Download or read book Design of Wind Turbines with Ultra High Performance Concrete written by François-Xavier Jammes and published by . This book was released on 2009 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-High Performance Concrete (UHPC) has proven an asset for bridge design as it significantly reduces costs. However, UHPC has not been applied yet to wind turbine technology. Design codes do not propose any recommendations or guidance for the towers, thus encouraging the engineer to use less effective traditional materials like steel. The purpose of this thesis is to propose an efficient way to design UHPC wind turbines. First is explained the strategy to retain an optimal design. Then, the comparison with a similar steel model demonstrates that UHPC is both an economical and sustainable design solution for towers. This work is based on a combination of the UHPC 1D model developed at MIT and the interim recommendations provided by Association Franqaise de Genie Civil. The expression of the design loads and the resistant loads for a UHPC circular hollow section are presented based on available design codes. Then, the optimization process based on the previous model is established. It is achieved using two programs in order to satisfy both the Service Limit State (SLS) and the Ultimate Limit State (ULS). The best design is obtained for a SLS criteria deflection of L/800. The cost of material is reduced by a factor between 2 and 3 in comparison with traditional steel. All of this confirms that UHPC could be an innovative engineering solution for the realization of new wind turbine towers.

Download or read book Model based Design of an Ultra High Performance Concrete Support Structure for a Wind Turbine written by Zheng Wang (M. Eng.) and published by . This book was released on 2007 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Cont.) Two tube-type cross sections are examined. The 3-d analysis reveals a sufficient flexural performance of the UHPC support tower when subjected to the extreme wind loads. Since this work only focuses on the extreme wind load case, other load cases, such as aerodynamic and operational cases, should be considered before it can be safely employed.

Download or read book Concrete Structures for Wind Turbines written by Jürgen Grünberg and published by John Wiley & Sons. This book was released on 2013-09-10 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The wind energy industry in Germany has an excellent global standing when it comes to the development and construction of wind turbines. Germany currently represents the world's largest market for wind energy. The ongoing development of ever more powerful wind turbines plus additional requirements for the design and construction of their offshore foundation structures exceeds the actual experiences gained so far in the various disciplines concerned. This book gives a comprehensive overview for planning and structural design analysis of reinforced concrete and pre-stressed concrete wind turbine towers for both, onshore and offshore wind turbines. Wind turbines represent structures subjected to highly dynamic loading patterns. Therefore, for the design of loadbearing structures, fatigue effects - and not just maximum loads - are extremely important, in particular in the connections and joints of concrete and hybrid structures. There multi-axial stress conditions occure which so far are not covered by the design codes. The specific actions, the nonlinear behaviour and modeling for the structural analysis are explained. Design and verification with a focus on fatigue are adressed. The chapter Manufacturing includes hybrid structures, segmental construction of pre-stressed concrete towers and offshore wind turbine foundations. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.

Download or read book Ultra High Performance Concrete UHPC written by Ekkehard Fehling and published by John Wiley & Sons. This book was released on 2015-04-20 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since. Ultra high performance concrete (UHPC) is a milestone in concrete technology and application. It permits the construction of both more slender and more durable concrete structures with a prolonged service life and thus improved sustainability. This book is a comprehensive overview of UHPC - from the principles behind its production and its mechanical properties to design and detailing aspects. The focus is on the material behaviour of steel fibre-reinforced UHPC. Numerical modelling and detailing of the connections with reinforced concrete elements are featured as well. Numerous examples worldwide - bridges, columns, facades and roofs - are the basis for additional explanations about the benefits of UHPC and how it helps to realise several architectural requirements. The authors are extensively involved in the testing, design, construction and monitoring of UHPC structures. What they provide here is therefore a unique synopsis of the state of the art with a view to practical applications.

Download or read book Ultra High Performance Concrete and High Performance Building Materials for Sustainable Construction written by Ekkehard Fehling and published by BoD – Books on Demand. This book was released on 2024-01-01 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable construction, with the overarching goal of reducing the environmental footprint of everything we build is becoming increasingly important and urgent in the light of the climate change the world is facing. The use of innovative and sustainable building materials, especially concrete as the worldwide most commonly used building material, offers a great opportunity to significantly reduce climate-relevant emissions in the construction sector. Due to their performance and reliable durability, the use of innovative high-performance concretes will help to reduce the need for new constructions and to sustainably repair existing infrastructure. In new buildings in particular, the use of high-performance materials can help to save energy and natural resources, which reduces climate-relevant emissions and thus global warming. With the current HiPerMat 6, we are responding to the growing understanding of the impact of our construction activities on the environment by placing greater emphasis on sustainability issues.

Download or read book Proceedings of 6th International Conference on Civil Engineering and Architecture Vol 2 written by Thomas Kang and published by Springer Nature. This book was released on with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ultra High Performance Concrete and High Performance Construction Materials written by Ekkehard Fehling and published by kassel university press GmbH. This book was released on 2016-03-01 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ballastless Tracks written by Stephan Freudenstein and published by John Wiley & Sons. This book was released on 2018-04-30 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to increasing traffic flows the extension of transport infrastructure with rail roads and high speed lines is an ongoing process worldwide. Ballastless track systems with concrete slabs are used more and more. Following the first trials in the 1970s and more than four decades of R&D work on ballastless track, the level of development is such that it can be confirmed that ballastless track is suitable for use as an alternative to ballasted track. This book makes a contribution to the state of the art of ballastless track by describing the basics for designing the ballastless track. Important advice is provided regarding the construction of ballastless track on earthworks and in tunnels. There is also a description of the technical history of the development of ballastless track on bridges and the ensuing findings for bridge design. The state of the art of ballastless track for switches, important information on details concerning drainage, transitions, accessibility for road vehicles and experience gleaned from maintenance round off the work. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.

Download or read book Ultra High Performance Concrete and Nanotechnology in Construction Proceedings of Hipermat 2012 3rd International Symposium on UHPC and Nanotechnology for High Performance Construction Materials written by Insert Name Here and published by kassel university press GmbH. This book was released on 2012-01-01 with total page 1059 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book ACI ITG 9R 16 Report on Design of Concrete Wind Turbine Towers written by ACI Innovation Task Group 9 and published by . This book was released on 2016-10-19 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Innovation in Wind Turbine Design written by Peter Jamieson and published by John Wiley & Sons. This book was released on 2018-03-12 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aktualisiert und erweiterte Neuauflage dieses umfassenden Leitfadens zu Innovationen in der Entwicklung von Windkraftanlagen Die 2. Auflage von Innovation in Wind Turbine Design beschäftigt sich im Detail mit den Designgrundlagen, erläutert die Entscheidungsgründe für ein bestimmtes Design und beschreibt Methoden zur Bewertung innovativer Systeme und Komponenten. Die 2. Auflage wurde wesentlich erweitert und insgesamt aktualisiert. Neue Inhalte befassen sich mit den theoretischen Grundlagen von Antriebsscheiben in Bezug auf induktionsarme Rotoren. Wesentlich erweitert wurden die Abschnitte zu Offshore-Fragen und Flugwindkraftsystemen. Aktualisierte Inhalte beziehen sich auf Antriebsstränge und die grundlegende Theorie von Planetengetrieben und Differenzialgetrieben. Die Grundlagen der Windenergie und Irrtümer hinsichtlich des Designs von Rotoren mit Luftkanälen, Labor- und Feldtests der Rotorsysteme Katru und Wind Lens werden deutlicher herausgearbeitet. LiDAR wird kurz vorgestellt, ebenso die neuesten Entwicklungen beim Multi-Rotor-Konzept, darunter das Vier-Rotor-System von Vestas. Ein neues Kapitel beschäftigt sich mit dem innovativen DeepWind VAWT. Das Buch ist in vier Hauptabschnitte gegliedert: Hintergrundinformationen zu Designs, Technologiebewertung, Designthemen und innovative Technologiebeispiele. Wichtige Merkmale: - Stark erweiterte und um neue Inhalte ergänzt. - Deckt die Designgrundlagen umfassend ab, erläutert die Entscheidungsgründe für ein bestimmtes Design und beschreibt Methoden zur Bewertung innovativer Systeme und Komponenten. - Enthält innovative Beispiele aus der Praxis. - Jetzt mit Informationen zu den neuesten Entwicklungen in dem Fachgebiet. Dieses Buch ist ein Muss für Windkraftingenieure, Energieingenieure und Turbinenentwickler, Berater, Forscher und Studenten höherer Semester.

Download or read book Wind Energy Explained written by James F. Manwell and published by John Wiley & Sons. This book was released on 2010-09-14 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy’s bestselling textbook- fully revised. This must-have second edition includes up-to-date data, diagrams, illustrations and thorough new material on: the fundamentals of wind turbine aerodynamics; wind turbine testing and modelling; wind turbine design standards; offshore wind energy; special purpose applications, such as energy storage and fuel production. Fifty additional homework problems and a new appendix on data processing make this comprehensive edition perfect for engineering students. This book offers a complete examination of one of the most promising sources of renewable energy and is a great introduction to this cross-disciplinary field for practising engineers. “provides a wealth of information and is an excellent reference book for people interested in the subject of wind energy.” (IEEE Power & Energy Magazine, November/December 2003) “deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004) “a very comprehensive and well-organized treatment of the current status of wind power.” (Choice, Vol. 40, No. 4, December 2002)

Download or read book ACMSM25 written by Chien Ming Wang and published by Springer Nature. This book was released on 2019-09-03 with total page 1104 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents articles from The Australasian Conference on the Mechanics of Structures and Materials (ACMSM25 held in Brisbane, December 2018), celebrating the 50th anniversary of the conference. First held in Sydney in 1967, it is one of the longest running conferences of its kind, taking place every 2–3 years in Australia or New Zealand. Bringing together international experts and leaders to disseminate recent research findings in the fields of structural mechanics, civil engineering and materials, it offers a forum for participants from around the world to review, discuss and present the latest developments in the broad discipline of mechanics and materials in civil engineering.

Download or read book Wind Turbines written by Abdel Ghani Aissaoui and published by BoD – Books on Demand. This book was released on 2016-07-27 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable energies constitute excellent solutions to both the increase of energy consumption and environment problems. Among these energies, wind energy is very interesting. Wind energy is the subject of advanced research. In the development of wind turbine, the design of its different structures is very important. It will ensure: the robustness of the system, the energy efficiency, the optimal cost and the high reliability. The use of advanced control technology and new technology products allows bringing the wind energy conversion system in its optimal operating mode. Different strategies of control can be applied on generators, systems relating to blades, etc. in order to extract maximal power from the wind. The goal of this book is to present recent works on design, control and applications in wind energy conversion systems.

Download or read book Wind Energy Systems written by John Dalsgaard Sørensen and published by Elsevier. This book was released on 2010-12-20 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: Large-scale wind power generation is one of the fastest developing sources of renewable energy and already makes a substantial contribution to power grids in many countries worldwide. With technology maturing, the challenge is now to increase penetration, and optimise the design, construction and performance of wind energy systems. Fundamental issues of safety and reliability are paramount in this drive to increase capacity and efficiency.Wind energy systems: Optimising design and construction for safe and reliable operation provides a comprehensive review of the latest developments in the design, construction and operation of large-scale wind energy systems, including in offshore and other problematic environments.Part one provides detailed coverage of wind resource assessment and siting methods relevant to wind turbine and wind farm planning, as well as aeroelastics, aerodynamics, and fatigue loading that affect the safety and reliability of wind energy systems. This coverage is extended in part two, where the design and development of individual components is considered in depth, from wind turbine rotors to drive train and control systems, and on to tower design and construction. Part three explores operation and maintenance issues, such as reliability and maintainability strategies and condition monitoring systems, before discussing performance assessment and optimisation routes for wind energy systems in low wind speed environments and cold climates. Part four reviews offshore wind energy systems development, from the impact of environmental loads such as wind, waves and ice, to site specific construction and integrated wind farm planning, and of course the critical issues and strategies for offshore operation and maintenance.With its distinguished editors and international teams of contributors, Wind energy systems is a standard reference for wind power engineers, technicians and manufacturers, as well as researchers and academics involved in this expanding field. Reviews the latest developments in the design, construction and operation of large-scale wind energy systems Offers detailed coverage of wind resource assessment and siting methods relevant to wind turbine and wind farm planning Explores operation and maintenance issues, such as reliability and maintainability strategies and condition monitoring systems

Download or read book written by and published by World Scientific. This book was released on with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Designing Wind Turbines written by Uwe Ritschel and published by Springer Nature. This book was released on 2022-11-04 with total page 181 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designing a wind turbine is an interdisciplinary process that requires an understanding of challenges for all parties involved. The authors deliver an effective and economic way to organize such a design by respecting all the challenges involved. The book provides such insight by utilizing specific examples of existing modern designs. Detailed descriptions and explanations are given for those components of the wind turbine that are normally developed by the so-called original equipment manufacturers (OEM) of a particular type. The OEM needs to have full knowledge of the complete system that consists of all parts being rotor blades, nacelle, drive train, tower, and foundation including the dynamic properties and the response to the controller action. This full knowledge is called system competence. For a wind turbine the drive train is the most important system. It consists of many components like shafts, bearings, gearbox, and generator for a wind turbine with a gear box; in systems without a gearbox a large generator has to be integrated into the drive train.