Download or read book Design for Reactor Core Safety in Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 1986 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the mechanical, chemical, thermal, hydraulic, neutronic and irradiation considerations important to the safe design of a nuclear reactor core. The core features of commonly used reactor types including light and heavy water reactors, as well as gas cooled reactors, are addressed.
Download or read book Design of the Reactor Core for Nuclear Power Plants IAEA Safety Standards Series No Ssg 52 written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2020-02-28 with total page 69 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reactor core is the central part of a nuclear reactor where nuclear fission occurs. It consists of four basic systems and components: the fuel (including fuel rods and the fuel assembly structure), the coolant, the moderator and the control rods, as well as additional structures such as reactor pressure vessel internals, core support plates, and the lower and upper internal structure in light water reactors. This Safety Guide provides recommendations on meeting the safety requirements established in SSR-2/1 (Rev. 1) applied to the design of the reactor core for nuclear power plants. The publication addresses the safety aspects of the core design and includes neutronic, thermohydraulic, thermomechanical, and structural mechanical aspects. Other aspects considered are those relating to reactor core control, shutdown and monitoring, and core management.
Download or read book Design of the Reactor Core for Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2005 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication makes recommendations concerning safety features for incorporation into the design of the reactor core for a nuclear power plant, taking account of recent developments in the design of the reactor core and including guidance on general and specific design considerations. It supersedes IAEA Safety Series No. 50-SG-D14.
Download or read book Design of the Reactor Core for Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2019-12-31 with total page 87 pages. Available in PDF, EPUB and Kindle. Book excerpt: The reactor core is the central part of a nuclear reactor where nuclear fission occurs. It consists of four basic systems and components: the fuel (including fuel rods and the fuel assembly structure), the coolant, the moderator and the control rods, as well as additional structures such as reactor pressure vessel internals, core support plates, and the lower and upper internal structure in light water reactors. This Safety Guide provides recommendations on meeting the safety requirements established in IAEA Safety Standards Series No. SSR-2/1 (Rev. 1), Safety of Nuclear Power Plants: Design, applied to the design of the reactor core for nuclear power plants. The publication addresses the safety aspects of the core design and includes neutronic, thermohydraulic, thermomechanical and structural mechanical aspects. Other aspects considered are those relating to reactor core control, shutdown and monitoring, and core management.
Download or read book Design of the Reactor Core for Nuclear Power Plants written by International Atomic Energy Agency and published by IAEA. This book was released on 2005 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication makes recommendations concerning safety features for incorporation into the design of the reactor core for a nuclear power plant, taking account of recent developments in the design of the reactor core and including guidance on general and specific design considerations. It supersedes IAEA Safety Series No. 50-SG-D14.
Download or read book Safety of Nuclear Power Plants written by International Atomic Energy Agency and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.
Download or read book Design of the Reactor Containment and Associated Systems for Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2019-12-09 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on meeting the requirements of IAEA Safety Standards Series No. SSR-2/1 (Rev. 1) relevant to reactor containment and associated systems. The publication addresses the containment structure and the systems with the functions of isolation, control and management of mass and energy releases, control and limitation of radioactive releases, and control and management of combustible gases. The Safety Guide is intended for use primarily for land based, stationary nuclear power plants with water cooled reactors designed for electricity generation or for other heat generating applications, such as for district heating or desalination.
Download or read book Applicability of IAEA Safety Standards to Non Water Cooled Reactors and Small Modular Reactors written by IAEA and published by International Atomic Energy Agency. This book was released on 2023-06-12 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: In response to an increase in global activities related to non-water-cooled reactors and small modular reactors, this new Safety Report documenting areas of novelty of these technologies when compared to the current fleet of reactors has been developed. The impact of these areas of novelty on the applicability and completeness of the IAEA safety standards is assessed in the publication. Gaps and areas for additional consideration are identified. The review undertaken to develop this report encompassed the safety standards related to the lifetime of these reactor technologies. The publication also considers the interface between safety, security, and safeguards in the design of these technologies.
Download or read book Format and Content of the Safety Analysis Report for Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2021-09-22 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on the structure and content of the safety analysis report to be submitted by the operating organization to the regulatory body for authorization of the siting, construction, commissioning, operation and decommissioning of a nuclear power plant. It is intended to facilitate both the development of the safety analysis report by the operating organization and the checking of its completeness and adequacy by the regulatory body. The publication is a revision of IAEA Safety Standards Series No. GS-G-4.1, Format and Content of the Safety Analysis Report for Nuclear Power Plants, which it supersedes. The revision reflects feedback experience from the Fukushima Daiichi accident and the subsequent stress tests performed. It also describes good practices and experience from the use of safety analysis reports for newly built nuclear power plants in different States and informs on recent progress made in approaches to safety assessment.
Download or read book Design Extension Conditions and the Concept of Practical Elimination in the Design of Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2024-02-06 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this Safety Guide is to provide recommendations for the design of new nuclear power plants related to defense in depth and the practical elimination of plant event sequences that could lead to an early radioactive release or a large radioactive release. It also provides recommendations in relation to design aspects of defense in depth, in particular on those aspects associated with design extension conditions. Since the introduction of the term "practical elimination" in the early 90's and the recognition that accident conditions could include design extension conditions without significant fuel degradation and design extension conditions with core melting, those topics have been the subject of extensive discussions and several publications. The purpose of this publication is to facilitate international consensus on the understanding of those topics among regulators and designers and to provide recommendations for their consistent implementation in relevant nuclear power plant designs. In particular, this Specific Safety Guide gives recommendations related to the demonstration of the implementation of the practical elimination concept for those plant event sequences that could lead to an early radioactive release or a large radioactive release, which relies on the physical impossibility or on the high-level confidence that they are extremely unlikely to arise.
Download or read book Design of the Reactor Coolant System and Associated Systems for Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2020-03-03 with total page 117 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on how to meet the requirements established in IAEA Safety Standards Series No. SSR-2/1 (Rev. 1) in relation to the reactor coolant system and associated systems for nuclear power plants. It is a revision of IAEA Safety Standards Series No. NS-G-1.9, which it supersedes. The publication takes into account developments, experience and practices in the design of nuclear power plants throughout their lifetime. It references and considers other IAEA safety standards that are relevant and related to the design of the reactor coolant system and associated systems for nuclear power plants. Recommendations to achieve the required reliability of the capabilities designed to transfer residual heat to the ultimate heat sink in the different plant states are also included. As those systems are dependent on specific reactor technologies, more appropriate recommendations have been developed respectively for pressurized light water reactors, boiling water reactors and pressurized heavy water reactors.
Download or read book Design of the Reactor Containment and Associated Systems for Nuclear Power Plants written by IAEA and published by International Atomic Energy Agency. This book was released on 2019-12-09 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide provides recommendations on meeting the requirements of IAEA Safety Standards Series No. SSR-2/1 (Rev. 1) relevant to reactor containment and associated systems. The publication addresses the containment structure and the systems with the functions of isolation, control and management of mass and energy releases, control and limitation of radioactive releases, and control and management of combustible gases. The Safety Guide is intended for use primarily for land based, stationary nuclear power plants with water cooled reactors designed for electricity generation or for other heat generating applications, such as for district heating or desalination.
Download or read book Development and Application of Level 1 Probabilistic Safety Assessment for Nuclear Power Plants written by International Atomic Energy Agency and published by International Atomic Energy Agency. This book was released on 2024-04-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this Safety Guide is to provide recommendations for meeting the requirements of GSR Part 4 (Rev. 1) in the development and application of Level 1 Probabilistic Safety Assessments (PSAs) for nuclear power plants (NPPs). The recommendations provided in this publication promoting technical consistency among Level 1 PSA studies, in order to provide reliable support for applications of PSAs and risk informed decision making, particularly to support the design of NPPs and decision making during plant commissioning and operation. The revised Safety Guide's scope encompasses the main methodological aspects of PSA and in particular has been updated to reflect developments in specific areas, such as passive systems reliability, computer based systems reliability, combinations of hazards, human reliability analysis and to expand the scope of PSA to include site level risk considerations such as multi-unit and spent fuel pool PSA.
Download or read book Safety in the Utilization and Modification of Research Reactors written by IAEA and published by International Atomic Energy Agency. This book was released on 2022-09-01 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Guide is a revision of IAEA Safety Standards Series No. SSG-24, which it supersedes. The current publication provides recommendations on how to meet the applicable safety requirements relating to the utilization and modification of research reactors. The recommendations focus on the categorization, safety assessment and approval of research reactor experiments and modification projects. The publication also incorporates the relevant lessons learned from the accident at the Fukushima Daiichi nuclear power plant and elaborates on interfaces between nuclear safety and nuclear security. Specific safety considerations in different phases of utilization and modification projects are covered, including preimplementation, implementation, and post implementation phases. Guidance is given on operational safety of experiments, including the handling, dismantling, post-irradiation examination and disposal of experimental devices. The publication is intended to be of use to individuals within the operating organizations of research reactors, regulatory bodies, as well as the experimenters, technical support organizations and other persons involved in utilization and modification projects.
Download or read book Safety of Nuclear Power Plants Design written by International Atomic Energy Agency and published by . This book was released on 2000 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: Establishes design requirements for safety functions and associated structures, systems and components important to the safe operation of nuclear power plants. This publication also establishes requirements for a comprehensive safety assessment to identify the potential hazards that may arise in the operation of plants.
Download or read book Licensing Process for Nuclear Installations written by and published by . This book was released on 2010 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This Safety Guide describes how the licensing process should be applied at the various stages of the lifetime of a nuclear installation, with discussion of topics and required documents to be considered at each stage. Recommendations on the application by a regulatory body of a graded approach in the licensing process are also provided. It also describes the processes that should be undertaken to meet the regulatory and legal requirements in a Member State to authorize the establishment of a nuclear installation and/or initiation of its activities. While this Safety Guide focuses on safety at nuclear installations, it is noted that integration of safety and security aspects should be considered and evaluated by the regulatory body in the licensing process."--Provided by publisher.
Download or read book Methodologies for Seismic Safety Evaluation of Existing Nuclear Installations written by IAEA and published by International Atomic Energy Agency. This book was released on 2020-08-26 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experience shows that an assessment of the seismic capacity of an existing operating facility can be required for a number of reasons, for example identification of potential seismic vulnerabilities based on operating experience events or the periodic safety review programme. This publication covers the seismic safety evaluation programmes to be performed on existing nuclear installations in order to ensure that the required fundamental safety functions are available, with particular attention to the safe shutdown of reactors. It includes lessons learned based on the IAEA Action Plan on Nuclear Safety following the Fukushima Daiichi accident, and updated methodologies for seismic safety evaluation of nuclear installations.
