Download or read book Design of Rf Cmos Low Noise Amplifiers written by Changgui Lin and published by LAP Lambert Academic Publishing. This book was released on 2010-04 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of RF CMOS Low Noise Amplifiers presents the results of research on a gain-boosted common-gate RF low noise amplifier (LNA) in CMOS technology. The book covers noise analysis, design techniques, prototyping of the LNA, as well as broadband modeling for on-chip spiral differential inductors. Beginning with a technical review of LNA architectures and inductor modeling techniques, the authors then introduce a scalable lumped circuit model for octagonal differential inductors. The effect of high frequency current crowding, i.e. proximity effect, is taken into consideration in the lumped circuit model. Subsequently, the book offers comprehensive noise analysis of the LNA and discusses design techniques for noise reduction. Measurement results for a 2.4GHz CMOS LNA and conclusions are included. The book is intended for anyone who is interested in learning essentials of RF CMOS LNA design and basic mathematics of on-chip inductor broadband modeling. The book is also beneficial to engineers and researchers in CMOS RFIC design - especially for WLAN, Bluetooth, and emerging wireless communication applications.

Download or read book Design Automation of RF CMOS Low Noise Amplifiers written by Gülin Tulunay and published by . This book was released on 2007 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design of a Low voltage RF CMOS Low Noise Amplifier written by Sharifah Fatmadiana Wan Muhamad Hatta and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CMOS Low Noise Amplifiers for Single and Multiband Applications A Comprehensive Design Approach written by Norlaili Mohd Noh, Farshad Eshghabadi, Arjuna Marzuki and published by Penerbit USM. This book was released on 2023-10-11 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive knowledge, aimed at practicing integrated circuit design engineer or researcher, to learn and design a low noise amplifier (LNA) for single and multiband applications. The content is structured in a way so that even a beginner can follow the design method easily. This book features the following characteristics: different types of LNA designs (with key building blocks) are discussed, and detailed analysis is given for each LNA design, which covers from the fundamental and principal knowledge to the justification of the design approach. Detailed design approaches are using 180 nm and 130nm CMOS technologies, purposely presented in this manner to give exposure to the design of LNA under different technologies. The LNAs in this book are designed for GSM, WCDMA and WLAN standards, but the same method can be used for other frequencies of operation. Comprehensive analyses on the extreme or corner condition effects are highlighted. Besides, detailed derivation of equations relating to the parameters of the LNA’s performance metrics help LNA designers in understanding how the performance metrics of the LNA can be optimized to meet the desired specification. Electromagnetic analyses using Sonnet, an electromagnetic tool able to replace the conventional post-layout simulation with resistance and capacitance parasitic extraction for more accurate frequency performance prediction are presented. The electromagnetic method is proposed to be used in the LNA design as it can accurately predict the LNA’s performance before tape-out for first-pass fabrication. MATLAB codes are provided to generate important S-parameters and noise figure values.

Download or read book Design of Low Noise Amplifiers for Ultra Wideband Communications written by Roberto Díaz Ortega and published by McGraw Hill Professional. This book was released on 2014-01-13 with total page 129 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cutting-edge techniques for ultra-wideband, low-noise amplifier design This pioneering resource presents alternatives for implementing power- and area-efficient integrated low-noise amplifiers for ultra-wideband communications. Design methodologies for distributed amplifiers, feedback amplifiers, inductor structures with reduced area, and inductorless techniques are discussed. Cowritten by international experts in industry and academia, this book addresses the state of the art in integrated circuit design in the context of emerging systems. Design of Low-Noise Amplifiers for Ultra-Wideband Communications covers: Ultra-wideband overview and system approach Distributed amplifiers Wideband low-noise amplifiers Feedback wideband low-noise amplifiers Inductorless techniques

Download or read book Application in Rf Receivers of Cmos Low Noise Amplifiers and Front end Circuits Design and Implementation written by and published by . This book was released on 2009 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book RF CMOS Power Amplifiers Theory Design and Implementation written by Mona M. Hella and published by Springer Science & Business Media. This book was released on 2005-12-27 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: RF CMOS Power Amplifiers: Theory Design and Implementation focuses on the design procedure and the testing issues of CMOS RF power amplifiers. This is the first monograph addressing RF CMOS power amplifier design for emerging wireless standards. The focus on power amplifiers for short is distance wireless personal and local area networks (PAN and LAN), however the design techniques are also applicable to emerging wide area networks (WAN) infrastructure using micro or pico cell networks. The book discusses CMOS power amplifier design principles and theory and describes the architectures and tardeoffs in designing linear and nonlinear power amplifiers. It then details design examples of RF CMOS power amplifiers for short distance wireless applications (e, g., Bluetooth, WLAN) including designs for multi-standard platforms. Design aspects of RF circuits in deep submicron CMOS are also discussed. RF CMOS Power Amplifiers: Theory Design and Implementation serves as a reference for RF IC design engineers and RD and R&D managers in industry, and for graduate students conducting research in wireless semiconductor IC design in general and with CMOS technology in particular.

Download or read book Millimeter Wave Low Noise Amplifiers written by Mladen Božanić and published by Springer. This book was released on 2017-11-30 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the first standalone book that combines research into low-noise amplifiers (LNAs) with research into millimeter-wave circuits. In compiling this book, the authors have set two research objectives. The first is to bring together the research context behind millimeter-wave circuit operation and the theory of low-noise amplification. The second is to present new research in this multi-disciplinary field by dividing the common LNA configurations and typical specifications into subsystems, which are then optimized separately to suggest improvements in the current state-of-the-art designs. To achieve the second research objective, the state-of-the-art LNA configurations are discussed and the weaknesses of state-of the art configurations are considered, thus identifying research gaps. Such research gaps, among others, point towards optimization – at a systems and microelectronics level. Optimization topics include the influence of short wavelength, layout and crosstalk on LNA performance. Advanced fabrication technologies used to decrease the parasitics of passive and active devices are also explored, together with packaging technologies such as silicon-on-chip and silicon-on-package, which are proposed as alternatives to traditional IC implementation. This research outcome builds through innovation. Innovative ideas for LNA construction are explored, and alternative design methodologies are deployed, including LNA/antenna co-design or utilization of the electronic design automation in the research flow. The book also offers the authors’ proposal for streamlined automated LNA design flow, which focuses on LNA as a collection of highly optimized subsystems.

