Download or read book Designing a Hydromechanical Transmission for Heavy Duty Trucks written by William A. Ross and published by . This book was released on 1972 with total page 6 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Subject Bibliography from Highway Safety Literature written by United States. National Highway Traffic Safety Administration and published by . This book was released on 1976 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control Aspects of Complex Hydromechanical Transmissions written by L. Viktor Larsson and published by Linköping University Electronic Press. This book was released on 2017-08-17 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis deals with control aspects of complex hydromechanical transmissions. The overall purpose is to increase the knowledge of important aspects to consider during the development of hydromechanical transmissions to ensure transmission functionality. These include ways of evaluating control strategies in early design stages as well as dynamic properties and control aspects of displacement controllers, which are key components in these systems. Fuel prices and environmental concerns are factors that drive research on propulsion in heavy construction machinery. Hydromechanical transmissions are strong competitors to conventional torque-converter transmissions used in this application today. They offer high efficiency and wide speed/torque conversion ranges, and may easily be converted to hybrids that allow further fuel savings through energy recuperation. One challenge with hydromechanical transmissions is that they offer many different configurations, which in turn makes it important to enable evaluation of control aspects in early design stages. In this thesis, hardware-in-the-loop simulations, which blend hardware tests and standard software-based simulations, are considered to be a suitable method. A multiple-mode transmission applied to a mid-sized construction machine is modelled and evaluated in offline simulations as well as in hardware-in-the-loopsimulations. Hydromechanical transmissions rely on efficient variable pumps/motors with fast, accurate displacement controllers. This thesis studies the dynamic behaviour of the displacement controller in swash-plate axial-piston pumps/motors. A novel control approach in which the displacement is measured with an external sensor is proposed. Performance and limitations of the approach are tested in simulations and in experiments. The experiments showed a significantly improved performance with a controller that is slightly more advanced than a standard proportional controller. The implementation of the controller allows simple tuning and good predictability of the displacement response.
Download or read book Dynamic Analysis and Control System Design of Automatic Transmissions written by Joel M Maguire and published by SAE International. This book was released on 2013-02-12 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the basic working principle and the mechanical construction of automatic transmissions has not changed significantly, increased requirements for performance, fuel economy, and drivability, as well as the increasing number of gears has made it more challenging to design the systems that control modern automatic transmissions. New types of transmissions—continuously variable transmissions (CVT), dual clutch transmissions (DCT), and hybrid powertrains—have presented added challenges. Gear shifting in today’s automatic transmissions is a dynamic process that involves synchronized torque transfer from one clutch to another, smooth engine speed change, engine torque management, and minimization of output torque disturbance. Dynamic analysis helps to understand gear shifting mechanics and supports creation of the best design for gear shift control systems in passenger cars, trucks, buses, and commercial vehicles. Based on the authors’ graduate-level teaching material, this well-illustrated book relays how the fundamental principles of hydraulics and control systems are applied to today’s automatic transmissions. It opens with coverage of basic automatic transmission mechanics and then details dynamics and controls associated with modern automatic transmissions. Topics covered include: gear shifting mechanics and controls, dynamic models of planetary automatic transmissions, design of hydraulic control systems, learning algorithms for achieving consistent shift quality, torque converter clutch controls, centrifugal pendulum vibration absorbers, friction launch controls, shift scheduling and integrated powertrain controls, continuously variable transmission ratio controls, dual-clutch transmission controls, and more. The book includes many equations and clearly explained examples. Sample Simulink models of various transmission mechanical, hydraulic and control subsystems are also provided. Chapter Two, which covers planetary gear automatic transmissions, includes homework questions, making it ideal for classroom use. In addition to students, new engineers will find the book helpful because it provides the basics of transmission dynamics and control. More experienced engineers will appreciate the theoretical discussions that will help elevate the reader’s knowledge. Although many automatic transmission-related books have been published, most focus on mechanical construction, operation principles, and control hardware. None tie the dynamic analysis, control system design, and analytic investigation of the mechanical, hydraulic, and electronic controls as does this book.
Download or read book Heavy Duty Wheeled Vehicles written by Boris Nikolaevich Belousov and published by SAE International. This book was released on 2014-01-27 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heavy-duty wheeled vehicles (HDWVs) are all-wheel-drive vehicles that carry 25 tons or more and have three or more axles. They transport heavy, bulky cargo such as raw minerals, timber, construction materials, pre-fabricated modules, weapons, combat vehicles, and more. HDWVs are used in a variety of industries (mining, logging, construction, energy) and are critical to a country’s economy and defense. These vehicles have unique development requirements due to their high loads, huge dimensions, and specific operating conditions. Hauling efficiencies can be improved by increasing vehicle load capacity; however capacities are influenced by legislation, road limits, and design. Designing HDWVs differs from other multi-purpose all-wheel-drive vehicles. The chassis must be custom-designed to suit the customer’s particular purpose. The number of axles is another variable, as well as which ones are driving and which are driven. Tires are also customizable. Translated by SAE from Russian, this book narrates the history of HDWVs and presents the theory and calculations required to design them. It summarizes results of the authors’ academic research and experience and presents innovative technical solutions used for electric and hydrostatic transmissions, steering systems, and active safety of these vehicles. The book consists of three parts. Part one covers HDWV design history and general design methods, including basic vehicle design, and evaluating HDWV use conditions. Part one also covers general operation requirements and consumer needs, and a brief analysis of structural components of existing HDWVs and prototypes. Part two outlines information needs for designing HDWVs. Part three reviews basic theory and calculation of innovative technical solutions, as well as special requirements for component parts. This comprehensive title provides the following information about HDWVs: • History of design and manufacture. • Manufacturers’ summary design data. • Background data on sample vehicles. • Component calculation examples. • Overview of motion theory, which is useful in design and placement of bulky cargo.
Download or read book Design of a Hydromechanical Transmission with Regeneration for a Passenger Vehicle written by Stephen Joseph Sedler and published by . This book was released on 2012 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Automotive Transmissions written by Harald Naunheimer and published by Springer Science & Business Media. This book was released on 2010-11-09 with total page 740 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a full account of the development process for automotive transmissions. Main topics: - Overview of the traffic – vehicle – transmission system - Mediating the power flow in vehicles - Selecting the ratios - Vehicle transmission systems - basic design principles - Typical designs of vehicle transmissions - Layout and design of important components, e.g. gearshifting mechanisms, moving-off elements, pumps, retarders - Transmission control units - Product development process, Manufacturing technology of vehicle transmissions, Reliability and testing The book covers manual, automated manual and automatic transmissions as well as continuously variable transmissions and hybrid drives for passenger cars and commercial vehicles. Furthermore, final drives, power take-offs and transfer gearboxes for 4-WD-vehicles are considered. Since the release of the first edition in 1999 there have been a lot of changes in the field of vehicles and transmissions. About 40% of the second edition’s content is new or revised with new data.
Download or read book Classical and Modern Mechanisms for Engineers and Inventors written by Jensen and published by Routledge. This book was released on 2018-05-04 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Jensen (mechanical engineering, Mankato State U., Minn.) is a prolific designer/interpreter/reporter of mechanisms for the user of mechanical movements. This collection offers solutions or inspirations in some 20 areas including the slider crank, cycloid, screw and clamping mechanisms, antibacklash
Download or read book Highway Safety Literature written by and published by . This book was released on 1979 with total page 926 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dynamic Analysis and Control System Design of Automatic Transmissions written by Joel M Maguire and published by SAE International. This book was released on 2013-02-12 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the basic working principle and the mechanical construction of automatic transmissions has not changed significantly, increased requirements for performance, fuel economy, and drivability, as well as the increasing number of gears has made it more challenging to design the systems that control modern automatic transmissions. New types of transmissions—continuously variable transmissions (CVT), dual clutch transmissions (DCT), and hybrid powertrains—have presented added challenges. Gear shifting in today’s automatic transmissions is a dynamic process that involves synchronized torque transfer from one clutch to another, smooth engine speed change, engine torque management, and minimization of output torque disturbance. Dynamic analysis helps to understand gear shifting mechanics and supports creation of the best design for gear shift control systems in passenger cars, trucks, buses, and commercial vehicles. Based on the authors’ graduate-level teaching material, this well-illustrated book relays how the fundamental principles of hydraulics and control systems are applied to today’s automatic transmissions. It opens with coverage of basic automatic transmission mechanics and then details dynamics and controls associated with modern automatic transmissions. Topics covered include: gear shifting mechanics and controls, dynamic models of planetary automatic transmissions, design of hydraulic control systems, learning algorithms for achieving consistent shift quality, torque converter clutch controls, centrifugal pendulum vibration absorbers, friction launch controls, shift scheduling and integrated powertrain controls, continuously variable transmission ratio controls, dual-clutch transmission controls, and more. The book includes many equations and clearly explained examples. Sample Simulink models of various transmission mechanical, hydraulic and control subsystems are also provided. Chapter Two, which covers planetary gear automatic transmissions, includes homework questions, making it ideal for classroom use. In addition to students, new engineers will find the book helpful because it provides the basics of transmission dynamics and control. More experienced engineers will appreciate the theoretical discussions that will help elevate the reader’s knowledge. Although many automatic transmission-related books have been published, most focus on mechanical construction, operation principles, and control hardware. None tie the dynamic analysis, control system design, and analytic investigation of the mechanical, hydraulic, and electronic controls as does this book.
Download or read book Highway Safety Literature written by and published by . This book was released on 1973 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transmissions and Drivetrain Design written by Michael Hilgers and published by Springer Nature. This book was released on 2021-02-26 with total page 62 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this work, consisting of 9 individual, self-contained booklets, is to describe commercial vehicle technology in a way that is clear, concise and illustrative. Compact and easy to understand, it provides an overview of the technology that goes into modern commercial vehicles. Starting from the customer's fundamental requirements, the characteristics and systems that define the design of the vehicles are presented knowledgeably in a series of articles, each of which can be read and studied on their own. This volume, Transmissions and Drivetrain Design, begins with an explanation of how driving resistance and the engine characteristics factor into the configuration of the transmission and transmission ratios. The transmission and its associated assemblies are presented in detail, providing a clear understanding for training and practical applications. Other components of the drivetrain such as the propeller shaft, the clutch and the retarder are also discussed.
Download or read book Advanced Hybrid Powertrains for Commercial Vehicles written by Haoran Hu and published by SAE International. This book was released on 2021-04-14 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powertrains for commercial vehicles have evolved since the late nineteenth-century invention of the ICE. In the revised second edition of Advanced Hybrid Powertrains for Commercial Vehicles, the authors explore commercial powertrains through history from the ICE through the introduction of the hybrid powertrain in commercial vehicles. Readers are given an understanding of the ICE as well as the classification of commercial vehicle hybrid powertrains, the variety of energy storage systems, fuel-cell hybrid powertrain systems, and commercial vehicle electrification. The authors review the legislation of vehicle emissions and the regulation necessary to promote the production of fuel-efficient vehicles.
Download or read book Heavy Duty Vehicles written by Lois Flynn and published by . This book was released on 1979 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book SAE Journal of Automotive Engineering written by Society of Automotive Engineers and published by . This book was released on 1972-07 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Aided Design of Flywheel Transmission Systems written by Dongmin Xie and published by . This book was released on 1989 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.
