Download or read book Design of Spiral Antenna Array and Communication System for X band CubeSat in Lunar Orbit written by Katelyn Isbell and published by . This book was released on 2020 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advancements in the design of CubeSats, a type of nanosatellite, have allowed missions to include lunar, asteroid, and planetary destinations. Communication for deep space CubeSats poses new challenges for researchers in terms of transmitting and receiving range capabilities, reliability, and power and size limitations. An X-band downlink communication system is designed to address link budget and CubeSat system requirements for a lunar orbit. An Archimedean spiral antenna array backed by a novel sloped wall cavity and fed with a Klopfenstein impedance taper and power splitter is designed and characterized. An X-band transmitter is designed to fulfill the link budget and is analyzed for RF performance.
Download or read book Antenna Design for CubeSats written by Reyhan Baktur and published by Artech House. This book was released on 2021-12-31 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: A CubeSat is a miniaturized modular satellite that can be constructed from off-the-shelf components. With advancements in digital signal processing, power electronics, and packaging technology, it is feasible to fit science instruments and communication devices that were traditionally carried on larger satellites on CubeSat consolations. This not only reduces mission cost, repair, risk, but also provides more precise and real-time science data. Their low cost and versatility allow for CubeSats to be used to test technologies that are planned to use on larger satellites, to collect point-to-point data in space when launched as CubeSat constellations, or to monitor health of larger spacecrafts. This comprehensive reference explores CubeSat standards, launching methods, and detailed design guidelines for antennas specially made for CubeSat applications. Deployed CubeSat antennas, such as low gain antennas, high gain wire-based antennas, and horn and dish antennas as they relate to the technology are explored. Conformal CubeSat Antennas, including those that are independent of CubeSats and those integrated in CubeSat solar panels, are discussed. An antenna design guideline is provided to demonstrate the basics of a CubeSat link budget, which is transitionally published in signal and system community. Written by an expert in the field, this book enables readers to read antenna specifics when choosing communication front-end.
Download or read book CubeSat Antenna Design written by Nacer Chahat and published by John Wiley & Sons. This book was released on 2021-01-07 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an overview of CubeSat antennas designed at the Jet Propulsion Laboratory (JPL) CubeSats—nanosatellites built to standard dimensions of 10cm x 10 cm x cm—are making space-based Earth science observation and interplanetary space science affordable, accessible, and rapidly deployable for institutions such as universities and smaller space agencies around the world. CubeSat Antenna Design is an up-to-date overview of CubeSat antennas designed at NASA’s Jet Propulsion Laboratory (JPL), covering the systems engineering knowledge required to design these antennas from a radio frequency and mechanical perspective. This authoritative volume features contributions by leading experts in the field, providing insights on mission-critical design requirements for state-of-the-art CubeSat antennas and discussing their development, capabilities, and applications. The text begins with a brief introduction to CubeSats, followed by a detailed survey of low-gain, medium-gain, and high-gain antennas. Subsequent chapters cover topics including the telecommunication subsystem of Mars Cube One (MarCO), the enabling technology of Radar in a CubeSat (RainCube), the development of a one-meter mesh reflector for telecommunication at X- and Ka-band for deep space missions, and the design of multiple metasurface antennas. Written to help antenna engineers to enable new CubeSate NASA missions, this volume: Describes the selection of high-gain CubeSat antennas to address specific mission requirements and constraints for instruments or telecommunication Helps readers learn how to develop antennas for future CubeSat missions Provides key information on the effect of space environment on antennas to inform design steps Covers patch and patch array antennas, deployable reflectarray antennas, deployable mesh reflector, inflatable antennas, and metasurface antennas CubeSat Antenna Design is an important resource for antenna/microwave engineers, aerospace systems engineers, and advanced graduate and postdoctoral students wanting to learn how to design and fabricate their own antennas to address clear mission requirements.
Download or read book Guidelines and Metrics for Assessing Space System Cost Estimates written by Bernard Fox and published by RAND Corporation. This book was released on 2008 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Introduction / 2. Space system fundamentals / 3. Reviewing a cost estimate / 4. Space vehicle cost crosschecks / 5. Common issues in estimating space programs / 6. Resources for space system cost estimation / 7. Recommendations.
Download or read book CubeSat Handbook written by Chantal Cappelletti and published by Academic Press. This book was released on 2020-09-25 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: CubeSat Handbook: From Mission Design to Operations is the first book solely devoted to the design, manufacturing, and in-orbit operations of CubeSats. Beginning with an historical overview from CubeSat co-inventors Robert Twiggs and Jordi Puig-Suari, the book is divided into 6 parts with contributions from international experts in the area of small satellites and CubeSats. It covers topics such as standard interfaces, on-board & ground software, industry standards in terms of control algorithms and sub-systems, systems engineering, standards for AITV (assembly, integration, testing and validation) activities, and launch regulations. This comprehensive resource provides all the information needed for engineers and developers in industry and academia to successfully design and launch a CubeSat mission. Provides an overview on all aspects that a CubeSat developer needs to analyze during mission design and its realization Features practical examples on how to design and deal with possible issues during a CubeSat mission Covers new developments and technologies, including ThinSats and PocketQubeSats
Download or read book Spacecraft Attitude Determination and Control written by J.R. Wertz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: Roger D. Werking Head, Attitude Determination and Control Section National Aeronautics and Space Administration/ Goddard Space Flight Center Extensiye work has been done for many years in the areas of attitude determination, attitude prediction, and attitude control. During this time, it has been difficult to obtain reference material that provided a comprehensive overview of attitude support activities. This lack of reference material has made it difficult for those not intimately involved in attitude functions to become acquainted with the ideas and activities which are essential to understanding the various aspects of spacecraft attitude support. As a result, I felt the need for a document which could be used by a variety of persons to obtain an understanding of the work which has been done in support of spacecraft attitude objectives. It is believed that this book, prepared by the Computer Sciences Corporation under the able direction of Dr. James Wertz, provides this type of reference. This book can serve as a reference for individuals involved in mission planning, attitude determination, and attitude dynamics; an introductory textbook for stu dents and professionals starting in this field; an information source for experimen ters or others involved in spacecraft-related work who need information on spacecraft orientation and how it is determined, but who have neither the time nor the resources to pursue the varied literature on this subject; and a tool for encouraging those who could expand this discipline to do so, because much remains to be done to satisfy future needs.
Download or read book Ames Research Center written by and published by . This book was released on 1968 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Space Mission Engineering written by James Richard Wertz and published by . This book was released on 2011-01-01 with total page 1033 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a completely rewritten, updated, and expanded follow-on to the 3rd edition of Space mission analysis and design.
Download or read book Deep Space Propulsion written by K. F. Long and published by Springer Science & Business Media. This book was released on 2011-11-25 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology of the next few decades could possibly allow us to explore with robotic probes the closest stars outside our Solar System, and maybe even observe some of the recently discovered planets circling these stars. This book looks at the reasons for exploring our stellar neighbors and at the technologies we are developing to build space probes that can traverse the enormous distances between the stars. In order to reach the nearest stars, we must first develop a propulsion technology that would take our robotic probes there in a reasonable time. Such propulsion technology has radically different requirements from conventional chemical rockets, because of the enormous distances that must be crossed. Surprisingly, many propulsion schemes for interstellar travel have been suggested and await only practical engineering solutions and the political will to make them a reality. This is a result of the tremendous advances in astrophysics that have been made in recent decades and the perseverance and imagination of tenacious theoretical physicists. This book explores these different propulsion schemes – all based on current physics – and the challenges they present to physicists, engineers, and space exploration entrepreneurs. This book will be helpful to anyone who really wants to understand the principles behind and likely future course of interstellar travel and who wants to recognizes the distinctions between pure fantasy (such as Star Trek’s ‘warp drive’) and methods that are grounded in real physics and offer practical technological solutions for exploring the stars in the decades to come.
Download or read book Handbook of Reflector Antennas and Feed Systems Volume III Applications of Reflectors written by Sudhakar Rao and published by Artech House. This book was released on 2013-06-01 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first truly comprehensive and most up-to-date handbook available on modern reflector antennas and feed sources for diversified space and ground applications. There has never been such an all-encompassing reflector handbook in print, and no currently available title offers coverage of such recent research developments. The Handbook consists of three volumes. Volume III focuses on the range of reflector antenna applications, including space, terrestrial, and radar. The intent of this book volume is to provide practical applications and design information on reflector antennas used for several communications systems. This book covers recent developments of reflector antennas used for satellite communications, terrestrial communications, and remote sensing applications. New subjects are introduced for the first time, including satellite antennas, Terahertz antennas, PIM, multipaction, corona, deployable mesh reflector antennas, and mechanical aspects of reflector antennas. In addition, this book contains a separate topic on integrated feed assembly for reflector antennas covering analysis, design, fabrication, and test.
