and Nichole Christian combine vibrant full-color photography of the city’s much-buzzed-about art scene with thoughtful narrative that explores the art and artists that are re-creating Detroit. Canvas Detroit captures hundreds of pieces of artwork in many forms—including large-scale and small-scale murals, sculptures, portraits, light projections, wearable art, and installations (made with wood, glass, living plants, fiber, and fabric). Works are situated in both obvious and more hidden spaces, including on and in houses, garages, factories, alleyways, doors, and walls, while some structures have been entirely transformed into art. Pincus and Christian profile internationally known figures like Banksy, Matthew Barney, and Tyree Guyton; prominent Detroit artists such as Scott Hocking, Jerome Ferretti, and Robert Sestock; and collectives like Power House Productions, Hygenic Dress League, the Empowerment Plan, and Theatre Bizarre. Canvas Detroit also features contributions by Marion Jackson, John Gallagher, Michael H. Hodges, Rebecca R. Hart, and Linda Yablonsky that contextualize the current artistic moment in the city. This beautifully designed and informative volume showcases the stunning breadth and depth of artwork currently being done in Detroit. It will be essential reading for anyone interested in arts and culture in the city.
Download or read book Art Deco in Detroit written by Rebecca Binno Savage and published by Arcadia Publishing. This book was released on 2004 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1920s, Art Deco, or "The Modern Style," has delighted people with its innovative use of materials and designs that capture the spirit of optimism to create the style of the future. Although the Detroit metro area is primarily known as an industrial region, it boasts some of the finest examples of Art Deco in the country. Art Deco in Detroit explores the wide-ranging variety of these architectural marvels, from world-famous structures like the Fisher and Penobscot Buildings, to commercial buildings, theaters, homes, and churches. Through a panorama of photographs, authors Rebecca Binno Savage and Greg Kowalski take readers on a fascinating tour of this influential movement and its manifestations in and around Detroit. The grandeur evident in some of the major buildings reflects a time when artisans and architects collaborated to craft structures that transcend functionality-they endure as standing works of art.
Download or read book AIA Detroit written by Eric J. Hill and published by Wayne State University Press. This book was released on 2003 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: A beautifully designed resource that takes readers on a tour of greater Detroit's many architectural wonders and special landmarks.
Download or read book Michigan Modern written by Amy L. Arnold and published by Gibbs Smith. This book was released on 2016-10-04 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Michigan Modern: Design That Shaped America is an impressive collection of important essays touching on all aspects of Michigan’s architecture and design heritage. The Great Lakes State has always been known for its contributions to twentieth-century manufacturing, but it’s only beginning to receive wide attention for its contributions to Modern design and architecture. Brian D. Conway, Michigan’s State Historic Preservation Officer, and Amy L. Arnold, project manager for Michigan Modern, have curated nearly thirty essays and interviews from a number of prominent architects, academics, architectural historians, journalists, and designers, including historian Alan Hess, designers Mira Nakashima, Ruth Adler Schnee, and Todd Oldham, and architect Gunnar Birkerts, describing Michigan’s contributions to Modern design in architecture, automobiles, furniture and education.
Download or read book Detroit Architecture written by K. M. Meyer and published by . This book was released on 1971 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Detroit Architecture written by Katharine Mattingly Meyer and published by . This book was released on 1980 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design After Decline written by Brent D. Ryan and published by University of Pennsylvania Press. This book was released on 2012-05-22 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Almost fifty years ago, America's industrial cities—Detroit, Philadelphia, Cleveland, Baltimore, and others—began shedding people and jobs. Today they are littered with tens of thousands of abandoned houses, shuttered factories, and vacant lots. With population and housing losses continuing in the wake of the 2007 financial crisis, the future of neighborhoods in these places is precarious. How we will rebuild shrinking cities and what urban design vision will guide their future remain contentious and unknown. In Design After Decline, Brent D. Ryan reveals the fraught and intermittently successful efforts of architects, planners, and city officials to rebuild shrinking cities following mid-century urban renewal. With modern architecture in disrepute, federal funds scarce, and architects and planners disengaged, politicians and developers were left to pick up the pieces. In twin narratives, Ryan describes how America's two largest shrinking cities, Detroit and Philadelphia, faced the challenge of design after decline in dramatically different ways. While Detroit allowed developers to carve up the cityscape into suburban enclaves, Philadelphia brought back 1960s-style land condemnation for benevolent social purposes. Both Detroit and Philadelphia "succeeded" in rebuilding but at the cost of innovative urban design and planning. Ryan proposes that the unprecedented crisis facing these cities today requires a revival of the visionary thinking found in the best modernist urban design, tempered with the lessons gained from post-1960s community planning. Depicting the ideal shrinking city as a shifting patchwork of open and settled areas, Ryan concludes that accepting the inevitable decline and abandonment of some neighborhoods, while rebuilding others as new neighborhoods with innovative design and planning, can reignite modernism's spirit of optimism and shape a brighter future for shrinking cities and their residents.
Download or read book Detroit Speed s How to Build a Pro Touring Car written by Tommy Lee Byrd and published by CarTech Inc. This book was released on 2014-10-15 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trends in automotive modification come and go, some outlandish, some practical. Currently, the trend called "Pro Touring," while expensive, definitely leans toward the practical. Originally a term coined for GM cars, the term Pro Touring has come to mean a style of all cars, and many eras. Pro Touring is essentially the art of adding modern technology to aged designs, creating cars that stop, start, handle, drive, and behave just as modern performance cars do. You can do this in many ways and choose from many suppliers. Detroit Speed is at the forefront of the Pro Touring movement. Both a parts manufacturer and car builder, the company is in a unique position not only to design and manufacture parts, but to build cars and test the parts for their effectiveness on the street and track. Kyle and Stacy Tucker have put their considerable skill in engineering and market savvy to create a unique company to lead the Pro Touring movement. Not only do you learn about the history of the company and how they design their performance parts, install sections cover front sub-frame assemblies, rear suspension assemblies, wheel tubs, fuel system upgrades, brake upgrades, driveline upgrades including an LS swap, cooling system upgrades, and more. The featured cars are customer builds as well as DSE test cars, which include a host of different Chevrolet products, a 1966 Mustang and a 1969 Charger. Detroit Speed’s How to Build a Pro Touring Car is a vital edition to every performance enthusiast’s library.
