Download or read book Designing and Forming Custom Cartridges written by Ken Howell and published by Inkhorn (MT). This book was released on 1995-03-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cartridge Manufacture written by Douglas Thomas Hamilton and published by . This book was released on 1916 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chambering for Ackley Cartridges written by Fred Zeglin and published by 4D Reamer Rentals Limited. This book was released on 2016-04 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: This treatise discusses Ackley Improved cartridges. We will not teach you how to install and chamber a barrel here, we handle that information in, "Chambering Rifle Barrels for Accuracy". In this book we will in detail help you to understand the special details related to chambering for Ackley Improved designs.P.O. Ackley is the undisputed King of Improved cartridges and maybe of wildcats in general. He was active in gunsmithing from 1936 until his passing in 1989. Ackley was probably not the originator of fireformed "improved" cartridge designs, but he was definitely the guy who popularized it, and more importantly P.O. Ackley standardized the improved cartridge concept. What I mean by that is that he created a simple understandable headspace method for these designs.You will learn how to apply these simple principals.
Download or read book The Redwood Stumper 2011 written by Paul Feist and published by Paul Feist. This book was released on 2012-08-21 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Newsletter of the Redwood Gun Club in Humboldt County California. A newsletter dedicated to sharing the activities, interests, and knowledge of the membership of the club with our community. This is every issue of the "Redwood Stumper" from 2011
Download or read book Cartridge Manufacture written by Douglas T. Hamilton and published by Forgotten Books. This book was released on 2017-09-16 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Excerpt from Cartridge Manufacture: A Treatise Covering the Manufacture of Rifle Cartridge Cases, Bullets, Powders, Primers and Cartridge Clips, and the Designing and Making of the Tools Used in Connection With the Production of Cartridge Cases and Bullets, Together With a Description of Th The processes used in the manufacture of cartridges are of interest not only to the makers of munitions of war, but to every mechanic who is engaged in those industries in which the drawing and forming of metal in presses is of im portance. The principles and operations pertaining to the production of metal cartridges are essentially the same as those used in hundreds of industries engaged in the manu facture of drawn objects for the most peaceful purposes; and while at the present time the interest in ammunition is paramount, the methods used for its manufacture differ in no essential from the methods employed in the ordinary metal working industries. The aim of this book is, there fore, not only to cover the various steps in the manufacture of one of the most important of munitions of war, but also to place on record approved methods in the drawing and form ing of deep metal shells for any purpose. As the processes used in the manufacture of cartridges are probably more highly developed than those employed in most other fields of metal drawing, a book relating to these processes will no doubt be found of great value in many kindred fields. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Download or read book The Calibers written by Robert Sumner and published by Page Publishing, Inc. This book was released on 2022-08-01 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Calibers: Pistol gives a short history; known alias(es); pertinent historical data; background loading data, including best powders; best bullet weights, best load developed; velocity; muzzle energy; and resultant target for the best load developed. In the last section, the comments, Robert Sumner tells you about making cases from other calibers, whether the caliber is a keeper. Robert notes he has an adequate coverage for the more common and some not-so-common calibers.
Download or read book Wildcat Cartridges written by Fred Zeglin and published by Z-Hat Publishing. This book was released on 2022-04-02 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Reloader's Handbook of Wildcat Cartridge Design is a must have for all shooters regardless of their experience. For the hunter with one gun or collector with many, you will find valuable information on accuracy, designing, building, loading and shooting wildcats. Calibers start with the tiny .10 ranging to some brawny .50 calibers; there is something for every interest.Self reliant shooters and gunsmiths will learn how to make their own reamers and reloading dies in this book. If you desire to try out a new cartridge design you can be testing the new design in a day or two instead of weeks or months.Dimensioned drawings and loading data accompany cartridge descriptions. Historical cartridges as well as the newest and most popular designs are included. Chapters about important cartridge designers like P.O. Ackley, Jerry Gebby, Rocky Gibbs, and Charles Newton are important resources for the reloader and shooter alike."It's a rare technical treatise that draws you in with illustration, or that keeps you with an easy flow of chat that, were it lifted from print, might pop up at any gun counter or handloading bench. Wayne van Zwoll"For anyone interested in wildcat cartridges, this is a "must have" book. It's thorough, and it's up to date." Larry S. Sterett, Gun Week"One of the problems collectors often encounter when they purchase custom-made sporting rifles is the absence of commercially made ammunition for those arms... This book offers hope to just those collectors.Written by a professional gunsmith and cartridge maker, it examines the history of "wildcat cartridge" development. In addition to discussing vintage designs, such as those developed by P.O. Ackley, Jerry Gebby, and Charles Newton, the book covers more recent work carried out by Estergaard, Gibbs, Z-Hat, and more." Herbert G. Houze, Man at Arms Magazine, Vol. 28, No. 4, 2006"This is a fantastic book on American wildcats, US loads and much more. A must have for wildcatters and gunsmiths." Big Bore Journal, No. 18, June 2006
Download or read book The Redwood Stumper 2001 2009 written by Paul Feist and published by Paul Feist. This book was released on with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cartridge Manufacture written by Douglas Thomas Hamilton and published by . This book was released on 2014-03-16 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardcover reprint of the original 1916 edition - beautifully bound in brown cloth covers featuring titles stamped in gold, 8vo - 6x9". No adjustments have been made to the original text, giving readers the full antiquarian experience. For quality purposes, all text and images are printed as black and white. This item is printed on demand. Book Information: Hamilton, Douglas Thomas. Cartridge Manufacture; A Treatise Covering The Manufacture Of Rifle Cartridge Cases, Bullets, Powders, Primers And Cartridge Clips, And The Designing And Making Of The Tools Used In Connection With The Production Of Cartridge Cases And Bullets. Indiana: Repressed Publishing LLC, 2012. Original Publishing: Hamilton, Douglas Thomas. Cartridge Manufacture; A Treatise Covering The Manufacture Of Rifle Cartridge Cases, Bullets, Powders, Primers And Cartridge Clips, And The Designing And Making Of The Tools Used In Connection With The Production Of Cartridge Cases And Bullets, . New York, The Industrial Press, 1916. Subject: Cartridges
Download or read book P O Ackley written by Fred Zeglin and published by Gun Digest Books. This book was released on 2017 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: In P.O. Ackley: America's gunsmith, author Fred Zeglin's years of extensive research highlight not just the history of cartridge and rifle development, but an insider's look at a humble man who influenced nearly everything we know about shooting and ballistics today. P.O. Ackley's ideas om reloading, rifle accuracy, barrel making, cartridge choice, and wildcats are just as relevant for modern "gun cranks" as they were in Ackley's heyday. Zeglin delivers the most complete collection of accurate dimensions, loading data and history for the lifetime of cartridges created by P.O. Ackley, the most influential gunsmith in America. Most shooters know him today because of his "Ackley Improved" cartridge designs. But those cartridges are only the tip of the iceberg. P.O. Ackley: America's gunsmith is the whole story. Includes a full-color photo section and an exclusive never-before-printed article by P.O. Ackley. -- back cover.
