Download or read book Design of Piezo Inkjet Print Heads written by J. Frits Dijksman and published by John Wiley & Sons. This book was released on 2019-02-11 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: An integral overview of the theory and design of printheads, authored by an expert with over 30 years' experience in the field of inkjet printing. Clearly structured, the book presents the design of a printhead in a comprehensive and clear form, right from the start. To begin with, the working principle of piezo-driven drop-on-demand printheads in theory is discussed, building on the theory of mechanical vibrations and acoustics. Then the design of single-nozzle as well as multi-nozzle printheads is presented, including the importance of various parameters that need to be optimized, such as viscosity, surface tension and nozzle shape. Topics such as refilling the nozzle and the impact of the droplet on the surface are equally treated. The text concludes with a unique set of worked-out questions for training purposes as well as case studies and a look at what the future holds. An essential reference for beginning as well as experienced researchers, from ink developers to mechanical engineers, both in industry and academia.

Download or read book Handbook of Industrial Inkjet Printing written by Werner Zapka and published by John Wiley & Sons. This book was released on 2018-01-03 with total page 946 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unique in its integration of individual topics to achieve a full-system approach, this book addresses all the aspects essential for industrial inkjet printing. After an introduction listing the industrial printing techniques available, the text goes on to discuss individual topics, such as ink, printheads and substrates, followed by metrology techniques that are required for reliable systems. Three iteration cycles are then described, including the adaptation of the ink to the printhead, the optimization of the ink to the substrate and the integration of machine manufacturing, monitoring, and data handling, among others. Finally, the book summarizes a number of case studies and success stories from selected areas, including graphics, printed electronics, and 3D printing as well a list of ink suppliers, printhead manufacturers and integrators. Practical hints are included throughout for a direct hands-on experience. Invaluable for industrial users and academics, whether ink developers or mechanical engineers, and working in areas ranging from metrology to intellectual property.

Download or read book HWM written by and published by . This book was released on 2001-05 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: Singapore's leading tech magazine gives its readers the power to decide with its informative articles and in-depth reviews.

Download or read book Digital Textile Printing written by Hua Wang and published by Elsevier. This book was released on 2023-07-10 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Textile Printing: Science, Technology and Markets integrates the latest advances in the technology, management and design of digital textile printing. Ongoing improvements in digital technology have driven a high rate of innovation in this sector, and this book draws on the latest advances from industry and academia to bring the reader fully up-to-date. The theoretical and practical aspects of the subject are addressed across the supply chain. In addition to the latest digital methods, the book also provides the latest advice on inks, their rheology, their affinity to different fibers, and their shelf-life. This collection also explores emerging applications in this sector, pointing the way for future developments in textile printing. Explains the basics of digital image design and data encoding Provides technical details on all common types of digital printing machines Addresses common barriers to the implementation of digital printing technology

Download or read book Printing on Polymers written by Joanna Izdebska and published by William Andrew. This book was released on 2015-09-24 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Printing on Polymers: Fundamentals and Applications is the first authoritative reference covering the most important developments in the field of printing on polymers, their composites, nanocomposites, and gels. The book examines the current state-of-the-art and new challenges in the formulation of inks, surface activation of polymer surfaces, and various methods of printing. The book equips engineers and materials scientists with the tools required to select the correct method, assess the quality of the result, reduce costs, and keep up-to-date with regulations and environmental concerns. Choosing the correct way of decorating a particular polymer is an important part of the production process. Although printing on polymeric substrates can have desired positive effects, there can be problems associated with various decorating techniques. Physical, chemical, and thermal interactions can cause problems, such as cracking, peeling, or dulling. Safety, environmental sustainability, and cost are also significant factors which need to be considered. With contributions from leading researchers from industry, academia, and private research institutions, this book serves as a one-stop reference for this field—from print ink manufacture to polymer surface modification and characterization; and from printing methods to applications and end-of-life issues. Enables engineers to select the correct decoration method for each material and application, assess print quality, and reduce costs Increases familiarity with the terminology, tests, processes, techniques, and regulations of printing on plastic, which reduces the risk of adverse reactions, such as cracking, peeling, or dulling of the print Addresses the issues of environmental impact and cost when printing on polymeric substrates Features contributions from leading researchers from industry, academia, and private research institutions