Download or read book Design Remix written by Corey Damen Jenkins and published by Rizzoli Publications. This book was released on 2021-03-23 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book from AD100 interior designer Corey Damen Jenkins, known for his colorful, youthful traditionalism. Corey Damen Jenkins's bold interiors have won a devoted following. In his first book, he presents his take on classic interiors that have been beautifully reimagined for today's taste, sharing the building blocks of this fun, vibrant traditional look. "Bold Standard" is about how to use color in unexpected ways. "Good Bones" showcases architectural details. "Less Is More" focuses on creating a minimal look within a traditional interior. "Eclectic Exuberance" celebrates a collected appeal. "Night and Day" is a new look at the classic, graphic pairing of dark and light colors. "Haute House" looks at accessorizing with fashion-inspired elements. "Age Appropriate" is about creating rooms that cater to lounging, and nesting: kids' bedrooms, family rooms, reading nooks, homework areas. With sidebars on practical questions such as how to hang a salon-style picture wall and choosing the right window treatment, this is a must-have book for fans of a fresh, traditional look. With sidebars on practical questions such as how to hang a salon-style picture wall and choosing the right window treatment, this is a must-have book for fans of a fresh, traditional look.
Download or read book Art Deco in Detroit written by Rebecca Binno Savage and published by Arcadia Publishing. This book was released on 2004-01-20 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the 1920s, Art Deco, or "The Modern Style," has delighted people with its innovative use of materials and designs that capture the spirit of optimism to create the style of the future. Although the Detroit metro area is primarily known as an industrial region, it boasts some of the finest examples of Art Deco in the country. Art Deco in Detroit explores the wide-ranging variety of these architectural marvels, from world-famous structures like the Fisher and Penobscot Buildings, to commercial buildings, theaters, homes, and churches. Through a panorama of photographs, authors Rebecca Binno Savage and Greg Kowalski take readers on a fascinating tour of this influential movement and its manifestations in and around Detroit. The grandeur evident in some of the major buildings reflects a time when artisans and architects collaborated to craft structures that transcend functionality-they endure as standing works of art.
Download or read book Designing a World Class Architecture Firm written by Patrick MacLeamy and published by John Wiley & Sons. This book was released on 2020-04-14 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offers architects and creative services professionals exclusive insights and strategies for success from the former CEO of HOK. Designing a World Class Architecture Firm: The People, Stories and Strategies Behind HOK tells the history of one of the largest design firms in the world and draws lessons from it that can help other architects, interior designers, urban planners and creative services professionals grow bigger or better. Former HOK CEO Patrick MacLeamy shares the revolutionary strategies HOK’s founders deployed to create a brand-new type of architecture firm. He pulls no punches, revealing the triple crisis that almost bankrupted HOK and describes how any firm can survive and thrive. Designing a World Class Architecture Firm tells the inside story of many of HOK’s most iconic buildings, including the National Air and Space Museum, Moscone Convention Center, Oriole Park at Camden Yards, the Houston Galleria and the reimagined LaGuardia Airport. Each chapter conveys lessons learned from HOK’s successes —and failures— including: The importance of diversifying to depression-and-recession-proof your firm The benefit of organizing your firm around specialized leaders and project types The difference between leading and managing your people The value of simple financial metrics to ensure your firm’s health and profitability The “run toward trouble” strategy which prevents problems from ballooning MacLeamy delivers his advice via inspirational stories such as how HOK survived when its home office in St. Louis went up in flames and humorous stories, like the time an HOK executive was mistaken for royalty on a trip to Saudi Arabia. In this tell-all guide, the driven architecture or design professional will find the tools needed to evolve or grow any firm.
Download or read book All Printing Is Political written by Danielle Aubert and published by Inventory Press. This book was released on 2019-11-19 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely exploration of political organizing, publishing, design and distribution in 1970s Detroit In 1969, shortly after moving to Detroit with wife and partner Lorraine Nybakken, Fredy Perlman and a group of kindred spirits purchased a printing press from a Chicago dealer, transported it, in parts, back to Detroit in their cars and the Detroit Printing Co-op was born. Operating between 1969 and 1980 out of southwest Detroit, the Co-op was the site for the printing of the first English translation of Guy Debord's Society of the Spectacle and journals like Radical America, produced by the Students for a Democratic Society; books such as The Political Thought of James Forman printed by the League of Revolutionary Black Workers; and the occasional broadsheet, such as Judy Campbell's stirring indictment, "Open letter from 'white bitch' to the black youths who beat up on me and my friend." Fredy Perlman was not a printer or a designer by training, but was deeply engaged in the ideas, issues, processes and materiality of printing. While at the Detroit Printing Co-op, he radically rethought the possibilities of print by experimenting with overprinting, collage techniques, different kinds of papers and so on. Behind the calls to action and class consciousness written in his publications, there was an innate sense of the politics of design, experimentation and pride of craft. Building on research conducted by Danielle Aubert, a Detroit-based designer, educator and coauthor of Thanks for the view, Mr. Mies, The Politics of the Joy of Printing explores the history, output and legacy of the Perlmans and the Co-op in a highly illustrated testament to the power of printing, publishing, design and distribution.