Download or read book High Linearity CMOS RF Front End Circuits written by Yongwang Ding and published by Springer Science & Business Media. This book was released on 2006-02-08 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on high performance radio frequency integrated circuits (RF IC) design in CMOS. 1. Development of radio frequency ICs Wireless communications has been advancing rapidly in the past two decades. Many high performance systems have been developed, such as cellular systems (AMPS, GSM, TDMA, CDMA, W-CDMA, etc. ), GPS system (global po- tioning system) and WLAN (wireless local area network) systems. The rapid growth of VLSI technology in both digital circuits and analog circuits provides benefits for wireless communication systems. Twenty years ago not many p- ple could imagine millions of transistors in a single chip or a complete radio for size of a penny. Now not only complete radios have been put in a single chip, but also more and more functions have been realized by a single chip and at a much lower price. A radio transmits and receives electro-magnetic signals through the air. The signals are usually transmitted on high frequency carriers. For example, a t- ical voice signal requires only 30 Kilohertz bandwidth. When it is transmitted by a FM radio station, it is often carried by a frequency in the range of tens of megahertz to hundreds of megahertz. Usually a radio is categorized by its carrier frequency, such as 900 MHz radio or 5 GHz radio. In general, the higher the carrier frequency, the better the directivity, but the more difficult the radio design.

Download or read book CMOS Low Noise Amplifier Design Utilizing Monolithic Transformers written by Jianjun J. Zhou and published by . This book was released on 1998 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Full integration of CMOS low noise amplifiers (LNA) presents a challenge for low cost CMOS receiver systems. A critical problem faced in the design of an RF CMOS LNA is the inaccurate high-frequency noise model of the MOSFET implemented in circuit simulators such as SPICE. Silicon-based monolithic inductors are another bottleneck in RF CMOS design due to their poor quality factor. In this thesis, a CMOS implementation of a fully-integrated differential LNA is presented. A small-signal noise circuit model that includes the two most important noise sources of the MOSFET at radio frequencies, channel thermal noise and induced gate current noise, is developed for CMOS LNA analysis and simulation. Various CMOS LNA architectures are investigated. The optimization techniques and design guidelines and procedures for an LC tuned CMOS LNA are also described. Analysis and modeling of silicon-based monolithic inductors and transformers are presented and it is shown that in fully-differential applications, a monolithic transformer occupies less die area and achieves a higher quality factor compared to two independent inductors with the same total effective inductance. It is also shown that monolithic transformers improve the common-mode rejection of the differential circuits.

Download or read book Design of Radio Frequency CMOS Low Noise Amplifier written by Xiaoyun Liu and published by . This book was released on 2002 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Design of CMOS Radio Frequency Integrated Circuits written by Thomas H. Lee and published by Cambridge University Press. This book was released on 2004 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, first published in 2004, is an expanded and revised edition of Tom Lee's acclaimed RFIC text.

Download or read book Design of CMOS RF Low noise Amplifiers and Mixer for Wireless Applications written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Xiii, 161 leaves : ill. ; 30 cm.

Download or read book The Design of CMOS Radio Frequency Integrated Circuits written by Thomas H. Lee and published by Cambridge University Press. This book was released on 2003-12-22 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, first published in 2004, is an expanded and thoroughly revised edition of Tom Lee's acclaimed guide to the design of gigahertz RF integrated circuits. A new chapter on the principles of wireless systems provides a bridge between system and circuit issues. The chapters on low-noise amplifiers, oscillators and phase noise have been significantly expanded. The chapter on architectures now contains several examples of complete chip designs, including a GPS receiver and a wireless LAN transceiver, that bring together the theoretical and practical elements involved in producing a prototype chip. Every section has been revised and updated with findings in the field and the book is packed with physical insights and design tips, and includes a historical overview that sets the whole field in context. With hundreds of circuit diagrams and homework problems this is an ideal textbook for students taking courses on RF design and a valuable reference for practising engineers.

Download or read book Design of CMOS RF Integrated Circuits and Systems written by Kiat Seng Yeo and published by World Scientific. This book was released on 2010 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the most comprehensive and in-depth coverage of the latest circuit design developments in RF CMOS technology. It is a practical and cutting-edge guide, packed with proven circuit techniques and innovative design methodologies for solving challenging problems associated with RF integrated circuits and systems. This invaluable resource features a collection of the finest design practices that may soon drive the system-on-chip revolution. Using this book's state-of-the-art design techniques, one can apply existing technologies in novel ways and to create new circuit designs for the future.

Download or read book Advances in Analog and RF IC Design for Wireless Communication Systems written by Domine Leenaerts and published by Elsevier Inc. Chapters. This book was released on 2013-05-13 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radios for cellular wireless infrastructure require low-noise amplifiers (LNAs) with very demanding requirements on noise and linearity performance. So far these amplifiers have been realized in III-V technologies, but for various reasons silicon-based LNAs are needed too. This chapter will explain the challenges in LNA design for this application field.

Download or read book Design of an RF Wideband Low noise Amplifier Using 0 35uM CMOS Technology written by Yan Tang and published by . This book was released on 2002 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: