Download or read book Proceedings of 19th Latin American Control Congress LACC 2022 written by Orestes Llanes-Santiago and published by Springer Nature. This book was released on 2023-05-09 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the main results of the 19th Latin American Congress of Automatic Control held in November 2022 in Havana, Cuba. The Congress showed several main research results obtained by researchers from diverse countries in the last four years. Of the papers sent to Congress, 28 were finally accepted for presentation after a rigorous analysis of scientific novelty and quality. For their presentation in this book, the papers were divided into 5 major sections that appear in the following order: Part 1. Robust and Nonlinear Control The main research topics addressed in this part are related to fault-tolerant control loops, control by sliding modes, and robust tuning of PID controllers. Examples of electrical motors and chemical processes are used to demonstrate the feasibility of using the proposed techniques. Part 2. Fault Diagnosis in Industrial Systems Fault diagnosis in industrial plants is a very important topic in the Industry 4.0 paradigm. In this part, new techniques of fault diagnosis in mechanical systems using Poincaré features; a real case study for predicting the time of the remaining job cycle at a water treatment plant; and a predictive fault diagnosis for isolated photovoltaic systems are presented. A novel methodology for detecting and locating cyber-attacks in water distribution networks using computational intelligence tools is also presented. Part 3. Robotic and Autonomous Systems New control strategies for path following for autonomous tractors and unmanned aquatic vehicles are analyzed in this part. Moreover, the important topic related to the battery health-aware model predictive control planning for autonomous racing vehicles and the use of robots for monitoring and remediation applications are examined. Part 4. Modeling, Identification, and Delayed Systems A model-based methodology for the efficient selection of centrifugal pumps; the use of probabilistic Boolean networks in smart grid models; the utilization of PSO metaheuristic algorithm in the selection of a model structure; and two schemes to control high-order delayed systems are among the main topics examined in this part. Part 5. Low-Cost Systems and Biomedical Applications In this part, some applications of low-cost monitoring and control systems and two automatic systems used for the characterization of creatinine in wastes samples during hemodialysis process and differential acquisition of blood pressure are shown.
Download or read book Optimal Fractional order Predictive PI Controllers written by Arun Mozhi Devan Panneer Selvam and published by Springer Nature. This book was released on 2022-11-01 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the study to design, develop, and implement improved PI control techniques using dead-time compensation, structure enhancements, learning functions and fractional ordering parameters. Two fractional-order PI controllers are proposed and designed: fractional-order predictive PI and hybrid iterative learning based fractional-order predictive PI controller. Furthermore, the proposed fractional-order control strategies and filters are simulated over first- and second-order benchmark process models and further validated using the real-time experimentation of the pilot pressure process plant. In this book, five chapters are structured with a proper sequential flow of details to provide a better understanding for the readers. A general introduction to the controllers, filters and optimization techniques is presented in Chapter 1. Reviews of the PI controllers family and their modifications are shown in the initial part of Chapter 2, followed by the development of the proposed fractional-order predictive PI (FOPPI) controller with dead-time compensation ability. In the first part of chapter 3, a review of the PI based iterative learning controllers, modified structures of the ILC and their modifications are presented. Then, the design of the proposed hybrid iterative learning controller-based fractional-order predictive PI controller based on the current cyclic feedback structure is presented. Lastly, the results and discussion of the proposed controller on benchmark process models and the real-time experimentation of the pilot pressure process plant are given. Chapter 4 presents the development of the proposed filtering techniques and their performance comparison with the conventional methods. Chapter 5 proposes the improvement of the existing sine cosine algorithm (SCA) and arithmetic optimization algorithm (AOA) to form a novel arithmetic-trigonometric optimization algorithm (ATOA) to accelerate the rate of convergence in lesser iterations with mitigation towards getting caught in the same local position. The performance analysis of the optimization algorithm will be carried out on benchmark test functions and the real-time pressure process plant.
Download or read book Collaborative Process Automation Systems written by Martin Hollender and published by ISA. This book was released on 2010 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive overview of the state-of-the-art in Collaborative Process Automation Systems (CPAS), this book discusses topics such as engineering, security, enterprise connectivity, advanced process control, plant asset management, and operator efficiency. Collaborating with other industry experts, the author covers the system architecture and infrastructure required for a CPAS, as well as important standards like OPC and the ISA-95 series of standards. This in-depth reference focuses on the differences between a CPAS and traditional automation systems. Implications on modern automation systems are outlined in theory and practice. This book is ideal for industrial engineers, as well as graduate students in control and automation.
Download or read book Friction Stir Welding and Processing VIII written by Rajiv Mishra and published by Springer. This book was released on 2016-12-01 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection focuses on all aspects of science and technology related to friction stir welding and processing.
