Download or read book Design of post installed and cast in fastenings in concrete written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of post installed and cast in fastenings for use in concrete written by and published by . This book was released on with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of anchorages in concrete written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2011-01-01 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite the widespread use of cast-in-place and post-installed anchors in construction, the overall level of understanding in the engineering community regarding their behaviour remains quite limited. Furthermore, since the publication of the original CEB design guide, “Design of Fastenings in Concrete”, ongoing research and additional application experience has led to an improved understanding and deepened knowledge in various areas of fastening technology. fib Bulletin 58 therefore represents a substantial revision of the original 1997 guide. It addresses a variety of loading types and failure modes and takes into account the current state of the art for anchorages in new construction as well as for their use in the repair and strengthening of existing concrete structures. fib Bulletin 58 provides a method for the design of the anchorage and additional rules for the design of the concrete member to which the load is transferred. The specified provisions are based on the currently available research.
Download or read book Design of fastenings in concrete draft CEB guide part 1 to 3 fastenings for seismic retrofitting state of the art report on design and application written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1995-08-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anchorage in Concrete Construction written by Rolf Eligehausen and published by John Wiley & Sons. This book was released on 2013-10-30 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Das Buch stellt den aktuellen Stand der kompletten Befestigungstechnik für Beton und Mauerwerk mit Einlegeteilen (Ankerschienen, Kopfbolzen), Dübeln (Metallspreizdübel, Hinterschnittdübel, Verbunddübel, Betonschrauben, Kunststoffdübel) und Setzbolzen umfassend dar. Die Befestigungselemente und ihre Wirkungsmechanismen werden ausführlich beschrieben und das Tragverhalten im ungerissenen und gerissenen Beton untersucht. Weiterhin werden das Korrosionsverhalten, das Verhalten bei Brandbeanspruchung sowie bei Erdbeben- und Schockbeanspruchung behandelt. Von besonderer internationaler Aktualität ist die Bemessung gemäß der europäischen und amerikanischen Normung. Praxisorientierte Kriterien zur Auswahl von Befestigungsmitteln und Bemessungsbeispiele runden das Werk zu einem einzigartigen Handbuch ab.
Download or read book Design of Fastenings for Use in Concrete written by Rainer Mallée and published by John Wiley & Sons. This book was released on 2013-04-05 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European pre-standard CEN/TS 1992-4 for the design of fastenings by means of headed studs, anchor channels as well as post-installed mechanical and chemical anchors is ready for use. The background and interpretation of the provisions related to the determination of actions and resistances based on limit state design, durability, fire resistance, fatigue and earthquake actions as required by CEN/TS 1992 are described in detail. Selected chapters from the German concrete yearbook are now being published in the new English "Beton-Kalender Series" for the benefit of an international audience. Since it was founded in 1906, the Ernst & Sohn "Beton-Kalender" has been supporting developments in reinforced and prestressed concrete. The aim was to publish a yearbook to reflect progress in "ferro-concrete" structures until - as the book's first editor, Fritz von Emperger (1862-1942), expressed it - the "tempestuous development" in this form of construction came to an end. However, the "Beton-Kalender" quickly became the chosen work of reference for civil and structural engineers, and apart from the years 1945-1950 has been published annually ever since.
Download or read book Fastenings to Concrete and Masonry Structures written by Comité euro-international du béton and published by Thomas Telford. This book was released on 1994 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern fastening techniques are increasingly being used to transfer loads into concrete and masonry structures. This book aims to compile and compare research on the behaviour of fastening systems. It also proposes an approach to the design of fastenings based on empirical and theoretical models.
Download or read book Design of Fastenings for Use in Concrete written by British Standards Institute Staff and published by . This book was released on 2009-06-30 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concretes, Structures, Fasteners, Structural systems, Structural design, Loading, Failure (mechanical), Strength of materials, Verification, Plastic analysis, Bonding, Adhesives
Download or read book Design of Fastenings for Use in Concrete Post Installed Fasteners Mechanical Systems written by British Standards Institute Staff and published by . This book was released on 2009-06-30 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concretes, Structures, Fasteners, Structural systems, Structural design, Loading, Failure (mechanical), Strength of materials, Verification, Plastic analysis
Download or read book Mechanics of Structures and Materials XXIV written by Hong Hao and published by CRC Press. This book was released on 2019-08-08 with total page 1966 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanics of Structures and Materials: Advancements and Challenges is a collection of peer-reviewed papers presented at the 24th Australasian Conference on the Mechanics of Structures and Materials (ACMSM24, Curtin University, Perth, Western Australia, 6-9 December 2016). The contributions from academics, researchers and practising engineers from Australasian, Asia-pacific region and around the world, cover a wide range of topics, including: • Structural mechanics • Computational mechanics • Reinforced and prestressed concrete structures • Steel structures • Composite structures • Civil engineering materials • Fire engineering • Coastal and offshore structures • Dynamic analysis of structures • Structural health monitoring and damage identification • Structural reliability analysis and design • Structural optimization • Fracture and damage mechanics • Soil mechanics and foundation engineering • Pavement materials and technology • Shock and impact loading • Earthquake loading • Traffic and other man-made loadings • Wave and wind loading • Thermal effects • Design codes Mechanics of Structures and Materials: Advancements and Challenges will be of interest to academics and professionals involved in Structural Engineering and Materials Science.
