Download or read book Design Principles and Methods for Aircraft Gas Turbine Engines Les Principes Et Methodes de Conception Des Turbomoteurs written by Nato research and technology organization neuilly-sur-seine (France) and published by . This book was released on 1999 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposium dealt with design approaches for military aircraft propulsion systems to provide enhanced operational flexibility, longer range, better fuel efficiency and improved affordability. All classes of gas turbines were addressed in nine sessions as follows: Engine Design and Analysis (Part 1) (5 papers); Mechanical Systems (6 papers); Controls (4 papers); Combustors/Augmentors (4 papers); Compressor Systems (Part I) (5 papers); Compressor Systems (Part II) (3 papers); Turbines (Part I) (5 papers); Turbines (Part II) (4 papers); Engine Design and Analysis (Part II) (4 papers) These proceedings also include a Technical Evaluation Report and a Keynote address published in French and English.
Download or read book Design Principles and Methods for Aircraft Gas Turbine Engines written by and published by . This book was released on 1999 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The symposium dealt with design approaches for military aircraft propulsion systems to provide enhanced operational flexibility, longer range, better fuel efficiency and improved affordability. All classes of gas turbines were addressed in nine sessions as follows: Engine Design and Analysis (Part 1) (5 papers); Mechanical Systems (6 papers); Controls (4 papers); Combustors/Augmentors (4 papers); Compressor Systems (Part I) (5 papers); Compressor Systems (Part II) (3 papers); Turbines (Part I) (5 papers); Turbines (Part II) (4 papers); Engine Design and Analysis (Part II) (4 papers) These proceedings also include a Technical Evaluation Report and a Keynote address published in French and English.
Download or read book Aircraft Engine Design written by Jack D. Mattingly and published by AIAA. This book was released on 2002 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation A design textbook attempting to bridge the gap between traditional academic textbooks, which emphasize individual concepts and principles; and design handbooks, which provide collections of known solutions. The airbreathing gas turbine engine is the example used to teach principles and methods. The first edition appeared in 1987. The disk contains supplemental material. Annotation c. Book News, Inc., Portland, OR (booknews.com).
Download or read book Design Principles and Methods for Aircraft Gas Turbine Engines written by J. W. Chew and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Axial Turbine Aerodynamics for Aero engines written by Zhengping Zou and published by Springer. This book was released on 2018-01-11 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a monograph on aerodynamics of aero-engine gas turbines focusing on the new progresses on flow mechanism and design methods in the recent 20 years. Starting with basic principles in aerodynamics and thermodynamics, this book systematically expounds the recent research on mechanisms of flows in axial gas turbines, including high pressure and low pressure turbines, inter-turbine ducts and turbine rear frame ducts, and introduces the classical and innovative numerical evaluation methods in different dimensions. This book also summarizes the latest research achievements in the field of gas turbine aerodynamic design and flow control, and the multidisciplinary conjugate problems involved with gas turbines. This book should be helpful for scientific and technical staffs, college teachers, graduate students, and senior college students, who are involved in research and design of gas turbines.
Download or read book Aircraft Propulsion and Gas Turbine Engines written by Ahmed F. El-Sayed and published by CRC Press. This book was released on 2008-02-27 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: The escalating use of aircraft in the 21st century demands a thorough understanding of engine propulsion concepts, including the performance of aero engines. Among other critical activities,gas turbines play an extensive role in electric power generation, and marine propulsion for naval vessels and cargo ships. In the most exhaustive volume to date, this text examines the foundation of aircraft propulsion: aerodynamics interwoven with thermodynamics, heat transfer, and mechanical design. With a finely focused approach, the author devotes each chapter to a particular engine type, such as ramjet and pulsejet, turbojet, and turbofan. Supported by actual case studies, he illustrates engine performance under various operating conditions. Part I discusses the history, classifications, and performance of air breathing engines. Beginning with Leonardo and continuing on to the emergence of the jet age and beyond, this section chronicles inventions up through the 20th century. It then moves into a detailed discussion of different engine types, including pulsejet, ramjet, single- and multi-spool turbojet, and turbofan in both subsonic and supersonic applications. The author discusses Vertical Take Off and Landing aircraft, and provides a comprehensive examination of hypersonic scramjet and turbo ramjet engines. He also analyzes the different types of industrial gas turbines having single-and multi-spool with intercoolers, regenerators, and reheaters. Part II investigates the design of rotating compressors and turbines, and non-rotating components, intakes, combustion chambers, and nozzles for all modern jet propulsion and gas turbine engine systems, along with their performance. Every chapter concludes with illustrative examples followed by a problems section; for greater clarity, some provide a listing of important mathematical relations.
Download or read book Gas Turbine Design Components and System Design Integration written by Meinhard T. Schobeiri and published by Springer. This book was released on 2017-06-06 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book written by a world-renowned expert with more than forty years of active gas turbine R&D experience comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation.This new book provides practicing gas turbine designers and young engineers working in the industry with design material that the manufacturers would keep proprietary. The book is also intended to provide instructors of turbomachinery courses around the world with a powerful tool to assign gas turbine components as project and individual modules that are integrated into a complete system. Quoting many statements by the gas turbine industry professionals, the young engineers graduated from the turbomachinery courses offered by the author, had the competency of engineers equivalent to three to four years of industrial experience.
Download or read book Gas Turbine Design Components and System Design Integration written by Meinhard T. Schobeiri and published by Springer Nature. This book was released on 2019-11-25 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second revised and enhanced edition of the book Gas Turbine Design, Components and System Integration written by a world-renowned expert with more than forty years of active gas turbine R&D experience. It comprehensively treats the design of gas turbine components and their integration into a complete system. Unlike many currently available gas turbine handbooks that provide the reader with an overview without in-depth treatment of the subject, the current book is concentrated on a detailed aero-thermodynamics, design and off-deign performance aspects of individual components as well as the system integration and its dynamic operation. This new book provides practicing gas turbine designers and young engineers working in the industry with design material that the manufacturers would keep proprietary. The book is also intended to provide instructors of turbomachinery courses around the world with a powerful tool to assign gas turbine components as project and individual modules that are integrated into a complete system. Quoting many statements by the gas turbine industry professionals, the young engineers graduated from the turbomachinery courses offered by the author, had the competency of engineers equivalent to three to four years of industrial experience.
Download or read book Aircraft Engines and Gas Turbines second edition written by Jack L. Kerrebrock and published by MIT Press. This book was released on 1992-04-22 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aircraft Engines and Gas Turbines is widely used as a text in the United States and abroad, and has also become a standard reference for professionals in the aircraft engine industry. Unique in treating the engine as a complete system at increasing levels of sophistication, it covers all types of modern aircraft engines, including turbojets, turbofans, and turboprops, and also discusses hypersonic propulsion systems of the future. Performance is described in terms of the fluid dynamic and thermodynamic limits on the behavior of the principal components: inlets, compressors, combustors, turbines, and nozzles. Environmental factors such as atmospheric pollution and noise are treated along with performance. This new edition has been substantially revised to include more complete and up-to-date coverage of compressors, turbines, and combustion systems, and to introduce current research directions. The discussion of high-bypass turbofans has been expanded in keeping with their great commercial importance. Propulsion for civil supersonic transports is taken up in the current context. The chapter on hypersonic air breathing engines has been expanded to reflect interest in the use of scramjets to power the National Aerospace Plane. The discussion of exhaust emissions and noise and associated regulatory structures have been updated and there are many corrections and clarifications.
Download or read book Design Principles and Methods for Aircaft Gas Turbine Engines written by and published by . This book was released on 1999 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Design of High Efficiency Turbomachinery and Gas Turbines second edition with a new preface written by David Gordon Wilson and published by MIT Press. This book was released on 2014-09-12 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of a comprehensive textbook that introduces turbomachinery and gas turbines through design methods and examples. This comprehensive textbook is unique in its design-focused approach to turbomachinery and gas turbines. It offers students and practicing engineers methods for configuring these machines to perform with the highest possible efficiency. Examples and problems are based on the actual design of turbomachinery and turbines. After an introductory chapter that outlines the goals of the book and provides definitions of terms and parts, the book offers a brief review of the basic principles of thermodynamics and efficiency definitions. The rest of the book is devoted to the analysis and design of real turbomachinery configurations and gas turbines, based on a consistent application of thermodynamic theory and a more empirical treatment of fluid dynamics that relies on the extensive use of design charts. Topics include turbine power cycles, diffusion and diffusers, the analysis and design of three-dimensional free-stream flow, and combustion systems and combustion calculations. The second edition updates every chapter, adding material on subjects that include flow correlations, energy transfer in turbomachines, and three-dimensional design. A solutions manual is available for instructors. This new MIT Press edition makes a popular text available again, with corrections and some updates, to a wide audience of students, professors, and professionals.
Download or read book The Theory and Design of Gas Turbines and Jet Engines written by Edward Thomas Vincent and published by . This book was released on 1950 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Beskriver teorien bag og den gennerelle indretning af gasturbine- og jetmotorer. Egnet til undervisningsbrug.
Download or read book Jet Propulsion written by Nicholas Cumpsty and published by Cambridge University Press. This book was released on 2003-08-14 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of Cumpsty's excellent self-contained introduction to the aerodynamic and thermodynamic design of modern civil and military jet engines. Through two engine design projects, first for a new large passenger aircraft, and second for a new fighter aircraft, the text introduces, illustrates and explains the important facets of modern engine design. Individual sections cover aircraft requirements and aerodynamics, principles of gas turbines and jet engines, elementary compressible fluid mechanics, bypass ratio selection, scaling and dimensional analysis, turbine and compressor design and characteristics, design optimization, and off-design performance. The book emphasises principles and ideas, with simplification and approximation used where this helps understanding. This edition has been thoroughly updated and revised, and includes a new appendix on noise control and an expanded treatment of combustion emissions. Suitable for student courses in aircraft propulsion, but also an invaluable reference for engineers in the engine and airframe industry.
Download or read book Jet Propulsion written by Nicholas Cumpsty and published by Cambridge University Press. This book was released on 2015-07-22 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the design of modern civil and military jet engines using engine design projects.
Download or read book Turbomachinery Flow Physics and Dynamic Performance written by Meinhard T. Schobeiri and published by Springer Science & Business Media. This book was released on 2012-05-01 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: With this second revised and extended edition, the readers have a solid source of information for designing state-of-the art turbomachinery components and systems at hand. Based on fundamental principles of turbomachinery thermo-fluid mechanics, numerous CFD based calculation methods are being developed to simulate the complex 3-dimensional, highly unsteady turbulent flow within turbine or compressor stages. The objective of this book is to present the fundamental principles of turbomachinery fluid-thermodynamic design process of turbine and compressor components, power generation and aircraft gas turbines in a unified and compact manner. The book provides senior undergraduate students, graduate students and engineers in the turbomachinery industry with a solid background of turbomachinery flow physics and performance fundamentals that are essential for understanding turbomachinery performance and flow complexes. While maintaining the unifying character of the book structure in this second revised and extended edition all chapters have undergone a rigorous update and enhancement. Accounting for the need of the turbomachinery community, three chapters have been added, that deal with computationally relevant aspects of turbomachinery design such as boundary layer transition, turbulence and boundary layer.
Download or read book Jet Propulsion written by Nicholas A. Cumpsty and published by Cambridge University Press. This book was released on 1997-12-11 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a self-contained introduction to the aerodynamic and thermodynamic design of modern civil and military jet engines. Through two engine design projects, first for a new large passenger aircraft, and second for a new fighter aircraft, the text introduces, illustrates and explains the important facets of modern engine design. Individual sections cover aircraft requirements and aerodynamics, principles of gas turbines and jet engines, elementary compressible fluid mechanics, bypass ratio selection, scaling and dimensional analysis, turbine and compressor design and characteristics, design optimization, as well as off-design performance. Although the book assumes familiarity with basic fluid mechanical ideas, background is given where necessary. The book emphasises principles and ideas, with simplification and approximation used where this helps understanding. Many exercises (using numerical rather than algebraic solutions, with realistic empirical input where needed) support and reinforce the text. A detailed glossary is included. This text is suitable for student courses in aircraft propulsion and jet engine design, but will be invaluable as a guide and reference for engineers in the engine and airframe industry.
Download or read book Design of Modern Turbine Combustors written by A. M. Mellor and published by . This book was released on 1990 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lower pollutant emissions and broader multifuel flexibility are driving forces for advancing aircraft, vehicular, and industrial engine performance and versatility. Both are inherently connected with the design of the fuel injector and combustor system. The traditional concerns, improving durability and fuel economy over the life of the engine, remain additional requirements.**This volume offers a comprehensive treatment of modern practice aimed both at those in the field and newcomers interested in research and development for gas turbine combustors. Detailed description and assessment of a range of combustor design models and methods**Specification and evolution of fuels and fuel injectors**System models for fuel effects on engines and airframes**Evaluation of laser-based measurement techniques for combustor flow field studies