Download or read book Friction Stir Welding and Processing XI written by Yuri Hovanski and published by Springer Nature. This book was released on 2021-02-16 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents fundamentals and the current status of friction stir welding (FSW) and solid-state friction stir processing of materials, and provides researchers and engineers with an opportunity to review the current status of the friction stir related processes and discuss the future possibilities. Contributions cover various aspects of friction stir welding and processing including their derivative technologies. Topics include but are not limited to: • derivative technologies • high-temperature lightweight applications • industrial applications • dissimilar alloys and/or materials • controls and nondestructive examination • simulation • characterization
Download or read book Innovative Process Development in Metallurgical Industry written by Vaikuntam Iyer Lakshmanan and published by Springer. This book was released on 2015-10-26 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the phases for innovative metallurgical process development, from concept to commercialization. Key features of the book include: • Need for process innovation • Selection and optimization of process steps • Determination of the commercial feasibility of a process including engineering and equipment selection • Determination of the environmental footprint of a process • Case-study examples of innovative process development
Download or read book PID Control System Design and Automatic Tuning using MATLAB Simulink written by Liuping Wang and published by John Wiley & Sons. This book was released on 2020-04-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers PID control systems from the very basics to the advanced topics This book covers the design, implementation and automatic tuning of PID control systems with operational constraints. It provides students, researchers, and industrial practitioners with everything they need to know about PID control systems—from classical tuning rules and model-based design to constraints, automatic tuning, cascade control, and gain scheduled control. PID Control System Design and Automatic Tuning using MATLAB/Simulink introduces PID control system structures, sensitivity analysis, PID control design, implementation with constraints, disturbance observer-based PID control, gain scheduled PID control systems, cascade PID control systems, PID control design for complex systems, automatic tuning and applications of PID control to unmanned aerial vehicles. It also presents resonant control systems relevant to many engineering applications. The implementation of PID control and resonant control highlights how to deal with operational constraints. Provides unique coverage of PID Control of unmanned aerial vehicles (UAVs), including mathematical models of multi-rotor UAVs, control strategies of UAVs, and automatic tuning of PID controllers for UAVs Provides detailed descriptions of automatic tuning of PID control systems, including relay feedback control systems, frequency response estimation, Monte-Carlo simulation studies, PID controller design using frequency domain information, and MATLAB/Simulink simulation and implementation programs for automatic tuning Includes 15 MATLAB/Simulink tutorials, in a step-by-step manner, to illustrate the design, simulation, implementation and automatic tuning of PID control systems Assists lecturers, teaching assistants, students, and other readers to learn PID control with constraints and apply the control theory to various areas. Accompanying website includes lecture slides and MATLAB/ Simulink programs PID Control System Design and Automatic Tuning using MATLAB/Simulink is intended for undergraduate electrical, chemical, mechanical, and aerospace engineering students, and will greatly benefit postgraduate students, researchers, and industrial personnel who work with control systems and their applications.
Download or read book Feedback Controllers for the Process Industries written by F. Greg Shinskey and published by McGraw-Hill Professional Publishing. This book was released on 1994 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text combines operational and mathematical descriptions of all the feedback controllers that have been used in the process industries, comparing their performance and stability in many commonly encountered processes. The control theory presented is illustrated by numerous simulations.
Download or read book Robust Control Design with MATLAB written by Da-Wei Gu and published by Springer Science & Business Media. This book was released on 2005-06-20 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows readers how to exploit the capabilities of the MATLAB® Robust Control and Control Systems Toolboxes to the fullest using practical robust control examples.
Download or read book Robust Intelligent Systems written by Alfons Schuster and published by Springer Science & Business Media. This book was released on 2008-08-06 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our time recognizes robustness as an important, all-pervading feature in the world around us. Despite its omnipresence, robustness is not entirely understood, rather dif?cult to de?ne, and, despite its obvious value in many situations, rather dif?cult to achieve. One of the goals of this edited book is to report on the topic of robustness from a variety and diverse range of ?elds and perspectives. We are interested, for instance, in fundamental strategies nature applies to make systems robust—and arguably “intelligent”—and how these strategies may hold as general design principles in modern technology. A particular focus is on computer-based systems and appli- tions. This in mind, the book has four main sections: Part I has a look at robustness in terms of underlying technologies and infrastr- tures upon which many computer-based “intelligent” systems reside and inves- gates robustness on the hardware and software level, but also in larger environments such as the Internet and self-managing systems. The contributions in Part II target robustness in research areas that are inspired by biology, including brain-computer interfaces, biological networks, and biological immune systems, for example. Part III involves the exciting ?eld of arti?cial intelligence. The chapters here discuss the value of robustness as a general design principle for arti?cial intelligence, stressing its potential in areas such as humanoid robotics and image processing.
