Download or read book Design Software Engineering and Implementation of an Embedded Telemetry System for a Solar Powered Racing Car written by Thorsten Jungmann and published by diplom.de. This book was released on 2003-04-25 with total page 95 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inhaltsangabe:Abstract: An embedded telemetry system has been designed and implemented into the solar-powered racing car Mad Dog 3 . The system shall assist strategists in making decisions during a solar car race. It delivers input data for a computer simulation model and for reconstruction of situations when failure occurred. System requirements have been analysed and the scope of solutions on the market has been explored. As a result, the choice of hardware and peripheral components has been made in favour of a microcomputer-based system. Strategy-relevant quantities in the solar car are measured by transducers and at the same time displayed on panel meters in the cockpit. Measured data are transmitted via a bus system to the central processing unit, which consists of the world s smallest PC. From the sensor signals the car s performance data is computed. As a result of computation, sets of performance data are sent to a laptop computer in one of the support vehicles by a pair of wireless modems. For safety reason, the system has been designed redundant. There is a digital device and a second analogue instrument for all key measurements. Communication equipment between the solar car driver and support staff has been reviewed and recommendations have been given. The project has been completed successfully, i.e. project aims have been reached. This was confirmed during a test drive. The range of the wireless modems has been proven satisfactory. CB radios have been shown not to be appropriate. There is a wide scope of additional investigation and supplementary features, due to the flexible nature of a microcomputer-based system. Inhaltsverzeichnis:Table of Contents: Acknowledgements Notationii 1.Introduction1 1.1Solar Energy3 1.2Solar Car Racing4 1.2.1ASC Race Regulations6 2.Project Work7 2.1Project Aims7 2.2Project management9 2.3Fund Raising11 2.4Research.12 2.4.1Telemetry12 2.4.2Previous Work15 2.4.3Types of Telemetry Systems17 2.4.4Embedded Systems.19 2.5Design21 2.5.1Requirements21 2.5.2Components24 2.5.3Software Engineering28 2.5.4Test and Debugging32 2.6Implementation33 2.7Maintenance34 2.8Communication35 3.Recommendations37 References38 Appendix39

Download or read book Popular Science written by and published by . This book was released on 2004-09 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: Popular Science gives our readers the information and tools to improve their technology and their world. The core belief that Popular Science and our readers share: The future is going to be better, and science and technology are the driving forces that will help make it better.

Download or read book The Winning Solar Car written by Douglad Carroll and published by SAE International. This book was released on 2003-10-17 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: A successful solar car team must have a good car, good drivers, good weather information, good strategy, and a well-trained support team. Based on the author's experiences designing and building five solar cars over a ten year period, this book focuses on the most imporant aspects of designing a competitive solar car, including developing a racing strategy, efficient solar car driving, project management, and designing the specific subsystems of the car. Chapters cover: Design Methodology Aerodynamics of Solar Cars Composite Materials Car Balance and Spring Rates and more

Download or read book Real Time Systems Design and Analysis written by Phillip A. Laplante and published by Wiley-IEEE Press. This book was released on 1997 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: "IEEE Press is pleased to bring you this Second Edition of Phillip A. Laplante's best-selling and widely-acclaimed practical guide to building real-time systems. This book is essential for improved system designs, faster computation, better insights, and ultimate cost savings. Unlike any other book in the field, REAL-TIME SYSTEMS DESIGN AND ANALYSIS provides a holistic, systems-based approach that is devised to help engineers write problem-solving software. Laplante's no-nonsense guide to real-time system design features practical coverage of: Related technologies and their histories Time-saving tips * Hands-on instructions Pascal code Insights into decreasing ramp-up times and more!"

Download or read book Execution Level Java Software and Hardware for the NPS Autonomous Underwater Vehicle written by Miguel A. Ayala and published by . This book was released on 2002-09-01 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous underwater vehicles (AUVs) have a great potential use for the United States Marine Corps and United States Navy. When performing amphibious operations, underwater mines present a danger for he forces going ashore. The use of underwater vehicles for the detection of this mines and signaling to the Amphibious Ready Group is very attractive. With advancements in hardware and object oriented language technology, more complicated and robust software can be developed. The Naval Postgraduate School Center for AUV Research has been designing, building, operating, and researching AUVs since 1987. Each generation of vehicles has provided substantially increased in operational capabilities and level of sophistication in the hardware and software respectively. With the advancement in real-time computer languages support, object oriented technology, and cost efficient and high performance hardware, this thesis lays the foundations to develop a software system for the execution level using the Java language. We look into the Java Real-Time specifications and extension to familiarize with the capabilities of Java for real-time support, and study Java boards and its application for embedded real-time systems. We developed an object-oriented design for the execution level control software and implemented the design in Java. A testing phase is still under work.

