Download or read book Design of Low rise Reinforced Concrete Buildings written by David Anthony Fanella and published by International Code Council. This book was released on 2009-01-01 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Detailing of Low Rise Reinforced Concrete Buildings written by and published by . This book was released on 2017-02-10 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Structural Design of Low Rise Buildings in Cold Formed Steel Reinforced Masonry and Structural Timber written by J. R. Ubejd Mujagic and published by McGraw Hill Professional. This book was released on 2012-04-02 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: A concise guide to the structural design of low-rise buildings in cold-formed steel, reinforced masonry, and structural timber This practical reference discusses the types of low-rise building structural systems, outlines the design process, and explains how to determine structural loadings and load paths pertinent to low-rise buildings. Characteristics and properties of materials used in the construction of cold-formed steel, reinforced masonry, and structural timber buildings are described along with design requirements. The book also provides an overview of noncomposite and composite open-web joist floor systems. Design code requirements referenced by the 2009 International Building Code are used throughout. This is an ideal resource for structural engineering students, professionals, and those preparing for licensing examinations. Structural Design of Low-Rise Buildings in Cold-Formed Steel, Reinforced Masonry, and Structural Timber covers: Low-rise building systems Loads and load paths in low-rise buildings Design of cold-formed steel structures Structural design of reinforced masonry Design of structural timber Structural design with open-web joists
Download or read book Guidelines for Design of Low Rise Buildings Subjected to Lateral Forces written by Ajaya Kumar Gupta and published by CRC Press. This book was released on 2020-11-25 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Design of Low-Rise Buildings Subjected to Lateral Forces is a concise guide that identifies performance issues, concerns, and research needs associated with low-rise buildings. The book begins with an introduction that discusses special problems with low-rise buildings subjected to wind and earthquakes. Chapter 2 examines probabilistic methods and their use in evaluating risks from natural hazards. It also addresses the characteristics of wind and seismic forces and levels of risk implied by building codes. Wind forces are covered in more detail in Chapter 3, with discussions of wind force concepts and wind-structure interactions. Chapter 4 is devoted to earthquake forces and traces the development of building codes for earthquake resistant design. Chapter 5 describes the main framing systems used to resist lateral forces and discusses the code requirements for drift control. The designs and requirements for connections between building elements are addressed in Chapter 6. It includes examples along with several illustrations of suitable connections. The performance of non-structural elements during wind and earthquake forces is also examined in detail. This book serves as an important reference for civil engineers, construction engineers, architects, and anyone concerned with structural codes and standards. It is an excellent guide that can be used to supplement design recommendations and provide a design basis where there are no current requirements.
Download or read book Reinforced Concrete Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2009-12-14 with total page 1024 pages. Available in PDF, EPUB and Kindle. Book excerpt: An exploration of the world of concrete as it applies to the construction of buildings, Reinforced Concrete Design of Tall Buildings provides a practical perspective on all aspects of reinforced concrete used in the design of structures, with particular focus on tall and ultra-tall buildings. Written by Dr. Bungale S. Taranath, this work explains t
Download or read book Design of Low rise Concrete Buildings for Earthquake Forces written by David Anthony Fanella and published by . This book was released on 1998 with total page 173 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Examples of the Design of Reinforced Concrete Buildings to BS8110 written by C.E. Reynolds and published by CRC Press. This book was released on 2017-12-21 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest edition of this well-known book makes available to structural design engineers a wealth of practical advice on effective design of concrete structures. It covers the complete range of concrete elements and includes numerous data sheets, charts and examples to help the designer. It is fully updated in line with the relevant British Standards and Codes of Practice.
Download or read book Reinforced Concrete Buildings written by Ernest Leslie Ransome and published by . This book was released on 1912 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Practical Design of Reinforced Concrete Buildings written by Syed Mehdi Ashraf and published by CRC Press. This book was released on 2017-11-10 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will provide comprehensive, practical knowledge for the design of reinforced concrete buildings. The approach will be unique as it will focus primarily on the design of various structures and structural elements as done in design offices with an emphasis on compliance with the relevant codes. It will give an overview of the integrated design of buildings and explain the design of various elements such as slabs, beams, columns, walls, and footings. It will be written in easy-to-use format and refer to all the latest relevant American codes of practice (IBC and ASCE) at every stage. The book will compel users to think critically to enhance their intuitive design capabilities.
