Download or read book Design Simulation and Development of Advanced Gallium Nitride Based High Electron Mobility Transistors for Power Electronic Applications written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Development of GaN based Vertical Transistors for Increased Power Density in Power Electronics Applications written by Dong Ji and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Gallium nitride (GaN)-based devices have entered the power electronics market and shown excellent progress in the medium power conversion applications. For power conversions applications > 10 kW, devices with vertical geometry are preferred over lateral geometry, since the former allows more current for a given chip area, thus provides a more economical solution for high-voltage and high-current applications. Moreover, the vertical geometry is attractive for its dispersion-free performance without passivation, a phenomenon that causes high dynamic on-state resistance (R[subscript on]) in lateral geometry high electron mobility transistors (HEMTs). In this study, GaN-based vertical transistors, which include trench current aperture vertical electron transistors (CAVETs) and in-situ oxide, GaN interlayer based trench field-effect transistors (OGFETs), have been studied both theoretically and experimentally. In order to model the devices for DC and switching performances, a device/circuit hybrid simulation platform was developed based on Silvaco ATLAS. The validation of the model was obtained by calibrating it against commercially available HEMT data. Using this hybrid model, one can start with a two-dimensional (2D) drift-diffusion model of the device and build all the way up to its circuit implementation to evaluate its switching performance. The hybrid model offers an inexpensive and accurate way to project and benchmark the performance and can be extended to any GaN-based power transistors.In the experimental portion of this study, a high voltage OGFET was designed and fabricated. An OGFET shows improved characteristics owing to a 10 nm unintentionally doped (UID) GaN interlayer as the channel. A normally-off (V[subscript th] = 4 V) vertical GaN OGFET with 10 nm UID-GaN channel interlayer and 50 nm in-situ Al2O3 was successfully demonstrated and scaled for higher current operation. By using a novel double-field-plated structure for mitigating peak electric field, a higher off-state breakdown voltage over 1.4 kV was achieved with a significantly low specific on-state resistance (R[subscript on,sp]) of 2.2 m[omega] cm2. The metal-organic chemical vapor deposition (MOCVD) regrown 10 nm GaN channel interlayer enabled a channel resistance lower than 10 [omega] mm with an average channel electron mobility of 185 cm2/Vs. The fabricated large area transistor with a total area of 0.4 mm × 0.5 mm offered a breakdown voltage of 900 V and an Ron of 4.1 [omega]. Results indicate the potential of vertical GaN OGFET for greater than 1 kV range of power electronics applications.In addition to the OGFET, the CAVET with a trench gate structure was studied in this work. By taking advantage of the two-dimensional electron gas (2DEG) in the AlGaN/GaN structure, the trench CAVET can secure an even higher channel electron mobility compared to the OGFET. The first functional trench CAVET with a metal-insulator-semiconductor (MIS) gate structure was fabricated in this work with a breakdown voltage of about 225 V. With the improvement in the fabrication process, an 880 V device with an R[subscript on,sp] of 2.7 m[omega] cm2 was demonstrated. One of the notable features of the fabricated trench CAVET is that it requires a standard MOCVD growth condition for HEMT epilayers. The simplification of the growth process is a significant achievement. Finally, a regrowth-free CAVET was demonstrated and patented. The transformative approach was realized using Si ion implantation based doping compensation in the aperture.
Download or read book Gallium Nitride Power Devices written by Hongyu Yu and published by CRC Press. This book was released on 2017-07-06 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: GaN is considered the most promising material candidate in next-generation power device applications, owing to its unique material properties, for example, bandgap, high breakdown field, and high electron mobility. Therefore, GaN power device technologies are listed as the top priority to be developed in many countries, including the United States, the European Union, Japan, and China. This book presents a comprehensive overview of GaN power device technologies, for example, material growth, property analysis, device structure design, fabrication process, reliability, failure analysis, and packaging. It provides useful information to both students and researchers in academic and related industries working on GaN power devices. GaN wafer growth technology is from Enkris Semiconductor, currently one of the leading players in commercial GaN wafers. Chapters 3 and 7, on the GaN transistor fabrication process and GaN vertical power devices, are edited by Dr. Zhihong Liu, who has been working on GaN devices for more than ten years. Chapters 2 and 5, on the characteristics of polarization effects and the original demonstration of AlGaN/GaN heterojunction field-effect transistors, are written by researchers from Southwest Jiaotong University. Chapters 6, 8, and 9, on surface passivation, reliability, and package technologies, are edited by a group of researchers from the Southern University of Science and Technology of China.
Download or read book GaN Transistors for Efficient Power Conversion written by Alex Lidow and published by John Wiley & Sons. This book was released on 2014-09-15 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gallium nitride (GaN) is an emerging technology that promises to displace silicon MOSFETs in the next generation of power transistors. As silicon approaches its performance limits, GaN devices offer superior conductivity and switching characteristics, allowing designers to greatly reduce system power losses, size, weight, and cost. This timely second edition has been substantially expanded to keep students and practicing power conversion engineers ahead of the learning curve in GaN technology advancements. Acknowledging that GaN transistors are not one-to-one replacements for the current MOSFET technology, this book serves as a practical guide for understanding basic GaN transistor construction, characteristics, and applications. Included are discussions on the fundamental physics of these power semiconductors, layout and other circuit design considerations, as well as specific application examples demonstrating design techniques when employing GaN devices. With higher-frequency switching capabilities, GaN devices offer the chance to increase efficiency in existing applications such as DC–DC conversion, while opening possibilities for new applications including wireless power transfer and envelope tracking. This book is an essential learning tool and reference guide to enable power conversion engineers to design energy-efficient, smaller and more cost-effective products using GaN transistors. Key features: Written by leaders in the power semiconductor field and industry pioneers in GaN power transistor technology and applications. Contains useful discussions on device–circuit interactions, which are highly valuable since the new and high performance GaN power transistors require thoughtfully designed drive/control circuits in order to fully achieve their performance potential. Features practical guidance on formulating specific circuit designs when constructing power conversion systems using GaN transistors – see companion website for further details. A valuable learning resource for professional engineers and systems designers needing to fully understand new devices as well as electrical engineering students.
Download or read book Nitride Semiconductor Technology written by Fabrizio Roccaforte and published by John Wiley & Sons. This book was released on 2020-07-17 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book "Nitride Semiconductor Technology" provides an overview of nitride semiconductors and their uses in optoelectronics and power electronics devices. It explains the physical properties of those materials as well as their growth methods. Their applications in high electron mobility transistors, vertical power devices, LEDs, laser diodes, and vertical-cavity surface-emitting lasers are discussed in detail. The book further examines reliability issues in these materials and puts forward perspectives of integrating them with 2D materials for novel high-frequency and high-power devices. In summary, it covers nitride semiconductor technology from materials to devices and provides the basis for further research.
Download or read book Gallium Nitride GaN written by Farid Medjdoub and published by CRC Press. This book was released on 2017-12-19 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses a Growing Need for High-Power and High-Frequency Transistors Gallium Nitride (GaN): Physics, Devices, and Technology offers a balanced perspective on the state of the art in gallium nitride technology. A semiconductor commonly used in bright light-emitting diodes, GaN can serve as a great alternative to existing devices used in microelectronics. It has a wide band gap and high electron mobility that gives it special properties for applications in optoelectronic, high-power, and high-frequency devices, and because of its high off-state breakdown strength combined with excellent on-state channel conductivity, GaN is an ideal candidate for switching power transistors. Explores Recent Progress in High-Frequency GaN Technology Written by a panel of academic and industry experts from around the globe, this book reviews the advantages of GaN-based material systems suitable for high-frequency, high-power applications. It provides an overview of the semiconductor environment, outlines the fundamental device physics of GaN, and describes GaN materials and device structures that are needed for the next stage of microelectronics and optoelectronics. The book details the development of radio frequency (RF) semiconductor devices and circuits, considers the current challenges that the industry now faces, and examines future trends. In addition, the authors: Propose a design in which multiple LED stacks can be connected in a series using interband tunnel junction (TJ) interconnects Examine GaN technology while in its early stages of high-volume deployment in commercial and military products Consider the potential use of both sunlight and hydrogen as promising and prominent energy sources for this technology Introduce two unique methods, PEC oxidation and vapor cooling condensation methods, for the deposition of high-quality oxide layers A single-source reference for students and professionals, Gallium Nitride (GaN): Physics, Devices, and Technology provides an overall assessment of the semiconductor environment, discusses the potential use of GaN-based technology for RF semiconductor devices, and highlights the current and emerging applications of GaN.
Download or read book Gallium Nitride enabled High Frequency and High Efficiency Power Conversion written by Gaudenzio Meneghesso and published by Springer. This book was released on 2018-05-12 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book demonstrates to readers why Gallium Nitride (GaN) transistors have a superior performance as compared to the already mature Silicon technology. The new GaN-based transistors here described enable both high frequency and high efficiency power conversion, leading to smaller and more efficient power systems. Coverage includes i) GaN substrates and device physics; ii) innovative GaN -transistors structure (lateral and vertical); iii) reliability and robustness of GaN-power transistors; iv) impact of parasitic on GaN based power conversion, v) new power converter architectures and vi) GaN in switched mode power conversion. Provides single-source reference to Gallium Nitride (GaN)-based technologies, from the material level to circuit level, both for power conversions architectures and switched mode power amplifiers; Demonstrates how GaN is a superior technology for switching devices, enabling both high frequency, high efficiency and lower cost power conversion; Enables design of smaller, cheaper and more efficient power supplies.
Download or read book Physics Based Virtual Source Compact Model of Gallium nitride High Electron Mobility Transistors written by Hao Zhang and published by . This book was released on 2017 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gallium Nitride (GaN) based high electron mobility transistors (HEMTs) outperform Gallium Arsenide (GaAs) and silicon based transistors for radio frequency (RF) applications in terms of output power and efficiency due to its large bandgap (~3.4 eV@300 K) and high carrier mobility property (1500 - 2300 cm^2/(V-s)). These advantages have made GaN technology a promising candidate for future high-power microwave and potential millimeter-wave applications. Current GaN HEMT models used by the industry, such as Angelov Model, EEHEMT Model and DynaFET (Dynamic FET) model, are empirical or semi-empirical. Lacking the physical description of the device operations, these empirical models are not directly scalable. Circuit design that uses the models requires multiple iterations between the device and circuit levels, becoming a lengthy and expensive process. Conversely existing physics based models, such as surface potential model, are computationally intensive and thus impractical for full scale circuit simulation and optimization. To enable efficient GaN-based RF circuit design, computationally efficient physics based compact models are required. In this thesis, a physics based Virtual Source (VS) compact model is developed for GaN HEMTs targeting RF applications. While the intrinsic current and charge model are developed based on the Virtual Source model originally proposed by MIT researchers, the gate current model and parasitic element network are proposed based on our applications with a new efficient parameter extraction flow. Both direct current (DC) of drain and gate currents and RF measurements are conducted for model parameter extractions. The new flow first extracts device parasitic resistive values based on the DC measurement of gate current. Then parameters related with the intrinsic region are determined based on the transport characteristics in the subthreshold and above threshold regimes. Finally, the parasitic resistance, capacitance and inductance values are optimized based on the S-parameter measurement. This new extraction flow provides reliable and accurate extraction for parasitic element values while achieving reasonable resolutions holistically with both DC and RF characteristics. The model is validated against measurement data in terms of drain current, gate current and scattering parameter (S-parameter). This model provides simple yet clear physical description for GaN HEMTs with only a short list of model parameters compared with other empirical or physics based models. It can be easily integrated in circuit simulators for RF circuit design.
Download or read book Gallium Nitride Electronics written by Rüdiger Quay and published by Springer Science & Business Media. This book was released on 2008-04-05 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on nearly a decade of materials and electronics research at the leading research institution on the nitride topic in Europe. It is a comprehensive monograph and tutorial that will be of interest to graduate students of electrical engineering, communication engineering, and physics; to materials, device, and circuit engineers in research and industry; to all scientists with a general interest in advanced electronics.
Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.
Download or read book Nitride Semiconductor Devices written by Joachim Piprek and published by John Wiley & Sons. This book was released on 2007-06-27 with total page 519 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to be published on physical principles, mathematical models, and practical simulation of GaN-based devices. Gallium nitride and its related compounds enable the fabrication of highly efficient light-emitting diodes and lasers for a broad spectrum of wavelengths, ranging from red through yellow and green to blue and ultraviolet. Since the breakthrough demonstration of blue laser diodes by Shuji Nakamura in 1995, this field has experienced tremendous growth worldwide. Various applications can be seen in our everyday life, from green traffic lights to full-color outdoor displays to high-definition DVD players. In recent years, nitride device modeling and simulation has gained importance and advanced software tools are emerging. Similar developments occurred in the past with other semiconductors such as silicon, where computer simulation is now an integral part of device development and fabrication. This book presents a review of modern device concepts and models, written by leading researchers in the field. It is intended for scientists and device engineers who are interested in employing computer simulation for nitride device design and analysis.
Download or read book Modeling Gallium nitride Based High Electron Mobility Transistors written by Ujwal Radhakrishna and published by . This book was released on 2016 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gallium-Nitride-based high electron mobility transistor (HEMTs) technology is increasingly finding space in high voltage (HV) and high frequency (HF) circuit application domains. The superior breakdown electric field, high electron mobility, and high temperature performance of GaN HEMTs are the key factors for its use as HV switches in converters and active components of RF-power amplifiers. Designing circuits in both application regimes requires accurate compact device models that are grounded in physics and can describe the non-linear terminal characteristics. Currently available compact models for HEMTs are empirical and hence are lacking in physical description of the device, which becomes a handicap in understanding key device-circuit interactions and in accurate estimation of device behavior in circuits. This thesis seeks to develop a physics-based compact model for GaN HEMTs from first principles which can be used as a design tool for technology optimization to identify device-performance bottlenecks on one hand and as a tool for circuit design to investigate the impact of behavioral nuances of the device on circuit performance, on the other. Part of this thesis consists of demonstrations of the capabilities of the model to accurately predict device characteristics such as terminal DC- and pulsed-currents, charges, small-signal S-parameters, large-signal switching characteristics, load-pull, source-pull and power-sweep, inter-modulation-distortion and noise-figure of both HV- and RF-devices. The thesis also aims to tie device-physics concepts of carrier transport and charge distribution in GaN HEMTs to circuit-design through circuit-level evaluation. In the HV-application regime benchmarking is conducted against switching characteristics of a GaN DC-DC converter to understand the impact of device capacitances, field plates, temperature and charge-trapping on switching slew rates. In the RF-application regime validation is done against the large-signal characteristics of GaN-power amplifiers to study the output-power, efficiency and compression characteristics as function of class-of-operation. Noise-figure of low-noise amplifiers is tested to estimate the contributions of device-level noise sources, and validation against switching frequency and phase-noise characteristics of voltage-controlled oscillators is done to evaluate the noise performance of GaN HEMT technology. Evaluation of model-accuracy in determining the conversion-efficiency of RF-converters and linearity metrics of saturated non-linear amplifiers is carried out. The key contribution of this work is to provide a tool in the form of a physics-based compact model to device-technology-engineers and circuit-designers, who can use it to evaluate the potential strengths and weaknesses of the emerging GaN technology.
Download or read book Thermal Management of Gallium Nitride Electronics written by Marko Tadjer and published by Woodhead Publishing. This book was released on 2022-07-13 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermal Management of Gallium Nitride Electronics outlines the technical approaches undertaken by leaders in the community, the challenges they have faced, and the resulting advances in the field. This book serves as a one-stop reference for compound semiconductor device researchers tasked with solving this engineering challenge for future material systems based on ultra-wide bandgap semiconductors. A number of perspectives are included, such as the growth methods of nanocrystalline diamond, the materials integration of polycrystalline diamond through wafer bonding, and the new physics of thermal transport across heterogeneous interfaces. Over the past 10 years, the book's authors have performed pioneering experiments in the integration of nanocrystalline diamond capping layers into the fabrication process of compound semiconductor devices. Significant research efforts of integrating diamond and GaN have been reported by a number of groups since then, thus resulting in active thermal management options that do not necessarily lead to performance derating to avoid self-heating during radio frequency or power switching operation of these devices. Self-heating refers to the increased channel temperature caused by increased energy transfer from electrons to the lattice at high power. This book chronicles those breakthroughs. Includes the fundamentals of thermal management of wide-bandgap semiconductors, with historical context, a review of common heating issues, thermal transport physics, and characterization methods Reviews the latest strategies to overcome heating issues through materials modeling, growth and device design strategies Touches on emerging, real-world applications for thermal management strategies in power electronics
Download or read book Design space and Scalable Technology for GaN Based Power Transistors written by Daniel Piedra (Ph. D.) and published by . This book was released on 2018 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: As silicon devices approach their intrinsic material and technological limit, there is an opportunity for alternative semiconductor materials to push the performance of electronics forward. Gallium nitride (GaN) has demonstrated very promising performance for advanced electronics, but there is still room for improvement. This thesis discusses several new transistor designs to improve the performance of GaN-based power devices as well as demonstrations of their scaling potential and integration capability with silicon. Specifically, we have developed a wide-periphery GaN fin-based high electron mobility transistor process for power switching. The process was developed with emphasis on the passivation, field plates, gate periphery scaling, and packaging. A CMOS compatible GaN processing technology on 200-mm wafers was developed and optimized, with particular attention focused on the recess etching through the wide-bandgap AlGaN barrier to reduce the contact resistance. A study of a heterogeneous integration technology to integrate GaN and Si devices was conducted. This involved an approach to monolithically integrate GaN and Si devices which used a bonded SOI wafer with a Si (111) substrate and Si (100) device layer with windows opened to access the (111) layer to selectively grow GaN. Characterization of the transistor properties in GaN windows of different sizes was performed to qualify the optimal window size for power devices in future integrated systems.
