Download or read book Design Operation and Economics of Large Wastewater Treatment Plants written by H. Bode and published by IWA Publishing (International Water Assoc). This book was released on 2000-05-31 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 8th Large Wastewater Treatment Plants conference was the first to mention economics explicitly in its title. This was to underline the fact that wastewater treatment issues cannot be addressed solely as scientific-technical problems, but are deeply embedded in a socio-economic context. This need for a holistic approach was stressed by many participants, to whom the idea of dealing with either technology or economics in isolation made no sense. Thirty-seven papers have been selected for these proceedings; they focus on the following areas: wastewater treatment in Hungary; large projects and case studies; planning, treatment processes and modelling for design; settling processes for activated sludge; operational experiences; industrial plants; sludge management; and costs and economics. These proceedings form an essential information source for anyone - manager, designer, engineer or scientist - involved in the design or operation of large wastewater treatment plants or the supply of equipment for them.
Download or read book Design Operation and Economics of Large Wastewater Treatment Plants written by and published by . This book was released on 2000 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biological Wastewater Treatment Principles Modeling and Design written by Guang-Hao Chen and published by IWA Publishing. This book was released on 2020-07-15 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this book was published in 2008 and it went on to become IWA Publishing’s bestseller. Clearly there was a need for it because over the twenty years prior to 2008, the knowledge and understanding of wastewater treatment had advanced extensively and moved away from empirically-based approaches to a fundamental first-principles approach based on chemistry, microbiology, physical and bioprocess engineering, mathematics and modelling. However the quantity, complexity and diversity of these new developments was overwhelming for young water professionals, particularly in developing countries without readily available access to advanced-level tertiary education courses in wastewater treatment. For a whole new generation of young scientists and engineers entering the wastewater treatment profession, this book assembled and integrated the postgraduate course material of a dozen or so professors from research groups around the world who have made significant contributions to the advances in wastewater treatment. This material had matured to the degree that it had been codified into mathematical models for simulation with computers. The first edition of the book offered, that upon completion of an in-depth study of its contents, the modern approach of modelling and simulation in wastewater treatment plant design and operation could be embraced with deeper insight, advanced knowledge and greater confidence, be it activated sludge, biological nitrogen and phosphorus removal, secondary settling tanks, or biofilm systems. However, the advances and developments in wastewater treatment have accelerated over the past 12 years since publication of the first edition. While all the chapters of the first edition have been updated to accommodate these advances and developments, some, such as granular sludge, membrane bioreactors, sulphur conversion-based bioprocesses and biofilm reactors which were new in 2008, have matured into new industry approaches and are also now included in this second edition. The target readership of this second edition remains the young water professionals, who will still be active in the field of protecting our precious water resources long after the aging professors who are leading some of these advances have retired. The authors, all still active in the field, are aware that cleaning dirty water has become more complex but that it is even more urgent now than 12 years ago, and offer this second edition to help the young water professionals engage with the scientific and bioprocess engineering principles of wastewater treatment science and technology with deeper insight, advanced knowledge and greater confidence built on stronger competence.
Download or read book Biological Wastewater Treatment written by Mogens Henze and published by IWA Publishing. This book was released on 2008-09-01 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: For information on the online course in Biological Wastewater Treatment from UNESCO-IHE, visit: http://www.iwapublishing.co.uk/books/biological-wastewater-treatment-online-course-principles-modeling-and-design Over the past twenty years, the knowledge and understanding of wastewater treatment have advanced extensively and moved away from empirically-based approaches to a first principles approach embracing chemistry, microbiology, physical and bioprocess engineering, and mathematics. Many of these advances have matured to the degree that they have been codified into mathematical models for simulation with computers. For a new generation of young scientists and engineers entering the wastewater treatment profession, the quantity, complexity and diversity of these new developments can be overwhelming, particularly in developing countries where access is not readily available to advanced level tertiary education courses in wastewater treatment. Biological Wastewater Treatment addresses this deficiency. It assembles and integrates the postgraduate course material of a dozen or so professors from research groups around the world that have made significant contributions to the advances in wastewater treatment. The book forms part of an internet-based curriculum in biological wastewater treatment which also includes: Summarized lecture handouts of the topics covered in book Filmed lectures by the author professors Tutorial exercises for students self-learning Upon completion of this curriculum the modern approach of modelling and simulation to wastewater treatment plant design and operation, be it activated sludge, biological nitrogen and phosphorus removal, secondary settling tanks or biofilm systems, can be embraced with deeper insight, advanced knowledge and greater confidence.
