Download or read book Linear and Nonlinear Control of Small Scale Unmanned Helicopters written by Ioannis A. Raptis and published by Springer Science & Business Media. This book was released on 2010-09-28 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: There has been significant interest for designing flight controllers for small-scale unmanned helicopters. Such helicopters preserve all the physical attributes of their full-scale counterparts, being at the same time more agile and dexterous. This book presents a comprehensive and well justified analysis for designing flight controllers for small-scale unmanned helicopters guarantying flight stability and tracking accuracy. The design of the flight controller is a critical and integral part for developing an autonomous helicopter platform. Helicopters are underactuated, highly nonlinear systems with significant dynamic coupling that needs to be considered and accounted for during controller design and implementation. Most reliable mathematical tools for analysis of control systems relate to modern control theory. Modern control techniques are model-based since the controller architecture depends on the dynamic representation of the system to be controlled. Therefore, the flight controller design problem is tightly connected with the helicopter modeling. This book provides a step-by-step methodology for designing, evaluating and implementing efficient flight controllers for small-scale helicopters. Design issues that are analytically covered include: • An illustrative presentation of both linear and nonlinear models of ordinary differential equations representing the helicopter dynamics. A detailed presentation of the helicopter equations of motion is given for the derivation of both model types. In addition, an insightful presentation of the main rotor's mechanism, aerodynamics and dynamics is also provided. Both model types are of low complexity, physically meaningful and capable of encapsulating the dynamic behavior of a large class of small-scale helicopters. • An illustrative and rigorous derivation of mathematical control algorithms based on both the linear and nonlinear representation of the helicopter dynamics. Flight controller designs guarantee that the tracking objectives of the helicopter's inertial position (or velocity) and heading are achieved. Each controller is carefully constructed by considering the small-scale helicopter's physical flight capabilities. Concepts of advanced stability analysis are used to improve the efficiency and reduce the complexity of the flight control system. Controller designs are derived in both continuous time and discrete time covering discretization issues, which emerge from the implementation of the control algorithm using microprocessors. • Presentation of the most powerful, practical and efficient methods for extracting the helicopter model parameters based on input/output responses, collected by the measurement instruments. This topic is of particular importance for real-life implementation of the control algorithms. This book is suitable for students and researches interested in the development and the mathematical derivation of flight controllers for small-scale helicopters. Background knowledge in modern control is required.

Download or read book Autonomous Flying Robots written by Kenzo Nonami and published by Springer Science & Business Media. This book was released on 2010-09-15 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advance in robotics has boosted the application of autonomous vehicles to perform tedious and risky tasks or to be cost-effective substitutes for their - man counterparts. Based on their working environment, a rough classi cation of the autonomous vehicles would include unmanned aerial vehicles (UAVs), - manned ground vehicles (UGVs), autonomous underwater vehicles (AUVs), and autonomous surface vehicles (ASVs). UAVs, UGVs, AUVs, and ASVs are called UVs (unmanned vehicles) nowadays. In recent decades, the development of - manned autonomous vehicles have been of great interest, and different kinds of autonomous vehicles have been studied and developed all over the world. In part- ular, UAVs have many applications in emergency situations; humans often cannot come close to a dangerous natural disaster such as an earthquake, a ood, an active volcano, or a nuclear disaster. Since the development of the rst UAVs, research efforts have been focused on military applications. Recently, however, demand has arisen for UAVs such as aero-robotsand ying robotsthat can be used in emergency situations and in industrial applications. Among the wide variety of UAVs that have been developed, small-scale HUAVs (helicopter-based UAVs) have the ability to take off and land vertically as well as the ability to cruise in ight, but their most importantcapability is hovering. Hoveringat a point enables us to make more eff- tive observations of a target. Furthermore, small-scale HUAVs offer the advantages of low cost and easy operation.

Download or read book Autonomous Control Systems and Vehicles written by Kenzo Nonami and published by Springer Science & Business Media. This book was released on 2013-05-30 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: The International Conference on Intelligent Unmanned Systems 2011 was organized by the International Society of Intelligent Unmanned Systems and locally by the Center for Bio-Micro Robotics Research at Chiba University, Japan. The event was the 7th conference continuing from previous conferences held in Seoul, Korea (2005, 2006), Bali, Indonesia (2007), Nanjing, China (2008), Jeju, Korea (2009), and Bali, Indonesia (2010). ICIUS 2011 focused on both theory and application, primarily covering the topics of robotics, autonomous vehicles, intelligent unmanned technologies, and biomimetics. We invited seven keynote speakers who dealt with related state-of-the-art technologies including unmanned aerial vehicles (UAVs) and micro air vehicles (MAVs), flapping wings (FWs), unmanned ground vehicles (UGVs), underwater vehicles (UVs), bio-inspired robotics, advanced control, and intelligent systems, among others. This book is a collection of excellent papers that were updated after presentation at ICIUS2011. All papers that form the chapters of this book were reviewed and revised from the perspective of advanced relevant technologies in the field. The aim of this book is to stimulate interactions among researchers active in the areas pertinent to intelligent unmanned systems.

Download or read book Autonomous Safety Control of Flight Vehicles written by Xiang Yu and published by CRC Press. This book was released on 2021-02-12 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aerospace vehicles are by their very nature a crucial environment for safety-critical systems. By virtue of an effective safety control system, the aerospace vehicle can maintain high performance despite the risk of component malfunction and multiple disturbances, thereby enhancing aircraft safety and the probability of success for a mission. Autonomous Safety Control of Flight Vehicles presents a systematic methodology for improving the safety of aerospace vehicles in the face of the following occurrences: a loss of control effectiveness of actuators and control surface impairments; the disturbance of observer-based control against multiple disturbances; actuator faults and model uncertainties in hypersonic gliding vehicles; and faults arising from actuator faults and sensor faults. Several fundamental issues related to safety are explicitly analyzed according to aerospace engineering system characteristics; while focusing on these safety issues, the safety control design problems of aircraft are studied and elaborated on in detail using systematic design methods. The research results illustrate the superiority of the safety control approaches put forward. The expected reader group for this book includes undergraduate and graduate students but also industry practitioners and researchers. About the Authors: Xiang Yu is a Professor with the School of Automation Science and Electrical Engineering, Beihang University, Beijing, China. His research interests include safety control of aerospace engineering systems, guidance, navigation, and control of unmanned aerial vehicles. Lei Guo, appointed as "Chang Jiang Scholar Chair Professor", is a Professor with the School of Automation Science and Electrical Engineering, Beihang University, Beijing, China. His research interests include anti-disturbance control and filtering, stochastic control, and fault detection with their applications to aerospace systems. Youmin Zhang is a Professor in the Department of Mechanical, Industrial and Aerospace Engineering, Concordia University, Montreal, Québec, Canada. His research interests include fault diagnosis and fault-tolerant control, and cooperative guidance, navigation, and control (GNC) of unmanned aerial/space/ground/surface vehicles. Jin Jiang is a Professor in the Department of Electrical & Computer Engineering, Western University, London, Ontario, Canada. His research interests include fault-tolerant control of safety-critical systems, advanced control of power plants containing non-traditional energy resources, and instrumentation and control for nuclear power plants.

Download or read book Frontiers of Model Predictive Control written by Tao Zheng and published by BoD – Books on Demand. This book was released on 2012-02-24 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control (MPC) usually refers to a class of control algorithms in which a dynamic process model is used to predict and optimize process performance, but it is can also be seen as a term denoting a natural control strategy that matches the human thought form most closely. Half a century after its birth, it has been widely accepted in many engineering fields and has brought much benefit to us. The purpose of the book is to show the recent advancements of MPC to the readers, both in theory and in engineering. The idea was to offer guidance to researchers and engineers who are interested in the frontiers of MPC. The examples provided in the first part of this exciting collection will help you comprehend some typical boundaries in theoretical research of MPC. In the second part of the book, some excellent applications of MPC in modern engineering field are presented. With the rapid development of modeling and computational technology, we believe that MPC will remain as energetic in the future.

Download or read book Recent Advances in Sliding Modes From Control to Intelligent Mechatronics written by Xinghuo Yu and published by Springer. This book was released on 2015-04-10 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is dedicated to Professor Okyay Kaynak to commemorate his life time impactful research and scholarly achievements and outstanding services to profession. The 21 invited chapters have been written by leading researchers who, in the past, have had association with Professor Kaynak as either his students and associates or colleagues and collaborators. The focal theme of the volume is the Sliding Modes covering a broad scope of topics from theoretical investigations to their significant applications from Control to Intelligent Mechatronics.

Download or read book Unmanned Rotorcraft Systems written by Guowei Cai and published by Springer Science & Business Media. This book was released on 2011-06-01 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned Rotorcraft Systems explores the research and development of fully-functional miniature UAV (unmanned aerial vehicle) rotorcraft, and provides a complete treatment of the design of autonomous miniature rotorcraft UAVs. The unmanned system is an integration of advanced technologies developed in communications, computing, and control areas, and is an excellent testing ground for trialing and implementing modern control techniques. Included are detailed expositions of systematic hardware construction, software systems integration, aerodynamic modeling; and automatic flight control system design. Emphasis is placed on the cooperative control and flight formation of multiple UAVs, vision-based ground target tracking, and landing on moving platforms. Other issues such as the development of GPS-less indoor micro aerial vehicles and vision-based navigation are also discussed in depth: utilizing the vision-based system for accomplishing ground target tracking, attacking and landing, cooperative control and flight formation of multiple unmanned rotorcraft; and future research directions on the related areas.

