Download or read book Design Synthesis and Characterisation of Rigid Rod Conjugated Organometallic Polymers and Their Molecular Precursors written by Mohammed K. Al-Suti and published by . This book was released on 2005 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Synthesis and Characterization of Self assembling Conjugated Polymers for Use in Organic Electronic Applications written by Kathy Beckner Woody and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Conjugated polymers comprise some of the most promising materials for new technologies such as organic field effect transistors, solar light harvesting technology and sensing devices. In spite of tremendous research initiatives in materials chemistry, the potential to optimize device performance and develop new technologies is remarkable. Understanding relationships between the structure of conjugated polymers and their electronic properties is critical to improving device performance. The design and synthesis of new materials which self-organize into ordered nanostructures creates opportunities to establish relationships between electronic properties and morphology or molecular packing. This thesis details our progress in the development of synthetic routes which provide access to new classes of conjugated polymers that contain dissimilar side chains that segregate or dissimilar conjugated blocks which phase separate, and summarizes our initial attempts to characterize these materials. Poly(1,4-phenylene ethynylene)s (PPEs) have been used in a variety of organic electronic applications, most notably as fluorescent sensors. Using traditional synthetic methods, asymmetrically disubstituted PPEs have irregular placement of side chains on the conjugated backbone. Herein, we establish the first synthetic route to an asymmetrically substituted regioregular PPEs. The initial PPEs in this study have different lengths of alkoxy side chains, and both regioregular and regiorandom analogs are synthesized and characterized for comparison. The design of amphiphilic structures provides additional opportunities for side chains to influence the molecular packing and electronic properties of conjugated polymers. A new class of regioregular, amphiphilic PPEs has been prepared bearing alkoxy and semifluoroalkoxy side chains, which have a tendency to phase separate. Fully conjugated block copolymers can provide access to interesting new morphologies as a result of phase separation of the conjugated blocks. In particular, donor-acceptor block copolymers that phase separate into electron rich and electron poor domains may be advantageous in organic electronic devices such as bulk heterojunction solar cells, of which the performance relies on precise control of the interface between electron donating and accepting materials. The availability of donor-acceptor block copolymers is limited, largely due to the challenges associated with synthesizing these materials. In this thesis, two new synthetic routes to donor-acceptor block copolymers are established. These methods both utilize the catalyst transfer condensation polymerization, which proceeds by a chain growth mechanism. The first example entails the synthesis of a monofunctionalized, telechelic poly(3-alkylthiophene) which can be coupled to electron accepting polymers in a subsequent reaction. The other method describes the first example of a one-pot synthesis of a donor-acceptor diblock copolymer. The methods of synthesis are described, and characterization of the block copolymers is reported.
Download or read book Index to Theses with Abstracts Accepted for Higher Degrees by the Universities of Great Britain and Ireland and the Council for National Academic Awards written by and published by . This book was released on 2007 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design Synthesis and Characterization of Conjugated Polymers and Functional Paramagnetic Materials for Dynamic Nuclear Polarization written by Eric Lawrence Dane and published by . This book was released on 2010 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design, synthesis, and characterization of a series of radicals and biradicals for use as dynamic nuclear polarization (DNP) agents is described. DNP is a method to enhance the S/N-ratio in solid-state nuclear magnetic resonance (SS-NMR) that involves transferring the polarization of electrons, which are more easily polarized due to their larger magnetic moment, to nuclei. Two strategies to improve the performance of DNP-agents have been explored. The first involves combining a carbon-centered radical (1,3-bisdiphenylene-2-phenylallyl (BDPA) radical), which has a narrow line width at high field, with a nitroxide radical (2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical), which has a broader line width at high field. The synthesis and characterization of a BDPA-TEMPO biradical is described and is a first step in testing whether polarization agents of this type will out perform the currently used biradicals. Additionally, the synthesis of a water-soluble derivative of BDPA is described. The second strategy involves designing dinitroxide biradicals that rigidly hold the radicals in an orthogonal geometry. The synthesis of dinitroxide radicals of this type is described, along with efforts to optimize aqueous solubility. The design, synthesis, and characterization of thioether-containing poly(paraphenylene-ethynylene) (PPE) copolymers are reported. The polymers show a fluorescence turn-on response when exposed to oxidants in solution, and the oxidized polymers show desirable thin-film properties, such as high quantum yields and increased photostability. Work towards the synthesis of electroactive conjugated polymers based on the BDPA free radical is also reported.
Download or read book Organometallic Polymers written by Charles E. Jr. Carraher and published by Elsevier. This book was released on 2012-12-02 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organometallic Polymers focuses on the synthesis, characterization, and potential applications of organometallic polymers. The discussion is organized around seven themes: vinyl polymerization of organometallic monomers; condensation polymerization of organometallic monomers; polymer-bound catalysts; applications of organotin polymers; developments in organosilicon polymers; phosphonitrile and sulfur nitride polymers; and coordination polymers. This book is comprised of 33 chapters and begins with a general review of polymerized vinyl monomers containing transition metals, as well as the reactivity of such monomers in addition to homo- and copolymerizations. The following chapters explore the participation of the ferrocene nucleus in the polymerization of vinylferrocene and its effect on polymer properties; thermomechanical transitions of ferrocene-containing polymers; photocrosslinkable organometallic polyesters; and supported catalysts for ethylene polymerization. The remaining sections discuss antifouling applications of various tin-containing organometallic polymers; structure and applications of polyphosphazenes and polymeric sulfur nitride; and coordination of inorganic ions to polymers. This monograph will be a useful resource for organic chemists and research workers in the field.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book Design and Synthesis of Conjugated Polymers written by Mario Leclerc and published by John Wiley & Sons. This book was released on 2010-06-24 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first systematic compilation of synthesis methods for different classes of polymers describes well-tested and reproducible procedures, thus saving time, money and chemicals. Each chapter presents the latest method for a specific class of conjugated polymers with a particular emphasis on the design aspects for organo-electronic applications. In this concise and practically oriented manner, readers are introduced to the strategies of influencing and controlling the polymer properties with respect to their use in the desired device. This style of presentation quickly helps researchers in their daily lab work and prevents them from reinventing the wheel over and over again.
Download or read book Conjugated Polymers written by J.L. Brédas and published by Springer Science & Business Media. This book was released on 1991-09-30 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: CONJUGATED POLYMERS: THE IMTERPLAY BETWEEN SYNTHESIS, 1 STRUCTURE, AND PROPERTIES C. B. GORMAN and R. H. GRUBBS 1. Introduction 2 2. Structural Features of Conjuqated. Polyaers 3 3. Polymer Synthesis: Basic Methods 4 3. 1 Step-Growth Polymerization 5 3. 2 Chain-Growth Polymerization 6 3. 3 Rinq-Openinq Polymerization 8 4. Direct Synthetic Methods 8 4. 1 Electrochemical Synthesis 9 4. 2 Synthesis by Step-Growth Polymerization 11 4. 2. 1 Polyaniline (PAN) 11 4. 2. 2 Poly(Phenylene Sulfide) 12 4. 2. 3 Poly thiophene and its Derivatives 13 4. 2. 4 Other 5-membered Heterocyclic 16 Derivatives 4. 2. 5 Polyparaphenylene (PPP) 17 4. 2. 6 Polysilanes 18 4. 2. 7 Polymers of Phthalocyanines 19 4. 2. 8 Other Conjugated Metal Coordination 20 Polymers 4. 2. 9 Ladder Polymers 21 4. 3 The Unusual Topochemical Polymerization to 23 form Polydiacetylenes 4. 4 Chain-Growth Polymerizations 24 4. 4. 1 Polyacetylene via Ziegler-Natta 24 Polymerization 4. 4. 2 Ring-Opening Metathesis Polymerization 26 Routes to Polyacetylenes 5. Polymers fro. precursors 27 5. 1 Polyparaphenylene (PPP) 27 5. 2 Poly(Phenylene Vinylene) (PPV) and Other 28 Vinylene Polymers 5. 3 Precursors to Polyacetylene 29 6. Extentions of these Methods in the Synthesis of 31 .saall-Bandqap. Pplymers 7. Conjuqated. Polymer Matrices 33 8. Conclusions and Caveats 35 Acknowled. qements 36 References 36 vi TABLE OF CONTENTS PROPERTIES OF HIGHLY CONDUCTIHG POLYACETYLEHE 49 Th. SCHIMMEL, D. GLASER, M. SCHWOERER AND H. NAARMANN 1. Introduction 50 2. SBIlpie Synthesis, lIorphology and Properties 52 2."
Download or read book Government Reports Annual Index written by and published by . This book was released on 1994 with total page 1372 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymer Science and Engineering written by National Research Council and published by National Academies Press. This book was released on 1994-01-01 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymers are used in everything from nylon stockings to commercial aircraft to artificial heart valves, and they have a key role in addressing international competitiveness and other national issues. Polymer Science and Engineering explores the universe of polymers, describing their properties and wide-ranging potential, and presents the state of the science, with a hard look at downward trends in research support. Leading experts offer findings, recommendations, and research directions. Lively vignettes provide snapshots of polymers in everyday applications. The volume includes an overview of the use of polymers in such fields as medicine and biotechnology, information and communication, housing and construction, energy and transportation, national defense, and environmental protection. The committee looks at the various classes of polymersâ€"plastics, fibers, composites, and other materials, as well as polymers used as membranes and coatingsâ€"and how their composition and specific methods of processing result in unparalleled usefulness. The reader can also learn the science behind the technology, including efforts to model polymer synthesis after nature's methods, and breakthroughs in characterizing polymer properties needed for twenty-first-century applications. This informative volume will be important to chemists, engineers, materials scientists, researchers, industrialists, and policymakers interested in the role of polymers, as well as to science and engineering educators and students.
Download or read book Inorganic and Organometallic Polymers written by Vadapalli Chandrasekhar and published by Springer Science & Business Media. This book was released on 2005-01-18 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has its origins in courses taught by the author to various und- graduate and graduate students at the Indian Institute of Technology, K- pur, India. The diversity of inorganic chemistry and its impact on polymer chemistry has been profound. This subject matter has grown considerably in the last decade and the need to present it in a coherent manner to young minds is a pedagogic challenge. The aim of this book is to present to the students an introduction to the developments in Inorganic and - ganometallic polymers. This book is divided into eight chapters. Chapter 1 provides a general overview on the challenges of Inorganic polymer synthesis. This is f- lowed by a survey of organic polymers and also includes some basic f- tures of polymers. Chapters 3-8 deal with prominent families of inorganic and organometallic polymers. Although the target group of this book is the undergraduate and graduate students of chemistry, chemical engineering and materials science it is also hoped that chemists and related scientists in industry would find this book useful. I am extremely thankful to my wife Sudha who not only encouraged me throughout but also drew all the Figures and Schemes of this book. I also thank my children Adithya and Aarathi for their constant concern on the progress of this book. I express my acknowledgment to the editorial team of Springer-Verlag for their cooperation.
Download or read book High Performance Polymers and Engineering Plastics written by Vikas Mittal and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes advances in synthesis, processing, and technology of environmentally friendly polymers generated from renewable resources. With contents based on a wide range of functional monomers and contributions from eminent researchers, this volume demonstrates the design, synthesis, properties and applications of plant oil based polymers, presenting an elaborate review of acid mediated polymerization techniques for the generation of green polymers. Chemical engineers are provided with state-of-the-art information that acts to further progress research in this direction.
Download or read book Textbook of Polymer Science written by Fred W. Billmeyer and published by John Wiley & Sons. This book was released on 1984-03-21 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Third Edition of the classic, best-selling polymer science textbook surveys theory and practice of all major phases of polymer science, engineering, and technology, including polymerization, solution theory, fractionation and molecular-weight measurement, solid-state properties, structure-property relationships, and the preparation, fabrication and properties of commercially-important plastics, fibers, and elastomers.
Download or read book Polymers for Biomedical Applications written by Anil Mahapatro and published by American Chemical Society. This book was released on 2008-04-17 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research on applications of polymers for biomedical applications has increased dramatically to find improved medical plastics for this rapidly evolving field. This book brings together various aspects of recent research and developments within academia and industry related to polymers for biomedical applications.
Download or read book Functional Supramolecular Materials written by Rahul Banerjee and published by Royal Society of Chemistry. This book was released on 2017-05-05 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supramolecular materials have a great number of applications due to the reversibility of their non-covalent molecular interactions, such as reversible hydrogen bonding, host–guest interactions and electrostatic interactions. This book provides a comprehensive source of information on the structure and function of organic and metal–organic supramolecular materials. The chapters of this book provide an overview of supramolecular material assembly at various scales, including the formation of 2D polymers and molecular cages. The role of intermolecular interactions in solid and solution state self-assembly is discussed, as is the role of mechanochemistry on molecular and supramolecular architectures. Finally, novel applications of these materials in molecular recognition, catalysis, light harvesting and environmental remediation are covered. Functional Supramolecular Materials will be of interest to graduate students and researchers in academia and industry in the fields of supramolecular chemistry and functional materials science.
Download or read book Semiconducting Polymers written by Georges Hadziioannou and published by John Wiley & Sons. This book was released on 2006-12-15 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of semiconducting polymers has attracted many researchers from a diversity of disciplines. Printed circuitry, flexible electronics and displays are already migrating from laboratory successes to commercial applications, but even now fundamental knowledge is deficient concerning some of the basic phenomena that so markedly influence a device's usefulness and competitiveness. This two-volume handbook describes the various approaches to doped and undoped semiconducting polymers taken with the aim to provide vital understanding of how to control the properties of these fascinating organic materials. Prominent researchers from the fields of synthetic chemistry, physical chemistry, engineering, computational chemistry, theoretical physics, and applied physics cover all aspects from compounds to devices. Since the first edition was published in 2000, significant findings and successes have been achieved in the field, and especially handheld electronic gadgets have become billion-dollar markets that promise a fertile application ground for flexible, lighter and disposable alternatives to classic silicon circuitry. The second edition brings readers up-to-date on cutting edge research in this field.
Download or read book Direct Synthesis of Metal Complexes written by B.I. Kharisov and published by Elsevier. This book was released on 2018-04-19 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Synthesis of Metal Complexes provides in-depth coverage of the direct synthesis of coordination and organometallic compounds. The work is primarily organized by methods, but also covers highly relevant complexes, such as metal-polymer coordination compounds. This updated reference discusses recent developments in cryosynthesis, electrosynthesis, and tribosynthesis (popular as it doesn’t require organic solvents), with special attention paid to ‘greener’ methodologies and approaches. Additionally, the book describes physical methods of zero-valent metal interaction with organic matter, including sputtering, ultrasonic treatment and synthesis in ionic liquids. The book presents completely new content as a follow-up to the 1999 Elsevier Science publication Direct Synthesis of Coordination and Organometallic Compounds that was edited by Dr. Garnovskii and Dr. Kharisov. Covers current methods and techniques of metal interactions with organic media leading to metal chelates, adducts, di- and polymetallic complexes, metal-containing macrocycles, supported coordination compounds (i.e., metal complexes on carbon nanotubes), and more Describes reactivities of distinct forms of elemental metals (powders, sheets, nanoparticles (including a host of less-common metal nanostructures) with organic phase (liquid, solid and gaseous) and water Includes experimental procedures, with examples of direct synthesis, at the end of each chapter