Download or read book Connections Between Steel and Concrete written by R. Eligehausen and published by RILEM Publications. This book was released on 2001 with total page 736 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Fastenings for Use in Concrete Plastic Design of Fastenings with Headed and Post Installed Fasteners written by British Standards Institute Staff and published by . This book was released on 1918-10-04 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastic analysis, Concretes, Structures, Structural design, Verification, Bolts, Fasteners, Screws (bolts), Failure (mechanical), Structural systems, Loading, Strength of materials
Download or read book Design Solutions and Innovations in Temporary Structures written by Beale, Robert and published by IGI Global. This book was released on 2017-02-07 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: Temporary structures are a vital but often overlooked component in the success of any construction project. With the assistance of modern technology, design and operation procedures in this area have undergone significant enhancements in recent years. Design Solutions and Innovations in Temporary Structures is a comprehensive source of academic research on the latest methods, practices, and analyses for effective and safe temporary structures. Including perspectives on numerous relevant topics, such as safety considerations, quality management, and structural analysis, this book is ideally designed for engineers, professionals, academics, researchers, and practitioners actively involved in the construction industry.
Download or read book Fastenings for Seismic Retrofitting written by Comité euro-international du béton and published by Thomas Telford. This book was released on 1997 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: The economic consequences and loss of life make earthquake disasters catastrophic anywhere in the world. Seismic retrofitting, or repair, of buildings is an essential component for mitigating the effects of earthquakes. This state-of-the-art report reviews and introduces the latest design concepts and methods for seismic retrofitting throughout the world, with emphasis on the use of fastening systems.
Download or read book Proceedings of the 26th Australasian Conference on the Mechanics of Structures and Materials written by Nawawi Chouw and published by Springer Nature. This book was released on with total page 941 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structures and Architecture Bridging the Gap and Crossing Borders written by Paulo J.S. Cruz and published by CRC Press. This book was released on 2019-07-08 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structures and Architecture – Bridging the Gap and Crossing Borders contains the lectures and papers presented at the Fourth International Conference on Structures and Architecture (ICSA2019) that was held in Lisbon, Portugal, in July 2019. It also contains a multimedia device with the full texts of the lectures presented at the conference, including the 5 keynote lectures, and almost 150 selected contributions. The contributions on creative and scientific aspects in the conception and construction of structures, on advanced technologies and on complex architectural and structural applications represent a fine blend of scientific, technical and practical novelties in both fields. ICSA2019 covered all major aspects of structures and architecture, including: building envelopes/façades; comprehension of complex forms; computer and experimental methods; futuristic structures; concrete and masonry structures; educating architects and structural engineers; emerging technologies; glass structures; innovative architectural and structural design; lightweight and membrane structures; special structures; steel and composite structures; structural design challenges; tall buildings; the borderline between architecture and structural engineering; the history of the relationship between architects and structural engineers; the tectonic of architectural solutions; the use of new materials; timber structures, among others. This set of book and multimedia device is intended for a global readership of researchers and practitioners, including architects, structural and construction engineers, builders and building consultants, constructors, material suppliers and product manufacturers, and other professionals involved in the design and realization of architectural, structural and infrastructural projects.
Download or read book Connections between Steel and Concrete written by Rolf Eligehausen and published by ibidem-Verlag / ibidem Press. This book was released on 2012-02-27 with total page 1430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anchorage by fasteners and composite structures of steel and concrete have seen dramatic progress in research, technology and application over the past decades. The understanding of the fundamental principles underlying both disciplines has significantly improved. Concurrently, there has been rapid growth in the development of sophisticated new products and the establishment of international directives and codes to ensure their safe and economical use in a wide range of engineered structures. Although they deal with very similar problems, the two disciplines have developed independently from each other. To optimize the use of composite structures and fastenings to concrete, however, it is necessary to have knowledge of both: the local behavior of the fastening system and the global behavior of the structure. It became apparent that a forum offering the opportunity to expand and to exchange experience in the field of connecting steel and concrete would benefit all involved. Furthermore this forum would aid in the rapid dissemination of new ideas, technologies and solutions as well as explore new areas of research.This book forms the Proceedings of the 2 Symposium on “Connections between Steel and Concrete”. As the 1 Symposium in 2001 it brought together leading experts from all facets of the research, design, construction and anchor manufacturing community from around the world. Their lectures covered the topics:- test methods- behavior and design- dynamic loading: shock, earthquake, fatigue- durability- exceptional applications, strenghtening and structures- related topicsIn total 129 papers are gathered in these 2 volumes.