Download or read book A Compact Transport and Charge Model for GaN based High Electron Mobility Transistors for RF Applications written by Ujwal Radhakrishna and published by . This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gallium Nitride (GaN)-based high electron mobility transistors (HEMTs) are rapidly emerging as front-runners in high-power mm-wave circuit applications. For circuit design with current devices and to allow sensible future performance projections from device engineering in such a rapidly evolving technology, compact device models are essential. In this thesis, a physics-based compact model is developed for short channel GaN HEMTs. The model is based on the concept of virtual source (VS) transport originally developed for scaled silicon field effect transistors. Self-consistent current and charge expressions in the model require very few parameters. The parameters have straightforward physical meanings and can be extracted through independent measurements. The model is implemented in Verilog-A and is compatible with state of the art circuit simulators. The new model is calibrated and validated with experimental DC I-V and S-parameter measurements of fabricated devices. Using the model, a projection of cut-off frequency (f-[tau]) of GaN-based HEMTs with scaling is performed to highlight performance bottlenecks.
Download or read book Modeling of AlGaN GaN High Electron Mobility Transistors written by D. Nirmal and published by Springer. This book was released on 2025-02-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume focuses on GaN HEMT, the most promising transistor technology for RF power applications such as 5G communications, space and defense. The contents include accurate small signal models required to predict the RF power performance of RF electronic circuits, large signal modeling of GaN HEMTs, accurate and compact physical models to assist the RF circuit designers to optimize GaN HEMT-based power amplifiers and integrated circuits, among others. The book also covers thermal resistance modeling of GaN HEMTs, charge-based compact models, and surface potential-based models to study the impact of gate leakage current on the RF power performance of GaN HEMTs. This book also deals with the analytical modeling of intrinsic charges and surface potential of GaN HEMTs, physical modeling of charge trapping, neural network-based GaN HEMT models, numerical-based GaN HEMT models, modeling of short channel effects in GaN HEMTs, modeling of parasitic capacitances and resistances, modelingof current collapse and kink effects in HGaN HEMTs, etc. This volume will be a useful to those in industry and academia.
Download or read book High Mobility and Quantum Well Transistors written by Geert Hellings and published by Springer Science & Business Media. This book was released on 2013-03-25 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: For many decades, the semiconductor industry has miniaturized transistors, delivering increased computing power to consumers at decreased cost. However, mere transistor downsizing does no longer provide the same improvements. One interesting option to further improve transistor characteristics is to use high mobility materials such as germanium and III-V materials. However, transistors have to be redesigned in order to fully benefit from these alternative materials. High Mobility and Quantum Well Transistors: Design and TCAD Simulation investigates planar bulk Germanium pFET technology in chapters 2-4, focusing on both the fabrication of such a technology and on the process and electrical TCAD simulation. Furthermore, this book shows that Quantum Well based transistors can leverage the benefits of these alternative materials, since they confine the charge carriers to the high-mobility material using a heterostructure. The design and fabrication of one particular transistor structure - the SiGe Implant-Free Quantum Well pFET – is discussed. Electrical testing shows remarkable short-channel performance and prototypes are found to be competitive with a state-of-the-art planar strained-silicon technology. High mobility channels, providing high drive current, and heterostructure confinement, providing good short-channel control, make a promising combination for future technology nodes.
