Download or read book Dissertation Abstracts International written by and published by . This book was released on 2001 with total page 834 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Partially Auxetic Metamaterial Inspired by the Maltese Cross written by Teik-Cheng Lim and published by Cambridge University Press. This book was released on 2022-09-15 with total page 139 pages. Available in PDF, EPUB and Kindle. Book excerpt: A partially-auxetic metamaterial is introduced, inspired by the Maltese cross. Each unit of this metamaterial consists of a pair of counter-rotating equal-armed crosses, which is interconnected to neighboring units via hinge rods and connecting rods. Based on linkage theory, the on-axes Poisson's ratio was established considering a two-fold symmetrical mechanism, while the (anti)tetrachiral mechanisms were identified for on-axes uniaxial compression. A shearing mechanism is suggested for pure shearing and diagonal loading of the metamaterial with square array. Results suggest that the approximated infinitesimal models are valid for the Poisson's ratio of the two-fold symmetrical and the (anti)tetrachiral mechanisms under on-axis tension and compression, respectively; however, the finite model is recommended for quantifying the Poisson's ratio under pure shear and off-axis loading. This metamaterial manifests microstructural trinity, in which three different loading modes result in three different groups of deformation mechanisms. Finally, suggestions are put forth for some unsolved predictive problems.

Download or read book American Doctoral Dissertations written by and published by . This book was released on 2000 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Auxetic Materials and Structures written by Teik-Cheng Lim and published by Springer. This book was released on 2014-12-27 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book lays down the foundation on the mechanics and design of auxetic solids and structures, solids that possess negative Poisson’s ratio. It will benefit two groups of readers: (a) industry practitioners, such as product and structural designers, who need to control mechanical stress distributions using auxetic materials, and (b) academic researchers and students who intend to produce unique mechanical and other physical properties of structures using auxetic materials.

Download or read book Liquid Crystal Elastomers written by Mark Warner and published by Oxford University Press. This book was released on 2007-04-05 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text is a primer for liquid crystals, polymers, rubber and elasticity. It is directed at physicists, chemists, material scientists, engineers and applied mathematicians at the graduate student level and beyond.

Download or read book Polyurethane Shape Memory Polymers written by W.M. Huang and published by CRC Press. This book was released on 2011-09-08 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shape memory polymers (SMPs) are some of the most important and valuable engineering materials developed in the last 25 years. These fascinating materials demonstrate remarkably versatile properties-including capacity for actuation and stimulus responsiveness-that are enabling technologists to develop applications used to explore everything from th

Download or read book Fundamentals of Smart Materials written by Mohsen Shahinpoor and published by Royal Society of Chemistry. This book was released on 2020-04-22 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers the fundamentals of different functional material systems aimed at advanced undergraduate and postgraduate students. Each chapter includes an introduction to the material, its applications and uses with example problems, fabrication and manufacturing techniques, conclusions, homework problems and a bibliography. Edited by a leading researcher in smart materials, topics include piezoelectric materials, magnetostrictive materials, shape memory alloys, mechanochromic materials, chemomechanical polymers and self-healing materials.

Download or read book Hydrogen Bonded Polymers written by Wolfgang Binder and published by Springer Science & Business Media. This book was released on 2007-03-16 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control of polymeric structure is among the most important endeavours of modern macromolecular science. In particular, tailoring the positioning and strength of intermolecular forces within macromolecules by synthetic methods and thus gaining structural control over the final polymeric materials has become feasible, resulting in the field of supramolecular polymer science. Besides other intermolecular forces, hydrogen bonds are unique intermolecular forces enabling the tuning of material properties via self-assembly processes over a wide range of interactions strength ranging from several kJmol to several tens of kJmol . Central for the formation of these structures are precursor molecules of small molecular weight (usually lower than 10 000), which can assemble in solid or solution to aggregates of defined geometry.

Download or read book Textiles for Advanced Applications written by Bipin Kumar and published by BoD – Books on Demand. This book was released on 2017-09-20 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a global view of the development and applications of technical textiles with the description of materials, structures, properties, characterizations, functions and relevant production technologies, case studies, challenges, and opportunities. Technical textile is a transformative research area, dealing with the creation and studies of new generations of textiles that hoist many new scientific and technological challenges that have never been encountered before. The book emphasizes more on the principles of textile science and technology to provide solutions to several engineering problems. All chapter topics are exclusive and selectively chosen and designed, and they are extensively explored by different authors having specific knowledge in each area.

Download or read book The Role of Topology in Materials written by Sanju Gupta and published by . This book was released on 2018 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the most important advances in the class of topological materials and discusses the topological characterization, modeling and metrology of materials. Further, it addresses currently emerging characterization techniques such as optical and acoustic, vibrational spectroscopy (Brillouin, infrared, Raman), electronic, magnetic, fluorescence correlation imaging, laser lithography, small angle X-ray and neutron scattering and other techniques, including site-selective nanoprobes. The book analyzes the topological aspects to identify and quantify these effects in terms of topology metrics. The topological materials are ubiquitous and range from (i) de novo nanoscale allotropes of carbons in various forms such as nanotubes, nanorings, nanohorns, nanowalls, peapods, graphene, etc. to (ii) metallo-organic frameworks, (iii) helical gold nanotubes, (iv) Möbius conjugated polymers, (v) block co-polymers, (vi) supramolecular assemblies, to (vii) a variety of biological and soft-matter systems, e.g. foams and cellular materials, vesicles of different shapes and genera, biomimetic membranes, and filaments, (viii) topological insulators and topological superconductors, (ix) a variety of Dirac materials including Dirac and Weyl semimetals, as well as (x) knots and network structures. Topological databases and algorithms to model such materials have been also established in this book. In order to understand and properly characterize these important emergent materials, it is necessary to go far beyond the traditional paradigm of microscopic structure-property-function relationships to a paradigm that explicitly incorporates topological aspects from the outset to characterize and/or predict the physical properties and currently untapped functionalities of these advanced materials. Simulation and modeling tools including quantum chemistry, molecular dynamics, 3D visualization and tomography are also indispensable. These concepts have found applications in condensed matter physics, materials science and engineering, physical chemistry and biophysics, and the various topics covered in the book have potential applications in connection with novel synthesis techniques, sensing and catalysis. As such, the book offers a unique resource for graduate students and researchers alike.

Download or read book Materials Chemistry written by Bradley D. Fahlman and published by Springer. This book was released on 2018-08-28 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this successful textbook continues to build on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field — in a concise format. The 3rd edition offers significant updates throughout, with expanded sections on sustainability, energy storage, metal-organic frameworks, solid electrolytes, solvothermal/microwave syntheses, integrated circuits, and nanotoxicity. Most appropriate for Junior/Senior undergraduate students, as well as first-year graduate students in chemistry, physics, or engineering fields, Materials Chemistry may also serve as a valuable reference to industrial researchers. Each chapter concludes with a section that describes important materials applications, and an updated list of thought-provoking questions.

Download or read book Metamaterials with Negative Parameters written by Ricardo Marqués and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first general textbook to offer a complete overview of metamaterial theory and its microwave applications Metamaterials with Negative Parameters represents the only unified treatment of metamaterials available in one convenient book. Devoted mainly to metamaterials that can be characterized by a negative effective permittivity and/or permeability, the book includes a wide overview of the most important topics, scientific fundamentals, and technical applications of metamaterials. Chapter coverage includes: the electrodynamics of left-handed media, synthesis of bulk metamaterials, synthesis of metamaterials in planar technology, microwave applications of metamaterial concepts, and advanced and related topics, including SRR- and CSRR-based admittance surfaces, magneto- and electro-inductive waves, and sub-diffraction imaging devices. A list of problems and references is included at the end of each chapter, and a bibliography offers a complete, up-to-daterepresentation of the current state of the art in metamaterials. Geared toward students and professionals alike, Metamaterials with Negative Parameters is an ideal textbook for postgraduate courses and also serves as a valuable introductory reference for scientists and RF/microwave engineers.

Download or read book Two dimensional Materials written by Pramoda Kumar Nayak and published by BoD – Books on Demand. This book was released on 2016-08-31 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are only a few discoveries and new technologies in materials science that have the potential to dramatically alter and revolutionize our material world. Discovery of two-dimensional (2D) materials, the thinnest form of materials to ever occur in nature, is one of them. After isolation of graphene from graphite in 2004, a whole other class of atomically thin materials, dominated by surface effects and showing completely unexpected and extraordinary properties, has been created. This book provides a comprehensive view and state-of-the-art knowledge about 2D materials such as graphene, hexagonal boron nitride (h-BN), transition metal dichalcogenides (TMD) and so on. It consists of 11 chapters contributed by a team of experts in this exciting field and provides latest synthesis techniques of 2D materials, characterization and their potential applications in energy conservation, electronics, optoelectronics and biotechnology.

