Download or read book Design of High Cycle Biaxial Fatigue Sample Near Resonance Using Finite Element Modeling written by Matthew Sorna and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue, the gradual accumulation of damage in of a material due to microstructural damage and subsequent crack growth, is prevalent among almost all components who sustain prolonged periods of cyclic loading. The number of loading cycles until failure is known as the fatigue life of a material, and is a function of the applied cyclic stress history. For certain materials and operating conditions, it is common to assume infinite fatigue life for stress amplitude levels below a certain value, known as the endurance limit. In this work, rectangular fatigue specimens were designed and simulated using finite element analysis software. Both free-free and fixed-free boundary conditions were studied to achieve a near resonance response assuming a commercially available shaker as the source of harmonic excitation. Eigenfrequency studies were used to determine resonant frequencies and time domain studies were used to simulate loading cycle histories. In the time domain analysis, special consideration was required for defining boundary conditions for valid finite element solutions. The results showed that nearly constant stress amplitude cycles were obtainable at the target stress of 140 MPa. By manipulating the free parameters of the shaker, a wide range of relatively low stress amplitudes can be generated to fully explore the high cycle (> 10^8 cycles) fatigue regime. Future work can be done to validate the simulated results, as well as design the appropriate mounting fixtures used to deliver the two boundary conditions used in the simulation. The proposed technique would allow measurement of high cycle fatigue properties, which can inform design choices and reduced costs associated with system failure and costs incurred through system downtime.
Download or read book Biaxial Multiaxial Fatigue and Fracture written by Andrea Carpinteri and published by Elsevier. This book was released on 2003-03-19 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: The European Structural Integrity Society (ESIS) Technical Commitee on Fatigue of Engineering Materials and Structures (TC3) decided to compile a Special Technical Publication (ESIS STP) based on the 115 papers presented at the 6th International Conference on Biaxial/Multiaxial Fatigue and Fracture. The 25 papers included in the STP have been extended and revised by the authors. The conference was held in Lisbon, Portugal, on 25-28 June 2001, and was chaired by Manual De Freitas, Instituto Superior Tecnico, Lisbon. The meeting, organised by the Instituto Superior Tecnico and sponsored by the Portuguese Minesterio da Cienca e da Tecnologia and by the European Structural Integrity Society, was attended by 151 delegates from 20 countries. The papers in the present book deal with the theoretical, numerical and experimental aspects of the Multiaxial fatigue and fracture of engineering materials and structures. They are divided in to the following six sections; Multiaxial Fatigue of Welded Structures; High cycle Multiaxial fatigue; Non proportional and Variable-Amplitude loading; Defects, Notches, Crack Growth; Low Cycle Multiaxial Fatigue; Applications and Testing Methods. As is well-known, most engineering components and structures in the mechanical, aerospace, power generation, and other industries are subjected to multiaxial loading during their service life. One of the most difficult tasks in design against fatigue and fracture is to translate the information gathered from uniaxial fatigue and fracture tests on engineering materials into applications involving complex states of cyclic stress-strain conditions. This book is the result of co-operation between many researchers from different laboratories, universities and industries in a number of countries.
Download or read book Designing for High Cycle Biaxial Fatigue Using Surface Strain Records written by DL. McDiarmid and published by . This book was released on 1985 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: A method of designing for high-cycle biaxial fatigue using surface strain records is proposed. The irregular strain records are first idealized to cycles of constant amplitude to enable a first estimate of long-life capability to be made from allowable surface strain envelopes. These are developed from a criterion of failure under biaxial fatigue based on material bending and twisting fatigue properties. Methods of determining likely crack growth directions are also proposed. Important parameters to be considered in refining the initial approximate analysis are discussed.