Download or read book Inkjet Printing in Industry written by Werner Zapka and published by John Wiley & Sons. This book was released on 2022-08-22 with total page 1718 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides an indispensable overview of all essential aspects of industrial-scale inkjet printing. Inkjet printing, as a scalable deposition technique, has grown in popularity due to its being additive, digital, and contact-free. Given these advantages, the technology can now be used in stable and mature industrial-scale applications. As the mechanisms for inkjet printing have improved, so too have the versatility and applicability of this machinery within industry. The handbook's coverage includes inks, printhead technology, substrates, metrology, software, as well as machine integration and pre- and post-processing approaches. This information is complemented by an overview of printing strategies and application development and covers technological advances in packaging, security printing, printed electronics, robotics, 3D printing, and bioprinting. Important topics like standardisation, regulatory requirements, ecological aspects, and patents. Readers will find: The most comprehensive work on the topic with over 75 chapters and more than 1,500 pages relating to inkjet printing technology The inkjet-printing expertise of corporate development engineers and academic researchers in one manual A hands-on approach utilizing case studies, success stories, and practical hints that allow the reader direct, first-hand experience with the power of inkjet printing technology. The ideal resource for material scientists, engineering scientists in industry, electronic engineers, and surface and solid-state chemists,Inkjet Printing in Industry is an all-in-one tool for modern professionals and researchers alike.

Download or read book Ultrasonic Transducer Materials written by O. E. Mattiat and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 194 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years remarkable progress has been made in the development of materials for ultrasonic transducers. There is a continuing trend towards increasingly higher frequency ranges for the application of ultrasonic trans ducers in modern technology. The progress in this area has been especially rapid and articles and papers on the subject are scattered over numerous technical and scientific journals in this country and abroad. Although good books have appeared on ultrasonics in general and ultrasonic transducers in particular in which, for obvious reasons, materials play an important part, no comprehensive treatise is available that represents the state-of-the-art on modern ultrasonic transducer materials. This book intends to fill a need for a thorough review of the subject. Not all materials are covered of which, theoretically, ultrasonic trans ducers could be made but those that are or may be of technical impor tance and which have inherent electro acoustic transducer properties, i.e., materials that are either magnetostrictive, electrostrictive, or piezoelectric. The book has been devided into three parts which somewhat reflect the historic development of ultrasonic transducer materials for important tech nical application. Chapter 1 deals with magnetostrictive materials, magnetostrictive met als and their alloys, and magnetostrictive ferrites (polycrystalline ceramics). The metals are useful especially in cases where ruggednes of the transducers are of overriding importance and in the lower ultrasonic frequency range.

Download or read book Smart and Connected Wearable Electronics written by Woon-Hong Yeo and published by Elsevier. This book was released on 2023-11-13 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: Approx.630 pages Approx.630 pages

Download or read book Inkjet Technology for Digital Fabrication written by Ian M. Hutchings and published by John Wiley & Sons. This book was released on 2012-11-09 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whilst inkjet technology is well-established on home and small office desktops and is now having increasing impact in commercial printing, it can also be used to deposit materials other than ink as individual droplets at a microscopic scale. This allows metals, ceramics, polymers and biological materials (including living cells) to be patterned on to substrates under precise digital control. This approach offers huge potential advantages for manufacturing, since inkjet methods can be used to generate structures and functions which cannot be attained in other ways. Beginning with an overview of the fundamentals, this bookcovers the key components, for example piezoelectric print-heads and fluids for inkjet printing, and the processes involved. It goes on to describe specific applications, e.g. MEMS, printed circuits, active and passive electronics, biopolymers and living cells, and additive manufacturing. Detailed case studies are included on flat-panel OLED displays, RFID (radio-frequency identification) manufacturing and tissue engineering, while a comprehensive examination of the current technologies and future directions of inkjet technology completes the coverage. With contributions from both academic researchers and leading names in the industry, Inkjet Technology for Digital Fabrication is a comprehensive resource for technical development engineers, researchers and students in inkjet technology and system development, and will also appeal to researchers in chemistry, physics, engineering, materials science and electronics.