Download or read book The Design Development and Implementation of the Engine Control Module and Knock Detection for a Formula SAE Race Car written by Brian Alanson Janos and published by . This book was released on 2004 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Model Solar Car Racing written by Peter Harley and published by . This book was released on 1993 with total page 21 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Data Driven System Engineering written by James Wen and published by . This book was released on 2022-02-12 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Every computing system has two, and only two attributes: Data Value and Data timing, which represent fully the system functionalities from the system external behavior point of view.The data driven system engineering is the approach to develop the system by focusing on the two attributes mentioned above, in which, the data values are derived by the system operation concept design, and the data timing is derived by the system latency design. Based on which, this book provides a full range of system and software engineering development activities: Requirement Elicitation Requirement Engineering System and Software Architecture Design System Operation Concept Design System and Software Structure Design Electronic Architect Design Functionality Allocation Failure Mode and Effect Analysis (FMEA) Safety Cybersecurity System and software Verification System and Software Integration and Verification System and Software Black Box VerificationEach of which has its own clearly defined scope and approach, which is different from the conventional development, in some cases even different from some ISO standards, for example: about the safety development in this book, the safety requirements for every part in a vehicle are cascaded from the vehicle safety requirements, which is different from the Concept Phase in the Part 3 of ISO 26262; about the error prevention in this book, there are only two types of errors to be detected in a computing system: Data Value error and Data Timing error.

Download or read book Advanced Technologies for Solar Photovoltaics Energy Systems written by Saad Motahhir and published by Springer Nature. This book was released on 2021-04-26 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a detailed description, analysis, comparison of the latest research and developments in photovoltaic energy. Discussing everything from semiconductors to system integration, and applying various advanced technologies to stand alone and electric utility interfaced in normal and abnormal operating conditions of PV systems, this book provides a thorough introduction to the topic. This book brings together research from around the world, covering the use of technologies such as embedded systems, the Internet of things and blockchain technologies for PV systems for different applications including controllers, solar trackers and cooling systems. The book is of interest to electronic and mechanical engineers, researchers and students in the field of photovoltaics.

Download or read book IoT Fundamentals written by David Hanes and published by Cisco Press. This book was released on 2017-05-30 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, billions of devices are Internet-connected, IoT standards and protocols are stabilizing, and technical professionals must increasingly solve real problems with IoT technologies. Now, five leading Cisco IoT experts present the first comprehensive, practical reference for making IoT work. IoT Fundamentals brings together knowledge previously available only in white papers, standards documents, and other hard-to-find sources—or nowhere at all. The authors begin with a high-level overview of IoT and introduce key concepts needed to successfully design IoT solutions. Next, they walk through each key technology, protocol, and technical building block that combine into complete IoT solutions. Building on these essentials, they present several detailed use cases, including manufacturing, energy, utilities, smart+connected cities, transportation, mining, and public safety. Whatever your role or existing infrastructure, you’ll gain deep insight what IoT applications can do, and what it takes to deliver them. Fully covers the principles and components of next-generation wireless networks built with Cisco IOT solutions such as IEEE 802.11 (Wi-Fi), IEEE 802.15.4-2015 (Mesh), and LoRaWAN Brings together real-world tips, insights, and best practices for designing and implementing next-generation wireless networks Presents start-to-finish configuration examples for common deployment scenarios Reflects the extensive first-hand experience of Cisco experts

Download or read book Open Source Electronics Platforms written by Trung Dung Ngo and published by MDPI. This book was released on 2019-05-20 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Open-source electronics are becoming very popular, and are integrated with our daily educational and developmental activities. At present, the use open-source electronics for teaching science, technology, engineering, and mathematics (STEM) has become a global trend. Off-the-shelf embedded electronics such as Arduino- and Raspberry-compatible modules have been widely used for various applications, from do-it-yourself (DIY) to industrial projects. In addition to the growth of open-source software platforms, open-source electronics play an important role in narrowing the gap between prototyping and product development. Indeed, the technological and social impacts of open-source electronics in teaching, research, and innovation have been widely recognized.

Download or read book Uplink downlink written by Douglas J. Mudgway and published by . This book was released on 2001 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt: A description of what the Deep Space Network (DSN) is about, and how it works an aspect of NASA's planetary program. The origin and birth of the DSN, its subsequent development and expansion over four decades, and a description of the way in which the DSN was used to fulfill the purpose for which it was created. Technical references on the advanced telecommunications technology of the DSN. Describes the inner workings of the DSN and how they related to the more publicly visible events of the planetary space program.

Download or read book Converging Technologies for Improving Human Performance written by Mihail C. Roco and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: M. C. Roco and W.S. Bainbridge In the early decades of the 21st century, concentrated efforts can unify science based on the unity of nature, thereby advancing the combination of nanotechnology, biotechnology, information technology, and new technologies based in cognitive science. With proper attention to ethical issues and societal needs, converging in human abilities, societal technologies could achieve a tremendous improvement outcomes, the nation's productivity, and the quality of life. This is a broad, cross cutting, emerging and timely opportunity of interest to individuals, society and humanity in the long term. The phrase "convergent technologies" refers to the synergistic combination of four major "NBIC" (nano-bio-info-cogno) provinces of science and technology, each of which is currently progressing at a rapid rate: (a) nanoscience and nanotechnology; (b) biotechnology and biomedicine, including genetic engineering; (c) information technology, including advanced computing and communications; (d) cognitive science, including cognitive neuroscience. Timely and Broad Opportunity. Convergence of diverse technologies is based on material unity at the nanoscale and on technology integration from that scale.

Download or read book The Design and Engineering of Curiosity written by Emily Lakdawalla and published by Springer. This book was released on 2018-03-27 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the most complex machine ever sent to another planet: Curiosity. It is a one-ton robot with two brains, seventeen cameras, six wheels, nuclear power, and a laser beam on its head. No one human understands how all of its systems and instruments work. This essential reference to the Curiosity mission explains the engineering behind every system on the rover, from its rocket-powered jetpack to its radioisotope thermoelectric generator to its fiendishly complex sample handling system. Its lavishly illustrated text explains how all the instruments work -- its cameras, spectrometers, sample-cooking oven, and weather station -- and describes the instruments' abilities and limitations. It tells you how the systems have functioned on Mars, and how scientists and engineers have worked around problems developed on a faraway planet: holey wheels and broken focus lasers. And it explains the grueling mission operations schedule that keeps the rover working day in and day out.

Download or read book Interconnecting Smart Objects with IP written by Jean-Philippe Vasseur and published by Morgan Kaufmann. This book was released on 2010-07-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interconnecting Smart Objects with IP: The Next Internet explains why the Internet Protocol (IP) has become the protocol of choice for smart object networks. IP has successfully demonstrated the ability to interconnect billions of digital systems on the global Internet and in private IP networks. Once smart objects can be easily interconnected, a whole new class of smart object systems can begin to evolve. The book discusses how IP-based smart object networks are being designed and deployed. The book is organized into three parts. Part 1 demonstrates why the IP architecture is well suited to smart object networks, in contrast to non-IP based sensor network or other proprietary systems that interconnect to IP networks (e.g. the public Internet of private IP networks) via hard-to-manage and expensive multi-protocol translation gateways that scale poorly. Part 2 examines protocols and algorithms, including smart objects and the low power link layers technologies used in these networks. Part 3 describes the following smart object network applications: smart grid, industrial automation, smart cities and urban networks, home automation, building automation, structural health monitoring, and container tracking. Shows in detail how connecting smart objects impacts our lives with practical implementation examples and case studies Provides an in depth understanding of the technological and architectural aspects underlying smart objects technology Offers an in-depth examination of relevant IP protocols to build large scale smart object networks in support of a myriad of new services

Download or read book Aerospace Environment written by John C. Evvard and published by . This book was released on 1968 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Storage Systems and Power Conversion Electronics for E Transportation and Smart Grid written by Sergio Saponara and published by MDPI. This book was released on 2020-12-02 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a reprint in book form of the Energies MDPI Journal Special Issue , entitled “Energy Storage Systems and Power Conversion Electronics for E-Transportation and Smart Grid”. The Special Issue was managed by two Guest Editors from Italy and Norway: Professor Sergio Saponara from the University of Pisa and Professor Lucian MIHET-POPA from Østfold University College, in close cooperation with the Editors from Energies. The papers published in this SI are related to the emerging trends in energy storage and power conversion electronic circuits and systems, with a specific focus on transportation electrification, and on the evolution from the electric grid to a smart grid. An extensive exploitation of renewable energy sources is foreseen for the smart grid, as well as a close integration with the energy storage and recharging systems of the electrified transportation era. Innovations at the levels of both algorithmic and hardware (i.e., power converters, electric drives, electronic control units (ECU), energy storage modules and charging stations) are proposed. Research and technology transfer activities in energy storage systems, such as batteries and super/ultra-capacitors, are essential for the success of electric transportation, and to foster the use of renewable energy sources. Energy storage systems are the key technology to solve these issues, and to increase the adoption of renewable energy sources in the smart grid.