Download or read book Biaxial and Multiaxial Fatigue EGF 3 written by M. W. Brown and published by . This book was released on 1989 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 36 paper spresented in this volume were presented at the second international conference on biaxial/multiaxial fatigue.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book High Cycle Fatigue written by Theodore Nicholas and published by Elsevier. This book was released on 2006-07-07 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr Theodore Nicholas ran the High Cycle Fatigue Program for the US Air Force between 1995 and 2003 at Wright-Patterson Air Force Base, and is one of the world's leading authorities on the subject, having authored over 250 papers in leading archival journals and books. Bringing his plethora of expertise to this book, Dr Nicholas discusses the subject of high cycle fatigue (HCF) from an engineering viewpoint in response to a series of HCF failures in the USAF and the concurrent realization that HCF failures in general were taking place universally in both civilian and military engines. Topic covered include: - Constant life diagrams - Fatigue limits under combined LCF and HCF - Notch fatigue under HCF conditions - Foreign object damage (FOD) - Brings years of the Author's US Air Force experience in high cycle fatigue together in one text - Discusses HCF in the context of recent international military and civilian engine failures
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1987 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1998 with total page 920 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Testing and Analysis written by Yung-Li Lee and published by Elsevier. This book was released on 2011-04-18 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Testing and Analysis: Theory and Practice presents the latest, proven techniques for fatigue data acquisition, data analysis, and test planning and practice. More specifically, it covers the most comprehensive methods to capture the component load, to characterize the scatter of product fatigue resistance and loading, to perform the fatigue damage assessment of a product, and to develop an accelerated life test plan for reliability target demonstration. This book is most useful for test and design engineers in the ground vehicle industry. Fatigue Testing and Analysis introduces the methods to account for variability of loads and statistical fatigue properties that are useful for further probabilistic fatigue analysis. The text incorporates and demonstrates approaches that account for randomness of loading and materials, and covers the applications and demonstrations of both linear and double-linear damage rules. The reader will benefit from summaries of load transducer designs and data acquisition techniques, applications of both linear and non-linear damage rules and methods, and techniques to determine the statistical fatigue properties for the nominal stress-life and the local strain-life methods. - Covers the useful techniques for component load measurement and data acquisition, fatigue properties determination, fatigue analysis, and accelerated life test criteria development, and, most importantly, test plans for reliability demonstrations - Written from a practical point of view, based on the authors' industrial and academic experience in automotive engineering design - Extensive practical examples are used to illustrate the main concepts in all chapters
Download or read book Japanese Science and Technology 1983 1984 written by United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch and published by . This book was released on 1985 with total page 1080 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA SP written by and published by . This book was released on 1986 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue Testing and Analysis of Results written by W. Weibull and published by Elsevier. This book was released on 2013-10-22 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue Testing and Analysis of Results discusses fundamental concepts of fatigue testing and results analysis. The book begins with a description of the symbols and nomenclature selected for the present book, mainly those proposed by the ASTM Committee E-9 on Fatigue. Fatigue testing methods are then discussed including routine tests, short-life and long-life tests, cumulative-damage tests, and abbreviated and accelerated tests. Separate chapters cover fatigue testing machines and equipment; instruments and measuring devices; and test pieces used in fatigue testing. The factors affecting test results are considered, including material, types of stressing, test machine, environment, and testing technique. The final two chapters cover the planning of test programs and the presentation of results. Test program planning involves the statistical design of a test series; specification and sampling of test pieces; and choice of test pieces, testing machines, and test conditions. The chief purpose of most fatigue tests is the experimental determination of the relation between the endurance and the magnitude of the applied stress range for the material and the specimen under consideration, and final results can be condensed into a table, graph, or analytical expression.
Download or read book Mechanics of Fretting Fatigue written by D.A. Hills and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: Failures of many mechanical components in service result from fatigue. The cracks which grow may either originate from some pre-existing macroscopic defect, or, if the component is of high integrity but highly stressed, a region of localized stress concentration. In turn, such concentrators may be caused by some minute defect, such as a tiny inclusion, or inadvertent machining damage. Another source of surface damage which may exist between notionally 'bonded' components is associated with minute relative motion along the interface, brought about usually be cyclic tangential loading. Such fretting damage is quite insidious, and may lead to many kinds of problems such as wear, but it is its influence on the promotion of embryo cracks with which we are concerned here. When the presence of fretting is associated with decreased fatigue performance the effect is known as fretting fatigue. Fretting fatigue is a subject drawing equally on materials science and applied mechanics, but it is the intention in this book to concentrate attention entirely on the latter aspects, in a search for the quantification of the influence of fretting on both crack nucleation and propagation. There have been very few previous texts in this area, and the present volume seeks to cover five principal areas; (a) The modelling of contact problems including partial slip under tangentialloading, which produces the surface damage. (b) The modelling of short cracks by rigorous methods which deal effectively with steep stress gradients, kinking and closure. (c) The experimental simulation of fretting fatigue.
Download or read book The Finite Element Method and Applications in Engineering Using ANSYS written by Erdogan Madenci and published by Springer. This book was released on 2015-02-10 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers theoretical and practical knowledge of the finite element method. The book equips readers with the skills required to analyze engineering problems using ANSYS®, a commercially available FEA program. Revised and updated, this new edition presents the most current ANSYS® commands and ANSYS® screen shots, as well as modeling steps for each example problem. This self-contained, introductory text minimizes the need for additional reference material by covering both the fundamental topics in finite element methods and advanced topics concerning modeling and analysis. It focuses on the use of ANSYS® through both the Graphics User Interface (GUI) and the ANSYS® Parametric Design Language (APDL). Extensive examples from a range of engineering disciplines are presented in a straightforward, step-by-step fashion. Key topics include: • An introduction to FEM • Fundamentals and analysis capabilities of ANSYS® • Fundamentals of discretization and approximation functions • Modeling techniques and mesh generation in ANSYS® • Weighted residuals and minimum potential energy • Development of macro files • Linear structural analysis • Heat transfer and moisture diffusion • Nonlinear structural problems • Advanced subjects such as submodeling, substructuring, interaction with external files, and modification of ANSYS®-GUI Electronic supplementary material for using ANSYS® can be found at http://link.springer.com/book/10.1007/978-1-4899-7550-8. This convenient online feature, which includes color figures, screen shots and input files for sample problems, allows for regeneration on the reader’s own computer. Students, researchers, and practitioners alike will find this an essential guide to predicting and simulating the physical behavior of complex engineering systems."
Download or read book Metals Abstracts written by and published by . This book was released on 1999 with total page 1014 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aeronautical Engineering written by and published by . This book was released on 1986 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: A selection of annotated references to unclassified reports and journal articles that were introduced into the NASA scientific and technical information system and announced in Scientific and technical aerospace reports (STAR) and International aerospace abstracts (IAA).
Download or read book Fatigue Design written by Eliahu Zahavi and published by CRC Press. This book was released on 2019-01-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern analytical theories of fatigue coupled with a knowledge of processing effects on metals make up the sound basis for designing machine parts that are free from unexpected failure. Fatigue Design: Life Expectancy of Machine Parts provides the information and the tools needed for optimal design. It highlights practical approaches for effectively solving fatigue problems, including minimizing the risk of hidden perils that may arise during production processes or from exposure to the environment.The material is presented with a dual approach: the excellent coverage of the theoretical aspects is accented by practical illustrations of the behavior of machine parts. The theoretical approach combines the fundamentals of solid mechanics, fatigue analysis, and crack propagation. The chapters covering fatigue theories are given special emphasis, starting with the basics and progressing to complicated multiaxial nonlinear problems.The practical approach concentrates on the effects of surface processing on fatigue life and it illustrates many faceted fatigue problems taken from case studies. The solutions demonstrate the authors' detailed analyses of failure and are intended to be used as preventive guidelines. The cases are a unique feature of the book. The numerical method used is the finite element method, and is presented with clear explanations and illustrations.Fatigue Design: Life Expectancy of Machine Parts is an extremely valuable tool for both practicing design engineers and engineering students.