Download or read book Prandtl s Essentials of Fluid Mechanics written by Herbert Oertel and published by Springer Science & Business Media. This book was released on 2006-04-18 with total page 731 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an update and extension of the classic textbook by Ludwig Prandtl, Essentials of Fluid Mechanics. It is based on the 10th German edition with additional material included. Chapters on wing aerodynamics, heat transfer, and layered flows have been revised and extended, and there are new chapters on fluid mechanical instabilities and biomedical fluid mechanics. References to the literature have been kept to a minimum, and the extensive historical citations may be found by referring to previous editions. This book is aimed at science and engineering students who wish to attain an overview of the various branches of fluid mechanics. It will also be useful as a reference for researchers working in the field of fluid mechanics.

Download or read book Fundamentals of Inkjet Printing written by Stephen D. Hoath and published by John Wiley & Sons. This book was released on 2016-03-14 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: From droplet formation to final applications, this practical book presents the subject in a comprehensive and clear form, using only content derived from the latest published results. Starting at the very beginning, the topic of fluid mechanics is explained, allowing for a suitable regime for printing inks to subsequently be selected. There then follows a discussion on different print-head types and how to form droplets, covering the behavior of droplets in flight and upon impact with the substrate, as well as the droplet's wetting and drying behavior at the substrate. Commonly observed effects, such as the coffee ring effect, are included as well as printing in the third dimension. The book concludes with a look at what the future holds. As a unique feature, worked examples both at the practical and simulation level, as well as case studies are included. As a result, students and engineers in R&D will come to fully understand the complete process of inkjet printing.

Download or read book Inkjet Technology for Digital Fabrication written by Ian M. Hutchings and published by John Wiley & Sons. This book was released on 2012-12-26 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whilst inkjet technology is well-established on home and small office desktops and is now having increasing impact in commercial printing, it can also be used to deposit materials other than ink as individual droplets at a microscopic scale. This allows metals, ceramics, polymers and biological materials (including living cells) to be patterned on to substrates under precise digital control. This approach offers huge potential advantages for manufacturing, since inkjet methods can be used to generate structures and functions which cannot be attained in other ways. Beginning with an overview of the fundamentals, this bookcovers the key components, for example piezoelectric print-heads and fluids for inkjet printing, and the processes involved. It goes on to describe specific applications, e.g. MEMS, printed circuits, active and passive electronics, biopolymers and living cells, and additive manufacturing. Detailed case studies are included on flat-panel OLED displays, RFID (radio-frequency identification) manufacturing and tissue engineering, while a comprehensive examination of the current technologies and future directions of inkjet technology completes the coverage. With contributions from both academic researchers and leading names in the industry, Inkjet Technology for Digital Fabrication is a comprehensive resource for technical development engineers, researchers and students in inkjet technology and system development, and will also appeal to researchers in chemistry, physics, engineering, materials science and electronics.

Download or read book MicroMechatronics Second Edition written by Kenji Uchino and published by CRC Press. This book was released on 2019-07-19 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: After Uchino’s introduction of a new terminology, ‘Micromechatronics’ in 1979 for describing the application area of ‘piezoelectric actuators’, the rapid advances in semiconductor chip technology have led to a new terminology MEMS (micro-electro-mechanical-system) or even NEMS (nano-electro-mechanicalsystem) to describe mainly thin film sensor/actuator devices, a narrower area of micromechatronics coverage. New technologies, product developments and commercialization are providing the necessity of this major revision. In particular, the progresses in high power transducers, loss mechanisms in smart materials, energy harvesting and computer simulations are significant. New technologies, product developments and commercialization are providing the updating requirement for the book contents, in parallel to the deletion of old contents. Various educational/instructional example problems have been accumulated, which were integrated in the new edition in order to facilitate the self-learning for the students, and the quiz/problem creation for the instructors. Heavily revised topics from the previous edition include: high power transducers, loss mechanisms in smart materials, energy harvesting and computer simulations New technologies, product developments and commercialization helped shape the updated contents of this book where all chapters have been updated and revised. This textbook is intended for graduate students and industrial engineers studying or working in the fields of electronic materials, control system engineering, optical communications, precision machinery, and robotics. The text is designed primarily for a graduate course with the equivalent of thirty 75-minute lectures; however, it is also suitable for self-study by individuals wishing to extend their knowledge in the field.