Download or read book Liquid Crystalline Polymers written by Xin-Jiu Wang and published by World Scientific. This book was released on 2004 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook consists of six chapters. The first chapter highlights the concept of liquid crystals, including chemical structure, phase classification, defect and texture, and continuum theory. It has been carefully written to meet the needs of readers who do not specialize in liquid crystals. The second chapter is related to the theoretical description of liquid crystalline polymers, networks, and gels, which deals with subjects such as the formation of liquid crystallinity in the polymer system, the phase transition and phase diagram, the molecular weight effect, chain conformation, physics properties, etc. In Chapter 3, the molecular engineering of liquid crystalline polymers is introduced. The molecular composition and the molecular weight play essential roles in the molecular design, which are reviewed in detail. In addition, some unusual liquid crystalline polymers are discussed. Chapter 4 is devoted to the phase identification of liquid crystalline polymers. The techniques involved cover polarizing microscopy, thermal analysis, X-ray diffraction, and other areas. Chapters 5 and 6 summarize the properties and applications of liquid crystalline polymers: Chapter 5 deals mainly with mechanical performance in fiber and composites; Chapter 6 presents the elasticity, viscosity and rheology of liquid crystalline polymers, as well as other important properties.

Download or read book High Performance and Specialty Fibers written by Japan The Society of Fiber Science and Techno and published by Springer. This book was released on 2016-08-16 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews the key technologies and characteristics of the modern man-made specialty fibers mainly developed in Japan. Since the production of many low-cost man-made fibers shifted to China and other Asian countries, Japanese companies have focused on production of high-quality, high-performance super fibers as well as highly functionalized fibers so-called ‘Shin-gosen’. ZylonTM and DyneemaTM manufactured by Toyobo, TechnoraTM produced by Teijin, and VectranTM developed by Kuraray are those examples of super fibers. Carbon fibers ToraycaTM from Toray have occupied the most advanced high-performance application area. Various types of polyester fibers having design-shaped cross-sections and special fiber morphologies and those showing specific physico-chemical properties have also been developed to acquire a high-value textile market of the world. This book describes how these high-tech fibers have been developed and what aspects are the most important in each fiber based on its structure-property relationship. Famous specialists both in industry and academia are responsible for the contents, explaining the design concepts and the special technologies for the production of these special fibers. For university teachers and students, this volume is an excellent textbook that elucidates the basic concepts of modern fibers. At the same time, researchers, both in academia and industry, will find a comprehensive overview of recent man-made fibers. This publication, presenting the most easily understandable general survey of specialty man-made fibers to date, is dedicated to the 70th-anniversary of the Society of Fiber Science and Technology, Japan.

Download or read book 2D Materials written by Phaedon Avouris and published by Cambridge University Press. This book was released on 2017-06-29 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn about the most recent advances in 2D materials with this comprehensive and accessible text. Providing all the necessary materials science and physics background, leading experts discuss the fundamental properties of a wide range of 2D materials, and their potential applications in electronic, optoelectronic and photonic devices. Several important classes of materials are covered, from more established ones such as graphene, hexagonal boron nitride, and transition metal dichalcogenides, to new and emerging materials such as black phosphorus, silicene, and germanene. Readers will gain an in-depth understanding of the electronic structure and optical, thermal, mechanical, vibrational, spin and plasmonic properties of each material, as well as the different techniques that can be used for their synthesis. Presenting a unified perspective on 2D materials, this is an excellent resource for graduate students, researchers and practitioners working in nanotechnology, nanoelectronics, nanophotonics, condensed matter physics, and chemistry.

Download or read book Ceramic Nanocomposites written by Rajat Banerjee and published by Elsevier. This book was released on 2013-07-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ceramic nanocomposites have been found to have improved hardness, strength, toughness and creep resistance compared to conventional ceramic matrix composites. Ceramic nanocomposites reviews the structure and properties of these nanocomposites as well as manufacturing and applications.Part one looks at the properties of different ceramic nanocomposites, including thermal shock resistance, flame retardancy, magnetic and optical properties as well as failure mechanisms. Part two deals with the different types of ceramic nanocomposites, including the use of ceramic particles in metal matrix composites, carbon nanotube-reinforced glass-ceramic matrix composites, high temperature superconducting ceramic nanocomposites and ceramic particle nanofluids. Part three details the processing of nanocomposites, including the mechanochemical synthesis of metallic–ceramic composite powders, sintering of ultrafine and nanosized ceramic and metallic particles and the surface treatment of carbon nanotubes using plasma technology. Part four explores the applications of ceramic nanocomposites in such areas as energy production and the biomedical field.With its distinguished editors and international team of expert contributors, Ceramic nanocomposites is a technical guide for professionals requiring knowledge of ceramic nanocomposites, and will also offer a deeper understanding of the subject for researchers and engineers within any field dealing with these materials. - Reviews the structure and properties of ceramic nanocomposites as well as their manufacturing and applications - Examines properties of different ceramic nanocomposites, as well as failure mechanisms - Details the processing of nanocomposites and explores the applications of ceramic nanocomposites in areas such as energy production and the biomedical field