Download or read book Process Identification and PID Control written by Su Whan Sung and published by John Wiley & Sons. This book was released on 2009-07-23 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Identification and PID Control enables students and researchers to understand the basic concepts of feedback control, process identification, autotuning as well as design and implement feedback controllers, especially, PID controllers. The first The first two parts introduce the basics of process control and dynamics, analysis tools (Bode plot, Nyquist plot) to characterize the dynamics of the process, PID controllers and tuning, advanced control strategies which have been widely used in industry. Also, simple simulation techniques required for practical controller designs and research on process identification and autotuning are also included. Part 3 provides useful process identification methods in real industry. It includes several important identification algorithms to obtain frequency models or continuous-time/discrete-time transfer function models from the measured process input and output data sets. Part 4 introduces various relay feedback methods to activate the process effectively for process identification and controller autotuning. Combines the basics with recent research, helping novice to understand advanced topics Brings several industrially important topics together: Dynamics Process identification Controller tuning methods Written by a team of recognized experts in the area Includes all source codes and real-time simulated processes for self-practice Contains problems at the end of every chapter PowerPoint files with lecture notes available for instructor use
Download or read book PID Control for Industrial Processes written by Mohammad Shamsuzzoha and published by BoD – Books on Demand. This book was released on 2018-09-12 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: PID Control for Industrial Processes presents a clear, multidimensional representation of proportional - integral - derivative (PID) control for both students and specialists working in the area of PID control. It mainly focuses on the theory and application of PID control in industrial processes. It incorporates recent developments in PID control technology in industrial practice. Emphasis has been given to finding the best possible approach to develop a simple and optimal solution for industrial users. This book includes several chapters that cover a broad range of topics and priority has been given to subjects that cover real-world examples and case studies. The book is focused on approaches for controller tuning, i.e., method bases on open-loop plant tests and closed-loop experiments.
Download or read book Feedback Systems written by Karl Johan Åström and published by Princeton University Press. This book was released on 2021-02-02 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to the principles and applications of feedback systems—now fully revised and expanded This textbook covers the mathematics needed to model, analyze, and design feedback systems. Now more user-friendly than ever, this revised and expanded edition of Feedback Systems is a one-volume resource for students and researchers in mathematics and engineering. It has applications across a range of disciplines that utilize feedback in physical, biological, information, and economic systems. Karl Åström and Richard Murray use techniques from physics, computer science, and operations research to introduce control-oriented modeling. They begin with state space tools for analysis and design, including stability of solutions, Lyapunov functions, reachability, state feedback observability, and estimators. The matrix exponential plays a central role in the analysis of linear control systems, allowing a concise development of many of the key concepts for this class of models. Åström and Murray then develop and explain tools in the frequency domain, including transfer functions, Nyquist analysis, PID control, frequency domain design, and robustness. Features a new chapter on design principles and tools, illustrating the types of problems that can be solved using feedback Includes a new chapter on fundamental limits and new material on the Routh-Hurwitz criterion and root locus plots Provides exercises at the end of every chapter Comes with an electronic solutions manual An ideal textbook for undergraduate and graduate students Indispensable for researchers seeking a self-contained resource on control theory
Download or read book Automatic Tuning of PID Controllers written by Karl J. Åström and published by . This book was released on 1988 with total page 141 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Springer Handbook of Automation written by Shimon Y. Nof and published by Springer Nature. This book was released on 2023-06-16 with total page 1533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook incorporates new developments in automation. It also presents a widespread and well-structured conglomeration of new emerging application areas, such as medical systems and health, transportation, security and maintenance, service, construction and retail as well as production or logistics. The handbook is not only an ideal resource for automation experts but also for people new to this expanding field.
Download or read book Model Predictive Control in the Process Industry written by Eduardo F. Camacho and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Model Predictive Control is an important technique used in the process control industries. It has developed considerably in the last few years, because it is the most general way of posing the process control problem in the time domain. The Model Predictive Control formulation integrates optimal control, stochastic control, control of processes with dead time, multivariable control and future references. The finite control horizon makes it possible to handle constraints and non linear processes in general which are frequently found in industry. Focusing on implementation issues for Model Predictive Controllers in industry, it fills the gap between the empirical way practitioners use control algorithms and the sometimes abstractly formulated techniques developed by researchers. The text is firmly based on material from lectures given to senior undergraduate and graduate students and articles written by the authors.
Download or read book Decoupling Control written by Qing-Guo Wang and published by Springer. This book was released on 2003-07-01 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Decoupling or non-interactive control has attracted considerable research attention since the 1960s when control engineers started to deal with multivariable systems. The theory and design techniques for decoupling control have now, more or less matured for linear time-invariant systems, yet there is no single book which focuses on such an important topic. The present monograph fills this gap by presenting a fairly comprehensive and detailed treatment of decoupling theory and relevant design methods. Decoupling control under the framework of polynomial transfer function and frequency response settings, is included as well as the disturbance decoupling problem. The emphasis here is on special or relatively new compensation schemes such as (true and virtual) feedforward control and disturbance observers, rather than use of feedback control alone. The results are presented in a self-contained way and only the knowledge of basic linear systems theory is assumed of the reader.