Download or read book Design Operation Interactions at Large Treatment Plants written by S. H. Jenkins and published by Elsevier. This book was released on 2017-04-07 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design-Operation Interactions at Large Treatment Plants deals with the different plans and designs to improve large treatment plans, the feasibility of these plans, the problems they might entail, and the solutions for current and prospective problems these treatment plants may face. The book shows the possible new directions that treatment plants may go to through assessment, planning, and new technology, as well as the the design for the treatment plants and the many considerations to be kept in mind in designing of one. Also included is an instructional guide on the functions an importance of the different parts of the treatment plant, the specific problems and their solutions, and improvements that can be done to it. The text is recommended for engineers and planners working in treatment plants, those in charge of sanitation and urban development and improvement, government agencies who wish to evaluate and even propose plans of building a treatment plant, and environmentalists who wish to know more about the treatment plant.
Download or read book Mathematical Modelling and Computer Simulation of Activated Sludge Systems written by Jacek Makinia and published by IWA Publishing. This book was released on 2020-03-02 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling and Computer Simulation of Activated Sludge Systems – Second Edition provides, from the process engineering perspective, a comprehensive and up-to-date overview regarding various aspects of the mechanistic (“white box”) modelling and simulation of advanced activated sludge systems performing biological nutrient removal. In the new edition of the book, a special focus is given to nitrogen removal and the latest developments in modelling the innovative nitrogen removal processes. Furthermore, a new section on micropollutant removal has been added. The focus of modelling has been shifting in the last years to models that can describe the performance of a whole plant (plant-wide modelling). The expanded part of this new edition introduces models describing the most important processes interrelated with the mainstream activated sludge systems as well as models describing the energy balance, operating costs and environmental impact. The complex process evaluation, including minimization of energy consumption and carbon footprint, is in line with the present and future wastewater treatment goals. By combining a general introduction and a textbook, this book serves both intermediate and more experienced model users, both researchers and practitioners, as a comprehensive guide to modelling and simulation studies. The book can be used as a supplemental material at graduate and post-graduate levels of wastewater engineering/modelling courses.
Download or read book Handbook of Biological Wastewater Treatment written by Adrianus van Haandel and published by IWA Publishing. This book was released on 2012-02-20 with total page 819 pages. Available in PDF, EPUB and Kindle. Book excerpt: The scope of this comprehensive new edition of Handbook of Biological Wastewater Treatment ranges from the design of the activated sludge system, final settlers, auxiliary units (sludge thickeners and digesters) to pre-treatment units such as primary settlers and UASB reactors. The core of the book deals with the optimized design of biological and chemical nutrient removal. The book presents the state-of-the-art theory concerning the various aspects of the activated sludge system and develops procedures for optimized cost-based design and operation. It offers a truly integrated cost-based design method that can be easily implemented in spreadsheets and adapted to the particular needs of the user. Handbook of Biological Wastewater Treatment: Second Edition incorporates valuable new material that improves the instructive qualities of the first edition. The book has a new structure that makes the material more readily understandable and the numerous additional examples clarify the text. On the website www.wastewaterhandbook.com three free excel design spreadsheets for different configurations (secondary treatment with and without primary settling and nitrogen removal) can be downloaded to get the reader started with their own design projects. New sections have been added throughout: to explain the difference between true and apparent yield while the section on the F/M ratio, and especially the reasons not to use it, has been expanded; to demonstrate the effect of the oxygen recycle to the anoxic zones on both the denitrification capacity and the concept of available nitrate is explained in more detail. the latest developments on the causes and solution to sludge bulking and scum formation to show the rapid developments of innovative nitrogen removal and sludge separation problems the anaerobic pre-treatment section is completely rewritten based on the experiences obtained from an extensive review of large full-scale UASB based sewage treatment plants a new section on industrial anaerobic wastewater treatment three new appendices have been added. These deal with the calibration of the denitrification model, empirical design guidelines for final settler design (STORA/STOWA and ATV) and with the potential for development of denitrification in the final settler. A new chapter on moving bed biofilm reactors Handbook of Biological Wastewater Treatment: Second Edition is written for post graduate students and engineers in consulting firms and environmental protection agencies. It is an invaluable resource for everybody working in the field of wastewater treatment. Lecturer support material is available when adopted for university courses. This includes course material for the first 7 modules in the form of PDF printouts and an exercise file with questions and answers and a symbol list. Authors: Prof. dr. ir. A.C. van Haandel, Federal University of Campina Grande - Brazil and Ir. J.G.M. van der Lubbe, Biothane Systems International - Veolia, The Netherlands
Download or read book Sewage Treatment Plants written by Katerina Stamatelatou and published by IWA Publishing. This book was released on 2015-05-15 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sewage Treatment Plants: Economic Evaluation of Innovative Technologies for Energy Efficiency aims to show how cost saving can be achieved in sewage treatment plants through implementation of novel, energy efficient technologies or modification of the conventional, energy demanding treatment facilities towards the concept of energy streamlining. The book brings together knowledge from Engineering, Economics, Utility Management and Practice and helps to provide a better understanding of the real economic value with methodologies and practices about innovative energy technologies and policies in sewage treatment plants.