Download or read book Analysis and Design of High rise Concrete Buildings written by Jaime Moreno and published by . This book was released on 1985 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Wind and Earthquake Resistant Reinforced Concrete Buildings written by Somnath Ghosh and published by CRC Press. This book was released on 2021-06-14 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Wind and Earthquake Resistant Reinforced Concrete Buildings explains wind and seismic design issues of RCC buildings in brief and provides design examples based on recommendations of latest IS codes essential for industrial design. Intricate issues of RCC design are discussed which are supplemented by real-life examples. Guidelines are presented for evaluating the acceptability of wind-induced motions of tall buildings. Design methodologies for structures to deform well beyond their elastic limits, which is essential under seismic excitation, have been discussed in detail. Comparative discussion including typical design examples using recent British, Euro and American codes is also included. Features: Explains wind and earthquake resistant design issues, balancing theoretical aspects and design implications, in detail Discusses issues for designing the wind and earthquake resistant RCC structures Provides comprehensive understanding, analysis, design and detailing of the structures Includes a detailed discussion on IS code related to wind and earthquake resistant design and its comparison with Euro, British and American codes Contains architectural drawings and structural drawings The book is aimed at researchers, professionals, graduate students in wind and earthquake engineering, design of RCC structures, modelling and analysis of structures, civil/infrastructure engineering.
Download or read book Tall buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2014-08-01 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 73: Tall Buildings is the result of a collaboration between the fib and MPA The Concrete Centre (UK). Task Group 1.6 High-rise buildings, within fib Commission 1: Structures, was drawn together with a mandate to write about the experience and know-how pertinent to the development, design and construction of tall concrete buildings. The group’s findings are presented in this state-of the-art report. Tall buildings are a unique challenge to engineers, even to those with extensive experience of low-rise structures. The bulletin explains the critical interfaces with other professionals, for example architects, building services engineers, façade and lift specialists, geotechnical engineers and wind specialists, highlighting how these parties interact with engineers and can influence and guide the development of the structural solution. The key factors in choosing the most appropriate structural system are discussed. The bulletin covers the criteria used to select the most economical structural elements including the foundations, the vertical elements and the floor slabs. Examples of common construction methods are presented and their effects on the structural engineering design are discussed. Tall buildings can undergo significant deformation during their construction and service life. These movements need to be understood by the designer and potentially compensated for in the design and during construction. One of the main particularities of the design of tall buildings is the dominance of the lateral loading from wind and seismic actions. The bulletin provides a discussion of these important topics and sets out the current approach taken by experienced engineers. Designers of tall buildings also need to understand the dynamic behaviour of the structure and confine the motion of the building to within acceptable limits. Approaches to damping and dynamic performance are discussed and guidance provided on the appropriate occupant comfort limits.
Download or read book Structural Foundations Manual for Low Rise Buildings written by Michael F. Atkinson and published by CRC Press. This book was released on 2003-11-04 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practical and buildable solutions for the design of foundations for housing and other low-rise buildings, especially those on abnormal or poor ground. A wealth of expert information and advice is brought together dealing with the key aspects a designer must consider in order to achieve effective and economic foundation designs. This second edition of Structural Foundations Manual for Low-Rise Buildings has been completely updated in line with the new government guidelines on contaminated land and brown-field sites. The book includes well-detailed design solutions and calculations, actual case histories, illustrations, design charts and check lists, making it a user-friendly reference for contractors, structural engineers, architects and students who have to deal with foundations for low-rise buildings on sites with difficult ground conditions.