Download or read book Controller Tuning with Evolutionary Multiobjective Optimization written by Gilberto Reynoso Meza and published by Springer. This book was released on 2016-11-04 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to Multiobjective Optimization Design (MOOD) procedures for controller tuning applications, by means of Evolutionary Multiobjective Optimization (EMO). It presents developments in tools, procedures and guidelines to facilitate this process, covering the three fundamental steps in the procedure: problem definition, optimization and decision-making. The book is divided into four parts. The first part, Fundamentals, focuses on the necessary theoretical background and provides specific tools for practitioners. The second part, Basics, examines a range of basic examples regarding the MOOD procedure for controller tuning, while the third part, Benchmarking, demonstrates how the MOOD procedure can be employed in several control engineering problems. The fourth part, Applications, is dedicated to implementing the MOOD procedure for controller tuning in real processes.

Download or read book Applied Control Systems Design written by Magdi S. Mahmoud and published by Springer Science & Business Media. This book was released on 2012-04-13 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applied Control System Design examines several methods for building up systems models based on real experimental data from typical industrial processes and incorporating system identification techniques. The text takes a comparative approach to the models derived in this way judging their suitability for use in different systems and under different operational circumstances. A broad spectrum of control methods including various forms of filtering, feedback and feedforward control is applied to the models and the guidelines derived from the closed-loop responses are then composed into a concrete self-tested recipe to serve as a check-list for industrial engineers or control designers. System identification and control design are given equal weight in model derivation and testing to reflect their equality of importance in the proper design and optimization of high-performance control systems. Readers’ assimilation of the material discussed is assisted by the provision of problems and examples. Most of these exercises use MATLAB® to make computation and visualization more straightforward. Applied Control System Design will be of interest to academic researchers for its comparison of different systems models and their response to different control methods and will assist graduate students in learning the practical necessities of advanced control system design. The consistent reference to real systems coupled with self-learning tools will assist control practitioners who wish to keep up to date with the latest control design ideas.

Download or read book Robotics Research written by Henrik I. Christensen and published by Springer. This book was released on 2016-08-25 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents a collection of papers presented at the 15th International Symposium of Robotic Research (ISRR). ISRR is the biennial meeting of the International Foundation of Robotic Research (IFRR) and its 15th edition took place in Flagstaff, Arizona on December 9 to December 12, 2011. As for the previous symposia, ISRR 2011 followed up on the successful concept of a mixture of invited contributions and open submissions. Therefore approximately half of the 37 contributions were invited contributions from outstanding researchers selected by the IFRR officers and the program committee, and the other half were chosen among the open submissions after peer review. This selection process resulted in a truly excellent technical program which featured some of the very best of robotic research. The program was organized around oral presentation in a single-track format and included for the first time a small number of interactive presentations. The symposium contributions contained in this volume report on a variety of new robotics research results covering a broad spectrum including perception, manipulation, grasping, vehicles and design, navigation, control and integration, estimation and SLAM.

Download or read book Intelligent Computing and Information Science written by Ran Chen and published by Springer. This book was released on 2010-12-25 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set (CCIS 134 and CCIS 135) constitutes the refereed proceedings of the International Conference on Intelligent Computing and Information Science, ICICIS2011, held in Chongqing, China, in January 2011. The 226 revised full papers presented in both volumes, CCIS 134 and CCIS 135, were carefully reviewed and selected from over 600 initial submissions. The papers provide the reader with a broad overview of the latest advances in the field of intelligent computing and information science.

Download or read book ROBOT2013 First Iberian Robotics Conference written by Manuel A. Armada and published by Springer Science & Business Media. This book was released on 2013-11-12 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the proceedings of the ROBOT 2013: FIRST IBERIAN ROBOTICS CONFERENCE and it can be said that included both state of the art and more practical presentations dealing with implementation problems, support technologies and future applications. A growing interest in Assistive Robotics, Agricultural Robotics, Field Robotics, Grasping and Dexterous Manipulation, Humanoid Robots, Intelligent Systems and Robotics, Marine Robotics, has been demonstrated by the very relevant number of contributions. Moreover, ROBOT2013 incorporates a special session on Legal and Ethical Aspects in Robotics that is becoming a topic of key relevance. This Conference was held in Madrid (28-29 November 2013), organized by the Sociedad Española para la Investigación y Desarrollo en Robótica (SEIDROB) and by the Centre for Automation and Robotics - CAR (Universidad Politécnica de Madrid (UPM) and Consejo Superior de Investigaciones Científicas (CSIC)), along with the co-operation of Grupo Temático de Robótica CEA-GTRob, "Sociedade Portuguesa de Robotica" (SPR), "Asociación Española de Promoción de la Investigación en Agentes Físicos" (RedAF), and partially supported by "Comunidad de Madrid under RoboCity2030 Programme".