Download or read book Reloader s Handbook of Wildcat Cartridge Design written by Fred Zeglin and published by Gun Digest Books. This book was released on 2024-04-23 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Textbook for Experimental Cartridge Design No matter yourreloading goals, Reloader's Handbook of WildcatCartridge Design, 2nd Edition, is the mostcomprehensive reference available for designing, building, loading and shootingwildcat cartridges. Calibers span the gamut, from the tiny .10 caliber to thebrawny .50 cal. There is something for every interest! Following the firstedition's success, this completely updated edition adds three new chapters,including modernized wildcats, recently developed proprietary and factorycartridges, ammunition sources, and options for procuring .22 rimfire ammo whenit is not commercially available, plus brass sources and specialty suppliers. Inside You'll Find: · Dimensioneddrawings and loading data · Detailedcartridge descriptions and performance · Historicalwildcat cartridges and new designs · Wildcatsvs. improved cartridges · Tooling,supplies and suppliers · P.O.Ackley and other wildcatter profiles! In Reloader's Handbook of Wildcat Cartridge Design, 2ndEdition, learn how to make your own reamers and reloading diesand design new cartridges, whether your goal is increased velocity, improvedaccuracy, more extended range, or better terminal performance on game!
Download or read book Hawk Cartridges Reloading Manual written by Fred D. Zeglin and published by . This book was released on 2011-07-01 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Zeglin has gathered years of pressure testing and shooting into a manual format that makes it easy for any reloader to form and fire Hawk Cartridge. This collection of data includes some new material and new cartridges in the Hawk line-up. There is no other resource for Hawk Cartridges that meets the needs of wildcatters, reloaders, and shooters everywhere.
Download or read book Democratizing Innovation written by Eric Von Hippel and published by MIT Press. This book was released on 2006-02-17 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of user-centered innovation: how it can benefit both users and manufacturers and how its emergence will bring changes in business models and in public policy. Innovation is rapidly becoming democratized. Users, aided by improvements in computer and communications technology, increasingly can develop their own new products and services. These innovating users—both individuals and firms—often freely share their innovations with others, creating user-innovation communities and a rich intellectual commons. In Democratizing Innovation, Eric von Hippel looks closely at this emerging system of user-centered innovation. He explains why and when users find it profitable to develop new products and services for themselves, and why it often pays users to reveal their innovations freely for the use of all.The trend toward democratized innovation can be seen in software and information products—most notably in the free and open-source software movement—but also in physical products. Von Hippel's many examples of user innovation in action range from surgical equipment to surfboards to software security features. He shows that product and service development is concentrated among "lead users," who are ahead on marketplace trends and whose innovations are often commercially attractive. Von Hippel argues that manufacturers should redesign their innovation processes and that they should systematically seek out innovations developed by users. He points to businesses—the custom semiconductor industry is one example—that have learned to assist user-innovators by providing them with toolkits for developing new products. User innovation has a positive impact on social welfare, and von Hippel proposes that government policies, including R&D subsidies and tax credits, should be realigned to eliminate biases against it. The goal of a democratized user-centered innovation system, says von Hippel, is well worth striving for. An electronic version of this book is available under a Creative Commons license.
Download or read book Out Of Control written by Kevin Kelly and published by Basic Books. This book was released on 2009-04-30 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Out of Control chronicles the dawn of a new era in which the machines and systems that drive our economy are so complex and autonomous as to be indistinguishable from living things.
Download or read book CARTRIDGE MANUFACTURE A TREATI written by Douglas Thomas 1885 Hamilton and published by Wentworth Press. This book was released on 2016-08-25 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Download or read book Cartridge Manufacture A Treatise Covering the Manufacture of Rifle Cartridge Cases Bullets Powders Primers and Cartridge Clips and the Designing written by Douglas Thomas Hamilton and published by Nabu Press. This book was released on 2014-02-26 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reproduction of a book published before 1923. This book may have occasional imperfections such as missing or blurred pages, poor pictures, errant marks, etc. that were either part of the original artifact, or were introduced by the scanning process. We believe this work is culturally important, and despite the imperfections, have elected to bring it back into print as part of our continuing commitment to the preservation of printed works worldwide. We appreciate your understanding of the imperfections in the preservation process, and hope you enjoy this valuable book.
Download or read book Cartridges for Collectors written by Fred A. Datig and published by . This book was released on 1963 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