Download or read book Dynamic Response of Reinforced Concrete Buildings written by Hajime Umemura and published by IABSE. This book was released on 1982 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reinforced Concrete Structures Analysis and Design written by Ph.D. S.E. P.E. David Fanella and published by Mcgraw-hill. This book was released on 2010-11-08 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: A PRACTICAL GUIDE TO REINFORCED CONCRETE STRUCTURE ANALYSIS AND DESIGN Reinforced Concrete Structures explains the underlying principles of reinforced concrete design and covers the analysis, design, and detailing requirements in the 2008 American Concrete Institute (ACI) Building Code Requirements for Structural Concrete and Commentary and the 2009 International Code Council (ICC) International Building Code (IBC). This authoritative resource discusses reinforced concrete members and provides techniques for sizing the cross section, calculating the required amount of reinforcement, and detailing the reinforcement. Design procedures and flowcharts guide you through code requirements, and worked-out examples demonstrate the proper application of the design provisions. COVERAGE INCLUDES: Mechanics of reinforced concrete Material properties of concrete and reinforcing steel Considerations for analysis and design of reinforced concrete structures Requirements for strength and serviceability Principles of the strength design method Design and detailing requirements for beams, one-way slabs, two-way slabs, columns, walls, and foundations
Download or read book Seismic Design Assessment and Retrofitting of Concrete Buildings written by Michael N. Fardis and published by Springer Science & Business Media. This book was released on 2009-07-25 with total page 757 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the historic first European seismic code, this professional book focuses on seismic design, assessment and retrofitting of concrete buildings, with thorough reference to, and application of, EN-Eurocode 8. Following the publication of EN-Eurocode 8 in 2004-05, 30 countries are now introducing this European standard for seismic design, for application in parallel with existing national standards (till March 2010) and exclusively after that. Eurocode 8 is also expected to influence standards in countries outside Europe, or at the least, to be applied there for important facilities. Owing to the increasing awareness of the threat posed by existing buildings substandard and deficient buildings and the lack of national or international standards for assessment and retrofitting, its impact in that field is expected to be major. Written by the lead person in the development of the EN-Eurocode 8, the present handbook explains the principles and rationale of seismic design according to modern codes and provides thorough guidance for the conceptual seismic design of concrete buildings and their foundations. It examines the experimental behaviour of concrete members under cyclic loading and modelling for design and analysis purposes; it develops the essentials of linear or nonlinear seismic analysis for the purposes of design, assessment and retrofitting (especially using Eurocode 8); and gives detailed guidance for modelling concrete buildings at the member and at the system level. Moreover, readers gain access to overviews of provisions of Eurocode 8, plus an understanding for them on the basis of the simple models of the element behaviour presented in the book. Also examined are the modern trends in performance- and displacement-based seismic assessment of existing buildings, comparing the relevant provisions of Eurocode 8 with those of new US prestandards, and details of the most common and popular seismic retrofitting techniques for concrete buildings and guidance for retrofitting strategies at the system level. Comprehensive walk-through examples of detailed design elucidate the application of Eurocode 8 to common situations in practical design. Examples and case studies of seismic assessment and retrofitting of a few real buildings are also presented. From the reviews: "This is a massive book that has no equal in the published literature, as far as the reviewer knows. It is dense and comprehensive and leaves nothing to chance. It is certainly taxing on the reader and the potential user, but without it, use of Eurocode 8 will be that much more difficult. In short, this is a must-read book for researchers and practitioners in Europe, and of use to readers outside of Europe too. This book will remain an indispensable backup to Eurocode 8 and its existing Designers’ Guide to EN 1998-1 and EN 1998-5 (published in 2005), for many years to come. Congratulations to the author for a very well planned scope and contents, and for a flawless execution of the plan". AMR S. ELNASHAI "The book is an impressive source of information to understand the response of reinforced concrete buildings under seismic loads with the ultimate goal of presenting and explaining the state of the art of seismic design. Underlying the contents of the book is the in-depth knowledge of the author in this field and in particular his extremely important contribution to the development of the European Design Standard EN 1998 - Eurocode 8: Design of structures for earthquake resistance. However, although Eurocode 8 is at the core of the book, many comparisons are made to other design practices, namely from the US and from Japan, thus enriching the contents and interest of the book". EDUARDO C. CARVALHO
Download or read book Probabilistic Design of Reinforced Concrete Buildings written by and published by . This book was released on 1972 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