Download or read book Space 2 0 written by Joseph N. Pelton and published by Springer. This book was released on 2019-04-26 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: A true revolution has rocked the space industry, as Silicon Valley and new startup companies around the world have shaken up the status quo. This has in turn triggered a hefty response among traditional aerospace companies, launching the sector into the new Space 2.0. This book explains how and why this remarkable change has happened, starting from the industry’s origins during the Space Age and working its way to the present day. No other industry in the world has experienced the dramatic shift in technology and services as rapidly as the field of satellite services and rocket launch systems has. This book analyzes the dynamic shift over the past decade in how satellites are designed, manufactured, launched, and operated. It also turns an eye to the future, discussing the amazing feats and potential issues we can expect from this shifting arena by 2030. With its beginner-friendly writing style and plethora of illustrations, this book serves as a perfect introductory text to students and professionals alike wishing to learn more about the key trends in the field of space applications and launch systems.
Download or read book Microwave Tomography written by Sima Noghanian and published by Springer. This book was released on 2014-07-08 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a detailed overview on the use of global optimization and parallel computing in microwave tomography techniques. The book focuses on techniques that are based on global optimization and electromagnetic numerical methods. The authors provide parallelization techniques on homogeneous and heterogeneous computing architectures on high performance and general purpose futuristic computers. The book also discusses the multi-level optimization technique, hybrid genetic algorithm and its application in breast cancer imaging.
Download or read book Compact Antennas for Wireless Communications and Terminals written by Jean-Marc Laheurte and published by John Wiley & Sons. This book was released on 2012-12-27 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Antennas for Wireless Communications and Terminals deals with compact microwave antennas and, more specifically, with the planar version of these antennas. Planar antennas are the most appropriate type of antenna in modern communication systems and more generally in all applications requiring miniaturization, integration and conformation such as in mobile phone handsets. The book is suitable for students, engineers and scientists eager to understand the principles of planar and small antennas, their design and fabrication issues, and modern aspects such as UWB antennas, reconfigurable antennas and diversity issues.
Download or read book Additive Manufacturing written by Amit Bandyopadhyay and published by CRC Press. This book was released on 2015-09-08 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of additive manufacturing has seen explosive growth in recent years due largely in part to renewed interest from the manufacturing sector. Conceptually, additive manufacturing, or industrial 3D printing, is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Today, mo
Download or read book European Russian Space Cooperation written by Brian Harvey and published by Springer Nature. This book was released on 2021-04-10 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: The story of European-Russian collaboration in space is little known and its importance all too often understated. Because France was the principal interlocutor between these nations, such cooperation did not receive the attention it deserved in English-language literature. This book rectifies that history, showing how Russia and Europe forged a successful partnership that has continued to the present day. Space writer Brian Harvey provides an in-depth picture of how this European-Russian relationship evolved and what factors—scientific, political and industrial—propelled it over the decades. The history begins in the cold war period with the first collaborative ventures between the Soviet Union and European countries, primarily France, followed later by Germany and other European countries. Next, the chapters turn to the missions when European astronauts flew to Russian space stations, the Soyuz rocket made a new home in European territory in the South American jungle and science missions were flown to study deep space. Their climax is the joint mission to explore Mars, called ExoMars, which has already sent a mission to Mars. Through this close examination of these European-Russian efforts, readers will appreciate an altogether new perspective on the history of space exploration, no longer defined by competition, but rather by collaboration and cooperation.
Download or read book Space Tethers and Space Elevators written by Michel van Pelt and published by Springer Science & Business Media. This book was released on 2009-06-12 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Michel van Pelt explains for the first time the principle of space tethers: what they are and how they can be used in space. He introduces non-technical space enthusiasts to the various possibilities and feasibility of space tethers including the technological challenges and potential benefits. He illustrates how, because of their inherent simplicity, space tethers have the potential to make space travel much cheaper, while ongoing advances in tether material technology may make even seemingly far-fetched ideas a reality in the not too distant future.
Download or read book DIY Instruments for Amateur Space written by Sandy Antunes and published by "O'Reilly Media, Inc.". This book was released on 2013 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt: La 4e de couverture indique : "Whether your picosatellite is watching the Earth or gazing at the stars, you need to know what you're sensing. This do-it-yourself guide explains what you can measure---and the constraints on those measurements---when you're orbiting the Earth. Learn exactly what physical quantities you can measure, and how to plan your sensor loadout. The perfect follow-up to DIY Satellite Platforms (our primer for designing and building a picosatellite), this book takes you beyond just flying a camera in space and shows you what data you can gather and play with using your own personal satellite. Learn about all the sensors you can select for your mission; get acquainted with key electronic communications protocols; I2C, TTL, SPI, analog, and digital; find out how much more your instruments can "see" when they're above the atmosphere; Understand how to calibrate sensors and how to pick the signal out of the noise; determine the optimal data acquisition rate for your available bandwith; [and] look at off-the-shelf sensor hardware and CPU choices (such as Arduino)"