Download or read book Mass Flow and Energy Efficiency of Municipal Wastewater Treatment Plants written by Cao Ye Shi and published by IWA Publishing. This book was released on 2011-09-14 with total page 133 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special Offer: Cao Ye Shi Author Set - Buy all three books together and save a total £76! Mass Flow and Energy Efficiency of Municipal Wastewater Treatment Plants presents the results of a series of studies that examined the mass flow and balance, and energy efficiency, of municipal wastewater treatment plants; it offers a vision of the future for municipal wastewater treatment plants. These studies were undertaken as part of the R & D program of the Public Utilities Board (PUB), Singapore. The book covers the latest practical and academic developments and provides: a detailed picture of the mass flow and transfer of Chemical Oxygen Demand (COD), solids, nitrogen and phosphorus and energy efficiency in a large municipal wastewater treatment plants in Singapore. The results are compared with the Strass wastewater treatment plant, Austria, which reaches energy self-sufficiency, and the approaches for improvement are proposed. a description of the biological conversions and mass flow and energy recovery in an up-flow anaerobic sludge blanket reactor - activated sludge process (UASB-ASP) - and compares this to the conventional activated sludge process. a comprehensive and critical review of the current state of the art of energy efficiency of municipal wastewater treatment plants including benchmarks, best available technologies and practices in energy saving and recovery, institution policies, and road maps to high energy recovery and high efficiency plants. a vision of future wastewater treatment plants including the major challenges of the paradigm shift from waste removal to resource recovery, technologies and processes to be studied, integrated sanitation system and management and policies. Mass Flow and Energy Efficiency of Municipal Wastewater Treatment Plants is a valuable reference on energy and sustainable management of municipal wastewater treatment plants, and will be especially useful for process and design researchers in wastewater research institutions, engineers, consultants and managers in water companies and water utilities, as well as students and academic staff in civil/sanitation/environment departments in universities.
Download or read book Chemical Water and Wastewater Treatment VIII written by Hermann H. Hahn and published by IWA Publishing. This book was released on 2004-11-01 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the wake of the Millennium Declaration and the Johannesburg resolutions, many countries have begun to address or re-write their policies regarding water supply and wastewater disposal. The goal is to provide high-quality drinking-water for more people and to safely dispose of spent waters from a large portion of the population than today. This book, as its predecessors, provides information and technical solutions to accomplish this mammoth task. It is the outcome of collective experience and know-how exchanged between experts in the field of water technology from all over the world: from the Americas, from central and southern Africa, from Europe and from different parts of Asia. The Chemical Water and Wastewater Treatment Series provides authoritative coverage of the key current developments in the chemical treatment of water and wastewater in theory or practice and related problems such as sludge production and properties, and the reuse of chemicals and chemically-treated waters and sludges. Chemical Water and Wastewater Treatment VIII is a valuable resource for managers, scientists, plant operators and others interested in chemical water and wastewater treatment technology.
Download or read book Operation of Wastewater Treatment Plants written by and published by . This book was released on 2004 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2nd IWA Leading Edge on Water and Wastewater Treatment Technologies written by Mark C. M. van Loosdrecht and published by IWA Publishing. This book was released on 2005-04-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wastewater and drinking water treatment are essential elements of urban infrastructure. In the course of the last century there has been enormous technical development, so successful that for the general public in industrialized countries this infrastructure is hardly noticed. Nevertheless there is ongoing activity to further improve the existing processes. The IWA Leading Edge Technology conference held in Prague helped to stimulate this development and this book helps disseminate the results. A selection of presentations from the conference are included in this volume. Wastewater and drinking-water treatment are normally considered as two separate fields due to the very different boundary conditions that apply. Nevertheless several issues such as membrane processes, removal of micropollutants and water reuse are of crucial importance to both. This potential for cross-fertilization further enhances the value of this collection of high-quality articles that delineate the leading edge of research and development in water and wastewater treatment.
Download or read book Treatment Wetlands for Environmental Pollution Control written by Hanna Obarska-Pempkowiak and published by Springer. This book was released on 2015-01-03 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to present an overview of the state of the art with regard to the function, application and design of TWSs in order to better protect surface water from contamination. Accordingly, it also presents applications of constructed wetlands with regard to climatic and cultural aspects. The use of artificial and natural treatment wetland systems (TWSs) for wastewater treatment is an approach that has been developed over the last thirty years. Europe is currently home to roughly 10,000 constructed wetland treatment systems (CWTSs), which simulate the aquatic habitat conditions of natural marsh ecosystems; roughly 3,500 systems are in operation in Germany alone. TWSs can also be found in many other European countries, for example 200 – 400 in Denmark, 400 – 600 in Great Britain, and ca. 1,000 in Poland. Most of the existing systems serve as local or individual household treatment systems. CWTSs are easy to operate and do not require specialized maintenance; further, no biological sewage sludge is formed during treatment processes. As TWSs are resistant to fluctuations in hydraulic loads, they are primarily used in rural areas as well as in urbanized areas with dispersed habitats, where conventional sewer systems and central conventional wastewater treatment plants (WWTPs) cannot be applied due to the high costs they would entail. TWSs are usually applied at the 2nd stage of domestic wastewater treatment, after mechanical treatment, and/or at the 3rd stage of treatment in order to ensure purification of effluent from conventional biological reactors and re-naturalization. New applications of TWSs include rainwater treatment as well as industrial and landfill leachate treatment. TWSs are well suited to these fields, as they can potentially remove not only organic matter and nitrogen compounds but also trace metals and traces of persistent organic pollutants and pathogens. Based on the practical experience gathered to date, and on new research regarding the processes and mechanisms of pollutant removal and advances in the systems properties and design, TWSs continue to evolve.
Download or read book The Economics of Regional Water Quality Management written by Allen V. Kneese and published by Routledge. This book was released on 2013-11-26 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2011. How clean should a stream be? And what represents an efficient way of bringing about desired conditions? These are the basic issues that confront those who are concerned with the husbandry of water resources through pollution control. This book offers form and substance to the concept of water quality management. It is unique in that it provides specific illustration of how theory and methodology of resources allocation may be employed in the formulation of rational decisions affecting water use and reuse.
Download or read book Design of Water Resource Recovery Facilities Manual of Practice No 8 Sixth Edition written by Water Environment Federation and published by McGraw Hill Professional. This book was released on 2017-09-29 with total page 2257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete Coverage of the State-of-the-Art in Water Resource Recovery Facility Design Featuring contributions from hundreds of wastewater engineering experts, this fully updated guide presents the latest in facility planning, configuration, and design. Design of Water Resource Recovery Facilities: WEF Manual of Practice No. 8 and ASCE Manuals and Reports on Engineering Practice No. 76, Sixth Edition, covers key technical advances in wastewater treatment, including •Advances with membrane bioreactors applications •Advancements within integrated fixed-film/activated sludge (IFAS) systems and moving-bed biological-reactors systems •Biotrickling filtration for odor control •Increased use of ballasted flocculation •Enhanced nutrient-control systems •Sidestream nutrient removal to reduce the loading on the main nutrient-removal process •Use and application of wireless instrumentation •Use and application of modeling wastewater treatment processes for the basis of design and evaluations of alternatives •Process design and disinfection practices to minimize generation of TTHMs and other organics monitored for potable water quality •Approaches to minimizing biosolids production and advances in biosolids handling, including effective thermal hydrolysis, and improvements in sludge thickening and dewatering technologies •Increasing goals toward energy neutrality and driving net zero •Trend toward resource recovery
Download or read book Process Design Manual for Upgrading Existing Wastewater Treatment Plants written by Metcalf & Eddy and published by . This book was released on 1974 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Single and Two Phase Flows on Chemical and Biomedical Engineering written by Ricardo Dias and published by Bentham Science Publishers. This book was released on 2012-07-30 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single and two-phase flows are ubiquitous in most natural process and engineering systems. Examples of systems or process include, packed bed reactors, either single phase or multiphase, absorber and adsorber separation columns, filter beds, plate heat exchangers, flow of viscoelastic fluids in polymer systems, or the enhanced recovery of oil, among others. In each case the flow plays a central role in determining the system or process behavior and performance. A better understanding of the underlying physical phenomena and the ability to describe the phenomena properly are both crucial to improving design, operation and control processes involving the flow of fluids, ensuring that they will be more efficient and cost effective. Expanding disciplines such as microfluidics and the simulation of complex flow physical systems, such as blood flow in physiological networks, also rely heavily on accurate predictions of fluid flow. Recent advances either in computational and experimental techniques are improving the existing knowledge of single and multiphase flows in engineering and physical systems of interest. This ebook is a review on the state-of-the-art and recent advances in critical areas of fluid mechanics and transport phenomena with respect to chemical and biomedical engineering applications.