Download or read book Intelligent Unmanned Systems Theory and Applications written by Agus Budiyono and published by Springer. This book was released on 2009-03-03 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book largely represents the extended version of select papers from the Inter- tional Conference on Intelligent Unmanned System ICIUS 2007 which was jointly organized by the Center for Unmanned System Studies at Institut Teknologi Bandung, Artificial Muscle Research Center at Konkuk University and Institute of Bio-inspired Structure and Surface Engineering, Nanjing University of Aeronautics and Astrona- ics. The joint-event was the 3rd conference extending from International Conference on Emerging System Technology (ICEST) in 2005 and International Conference on Technology Fusion (ICTF) in 2006 both conducted in Seoul. ICIUS 2007 was focused on both theory and application primarily covering the topics on robotics, autonomous vehicles and intelligent unmanned technologies. The conference was arranged into three parallel symposia with the following scope of topics: Unmanned Systems: Micro air vehicle, Underwater vehicle, Micro-satellite, - manned aerial vehicle, Multi-agent systems, Autonomous ground vehicle, Blimp, Swarm intelligence, learning and control Robotics and Biomimetics: Artificial muscle actuators, Smart sensors, Design and applications of MEMS/NEMS system, Intelligent robot system, Evolutionary al- rithm, Control of biological systems, AI and expert systems, Biological learning control systems, Neural networks, Genetic algorithm Control and Intelligent System: Distributed intelligence, Distributed/decentralized intelligent control, Distributed or decentralized control methods, Distributed and - bedded systems, Embedded intelligent control, Complex systems, Discrete event s- tems, Hybrid systems, Networked control systems, Delay systems, Fuzzy systems, Identification and estimation, Nonlinear systems, Precision motion control, Control applications, Control engineering education.

Download or read book Identification Modeling and Characteristics of Miniature Rotorcraft written by Bernard Mettler and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Identification Modeling and Characteristics of Miniature Rotorcraft introduces an approach to developing a simple and effective linear parameterized model of vehicle dynamics using the CIFERâ identification tool created by the Army/NASA Rotorcraft Division. It also presents the first application of the advanced control system optimization tool CONDUITâ to systematically and efficiently tune control laws for a model-scale UAV helicopter against multiple and competing dynamic response criteria. Identification Modeling and Characteristics of Miniature Rotorcraft presents the detailed account of how the theory was developed, the experimentation performed, and how the results were used. This book will serve as a basic and illustrative guide for all students that are interested in developing autonomous flying helicopters.

Download or read book Disturbance Observer Based Control written by Shihua Li and published by CRC Press. This book was released on 2016-04-19 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its abilities to compensate disturbances and uncertainties, disturbance observer based control (DOBC) is regarded as one of the most promising approaches for disturbance-attenuation. One of the first books on DOBC, Disturbance Observer Based Control: Methods and Applications presents novel theory results as well as best practices for applica

Download or read book Unmanned Aircraft Systems written by Kimon P. Valavanis and published by Springer Science & Business Media. This book was released on 2008-12-21 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unmanned Aircraft Systems (UAS) have seen unprecedented levels of growth during the last decade in both military and civilian domains. It is anticipated that civilian applications will be dominant in the future, although there are still barriers to be overcome and technical challenges to be met. Integrating UAS into, for example, civilian space, navigation, autonomy, see-detect-and-avoid systems, smart designs, system integration, vision-based navigation and training, to name but a few areas, will be of prime importance in the near future. This special volume is the outcome of research presented at the International Symposium on Unmanned Aerial Vehicles, held in Orlando, Florida, USA, from June 23-25, 2008, and presents state-of-the-art findings on topics such as: UAS operations and integration into the national airspace system; UAS navigation and control; micro-, mini-, small UAVs; UAS simulation testbeds and frameworks; UAS research platforms and applications; UAS applications. This book aims at serving as a guide tool on UAS for engineers and practitioners, academics, government agencies and industry. Previously published in the Journal of Intelligent and Robotic Systems, 54 (1-3, 2009).

Download or read book 2001 IEEE AIAA 20th Digital Avionics Systems Conference written by Institute of Electrical and Electronics Engineers and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 2001 with total page 970 pages. Available in PDF, EPUB and Kindle. Book excerpt: These volumes contain the conference proceedings from the 2001 20th Digital Avionics Systems Conference.