Download or read book 3D 4D Printing Methods for Pharmaceutical Manufacturing and Personalised Drug Delivery written by Dimitrios Lamprou and published by Springer Nature. This book was released on 2023-08-04 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: New materials and manufacturing techniques are emerging with potential to address the challenges associated with the manufacture of pharmaceutical systems that will teach new tricks to old drugs. 3D printing (3DP) is a technique that can used for the manufacturing of dosage forms, and especially targeting paediatric and geriatric formulations, as permits the fabrication of high degrees of complexity with great reproducibility, in a fast and cost-effective fashion, and offers a new paradigm for the direct manufacture of personalised dosage forms. The book is covering the basics behind each additive manufacturing (AM) method, current applications in pharmaceutics for each 3DP method, and case studies (examples) from a teaching perspective, targeting undergraduate (UG) and postgraduate (PG) students. A unique to this book is the integration of studies based upon the use of different AM technologies, which designed to reinforce importance printing parameters and material considerations. The book includes case studies or multiple-choice questions (MCQs), which allow application of the content in a flipped-classroom.

Download or read book Smart Biosensor Technology written by George K. Knopf and published by CRC Press. This book was released on 2018-11-15 with total page 577 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the success of the first edition, this second edition continues to build upon fundamental principles of biosensor design and incorporates recent advances in intelligent materials and novel fabrication techniques for a broad range of real world applications. The book provides a multi-disciplinary focus to capture the ever-expanding field of biosensors. Smart Biosensor Technology, Second Edition includes contributions from leading specialists in a wide variety of fields with a common focus on smart biosensor design. With 21 chapters organized in five parts, this compendium covers the fundamentals of smart biosensor technology, important issues related to material design and selection, principles of biosensor design and fabrication, advances in bioelectronics, and a look at specific applications related to pathogen detection, toxicity monitoring, microfluidics and healthcare. Features Provides a solid background in the underlying principles of biosensor design and breakthrough technologies for creating more intelligent biosensors Focusses on material design and selection including cutting-edge developments in carbon nanotubes, polymer nanowires, and porous silicon Examines machine learning and introduces concepts such as DNA-based molecular computing for smart biosensor function Explores the principles of bioelectronics and nerve cell microelectrode arrays for creating novel transducers and physiological biosensors Devotes several chapters to biosensors developed to detect and monitor a variety of toxins and pathogens Offers expert opinions on the future directions, challenges and opportunities in the field

Download or read book Inkjet based Micromanufacturing written by Oliver Brand and published by John Wiley & Sons. This book was released on 2012-04-16 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Inkjet-based Micromanufacturing Inkjet technology goes way beyond putting ink on paper: it enables simpler, faster and more reliable manufacturing processes in the fields of micro- and nanotechnology. Modern inkjet heads are per se precision instruments that deposit droplets of fluids on a variety of surfaces in programmable, repeating patterns, allowing, after suitable modifications and adaptations, the manufacturing of devices such as thin-film transistors, polymer-based displays and photovoltaic elements. Moreover, inkjet technology facilitates the large-scale production of flexible RFID transponders needed, eg, for automated logistics and miniaturized sensors for applications in health surveillance. The book gives an introduction to inkjet-based micromanufacturing, followed by an overview of the underlying theories and models, which provides the basis for a full understanding and a successful usage of inkjet-based methods in current microsystems research and development Overview of Inkjet-based Micromanufacturing: Thermal Inkjet Theory and Modeling Post-Printing Processes for Inorganic Inks for Plastic Electronics Applications Inkjet Ink Formulations Inkjet Fabrication of Printed Circuit Boards Antennas for Radio Frequency Identification Tags Inkjet Printing for MEMS

Download or read book The Chemistry of Inkjet Inks written by and published by . This book was released on with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: